Related
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
try to flash with mfastboot the recovery from 4.4.2 the FIRMWARE U HAVE IT FIRST
MUST BE THE SAME VERSION THAT U HAVE FIRST THAT UR PHONE BRICKED
after u flash the recovery,reboot bootloader and try to flash all firmware
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> http://sbf.droid-developers.org/phone.php?device=0 ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As TUESONER said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
TUESONER said:
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
Click to expand...
Click to collapse
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
KidJoe said:
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
Click to expand...
Click to collapse
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
I don't know the differences in the ATT Rom vs America Movil... I know the ATT rom has a lot of bloat.
I don't think the ATT 4.4.2 SBF was leaked yet (it wasn't when i looked earlier)...
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
the only Movil 4.4.2 is this
http://sbf.droid-developers.org/download.php?device=0&file=835
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
TUESONER said:
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
Click to expand...
Click to collapse
kj2112 said:
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
danger2u said:
the only Movil 4.4.2 is this
xxx
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
Click to expand...
Click to collapse
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
TUESONER said:
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
Click to expand...
Click to collapse
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
danger2u said:
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
Click to expand...
Click to collapse
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
danger2u said:
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
Click to expand...
Click to collapse
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
he can pass the comand
mfastboot oem config carrier vzw
it works without this too
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
i will use this one, i erased the line of ''max download size''
TUESONER said:
i will use this one, i erased the line of ''max download size''
Click to expand...
Click to collapse
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
KidJoe said:
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
Click to expand...
Click to collapse
The ROM isn't the original that was running my phone, i got 4.2.2 out of the box, now i will indtsll thst ROM because is 4.4.2 & i will not brick or have problems, the fastboot that you attached doesn't work with the comands ''mfastboot'' i use just ''fastboot''?
i did it!
GUYS! THANK YOU A LOT! i did it, mi moto X is alive, thanks @KidJoe, @danger2u & @kj2112, you helped me without even knowing me.
I used the comands that @KidJoe gave me, but using just ''fastboot'' everything is working fine, even the 4G connection.
Thanks, really, really thanks... Now i feel i'm a real XDA member & i wish my post help people.
Simple question:
I have a UK **DUAL* SIM Moto G 2nd gen, XT1068, and I wish to flash it to an XT1064, US *SINGLE* SIM Moto G. How do I do this? Do I merely flash the US retail 4.4.4 onto it? I know this process could be carried out on the older 1st gen, to convert an XT1033 to an XT1032 (single SIM) - maybe I am impatient, but I want to try...
If you could advise me how to do this, please do let me know. What I am NOT after, is people asking me "why do you want to do this?" or telling me "Do you know the risks of X, Y or Z?" - I am an experienced engineer who's been using many platforms since the 1980s, I use Linux daily since 2003, and I know what I am doing - I know there are risks (with everything in tech, basically) and dissuasion is not needed, thanks folks
I also wanted to know how to do it :/
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
abhi0502 said:
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
Click to expand...
Click to collapse
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Click to expand...
Click to collapse
So, wait for the official release
glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
I guess you'd have to keep these backup on your PC, just in case, then you would follow the steps to go stock but with xt1064 files, once you flash it all, you'd start the system and check for update, if there is none, you'd download the zip and flash it by adb sideload. The backup is just for safety. My guess, and some kind obvious, is that your Sim won't work, then you'd have to flash the modem in order to see if at least sim 1 works.
Sent from my XT1068 using XDA Free mobile app
Edit: Yesterday I flashed xt1063 zip but I wasn't getting any update but it did worked. My guess is xt1064 might work
glossywhite said:
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
rodrigo07 said:
So, wait for the official release
Click to expand...
Click to collapse
Of?
Ah, you presume I am looking to install lollipop? I am looking to convert an XT1068 to an XT1064, I never mentioned lollipop.
abhi0502 said:
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
Click to expand...
Click to collapse
Thank you for your help. I really value it, God bless you
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
laureano97 said:
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
Click to expand...
