pls experts help me fix this.
i got m8 whl for flash new rom.
after i flashed RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426232_signed_2.exe
i lost imei and base band then again i try
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_446220_signed_2.exe
with this file also no imie or baseband ,
then i start mess my self.
i was root phone then change mid to europe, then phone start to restart it self, then i was wiped all in TWRP.
then try install RUU_M8_UL_L50_SENSE60_MR_HTC_Europe_4.16.401.10_Radio_1.25.214500021.06G_20.68.4196t.01_F_release_417003_signed.exe
its failed then again try flash sprint rom now that also false
then i try ViperOneM8+5.0.1.zip rom
its flash done but reboot bootloader,
then try with cm-13.0-20160208-NIGHTLY-m8.zip
then its keep restart CM logo
now last try i gave for Bad_Boyz_Sprint_ONE_M8_Marshmallow_v4.0.zip
now its say this device is not M8 WHL and its false and stop instaling
bellow is getvarr all details(now status) imei show corect from beginning to now in fast boot mode but meid was zeros from start.
MID was modelid: 0P6B70000 before i change.
this phone customer purchase while is in Singapore.
C:\Users\143\Desktop\Dream\android-sdk-windows\platform-tool
l
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT45P*******
(bootloader) imei: 990**********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
pls i need help from experts.
Change your MID back to Sprint then run this RUU (choose the correct one for your device)
[how to] change your MID without an eng bootloader
Non H/K = RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651 .14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_42 6232_signed_2.exe
H/K = RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4 .25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_rel ease_446220_signed_2.exe
Sloth said:
Change your MID back to Sprint then run this RUU (choose the correct one for your device)
[how to] change your MID without an eng bootloader
Non H/K = RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651 .14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_42 6232_signed_2.exe
H/K = RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4 .25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_rel ease_446220_signed_2.exe
Click to expand...
Click to collapse
bro thank u so much fast reply,
but my problem is to change the MID again i must power on phone and put in ADB mode
at the moment phone can go fast boot and recovery mode only, cannot flash with any files to power on,
i need help for change mid in fast boot or recovery or must change product id m8_WHL to m8_UL then it will fix.
i think this is only solution????
but dont know how to do with fastboot or recovery mode
If you change it to m8_UL it will not work it has to remain Sprint if you want a working phone.
You can issue adb commands from recovery...not 100% sure it will work so try at your own risk.
Sloth said:
If you change it to m8_UL it will not work it has to remain Sprint if you want a working phone.
You can issue adb commands from recovery...not 100% sure it will work so try at your own risk.
Click to expand...
Click to collapse
my dear bro, u was correct that ADB comands work on recovery mode and now MID back sprint
new get var all.
but still ERROR 155 with all RUU exe
C:\Users\143\Desktop\Dream\android-sdk-windows\platf
l
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT45***********
(bootloader) imei: 99000***********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Which RUU are you trying to use?
He tried to flash Bad boyz 4.0 M ROM so possible that he went for the 6.20 RUU.
fazargsm said:
my dear bro, u was correct that ADB comands work on recovery mode and now MID back sprint
new get var all.
but still ERROR 155 with all RUU exe
Click to expand...
Click to collapse
after i change with older hboot zip flashing done with
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_4.25.651.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426232_signed_2.exe
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_446220_signed_2.exe
these both files but no imei and baseband unknown problem. but with fast boot show all imei and radio ver.
bellow getvar all details with both flashed files.
is that no problem MEID is 14 zeros????
pls tel me what i did wrong?????
pls help me now fix imei base band problem.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.25.651.14
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT4********
(bootloader) imei: 990004*********
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 26d3ff23
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.25.654.18
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT45PSF0*****
(bootloader) imei: 99000499*******
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 631e3609
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.021s
Click to expand...
Click to collapse
Do you have the Harmon Kardon Edition M8?
Sloth said:
Do you have the Harmon Kardon Edition M8?
Click to expand...
Click to collapse
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4 .25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_rel ease_446220_signed_2.exe
this one is H/K????
i was flashed with both roms.
fazargsm said:
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4 .25.654.18_Radio_1.09.20.0209_NV_SPCS_1.52_003_rel ease_446220_signed_2.exe
this one is H/K????
i was flashed with both roms.
Click to expand...
