Xperia Z1 (6903) - Xperia Z1 Q&A, Help & Troubleshooting

Hi, when I was updating my Z1, my laptop shut down. Now, when I want turn on phone, I see only logo of Sony, and this: The software update failed make sure that your phone is connected.
Somebody can help me? I have in phone a lot of contacts and photos...
Thank you and sorry for my english

jakubxbilek said:
Hi, when I was updating my Z1, my laptop shut down. Now, when I want turn on phone, I see only logo of Sony, and this: The software update failed make sure that your phone is connected.
Somebody can help me? I have in phone a lot of contacts and photos...
Thank you and sorry for my english
Click to expand...
Click to collapse
Could you try to repeat the update process?

aquaboy11 said:
Could you try to repeat the update process?
Click to expand...
Click to collapse
No, i can´t acces into phone menu....nothing...

jakubxbilek said:
No, i can´t acces into phone menu....nothing...
Click to expand...
Click to collapse
Fully switch off your phone and make sure it is disconnected from your PC. Start PC Companion, select Support zone, click update my phone/tablet, click repair my phone/tablet and follow the on-screen instructions. When it tells you to connect your phone, make sure it is still turned off. Connect the USB cable while holding vol-. This should boot your phone into flashmode and start the repair process.
Source

aquaboy11 said:
Could you try to repeat the update process?
Click to expand...
Click to collapse
aquaboy11 said:
Fully switch off your phone and make sure it is disconnected from your PC. Start PC Companion, select Support zone, click update my phone/tablet, click repair my phone/tablet and follow the on-screen instructions. When it tells you to connect your phone, make sure it is still turned off. Connect the USB cable while holding vol-. This should boot your phone into flashmode and start the repair process.
Source
Click to expand...
Click to collapse
Thank you!!§ It works...
But now I have problem with display...The brightness is behaving strangely...I cant change brightness manually. I have turn off intelligent display, but brightness of display is all the time same...and display is flickers...It can be broken LCD?

jakubxbilek said:
Thank you!!§ It works...
But now I have problem with display...The brightness is behaving strangely...I cant change brightness manually. I have turn off intelligent display, but brightness of display is all the time same...and display is flickers...It can be broken LCD?
Click to expand...
Click to collapse
If the screen worked fine before you updated, and the phone didn't take any physical damage, I think the LCD is fine. My mom's tablet had the same issue. Wiping the cache partition in recovery, and clearing the cache of all apps (including system apps) seems to have fixed the problem. Not sure if there is an easy way to clear the cache of every app without root and recovery though.

aquaboy11 said:
If the screen worked fine before you updated, and the phone didn't take any physical damage, I think the LCD is fine. My mom's tablet had the same issue. Wiping the cache partition in recovery, and clearing the cache of all apps (including system apps) seems to have fixed the problem. Not sure if there is an easy way to clear the cache of every app without root and recovery though.
Click to expand...
Click to collapse
How I can do wiping the cache and other when I dont have some custom recovery? For example TWRP...

jakubxbilek said:
How I can do wiping the cache and other when I dont have some custom recovery? For example TWRP...
Click to expand...
Click to collapse
You could download Cache Cleaner from the playstore to wipe your cache without root. And if you would like to install XZDualRecovery without unlocking your bootloader you could check out my post here.

aquaboy11 said:
You could download Cache Cleaner from the playstore to wipe your cache without root. And if you would like to install XZDualRecovery without unlocking your bootloader you could check out my post here.
Click to expand...
Click to collapse
I cant login into my ****in google acc, because I cant touch "A" and "0".....I think LCD is broken....but I dont know why??

