I have had the e6533 dual for 5 months now. Just recently my quick charge 2.0 adapter has damaged the charger board of the phone itself the reason I know this is because when I now plug it into the quick charge 2.0 adapter and it engages the green light, makes a chime, flashes a green light again and shuts off this never happened before. Before the light would stay solid and it would continue to charge. At this point it stops charging this indicates that something has happened to the phone because when tested with other known good phones the charger still works!! Also other 2.0 chargers are the same problem. It's just recently I've noticed that it will not even identify USB data on my computer this all happened after buying a bunch of quick charge 2.0 adapters. All working phone won't.. Even on other brands..
Though I can still use a 2.0 amp charger but not the stock 1.5!?!
Sent from my E6533 using XDA Free mobile app
Related
I'm having problems with kaiser charging when using HSDPA and even slow connections like 3G and EDGE.
Problem is that it charges for about 20-30 minutes (connected to a powered 1Amp USB hub or even with AC charger), then charging light goes off and battery power starts to drop by about 5% every 20-30 minutes.
Have anyone tried 2Amp chargers? It seems like it may be the problem with kaiser itself, since it charges itself but then just stops and will not charge itself until I soft-reset it.
PS: it gets kinda warm, but I wouldn't call it hot. Dunno if its related to temperature.
Any ideas?
Am I the only one with this problem? If so, maybe I should return the phone and exchange it for a working unit?
No, I have the same problem here.
When I use my kaiser in the car (usually navigating) the orange charge light initially lights up, but after a short period goes out. When I disconect and connect the USB-cable, the light temporarily comes on again.
I am using a 1A car charger. I do notice the charger feels a bit hot when in use, so maybe the kaiser is drawing more power than allowed? I can imagine the charger overheating which causes the voltage to drop. Which probably causes the kaiser to stop using USB power. But this is all speculation.
I am planning to use a 5A voltage regulator to 'upgrade' the USB charger, and see if this solves the problem.
--After a bit more reading, I found some info about the kaiser detecting if it is connected to a charger or a USB host device, and regulating it's maximum charge power accordingly. So I will try a modified USB cable to let the kaiser know it can get 1000mA from the car charger.
It's not the USB charger. I have 2A and 3A Olympus Camera chargers that I modified to use as a USB charger. Also cheaper 1A AC chargers. I thought the Olympus chargers would be perfect, because they were high amperage, and built solidly. I had the same charge problems with the TyTn II, and an iPod Nano. They would either charge partially and then stop, or not charge right away, but the charge light would come on after awhile. But still only partially charge.
My guess is that the chargers that work may have a load added in, so that the switching regulator will turn on with any additional load from the device, and stay on. I never found any information on this, though.
What does work: The USB chargers made for any PDA phone. Apple iPod chargers. I bought an 800ma iPod charger (probably a clone). It's a small white cube, with a USB outlet, and interchangeable AC plugs. It charges the Nano, and the TyTn II OK. The Nano last for a week now, instead of 2 days. The TyTn II starts charging right away, and stays charging. So whatever the Apple USB chargers do, they do work.
A thought for the car is to get a car charger made for the iPod, and see if that may work.
To be more accurate, the iPod charger starts charging the TyTn II right away, and the charge light stays lit. I've not actually done a controlled test on it. Just charged for awhile, and verified that the charge light comes on right away, and stays on. Everything looks normal, though. I will try a more controlled test, and post the resutls.
please keep us posted. I've also contaced HTC support about this, I'm waiting the response. Once I found out I will post here.
Hopefully iys not a ksier limitation.
Test results.
Battery at
- 61%, Display off while charging
- 83% - after 70 mins of charging. Then stopped, as was going out.
Started again at:
- 88%, Display off
- 100% - after 60 mins. A little shorter, probably, as I missed when the charge light went green.
I believe the PDA will fast charge up to around 80%, and then slow charge for the remainder. That would explain why it takes 60 mins to charge from 88% to 100%.