Click to collapse
It doesn't matter - I've tried this twice tonight with fastboot errors, so I decided to err on the side of caution and restore stock UK XT1068 firmware, and wait... hehe
I could successfully convert XT1068 to XT1064 and installed Android Lollipop
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
No luck
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
Thank you for your reply....Tried just now still no signal...any other way?? i guess i need the kernel image to be flashed where can i get that..??
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
hello rodrigo07 i got the same error and tried the same procedure you passed reinstalled the modem from my original rom not got more success trying to work it more I think it will be better to wait original lollipop should not take out sorry for my bad english
Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin mfastboot.exe erase modemst1 mfastboot.exe erase modemst2 mfastboot.exe flash fsg fsg.mbn mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
Ok...Thank you...please be online i am gonna test it immediately and post the feedback...
humm so there is people here who has converted to US single sim and they are enjoying it right? without network problems, for example, in Europe?
abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Chetsan Manjunath said:
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Click to expand...
Click to collapse
Flash all command i have given
U need to check which firmware has single sim then try
Hi, can anyone tell me how to update the modem to the latest version?
I'm on pure edition 1095 unlocked, twrp, custom 511 rom. I've searched all over and cannot find a clear guide on how to do it.
Thank you in advance!
PainfulLover said:
Hi, can anyone tell me how to update the modem to the latest version?
I'm on pure edition 1095 unlocked, twrp, custom 511 rom. I've searched all over and cannot find a clear guide on how to do it.
Thank you in advance!
Click to expand...
Click to collapse
Download the full firmware of the 5.1 Pure edition then extract the files
NON-HLOS.bin and FSH.mbn the go to fast boot and type:
mfastboot erase modemst1 mfastboot erase modemst2 mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn mfastboot reboot
Done. You have the last modem of the 5.1 pure edition.
Now you've confused me because I found different code and steps on moto website and xda
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
PainfulLover said:
Now you've confused me because I found different code and steps on moto website and xda
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
Is the same just different order. The erase command don't erase the NON-HLOS.bin but the stats and configuration or the modem.
Flashing before of after the new modem over the old makes no difference unless you don't erase modemst1 and st2.
mfastboot is the "same" fast boot just a command special designed to Motorola devices.
I followed the instructions and got unknown baseband and blank imei. I restored the efs from backup and got the imei back, the baseband version is newer. I thought the efs restore would change it back to the original?
PainfulLover said:
I followed the instructions and got unknown baseband and blank imei. I restored the efs from backup and got the imei back, the baseband version is newer. I thought the efs restore would change it back to the original?
Click to expand...
Click to collapse
ok, maybe is because the 5.1.1 custom you are using is not compatible with the modem you are trying to flash. And it is "normal" if you lose signal and IMEI after, that happened to me when I flashed the 5.0 modem over a 4.4.4, the solution is simple, just flash back your original modem and your IMEI/baseband will be restored.
Here in Germany the latest patchlevel is august 2017.
BUILD: NPX26.122-68
Here ist the Factory Image for retail devices (reteu ist also flashable) --> THANK YOU "Rickk182440":
BUILD: NPXS26.122-68-1 - Patchlevel 09/2017
(File was removed on androidfilehost)
Update:
BUILD: NPXS26.122-68-2 - Patchlevel 10/2017
https://androidfilehost.com/?fid=673791459329059776
Update:
BUILD: NPXS26.122-68-4 - Patchlevel 11/2017
https://androidfilehost.com/?w=files&flid=227116
Great!!
Have you tried to root and/or install twrp?
No, my device ist not rooted and bootloader is closed. Fully stock.
Passerati said:
No, my device ist not rooted and bootloader is closed. Fully stock.
Click to expand...
Click to collapse
Thanx a lot! Downloaded!
I'm going to install TWRP+root+Xposed instead, I need them for my needs...
Could you post the exact flashing sequence you used and what flashing command executable?
Keep in touch, I think we are the only European with a Z2 here...
(Mine is a dual SIM -06 version from Germany too)
enetec said:
Thanx a lot! Downloaded!
