I upgraded from cog2 to dok2 by flashing through odin just fine. then I flashed cfauto root through odin to retain root, worked great check through root checker and have root. now my problems come when i try to install twrp 3.0.0. I go into odin and flash, says successful and phone boot up just fine. but when I power phone off and try to launch twrp it just stays on the samsung galaxy note 4 powered by android screen, then shuts off the goes back to screen and does this it wont boot to twrp or boot back to normal start up. i have to go back to download mode and start the process all over again reflashing dok2 and root, Every time i try to install twrp same thing. Any ideas?
Latest twrp is like 2.8.7.6 or something not 3.0.0 make sure your flashing the correct twrp or philz recovery for your phone model.
Sent from my SM-N910F using Tapatalk
d12unk13astard said:
Latest twrp is like 2.8.7.6 or something not 3.0.0 make sure your flashing the correct twrp or philz recovery for your phone model.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Latest is 3.0.0.0-1. Op downloaded the version that was bugged. A new version came out that fixed the problem and is posted in the twrp 3.0.0.0 thread in the T-Mobile galaxy note 4 original development forum
Sent from my SM-N910T3 using Tapatalk
Related
I followed the steps in this guide to rooting my note 4, and got to step 5, but instead of a new custom recovery, I got "Installing system update -> No Command" and taken to the Android System Recovery screen.
I'm guessing it failed to flash, but I don't know how to fix it. Any ideas?
Tekap said:
I followed the steps in this guide to rooting my note 4, and got to step 5, but instead of a new custom recovery, I got "Installing system update -> No Command" and taken to the Android System Recovery screen.
I'm guessing it failed to flash, but I don't know how to fix it. Any ideas?
Click to expand...
Click to collapse
Check out post #35 in the thread you just referenced. Unchecking auto reboot then doing a battery pull seems to work for most.
ContractorDude said:
Check out post #35 in the thread you just referenced. Unchecking auto reboot then doing a battery pull seems to work for most.
Click to expand...
Click to collapse
For some reason it won't let me reflash in ODIN; it just says "All threads completed" with no download.
What version of TWRP are you trying to flash...and have you tried redownloading the file
ContractorDude said:
What version of TWRP are you trying to flash...and have you tried redownloading the file
Click to expand...
Click to collapse
2.8.7, from.the guide. I could try redownloading TWRP on my PC.
Tekap said:
2.8.7, from.the guide. I could try redownloading TWRP on my PC.
Click to expand...
Click to collapse
I ran into the same problem when I used that guide. That version of TWRP downloaded from the link wouldnt go through that odin version also from the link, after some bootloops and softbricks I downloaded latest version of twrp and odin and I was good to go.
Make sure you're using the latest version of odin and flash 3.0.0-1 instead
http://forum.xda-developers.com/showthread.php?p=65295770
Sent from my SM-N910T3 using Tapatalk
marioca said:
I ran into the same problem when I used that guide. That version of TWRP downloaded from the link wouldnt go through that odin version also from the link, after some bootloops and softbricks I downloaded latest version of twrp and odin and I was good to go.
Make sure you're using the latest version of odin and flash 3.0.0-1 instead
http://forum.xda-developers.com/showthread.php?p=65295770
Sent from my SM-N910T3 using Tapatalk
Click to expand...
Click to collapse
Finally got back around to trying to root my note 4 and trued this with TWRP 3.0.0-1 and ODIN 3.0.7 and it didn't work; but now there's ODIN 3.10 and it has a whole new UI so I have no idea how to use it and if I should use a new version of TWRP.
I'm having a bit of trouble trying to get a Custom recovery working in my phone. It's a SM-N920C International (UAE) version. If I flash Arther's Philz Recovery or TWRP both of them get stuck in "Samsung Galaxy Note 5, Recovery is not SEandroid enforcing". Usually it should start right away but even waiting like 10 minutes it doesn't start. I can use the phone normally and even flash stock roms with ODIN. It just doesn't want to start any Custom Recover I throw into it. Any thoughts?
galaxynote2 said:
I'm having a bit of trouble trying to get a Custom recovery working in my phone. It's a SM-N920C International (UAE) version. If I flash Arther's Philz Recovery or TWRP both of them get stuck in "Samsung Galaxy Note 5, Recovery is not SEandroid enforcing". Usually it should start right away but even waiting like 10 minutes it doesn't start. I can use the phone normally and even flash stock roms with ODIN. It just doesn't want to start any Custom Recover I throw into it. Any thoughts?