Related

[Q] Problem/Download Mode/Power off/Unknown upload mode/

Hello.
I have a diffrent kind of problem.
So yesterday i saw on my phone that headphones icon is on but it's not connected of course so i thought maybe wrong flash or something with system.
Of course i have bad luck to devices such as i8190 and when i tried to go in download mode it wouldnt start.
I searched forum and other site and tried to force download mode by adb tool and after that flash it by odin.
Of course my bad luck kicked me in the a.. and adb tool can't boot it too.
So i tought (maybe) other combinations of button then i pressed volume up and power and then i see a text POWER OFF, UNKNOWN UPLOAD MODE.
Desperate by such thing i tried to do something with cwm of course my rooted phone lose (by some mean) superuser not just program but whole root when to trash with cwm and other things...Tried to factory reset by phone aplication didnt do anything by deleting all ringtones and options i had.
I have android 4.1.1 no root, no means to go in to recovery mode no means to get in download mode.
Dont know what to do to returned it to good state.
So my question is please. Can somebody help me ?
Greetings from Poland!
red733 said:
Hello.
I have a diffrent kind of problem.
.....
So my question is please. Can somebody help me ?
Greetings from Poland!
Click to expand...
Click to collapse
Are you using vol-/home/power at the same time to get to download?
tys0n said:
Are you using vol-/home/power at the same time to get to download?
Click to expand...
Click to collapse
Yep i tried that but i manage to force it by adb by some miracle dunno what happen earlier but now after flash i have problem with that headphone icon. I flashed it with 4.1.2 maybe wipe and param files do something.
When i boot phone it's alright but after fully started its shows its connected to headphones while headphones are off and ringtones play alright but media is playing in headphones mode so i will try to degrade it with firmware 4.1.1 xxall maybe something will change or happily it will be okay.
If someone have idea for this please reply
Strange bug I've never heard of before. Have you tried to make a factory reset from recovery?
Also do a factory reset before you downgrade from 4.1.2 to 4.1.1, otherwise you'll end up with bootloop or force closing apps.
tys0n said:
Strange bug I've never heard of before. Have you tried to make a factory reset from recovery?
Also do a factory reset before you downgrade from 4.1.2 to 4.1.1, otherwise you'll end up with bootloop or force closing apps.
Click to expand...
Click to collapse
I tried that in first attempt and nothing happen.
Okay i try to wipe then flash it to 4.1.1
I write right away what happen.
Yep i did wipe and flash it and bootloop what now ? ;/
red733 said:
I tried that in first attempt and nothing happen.
Okay i try to wipe then flash it to 4.1.1
I write right away what happen.
Yep i did wipe and flash it and bootloop what now ? ;/
Click to expand...
Click to collapse
Okay its ok now but problem with headphones still happens. :/ dunno what to do ;/
red733 said:
Okay its ok now but problem with headphones still happens. :/ dunno what to do ;/
Click to expand...
Click to collapse
Hmm..very strange.
tys0n said:
Hmm..very strange.
Click to expand...
Click to collapse
Yep hmmmm flash and wipe didnt do anything maybe in system maybe some app is glitching it dunno how to check that ;/
red733 said:
Yep hmmmm flash and wipe didnt do anything maybe in system maybe some app is glitching it dunno how to check that ;/
Click to expand...
Click to collapse
I manage to correct problem by this app https://play.google.com/store/apps/details?id=com.dwalkes.android.toggleheadset2&hl=pl
For all problems with headphones, earphones always connected this app may help.
Thank You for all help.
Ive got this problem with BenzRom. unknown upload..what i did was flash the three combo combination tar by benz and wiped dalvik and boom my phone is up again.
Sent From The Palm Of My Hand!!
I Flashed This Rom AOKP - 3g - 2013-07-24 ... But Really I Have Problem I Can't Use Packet Data ...I Cant Throw To Internet Via Sim Card Only Wifi ??? Why Wifi Only ??

[Q] factory reset flashtool

Hello,
I've sort of asked this question before but when I flash stock rom with wipe data checked on flashtool does it wipe data before the phone is switched on or does it have to be turned on to activate the reset because the phone wont turn on because I broke the battery connector lol if you know how the wipe data works please explain, I dont want the phone to turn on, I know it can't I just wanted to know if flashtool wipes data before the phone gets switched on lol sorry bit of a weird question
mattyxkrist said:
Hello,
I've sort of asked this question before but when I flash stock rom with wipe data checked on flashtool does it wipe data before the phone is switched on or does it have to be turned on to activate the reset because the phone wont turn on because I broke the battery connector lol if you know how the wipe data works please explain, I dont want the phone to turn on, I know it can't I just wanted to know if flashtool wipes data before the phone gets switched on lol sorry bit of a weird question
Click to expand...
Click to collapse
I think yes. I think you see it in flashtool while/after flashing(the "log" when you are flashing).
mattyxkrist said:
Hello,
I've sort of asked this question before but when I flash stock rom with wipe data checked on flashtool does it wipe data before the phone is switched on or does it have to be turned on to activate the reset because the phone wont turn on because I broke the battery connector lol if you know how the wipe data works please explain, I dont want the phone to turn on, I know it can't I just wanted to know if flashtool wipes data before the phone gets switched on lol sorry bit of a weird question
Click to expand...
Click to collapse
gripfly said:
I think yes. I think you see it in flashtool while/after flashing(the "log" when you are flashing).
Click to expand...
Click to collapse
Ofc yes.
Otherwise phone couldn't even boot in most cases if coming from cm.
Sent from my Xperia™Z»4.3Leak«
Thank you very much!
Sent from my C6603 using xda app-developers app