I'm going to install TWRP+root+Xposed instead, I need them for my needs...
Could you post the exact flashing sequence you used and what flashing command executable?
Keep in touch, I think we are the only European with a Z2 here...
(Mine is a dual SIM -06 version from Germany too)
Click to expand...
Click to collapse
Here is the sequence, a little bit different because seamless updates functionality and two system partitions:
I flashed no gpt.bin!
*(fastboot flash bootloader bootloader.img) -> only when needed!
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash system_b system_b.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase ddr
fastboot reboot
I hope, this helps.
Passerati said:
Here is the sequence, a little bit different because seamless updates functionality and two system partitions:
I flashed no gpt.bin!
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash system_b system_b.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase ddr
fastboot reboot
I hope, this helps.
Click to expand...
Click to collapse
Thank you, it helps A LOT!
I agree about not flashing gpt...
I would have some doubt about bootloader too... did you see if it upgrades bootloader version?
(On old Griffin it was a problem...)
So, you used normal fastboot and not mfastboot as many hint to... interesting..!
enetec said:
Thank you, it helps A LOT!
I agree about not flashing gpt...
I would have some doubt about bootloader too... did you see if it upgrades bootloader version?
(On old Griffin it was a problem...)
So, you used normal fastboot and not mfastboot as many hint to... interesting..!
Click to expand...
Click to collapse
Sorry, I don´t noticed the version before...You can try without the bootloader.bin and start with HLOS.bin.
And YES, i used fastboot from actual plattform-tools and no mfastboot without errors.
either AFH is down or i just cant access the file. ------ works now
Should this also work for U.S.?
Edit: It does flash to the TMO U.S. version but no radio.
ac1dx said:
either AFH is down or i just cant access the file. ------ works now
Should this also work for U.S.?
Edit: It does flash to the TMO U.S. version but no radio.
Click to expand...
Click to collapse
What does software channel say under settings > about phone ?
themustached said:
What does software channel say under settings > about phone ?
Click to expand...
Click to collapse
I didnt check that however, i did have the correct APN's automatically loaded.
Right now im back on TMO software.
ac1dx said:
I didnt check that however, i did have the correct APN's automatically loaded.
Right now im back on TMO software.
Click to expand...
Click to collapse
Oh, okay. Well since you were able to go to that and flash back I'll try that.
themustached said:
Oh, okay. Well since you were able to go to that and flash back I'll try that.
Click to expand...
Click to collapse
I'd like to see it work because its nice having a true aosp feel. none of the tmo crap even if you remove oem.img from tmo, it doesnt feel right.
ac1dx said:
I'd like to see it work because its nice having a true aosp feel. none of the tmo crap even if you remove oem.img from tmo, it doesnt feel right.
Click to expand...
Click to collapse
Not exactly sure, but I wonder if you flash that and then take and flash the modem from tmo if it'll work. I'll try and let you know.
themustached said:
Not exactly sure, but I wonder if you flash that and then take and flash the modem from tmo if it'll work. I'll try and let you know.
Click to expand...
Click to collapse
I would imagine swapping out the NON_HLOS file would work....??
ac1dx said:
I would imagine swapping out the NON_HLOS file would work....??
Click to expand...
Click to collapse
possibly, not 100% for sure
themustached said:
possibly, not 100% for sure
Click to expand...
Click to collapse
It worked. Just replace that file
ac1dx said:
I would imagine swapping out the NON_HLOS file would work....??
Click to expand...
Click to collapse
Where did you get the TMO radio from? Did you just pull it from the stock flash.bat file?
Amd4life said:
Where did you get the TMO radio from? Did you just pull it from the stock flash.bat file?
Click to expand...
Click to collapse
yes
For those wondering, this will not work with sprint model unless you keep the oem.img from the sprint bat zip. Their provisioning apk is in the oem partition.
ac1dx said:
Should this also work for U.S.?
Edit: It does flash to the TMO U.S. version but no radio.
Click to expand...