Click to collapse
What does your boot loader say not what you're trying to flash.
EVOuser94 said:
What does your boot loader say not what you're trying to flash.
Click to expand...
Click to collapse
phone is now on after flash that above firmware but say no sim , some times show imei and baseband some times show unknown what issue that could be?????
bro maybe its phone sim locked???
its always say no sim, but show imei and baseband, in *#*#4636#*#* menu i cant on off radio option(its keep on and after i slect Turn off Radio nothing happen) after i select gsm only or gsm and umts its automatically change to CDMA evdo option,
all ways show no sim some times show preparing sim then again no sim. thats the problem now i have..
really thank u so much for helping me.
i think my problem is MEID 000000000 as i follow on
http://forum.xda-developers.com/spr...d-problems-t3253678/post65086461#post65086461
this post number 5,
as i know MEID must same as IMEI and without last digit,
but in my phone MEID 000000 i was try
fastboot writemeid 99********* this comand but not done
pls any one know write meid comand on fast boot or adb?????
Related
Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
fc3211 said:
Hello There,
I have AT&T m7 and recently just S-OFF
I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom
But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)
Here is the output before I began:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
ANd here is the output afterwards:
Code:
[email protected] ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Please help me, I dont know what I did wrong.
Click to expand...
Click to collapse
You flash stock RUU.exe
Sent from my HTC One using XDA Free mobile app
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
fc3211 said:
I did not flash the RUU, I had flashed the firmware 7.15.401.1 from https://docs.google.com/spreadsheets/d/1LQDLpVZYyUpXPgC2sh1BvAS9Oo8B-fTiZU_JhpIH-fU/pubhtml#
And I am thinking that I overwrote the radio with a version that is not proper for my phone.
But I dont really have alot of knowledge about this so please advise me.
Click to expand...
Click to collapse
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Seanie280672 said:
it wont effect your phone in that way, if you have signal, then go into your apn settings and reset them to defaults, you will then be taken to the first start up page again and have to select your operator again from the list of available operators, like you did when you first got the phone or when you install a new rom.
remove you IMEI and Serial number from your first post, its not good to post them, they guy who quoted you will also need to do the same.
Click to expand...
Click to collapse
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
fc3211 said:
Are you certain about this? The fastboot output indicates that the baseband has changed since I flashed the new firmware
Click to expand...
Click to collapse
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Seanie280672 said:
just try it, its not going to hurt, just goto settings - mobile data - access point names - (3dot menu in the top right corner) select that and then select reset defaults.
Of course the baseband has changed, the newer firmware had a newer radio file in it, its not a radio file like your thinking though, its more of a software controller for a piece of hardw2are in your phone, just like every piece of hardware on your computer needs a driver, so does your phone.
The 401 firmware you flashed is basically WWE (World Wide English), if it had messed up you'd probably be hard bricked.
Click to expand...
Click to collapse
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
@ Seanie280672: Thanks for your help bro
It just started working again after I installed ViperRom 7
Strange thing, just started working out of the blue but I am happy that is is resolved
fc3211 said:
THanks, for explaining that to me
I just tried the same sim card in my galaxy s3 mini (unlocked) and it doesnt work in that phone at all (no calls or data). I think the sim may be defective, will get a new one and try again.
Thanks for your help
Edit: I did as you said in the m7 and even did a factory reset to make sure and results where the same. Looks like I got a bad sim card
Click to expand...
Click to collapse
I got a MEM_UL with S-OFF and cid 11111111 , sim is working but problem is its loaded with demo apk, phone automatically resets after a certain time. details here
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.101.1102.16.21_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.401.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH46HWR02188
(bootloader) imei: 35xxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mem_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P8B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d06a629a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
as the phone is S-OFF and CID 11111111 I've tried flashing these roms
0P8BIMG_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.18.401.3_Radio_1.101.1102.19.1017_10.26.4149.00L_release_402779_combined_signed_2_4
0P8BIMG_M8_MINI_UL_K44_SENSE60_H3G_AT_1.01.776.1_Radio_1.101.1102.19.0708_10.24.4149.00L_release_391650_combined_signed_2_4
0P8BIMG_M8_MINI_UL_K44_SENSE60_O2_UK_1.16.206.2_Radio_1.101.1102.16.21_2_10.19.4149.00_1_release_372226_signed_2_4
flashing done and demo apk comes within 2min after power on. Don't tell me to factory reset/Hard reset bla bla, I've done all those. Its somewhere in secure partitions, I don't know.