Click to expand...
Click to collapse
Provide info which OS are you on mm or ll?
Sent from my SM-G935F using Tapatalk
I have the same issue on a 920G with MM N920GUBU2BPC2_N920GUUB2BPC2_TPA installed TWRP 3.0.0.0 with ODIN but it will nto load just stuck on Note 5 logo if i reboot the phone starts normally.
aukhan said:
Provide info which OS are you on mm or ll?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Oops, I've forgot that! I'm on Marshmallow
Btw I realized that I was installing LP recoveries in MM so I flashed the lastest TWRP build and now it works. The new problem is that I managed to root it but even if SuperSU works I can't manage to modify system files and busybox doesn't work either. I've flashed Dr.Ketan experimental MM root over Supersu 2.67 (Systemless root) because it didn't worked.. so maybe there's a conflict there. I'll report tomorrow.
Fixed with a beta of twrp
Sent from my SM-N920G using Tapatalk
galaxynote2 said:
Oops, I've forgot that! I'm on Marshmallow
Btw I realized that I was installing LP recoveries in MM so I flashed the lastest TWRP build and now it works. The new problem is that I managed to root it but even if SuperSU works I can't manage to modify system files and busybox doesn't work either. I've flashed Dr.Ketan experimental MM root over Supersu 2.67 (Systemless root) because it didn't worked.. so maybe there's a conflict there. I'll report tomorrow.
Click to expand...
Click to collapse
Flash SuperSU Beta 2.68.
I was trying to install TWRP on my Note 5 using odin and everything worked perfectly. I even got the green "PASS" icon. But when it rebooted, I turned off the phone to boot into TWRP using Home+Power+Vol Up, and I got a installing system updates icon, then a fallen android bot with a yellow cross sign on top, and then it loaded into default android recovery, not TWRP. Any and all help is greatly appreciated. Thank you very much!!
This happend to me too. What you need to do is to flash a custom kernel for your device because you installed a custom recovery and what happens is that that the stock kernel stops working or it gets erased, but the fix for the problem is flashing a custom kernel.
Luis_0 said:
This happend to me too. What you need to do is to flash a custom kernel for your device because you installed a custom recovery and what happens is that that the stock kernel stops working or it gets erased, but the fix for the problem is flashing a custom kernel.
Click to expand...
Click to collapse
Thank you for the reply. I'm new to the rooting scene so by kernel you mean one of those auto root kernels you can flash through Odin?
Sent from my SM-N9208 using XDA-Developers mobile app
PatelCartel said:
Thank you for the reply. I'm new to the rooting scene so by kernel you mean one of those auto root kernels you can flash through Odin?
Sent from my SM-N9208 using XDA-Developers mobile app
Click to expand...
Click to collapse
What version of android you are running? Lollipop or Marshmallow?
by the way go to this link, it'll help you
http://forum.xda-developers.com/not...nel-nobleltehk-n9200-root-permissive-t3221777
Luis_0 said:
What version of android you are running? Lollipop or Marshmallow?
by the way go to this link, it'll help you
http://forum.xda-developers.com/not...nel-nobleltehk-n9200-root-permissive-t3221777
Click to expand...
Click to collapse
I'm running marshmallow 6.0.1
Sent from my SM-N9208 using XDA-Developers mobile app
PatelCartel said:
I'm running marshmallow 6.0.1
Sent from my SM-N9208 using XDA-Developers mobile app
Click to expand...
Click to collapse
well in that case flash this kernel with the custom recovery you installed
http://forum.xda-developers.com/note5/orig-development/kernel-n9208-ubertc-5-3-5-17-2016-t3381233
Luis_0 said:
well in that case flash this kernel with the custom recovery you installed
http://forum.xda-developers.com/note5/orig-development/kernel-n9208-ubertc-5-3-5-17-2016-t3381233
Click to expand...