Click to collapse
Have you tried to flash it without baseband?
Can someone report what baseband version is reported after update?
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment run.zip
Note: after locking bootloader, Don't forget to delete oem lock command and to add new command line for Sparshchunk 6
Success!
Works on my XT1806, I was able to lock the bootloader and flash firmware successfully.
Warranty is lost when you ask for unlock code!
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Click to expand...
Click to collapse
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
tbiwalkar said:
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
Click to expand...
Click to collapse
did they charge you.
yograjfire18 said:
did they charge you.
Click to expand...
Click to collapse
Yes. 1970 for fingerprint sensor replacement
tbiwalkar said:
Yes. 1970 for fingerprint sensor replacement
Click to expand...
Click to collapse
was it broken or something else,
yograjfire18 said:
was it broken or something else,
Click to expand...
Click to collapse
It was not working. Ideally it should have been covered in warranty. see my jobsheet View attachment 4395062
tbiwalkar said:
Yes. 1970 for fingerprint sensor replacement
Click to expand...
Click to collapse
1970 dollars?? With that money you could have bought the iphone X
M1810 said:
1970 dollars?? With that money you could have bought the iphone X
Click to expand...
Click to collapse
lol, it's Rs. 1970 bro not Dollars
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment 4394734
Click to expand...
Click to collapse
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
tbiwalkar said:
These days, At moto, the warranty is lost as soon as you ask for the device unlock code. I had my device back to stock and unrooted but still, in jobsheet at service center It showed out of warranty!
Click to expand...
Click to collapse
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
i think so too, bcs i have taken my moto e thrice because of being dead after unlocking and then updation , but my motherboard was replaced free of cost
yograjfire18 said:
Hello guys i found the link for stock rom with dec update to relock bootloader and to claim your warranty or to further update to latest updates
Link - https://androidfilehost.com/?fid=889964283620776326
Run this file to relock bootloader(worked for me)
:-View attachment 4394734
Click to expand...
Click to collapse
Ok..
I am total noob in this..!!
Can you explain.
I have downloaded the firmware file.
Now i didn't understand what you meant by RUN this file.!!
How to run?
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
Read his sentence. If you ask for unlock code you void warranty. It's no matter if you relock bootloader..
Wysłane z mojego Moto G (5S) Plus przy użyciu Tapatalka
QkiZMR said:
Read his sentence. If you ask for unlock code you void warranty. It's no matter if you relock bootloader..
Wysłane z mojego Moto G (5S) Plus przy użyciu Tapatalka
Click to expand...
Click to collapse
I asked for unlock key thrice but still remained under warranty
sharky_004 said:
Ok..
I am total noob in this..!!
Can you explain.
I have downloaded the firmware file.
Now i didn't understand what you meant by RUN this file.!!
How to run?
Click to expand...
Click to collapse
Run these commands to flash
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem reboot
fastboot oem reboot
yograjfire18 said:
Run these commands to flash
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot oem reboot
fastboot oem reboot
Click to expand...
Click to collapse
Thanks and
Sorry..but one last time.
I just have to run this commands ne bye one in a command prompt(in the extracted file folder of firmware).. am i right.?
sharky_004 said:
Thanks and
Sorry..but one last time.
I just have to run this commands ne bye one in a command prompt(in the extracted file folder of firmware).. am i right.?
Click to expand...
Click to collapse
just copy all at once and paste in cmd, flashing will start itself
CheckYourScreen said:
Nice find
I was thinking to make a separate thread with link of my whole firmware folder lol
Maybe you forgot to relock your bootloader before taking it to service center.. :silly:
Click to expand...
Click to collapse
I had relocked. I rather claimed that i never unlocked. They said that even if u request the BLUcode, warranty gets void.
Can I flash this on Rooted Moto G5s plus without loosing my Data? and re root again? How...?
virajkin said:
Can I flash this on Rooted Moto G5s plus without loosing my Data? and re root again? How...?
Click to expand...
Click to collapse
u can flash but it will be fomratted