[Q] xperia sp stuck on boot animation after restarting again and again

hi i am new here. yesterday i flashed existenz 2.0 rom on sony xperia sp. All went right. then i flashed boot animation on it . then i restarted but it stucks on animation. now nothing is happening i have tried charging it but i think it doesnot do charging in switch off mode, so it starts again and does some charging then on animation it stucks and charging stopps and then after some time it drains the battery and gets swiched off. Then again this process continues. it is not going into recovery mode, flash mode , fastboot mode.
so if you can help me in this situation. pleeassssse
Sounds like a pretty bad bootloop does your PC recognise anything when you connect it? You need to go back to stock or at least to a working ROM. The long and short of it is to fix it you are going to need adb, recovery (if you have a nandroid backup) or flash mode. If you can't get any of them I think its bricked
Sent from my C5303 using xda app-developers app
i had similair problem to this no fastboot because of rebooting problem i had to take back off phone press and hold hard reset button with a pen and connect usb while pressing up all at the same bloody time not that easy but it did go to fastboot after a few attempts (might not work first time keep trying took me about 5 attemps)good luck
Are your Xperia Bootloader is unlocked? To install the custom ROM, you need to unlock the bootloader.
http://forum.xda-developers.com/showthread.php?t=2354721
pc is not recognising..
Captain Sweatpants said:
Sounds like a pretty bad bootloop does your PC recognise anything when you connect it? You need to go back to stock or at least to a working ROM. The long and short of it is to fix it you are going to need adb, recovery (if you have a nandroid backup) or flash mode. If you can't get any of them I think its bricked
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
my pc starts to recognise but then it gets switched off.
my fastbooot not connecting.
ireaper4592 said:
i had similair problem to this no fastboot because of rebooting problem i had to take back off phone press and hold hard reset button with a pen and connect usb while pressing up all at the same bloody time not that easy but it did go to fastboot after a few attempts (might not work first time keep trying took me about 5 attemps)good luck
Click to expand...
Click to collapse
for connecting to fastboot mode my phone should be charged about 20% but the problem is its not charging.
Rupant said:
for connecting to fastboot mode my phone should be charged about 20% but the problem is its not charging.
Click to expand...
Click to collapse
Any idea how much charge is in the phone? I think you will have to keep trying to get into fastboot or recovery try power and then vol up/down or camera depending on what your recovery is I can send you a full nandroid backup of stock if you need one. You need to break into the boot cycle get into recovery (i am assuming you have installed a recovery on this device) timing will probably have a lot to do with it.
Programming is a race between engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
make sure to use the stock sony usb cable as i think flashmode doesnt work well with other usb cables. also try the other usb ports on your computer. technically,you should still be able to enter flashmode and recovery.
no idea about charge?
Captain Sweatpants said:
Any idea how much charge is in the phone? I think you will have to keep trying to get into fastboot or recovery try power and then vol up/down or camera depending on what your recovery is I can send you a full nandroid backup of stock if you need one. You need to break into the boot cycle get into recovery (i am assuming you have installed a recovery on this device) timing will probably have a lot to do with it.
Programming is a race between engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Click to expand...
Click to collapse
no idea abouut charge. its has connected in fastboot mode but for very few secs till the charge is there.recovry is not working which is the main problem.
original cable
XPERIAAplooper said:
make sure to use the stock sony usb cable as i think flashmode doesnt work well with other usb cables. also try the other usb ports on your computer. technically,you should still be able to enter flashmode and recovery.
Click to expand...
Click to collapse
i am using the same usb cable that came with the phone.
Smankusors said:
Are your Xperia Bootloader is unlocked? To install the custom ROM, you need to unlock the bootloader.
http://forum.xda-developers.com/showthread.php?t=2354721
Click to expand...
Click to collapse
did you read my message?
locked bootloader
Smankusors said:
did you read my message?
Click to expand...
Click to collapse
rom which i installed can be also on locked bootloader.:good:
Rupant said:
rom which i installed can be also on locked bootloader.:good:
Click to expand...
Click to collapse
how about the latest version of eXistenZ?
You are flashing the 2.0 but the latest version is eXistenZ Ultra 2.1.5
http://forum.xda-developers.com/showthread.php?t=2478019
2.1.5 is ota update
Smankusors said:
how about the latest version of eXistenZ?
You are flashing the 2.0 but the latest version is eXistenZ Ultra 2.1.5
http://forum.xda-developers.com/showthread.php?t=2478019
Click to expand...
Click to collapse
2.1.5 is a ota update which i had updated to.
Rupant said:
2.1.5 is a ota update which i had updated to.
Click to expand...
Click to collapse
how about clearing data, dalvik, cache?
No need to worry I had given my mobile to service center now it's up and running. Thanks everyone for their suggestions.
Sent from my C5302 using XDA Premium 4 mobile app
mine too same problem
Rupant said:
No need to worry I had given my mobile to service center now it's up and running. Thanks everyone for their suggestions.
Sent from my C5302 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
dude wat to do....?? how much it costs in the service centre.....??
xperia277 said:
dude wat to do....?? how much it costs in the service centre.....??
Click to expand...
Click to collapse
what is the problem u are facing? give details
Rupant said:
what is the problem u are facing? give details
Click to expand...
Click to collapse
my xperia sp 5302 rooted wasnt starting, thank god for this awesome forum i got the solution.
Actually my phone was in a bad bootloop, so what i did was repaired the software using sony pc companion...thanks anyways dude