So, the iPod charger works great for a PDA, and will start charging right away when it is connected, and it will charge to 100% full charge. It is not the PDA that is stopping the charging. It just has special requirements that only some chargers can handle, so you have to get either a charger built for a PDA, or something like the iPod charger.
So it works quite well as a general purpose charger for iPods, and for the TyTn II, and probably anything that uses a USB charger. It is small, with interchangeable AC plugs. A good travel/general purpose charger. I can bring just this, and different cables for different devices. Phone, MP3, etc.
It is labeled Input:100-240V, Output 5V 1A
Looks like:
Apple MA592LL/A iPod USB Power Adapter
Just as an aside, I have a lithium battery pack 2 7/8" x 2 1/8" x 1/2" thick. It is rated at 2400mAh, input 5V, through a built in retractable USB plug. Output is 5V 450mAh through a female USB plug. Just extend the USB male plug and plug into any USB source to charge it. It works quite well as a small portable battery pack to power/charge a PDA if using GPS steadily. It's flat, and easy to carry.
And it is quite cheap.
ttt123, thanks for your info. I guess I need to get an iPod charger then.
When I first got the phone earlier this week, I could plug it into the charger in the wall just fine with no issues, it would just charge. Now suddenly it started telling me USB connected and goes to the MTP screen and of course locks up the phone.
I can of course bypass this by switching the phone to mass storage mode, but since I have Kies and use it occasionally, it would be nice to not have to switch that setting each time depending on my charging/syncing situation.
Why would it have not locked it up with the MTP screen originally when charging from the wall but now it does? The results are the same whether its plugged into the wall or the USB port on the computer. I have two Captivates bought brand new on a family plan, both do this now with any combination of chargers and USB cables, wall USB port, or car charger. Neither one has a common application installed since the other is my girlfriends who hasnt done much to it yet, so Im blaming the phone itself for now...
~T.J.
Interesting. I just checked with my BB charger and they dont do it using that charger, but they do it as soon as I connect the stock charger again.
Im wondering if its a voltage sensing circuit thats tripping due to the different voltages which should be applied - either wall charger or USB port. Maybe for some reason my wall chargers arent putting out enough voltage and its thinking its a USB port, but the BB charger is putting the right amount of voltage out?
Am I on base as to how it differentiates between wall or USB port? The number of pins obviously doesnt matter as all the cables have all the pins in them, unlike some charger cables which only have the power and ground. The only thing I can think of is that it uses the amount of voltage/current to tell the difference and create its reaction.
~T.J.
Sounds like a problem with the stock charger, maybe usb cable alignment. My iphone wall adapter does this with the samsung cable but the samsung wall adapter doesn't, same with my car charger from att. Also I have a $5 walmart car charger that has a cable that splits into both a mini usb and a micro usb that isn't a real usb cable, it's charge only. That cable has no problem on any wall or car adapter. I believe the phone detects if its connected by checking voltage on a data pin (just a guess really) so if a nonstock charger is used it assumes that it is a computer. But it may also be a data signal that is given off by the charger.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
did you try a new charger and if so, did it work? I've had my captivate since Thursday and on Thursday it charged and everything fine, but then yesterday,
a) no computer I connect it to while recognize it, no matter what I have it set too and have latest drivers installed
b) if I charge it, after I unplug it, it locks up to black screen and I have to remove the battery to get it to work
c) I also have an in-dash touchscreen monitor in my car that has a usb port because it works with an ipod. I plugged the usb into to use it as a car charger, unplugged it, same thing
d) it did say usb connected after it was unplugged, but I switched from mass storage to ask on connection and it went away
so is an actual wall charger the solution?
Sent from my SAMSUNG-SGH-I897 using XDA App
and now I unplug it, and if it locks, it will not unlock, just black screen
I have to take out the battery and then only way to get it to turn back on, is to plug it back in the wall
Sent from my SAMSUNG-SGH-I897 using XDA App
^^^Ouch that's not right, if you can't figure it out you may need to re-flash or just bring it back under warranty, or insurance
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Hey guys, I just bought my One a couple weeks ago and I'm loving it so far. However, I'm having an issue with the USB charging speed.