Anyone can help?
How can I s-off HTC One Mini 2?
Ye same here need s off
nasirahmed said:
I got a MEM_UL with S-OFF and cid 11111111 , sim is working but problem is its loaded with demo apk, phone automatically resets after a certain time. details here
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.101.1102.16.21_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.401.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH46HWR02188
(bootloader) imei: 35xxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mem_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P8B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d06a629a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
as the phone is S-OFF and CID 11111111 I've tried flashing these roms
0P8BIMG_M8_MINI_UL_K44_SENSE60_HTC_Europe_2.18.401.3_Radio_1.101.1102.19.1017_10.26.4149.00L_release_402779_combined_signed_2_4
0P8BIMG_M8_MINI_UL_K44_SENSE60_H3G_AT_1.01.776.1_Radio_1.101.1102.19.0708_10.24.4149.00L_release_391650_combined_signed_2_4
0P8BIMG_M8_MINI_UL_K44_SENSE60_O2_UK_1.16.206.2_Radio_1.101.1102.16.21_2_10.19.4149.00_1_release_372226_signed_2_4
flashing done and demo apk comes within 2min after power on. Don't tell me to factory reset/Hard reset bla bla, I've done all those. Its somewhere in secure partitions, I don't know.
Anyone can help?
Click to expand...
Click to collapse
Have you tried freezing the demo apk? You can do it from ADB
Code:
adb shell pm disable "john.apk"
Add the name of the exact name of the apk file in place of "john.apk" (without the quotes)
Did u jist try to unlock bootloader and flash twrp recovery and then flash my own stock rom .. maybe your problem will be fixed
Will972 said:
Did u jist try to unlock bootloader and flash twrp recovery and then flash my own stock rom .. maybe your problem will be fixed
Click to expand...
Click to collapse
Demo devices have a CID of HTC_002, Demoflow is present in all HTC Roms & kicks in when this CID is present.
You need to S-Off and change your CID "fastboot writecid 11111111" is supercid meaning you can flash any RUU and no more demoflow..
Alternative option is to htc unlock, flash twrp and remove the demo flow app, there will be 1 in system/app that is installed as the system is built, and one in /system/etc/.demoflow..
using the later would stop any OTA updates moving forward
I updated my phone using the ruu from htc but i used the wrong one i believe I unlocked my phone from tmo and used a tmo update now i cant edit my apns please help
yungvilleprod said:
I updated my phone using the ruu from htc but i used the wrong one i believe I unlocked my phone from tmo and used a tmo update now i cant edit my apns please help
Click to expand...
Click to collapse
Which ruu version did you flashed?
What is the output of "fastboot getvar all"
Why can't you edit your apn? Its grayed out?
alray said:
Which ruu version did you flashed?
What is the output of "fastboot getvar all"
Why can't you edit your apn? Its grayed out?
Click to expand...
Click to collapse
HTC One 7.18.531.2 official ruu from the htc website
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW901053
(bootloader) imei: 355972054404836
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s
the image posted
yungvilleprod said:
HTC One 7.18.531.2 official ruu from the htc website
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW901053
(bootloader) imei: 355972054404836
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s
the image posted
Click to expand...
Click to collapse
Strange first time i see this. Are you sure your phone is sim-unlocked? Might be related to the TMO version installed on the phone. Maybe you could a try a custom rom or to convert to the international version (7.19.401.2) but will require s-off.
alray said:
Strange first time i see this. Are you sure your phone is sim-unlocked? Might be related to the TMO version installed on the phone. Maybe you could a try a custom rom or to convert to the international version (7.19.401.2) but will require s-off.
Click to expand...
Click to collapse
The phone is def sim unlocked because i unlocked it before i updated. I was hoping to stay stock.....
I got to work now the apns magically save and are available now.....
yungvilleprod said:
I got to work now the apns magically save and are available now.....
Click to expand...