[SOLVED] I'm possibly bricked.

Okay, so, I know it's possible to fix this, it has to be. And let me explain why I can conclude this.
1.) I can access Philz recovery but ONLY when forcing the phone to hard reset via buttons.
2.) The touchscreen works in the recovery when resetting but doesn't go to the main menu or anything to restore a backup.
3.) The phone will recognize adb commands from the computer, but since the touches don't work when booted I cannot select the "allow this computer" prompt.
4.) The phone boots into the CM11 ROM and the buttons work (I can change volume, take screenshots, and access power menu.)
So, I'll explain what happened. I tested a boot.img for Quarx and flashed it. I didn't reboot my phone, just let it stay on. It worked and everything, but a little bit after church it rebooted on me and showed the CM setup menu. I was like, "What? Okay..." So I was going trying to make it work, but I realized the touchscreen wouldn't respond to my touches. I locked/unlocked the screen, rebooted, all that good stuff, and none of it worked. So, here's the damage done.
1.) I can't touch anything on the screen. It won't respond to touches.
2.) I cannot access recovery, only hard reset.
3.) I cannot approve adb commands because I need to hit "allow" on the screen. (The prompt does come up though)
So, I have a phone that boots, responds to hardware actions, and can recognize adb commands, but won't accept them unless I say "allow." I can access recovery but only when factory resetting through holding Power + VOL DOWN when booting. The touchscreen works in recovery, but it won't do any actions (back, home, etc.) because it's resetting. After resetting it boots instantly, and voila, my problem remains.
So in short, I need a way to bypass that "authentication" for adb, because in order for fastboot to recognize my device I need to run adb commands to set it up (since that's gone too now). That, or, I need to find a way to access Philz recovery without having to use the touchscreen. It's so frustrating because the one button I need to press is literally right in front of my face, on my screen, but it won't respond to my input.
Does anybody here have any suggestions? I haven't been able to flash a KDZ successfully, I don't know why. It never works for me on this phone. I was a pro at it on the L9. School begins in a week and I need to have a phone that works, for transportation and such. I'm not really at a point to buy a phone right now either since I'm focusing on buying my first car (yay I guess).
If anyone can help I'd really appreciate it. In fact, I'm even willing to donate money to whomever can point me in the right direction.
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow this guide and reflash KDZ
Ilxaot said:
Okay, so, I know it's possible to fix this, it has to be. And let me explain why I can conclude this.
1.) I can access Philz recovery but ONLY when forcing the phone to hard reset via buttons.
2.) The touchscreen works in the recovery when resetting but doesn't go to the main menu or anything to restore a backup.
3.) The phone will recognize adb commands from the computer, but since the touches don't work when booted I cannot select the "allow this computer" prompt.
4.) The phone boots into the CM11 ROM and the buttons work (I can change volume, take screenshots, and access power menu.)
So, I'll explain what happened. I tested a boot.img for Quarx and flashed it. I didn't reboot my phone, just let it stay on. It worked and everything, but a little bit after church it rebooted on me and showed the CM setup menu. I was like, "What? Okay..." So I was going trying to make it work, but I realized the touchscreen wouldn't respond to my touches. I locked/unlocked the screen, rebooted, all that good stuff, and none of it worked. So, here's the damage done.
1.) I can't touch anything on the screen. It won't respond to touches.
2.) I cannot access recovery, only hard reset.
3.) I cannot approve adb commands because I need to hit "allow" on the screen. (The prompt does come up though)
So, I have a phone that boots, responds to hardware actions, and can recognize adb commands, but won't accept them unless I say "allow." I can access recovery but only when factory resetting through holding Power + VOL DOWN when booting. The touchscreen works in recovery, but it won't do any actions (back, home, etc.) because it's resetting. After resetting it boots instantly, and voila, my problem remains.
So in short, I need a way to bypass that "authentication" for adb, because in order for fastboot to recognize my device I need to run adb commands to set it up (since that's gone too now). That, or, I need to find a way to access Philz recovery without having to use the touchscreen. It's so frustrating because the one button I need to press is literally right in front of my face, on my screen, but it won't respond to my input.
Does anybody here have any suggestions? I haven't been able to flash a KDZ successfully, I don't know why. It never works for me on this phone. I was a pro at it on the L9. School begins in a week and I need to have a phone that works, for transportation and such. I'm not really at a point to buy a phone right now either since I'm focusing on buying my first car (yay I guess).
If anyone can help I'd really appreciate it. In fact, I'm even willing to donate money to whomever can point me in the right direction.
Click to expand...
Click to collapse
I hate to say it but Factory Reset appears to be your only option for a fix.
Maybe this is a long shot but check out this thread
shinobisoft said:
I hate to say it but Factory Reset appears to be your only option for a fix.
Click to expand...
Click to collapse
Reset doesn't fix it because the boot.img is still the messed up one.
shinobisoft said:
Maybe this is a long shot but check out this thread
Click to expand...
Click to collapse
I cannot enable USB debugging to use that since the screen doesn't work and it reset itself.
gdjindal said:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow this guide and reflash KDZ
Click to expand...
Click to collapse
I've tried that but it doesn't work for me. I need someone that can do it for me or something, because the KDZs never flash