I know USB charging speed is slower than wall charging speeds, but the speeds I have been getting are ridiculous. To charge my phone from 0-100 takes about 9 hours over USB when the phone is in sleep mode and not being used. Can anyone else tell me if they're getting the same kind of extremely slow USB charging speeds? Is this normal for the phone? I've been thinking about replacing it and seeing how the next one fares.
I'm charging in usb 3.0 port and takes 5h
Sent from my HTC One using Tapatalk 2
I haven't timed it, but yes USB charging is very slow in general and especially on this phone. I've had several HTC Ones, and had the same experience.
Sent from my HTC One
coisman said:
Hey guys, I just bought my One a couple weeks ago and I'm loving it so far. However, I'm having an issue with the USB charging speed.
I know USB charging speed is slower than wall charging speeds, but the speeds I have been getting are ridiculous. To charge my phone from 0-100 takes about 9 hours over USB when the phone is in sleep mode and not being used. Can anyone else tell me if they're getting the same kind of extremely slow USB charging speeds? Is this normal for the phone? I've been thinking about replacing it and seeing how the next one fares.
Click to expand...
Click to collapse
Some Kernels have an option for fast charge which is supposed to help with it but certain usb ports only put out a certain amount of power. Also I know a problem with the OG note was with fast charge enabled a few charging ports burnt out (mine included). It was easy to replace them on that phone but this one will be more difficult if it does the same thing.
The problem is that the phone sees the difference between an AC charger and a usb charger. With an AC charger it can charge with a maximum around 850mA while with an USB charger it charges with an maximum of 500mA.
There properbly is a trick how to make the phone think it's on AC charger, while it's actually on an USB charger, and therefore charge with a higher current, but I haven't found out how yet.
Bart1981 said:
The problem is that the phone sees the difference between an AC charger and a usb charger. With an AC charger it can charge with a maximum around 850mA while with an USB charger it charges with an maximum of 500mA.
There properbly is a trick how to make the phone think it's on AC charger, while it's actually on an USB charger, and therefore charge with a higher current, but I haven't found out how yet.
Click to expand...
Click to collapse
Depends on the current battery level of the phone. Anything above 83%(somewhere around there), even on AC charger it will slow down to 500mAh at most.
Hi! Here on XDA I found few similar situations, with various phone models, but no right answer...
I have a brand new battery (but same situation was with the old one) and when I connect my Note to the PC USB connector or when I plug it in my car charger, phone is still discharging if the screen is on. If the screen is off and if I close all apps, wi-fi and GPS it is charging but very, very, very slowly. Only if I plug phone into wall charger it doesn't matter if the screen is on or off, is it wi-fi or GPS turned on or off, phone is charging normally. I try few different cables, but still the same. Computer have only USB 2.0 and 3.0 ports so it isn't a USB 1.1 case. I have also HTC HD2 and it is charging normally no matter where it is plugged - wall, PC, car (same chargers, same cables, same PC...) HD2 is charging in my car even if the GPS and navigation is turned on.
Any thoughts?
Thank you!
Laptops tend to only put out 500ma which isn't typically enough for the Note. It cod be a mixture of low amperage chargers and slow charging cables. The Note (imo) is pretty inefficient on stock roms.
Sent from my Nexus 7 using XDA Free mobile app
Thank you! I'm not charging it over laptop, but over desktop PC and in my car. I try to charge it with Samsung original cables, with HTC original cables and with cheap china made cables, all 3 cases - same. Also I'm not using stock ROM but SOKP KITKAT ROM
Hi There,
Need some help/advice,
My TP 32Gb, running 7.1.1 has had a problem recently with charging. It always charges when it is first switched on, if left the screen switches off and the charging light goes out and then no further charging happens. It wonder if I should leave the screen on all the time, this way it will continue to charge. If I place the tablet on the Touchstone, a clock face appears whilst it is charging - is there anyway that I can do this using a bog standard charging cable?
Many thanks.
It charges on the touchstone, but not via direct cable to the HP barrel charger?
Are you using the same barrel charger? or two different ones?
_Dan