Click to collapse
How did you resolve this issue? Experiencing the same thing (Greyed out Edit APN option) and would like to know how to fix it
hey I just bought a HTC ONE M7 and am with Koodo in Canada. I, like an idiot, wiped my phone without checking how to recover. My phone is wiped now. Is it possible to reinstall Androir on it? Where could I find the proper RUU? can you help? Koodo told me to through it out! I'm not entirely sure why? Thanks
pascal874 said:
hey I just bought a HTC ONE M7 and am with Koodo in Canada. I, like an idiot, wiped my phone without checking how to recover. My phone is wiped now. Is it possible to reinstall Androir on it? Where could I find the proper RUU? can you help? Koodo told me to through it out! I'm not entirely sure why? Thanks
Click to expand...
Click to collapse
Please post the output of "fastboot getvar all" (remove your IMEI/SN before posting)
Is your bootloader locked / unlocked / re-locked ?
alray said:
Please post the output of "fastboot getvar all" (remove your IMEI/SN before posting)
Is your bootloader locked / unlocked / re-locked ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.26.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.19.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC23W457887
(bootloader) imei: 355805860987654
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3995mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
can u suggest me which ruu should i download and from where?bootloader is locked
hamzabutt322 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.26.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.19.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC23W457887
(bootloader) imei: 355805860987654
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3995mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
can u suggest me which ruu should i download and from where?bootloader is locked
Click to expand...
Click to collapse
Your phone is a M7CDUG, this is the China Unicom model, not the best choice if you're going to use it on Koodo. The 2.19.401.1 ruu for this model can be found here https://forum.xda-developers.com/showthread.php?t=2617159
alray said:
Your phone is a M7CDUG, this is the China Unicom model, not the best choice if you're going to use it on Koodo. The 2.19.401.1 ruu for this model can be found here https://forum.xda-developers.com/showthread.php?t=2617159
Click to expand...
Click to collapse
the file has been removed from mega.
the other link on that website is not working for me?
is there any other link?
and sorry for late reply. I am from Pakistan and i need this ruu urgently because my phone restarts after 3 minutes approx.
Good evening I have a HTC M7ul which purchase was working perfectly asked me upgrade and did, my biggest surprise is that after the restart upgrade and run out signal look for the IMEI and says unknown seek baseband and is also in unknown eh I tried everything Official Ruu probe Rom cooked and nothing and nothing to make matters worse this S-On and HBOOT at 1.61 please i need your help to find out who could do amazing is that all getvar fastboot everything appears normal ....... ...
excuse my bad English
E:\HTC\adb nuevo>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34######
(bootloader) imei: 355#########
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3854mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Report Post
calipjazz said:
Good evening I have a HTC M7ul which purchase was working perfectly asked me upgrade and did, my biggest surprise is that after the restart upgrade and run out signal look for the IMEI and says unknown seek baseband and is also in unknown eh I tried everything Official Ruu probe Rom cooked and nothing and nothing to make matters worse this S-On and HBOOT at 1.61 please i need your help to find out who could do amazing is that all getvar fastboot everything appears normal ....... ...
excuse my bad English
E:\HTC\adb nuevo>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34######
(bootloader) imei: 355#########
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3854mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Report Post
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc...ruu-t-mobile-htc-one-m7-lollipop-5-0-t3051327
nkk71
nkk71 said:
http://forum.xda-developers.com/htc...ruu-t-mobile-htc-one-m7-lollipop-5-0-t3051327
Click to expand...
Click to collapse
install the ruu RUU M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35. 3218.16_10.33Q.1718.01L_release_421697 but I did not solve the problem I'm still in S-on what should I do?
calipjazz said:
install the ruu RUU M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35. 3218.16_10.33Q.1718.01L_release_421697 but I did not solve the problem I'm still in S-on what should I do?
Click to expand...
Click to collapse
after a successful ruu, try a factory reset, if that doesnt fix the missing baseband/imei/etc, then it could be a hardware issue
nkk71
nkk71 said:
after a successful ruu, try a factory reset, if that doesnt fix the missing baseband/imei/etc, then it could be a hardware issue
Click to expand...
Click to collapse
go to the technical service?
calipjazz said:
go to the technical service?
Click to expand...
Click to collapse
yes, i think so, unless anybody has any other idea, i've only seen this in 2 possible cases:
1- bad hardware -> needs to be fixed
2- RUU flash, restores/reinitializes radio and modem