@Ilxaot
are able to use philz??? fully...means is touch working on philz???
if yes then
you can put aroma file manager there...and in root of it in default.prop
change the lines
ro.adb.secure=1
ro.secure=1
to
ro.adb.secure=0
ro.secure=0
and reboot
now you have adb access without any confirmation required....
this is possible only if philz is working...
best luck...
and remove every possible LG driver from your pc
then reboot
connect to the internet
dont install drivers manually
let windows find the drivers if it doesnt find one.
then just reboot
after rebooting install drivers manually.
this works form me everytime.
k2wl said:
@Ilxaot
are able to use philz??? fully...means is touch working on philz???
if yes then
you can put aroma file manager there...and in root of it in default.prop
change the lines
ro.adb.secure=1
ro.secure=1
to
ro.adb.secure=0
ro.secure=0
and reboot
now you have adb access without any confirmation required....
this is possible only if philz is working...
best luck...
and remove every possible LG driver from your pc
then reboot
connect to the internet
dont install drivers manually
let windows find the drivers if it doesnt find one.
then just reboot
after rebooting install drivers manually.
this works form me everytime.
Click to expand...
Click to collapse
The only way I can boot into Philz is when it's factory resetting. When it's resetting, it shows the recovery and everything, but it's just resetting. There are no options to flash anything and such. It just resets and reboots.
EDIT - If I could get a KDZ to flash, I'd be set. When I connect my phone in laf mode (s/w mode) my computer doesn't recognize it. It says it's an unknown USB device, and shows a warning symbol next to it in the device manager. If I could get that fixed, I might be able to flash!
The recovery you use was not ok
Its gave me same problem when i try it,thank God i can enter download mode to flash KDZ and back to TWRP.
But what that is amazing me about your is that its cant do what other D415 does why? did your own D415 is special.
Also another thing is USB debugging,If you using CM11 by Quartz it was enable by default in that rom
4peace1 said:
The recovery you use was not ok
Its gave me same problem when i try it,thank God i can enter download mode to flash KDZ and back to TWRP.
But what that is amazing me about your is that its cant do what other D415 does why? did your own D415 is special.
Also another thing is USB debugging,If you using CM11 by Quartz it was enable by default in that rom
Click to expand...
Click to collapse
Yes but I still need to accept the prompt asking if I want to allow the computer to access the phone, which I cannot do because the screen does not respond.
How did you manage to flash the KDZ? I know it will be fixed if I can flash it, but I'm not having any luck flashing it! It keeps saying that the device is unknown, even though I've installed and uninstalled the drivers countless times.
Ilxaot said:
Yes but I still need to accept the prompt asking if I want to allow the computer to access the phone, which I cannot do because the screen does not respond.
How did you manage to flash the KDZ? I know it will be fixed if I can flash it, but I'm not having any luck flashing it! It keeps saying that the device is unknown, even though I've installed and uninstalled the drivers countless times.
Click to expand...
Click to collapse
I used this file here http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
I entered download mode by remove my battery,unplug cable,
Then insert the battery back and press volume up key(hold it ),then insert the usb cable
after seen download headline then press power key it will take you to firmware update
4peace1 said:
I used this file here http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
I entered download mode by remove my battery,unplug cable,
Then insert the battery back and press volume up key(hold it ),then insert the usb cable
after seen download headline then press power key it will take you to firmware update
Click to expand...
Click to collapse
I tried that guide last night. The LG tool just has a bunch of question marks instead of text, is that normal?
Ilxaot said:
I tried that guide last night. The LG tool just has a bunch of question marks instead of text, is that normal?
Click to expand...
Click to collapse
yes
4peace1 said:
yes
Click to expand...
Click to collapse
Okay, I'll keep trying. When you booted into download mode, did your computer say the USB device was unknown?
Ilxaot said:
Okay, I'll keep trying. When you booted into download mode, did your computer say the USB device was unknown?
Click to expand...
Click to collapse
nope may you need to change the cable or try another port
4peace1 said:
nope may you need to change the cable or try another port
Click to expand...
Click to collapse
Can you give me the link to the kdz you used? I feel that's the problem. It gets stuck at 2%, and another user said he changed KDZs and it worked fine. I got my computer to recognize it, now I just need it to flash it lol.. It's really depressing how something as incredibly stupid as a KDZ flash is holding me back, and nobody's suggestions seem to be working. About to just give up and not even care about mobiles anymore >.<
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW015106432109876543213/D41010c_00.kdz
this is a kdz for d410 indian variant.
i dont know your model no.
k2wl said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW015106432109876543213/D41010c_00.kdz
this is a kdz for d410 indian variant.
i dont know your model no.
Click to expand...
Click to collapse
I actually just fixed it as you responded! Thanks mate!
you are welcome...so what about a nice unbricking guide from your experiences????
i think others will contribute so that we can make a good unbricking thread for l90...
k2wl said:
you are welcome...so what about a nice unbriking guide from your experiences????
i think others will contribute so that we can make a good unbricking thread for l90...
Click to expand...
Click to collapse
The guide that I followed was the one about flashing KDZs in thy general section. The problem I had was that my KDZ that I downloaded was corrupt somehow, so I had to find a working one!!

Stuck in weird limbo between normal and ultra stamina mode - please help!

Hey everyone,
So this started after I used Ultra Stamina Mode to conserve power, but after I turned it off my phone went into some weird state that looks like ultra stamina mode but I can use internet/wifi, 10% of my apps are (facebook, whatsapp etc) are usable. Its very frustrating...not sure what to do, i've tried restarting and all the obvious stuff. I used USM before (Nov last year) and it worked fine, so I have no idea why it would play up like it has.
If anyone has had this and/or knows how to fix it please enlighten me.
Thank you!
lurtz113 said:
Hey everyone,
So this started after I used Ultra Stamina Mode to conserve power, but after I turned it off my phone went into some weird state that looks like ultra stamina mode but I can use internet/wifi, 10% of my apps are (facebook, whatsapp etc) are usable. Its very frustrating...not sure what to do, i've tried restarting and all the obvious stuff. I used USM before (Nov last year) and it worked fine, so I have no idea why it would play up like it has.
If anyone has had this and/or knows how to fix it please enlighten me.
Thank you!
Click to expand...
Click to collapse
Umm I've never had this before.... Is your bootloader locked, or unlocked? Try to install a recovery and wipe your cache and dalvik cache (even if your bootloader is locked you can install a recovery). If this doesn't work you could try to reflash your firmware, though I hope this won't be necessary.
St.Jimmy90 said:
Umm I've never had this before.... Is your bootloader locked, or unlocked? Try to install a recovery and wipe your cache and dalvik cache (even if your bootloader is locked you can install a recovery). If this doesn't work you could try to reflash your firmware, though I hope this won't be necessary.
Click to expand...
Click to collapse
Bootloader is locked, phone isn't rooted. I am not very android savvy so I apologize if I don't get something...in this case what is a 'recovery' and how does one install it? How do i wipe cache and what is dalvik cache?
And I guess reflashing firmware is a factory reset i imagine? Can I do any of this without losing my data and app data?
Also I just dialed *#*#7378423#*#* and noticed I can reset customization under 'customization settings'. Will this help? It won't wipe any of my data will it?
(I tried booting phone in safe mode, which made no difference)
lurtz113 said:
Bootloader is locked, phone isn't rooted. I am not very android savvy so I apologize if I don't get something...in this case what is a 'recovery' and how does one install it? How do i wipe cache and what is dalvik cache?
And I guess reflashing firmware is a factory reset i imagine? Can I do any of this without losing my data and app data?
Also I just dialed *#*#7378423#*#* and noticed I can reset customization under 'customization settings'. Will this help? It won't wipe any of my data will it?
(I tried booting phone in safe mode, which made no difference)
Click to expand...
Click to collapse
Oh don't worry, your phone needs to be rooted to get a working recovery. If you don't feel familiar with it you don't need to do it.
Yeah, reflashing your firmware basically means a factory reset. You can do it with Sony PC Companion (or it's succesor). This does mean that you will loose your apps and data, so you should back it up before doing so.
I highly doubt changig your customization will do anything.
St.Jimmy90 said:
Oh don't worry, your phone needs to be rooted to get a working recovery. If you don't feel familiar with it you don't need to do it.
Yeah, reflashing your firmware basically means a factory reset. You can do it with Sony PC Companion (or it's succesor). This does mean that you will loose your apps and data, so you should back it up before doing so.
I highly doubt changig your customization will do anything.
Click to expand...
Click to collapse
Yeah that's what I thought unfortunately... only problem now is how do I back up all my data. I can't do it like I was able to before because the Backup and Restore app isn't available to me, and the Sony PC Companion doesn't back up app data. Is there a backup method I can use from a pc?
lurtz113 said:
Yeah that's what I thought unfortunately... only problem now is how do I back up all my data. I can't do it like I was able to before because the Backup and Restore app isn't available to me, and the Sony PC Companion doesn't back up app data. Is there a backup method I can use from a pc?
Click to expand...
Click to collapse
You can use your pc's file manager and copy all your data from the phone.
St.Jimmy90 said:
You can use your pc's file manager and copy all your data from the phone.
Click to expand...
Click to collapse
I read that apps and their data are mostly stored in the data Partition which can't be accessed by computers...
lurtz113 said:
I read that apps and their data are mostly stored in the data Partition which can't be accessed by computers...
Click to expand...
Click to collapse
Most of the app data is in a folder "android" in the data partition. Also copy your WhatsApp folder if you like to keep that data. The download, dcim etc folders are important, too
St.Jimmy90 said:
Most of the app data is in a folder "android" in the data partition. Also copy your WhatsApp folder if you like to keep that data. The download, dcim etc folders are important, too
Click to expand...
Click to collapse
I am going to try to make a few backups, just in case. I've transferred everything like you suggested and I rooted the phone. How can I make a recovery for it without downloading anything from the Google Play Store (as I cant access it on the phone) and are there other backup methods I can use?
lurtz113 said:
I am going to try to make a few backups, just in case. I've transferred everything like you suggested and I rooted the phone. How can I make a recovery for it without downloading anything from the Google Play Store (as I cant access it on the phone) and are there other backup methods I can use?
Click to expand...
Click to collapse
Well done! Here are the important threads for the recovery. First the q&a, then the development thread. Please read the q&a before trying to flash the recovery. You have to download the one for your c660x. (EG c6603 if it's the international version. You can find it on the bottom side of the phone)
https://forum.xda-developers.com/xperia-z/general/z-xzdualrecovery-qa-t2477769
https://forum.xda-developers.com/showthread.php?t=2261606
St.Jimmy90 said:
Well done! Here are the important threads for the recovery. First the q&a, then the development thread. Please read the q&a before trying to flash the recovery. You have to download the one for your c660x. (EG c6603 if it's the international version. You can find it on the bottom side of the phone)
https://forum.xda-developers.com/xperia-z/general/z-xzdualrecovery-qa-t2477769
https://forum.xda-developers.com/showthread.php?t=2261606
Click to expand...
Click to collapse
Alright, so i've installed XZDualRecovery and ran the first option (SuperSU) and made a backup on my SD card. Is this the recovery step? Did I do it right lol? I feel rather lost as there isn't a step-by-step guide to this...
And for later, how do I wipe the cache and dalvik cache? (Again apologies for my amateurishness)
Also I did root the phone with Kingo Root...hopefully it won't be an issue
lurtz113 said:
Alright, so i've installed XZDualRecovery and ran the first option (SuperSU) and made a backup on my SD card. Is this the recovery step? Did I do it right lol? I feel rather lost as there isn't a step-by-step guide to this...
And for later, how do I wipe the cache and dalvik cache? (Again apologies for my amateurishness)
Also I did root the phone with Kingo Root...hopefully it won't be an issue
Click to expand...
Click to collapse
Open twrp recovery, go to wipe and then advanced wipe. Uncheck anything there except cache and dalvik
St.Jimmy90 said:
Open twrp recovery, go to wipe and then advanced wipe. Uncheck anything there except cache and dalvik
Click to expand...
Click to collapse
Well I ticked cache and delvik cache and wiped. Now when I try to turn on the phone nothing happens, it vibrates when I try to turn it on but the screen is black
lurtz113 said:
Well I ticked cache and delvik cache and wiped. Now when I try to turn on the phone nothing happens, it vibrates when I try to turn it on but the screen is black
Click to expand...
Click to collapse
Umm, that's unusual and weird...., it never happened to me.... Does the LED still light up? If so you could try to get into the recovery by holding volume up. If not I fear you have to use Sony PC Companion and select software repair.
St.Jimmy90 said:
Umm, that's unusual and weird...., it never happened to me.... Does the LED still light up? If so you could try to get into the recovery by holding volume up. If not I fear you have to use Sony PC Companion and select software repair.
Click to expand...
Click to collapse
The LED is mostly dead. It flashes red and green very quickly just once when I plug it into my PC via USB, and it slowly flashes red when its charging in the wall socket. I tried a whole bunch of power + vol up or vol down buttons to get a response but the screen remains unresponsive. As for using Sony PC Companion I cannot, in this state the phone isn't being read or recognised by the pc, its like nothing is plugged in...
lurtz113 said:
The LED is mostly dead. It flashes red and green very quickly just once when I plug it into my PC via USB, and it slowly flashes red when its charging in the wall socket. I tried a whole bunch of power + vol up or vol down buttons to get a response but the screen remains unresponsive. As for using Sony PC Companion I cannot, in this state the phone isn't being read or recognised by the pc, its like nothing is plugged in...
Click to expand...
Click to collapse
Is PC companion properly installed? Power off the phone and select software repair in pc companion, then follow instructions. Don't connect your phone to the ocean unless pc companion tells you to. It will guide you through the process
St.Jimmy90 said:
Is PC companion properly installed? Power off the phone and select software repair in pc companion, then follow instructions. Don't connect your phone to the ocean unless pc companion tells you to. It will guide you through the process
Click to expand...
Click to collapse
Yeah its installed properly. I have no idea if the phone is on or off because the screen doesnt turn on for anything. I found a guide about how to repair a phone with the Sony PC Companion and it said that the battery should be at least80% so I am charging it now just in case
St.Jimmy90 said:
Is PC companion properly installed? Power off the phone and select software repair in pc companion, then follow instructions. Don't connect your phone to the ocean unless pc companion tells you to. It will guide you through the process
Click to expand...
Click to collapse
Cheers man, that worked. Back to factory settings. Now I just have to get all the stuff I had back onto it lol.
Is the backup I made with TWRP good for this?
Or not, because the backup was made while I had that Ultra Stamina Mode glitch? Maybe I could delete a file in the backup which has those settings stored on it?
lurtz113 said:
Cheers man, that worked. Back to factory settings. Now I just have to get all the stuff I had back onto it lol.
Is the backup I made with TWRP good for this?
Or not, because the backup was made while I had that Ultra Stamina Mode glitch? Maybe I could delete a file in the backup which has those settings stored on it?
Click to expand...
Click to collapse
It's pretty much useless as your problems will be restored, too
St.Jimmy90 said:
It's pretty much useless as your problems will be restored, too
Click to expand...
Click to collapse
Decided to give it a try again...restored the backup, and tried wiping the cache and delvik again. The phone didn't brick this time but nothing changed either...

Categories

Resources