Click to collapse
I can't flash it through custom recovery because I can't get to it
But before you flash the TWRP again to your device and the kernel you need to download the official firmware for your Note 5 because it seems that you messed up real bad with you phone.
Just google official firmware N9208 and download it to then flash it through ODIN in download mode, then after installing the Firmware boot up the phone and set it up, after that you go to Developers Mode and enable OEM and USB Debugging, after that you download the kernel i provided above for your N9208 IN YOUR PHONE. Afterwards, go to Download Mode and flash TWRP through ODIN in your phone and then boot up the recovery and flash the kernel that is in thr internal storage of your phone in the Download folder. Now the phone should br rooted. If you still didn't understand the instructions then look up this video https://youtu.be/We6OUJvzve0
hope it works for you ?
Luis_0 said:
But before you flash the TWRP again to your device and the kernel you need to download the official firmware for your Note 5 because it seems that you messed up real bad with you phone.
Just google official firmware N9208 and download it to then flash it through ODIN in download mode, then after installing the Firmware boot up the phone and set it up, after that you go to Developers Mode and enable OEM and USB Debugging, after that you download the kernel i provided above for your N9208 IN YOUR PHONE. Afterwards, go to Download Mode and flash TWRP through ODIN in your phone and then boot up the recovery and flash the kernel that is in thr internal storage of your phone in the Download folder. Now the phone should br rooted. If you still didn't understand the instructions then look up this video https://youtu.be/We6OUJvzve0
hope it works for you ��
Click to expand...
Click to collapse
Thank you SO much for that detailed reply. I understand the instructions but is it alright if instead of flashing a stock firmware I just factory reset my phone?
PatelCartel said:
Thank you SO much for that detailed reply. I understand the instructions but is it alright if instead of flashing a stock firmware I just factory reset my phone?
Click to expand...
Click to collapse
You could give it a try if it works...
I want to run Viper 4 android but the root is systemless. From my understanding I have to be using regular root to use Viper 4 android.
My question is, is it possible to go from systemless root to regular root?
Thanks
Just follow the instructions, flash MM, flash twrp, flash the latest SuperSU beta, load your apps. Then flash freeza's beast mode kernel that was released today on the Android development section. Then install viper as usual. I flashed the kernel at lunch and viper is running fine.
Sent from my SM-N910T using XDA-Developers mobile app
So I got a replacement note 4 which is now sm-n910t3 instead of sm-n910t. When i go to install twrp thru odin it says passed but when i go to boot into recovery i still have stock recovery..what gives..I did take ota so im on mm 6.0.1
mikemoney said:
So I got a replacement note 4 which is now sm-n910t3 instead of sm-n910t. When i go to install twrp thru odin it says passed but when i go to boot into recovery i still have stock recovery..what gives..I did take ota so im on mm 6.0.1
Click to expand...
Click to collapse
Update: I was able to get it to work by doing a battery pull:good:
Ok what you need to do is download the tool SAMFIRM in the general thread. fill in the model and region which will be SM-T700 and KOO in region section . wait for it to download once it says decrypt finished extract tar from zip with winrar then flash tar in Odin. Once odin has flashed it then tab reboots put it into stock recovery, hold home button volume up and power button together and hold for 4/5 seconds then let go. wipe data factory reset then let it boot. Enjoy
Why the need to wipe data/reset? Samsung stock upgrades are always compatible with the previous data.
It was bootlooping
suburbadroid said:
It was bootlooping
Click to expand...
Click to collapse
Most likely just needed dalvik wiping.
I would dirty flash, boot then wipe data only if necessary.
Factory reset was the first option I seen in stock recovery. Not used to being in stock recovery normally twrp
I am trying to flash it with Flashfire due to keep rooted.
Had to to wipe factory reset from recovery.
Good Lock works fine, but appears a little thin
Just reroot after flashing via Odin if flash fire don't work
Guys,sorry for the noobish question,
do you confirm I can eventually get back to my lollipop ROM with a full TWRP backup after flashing MM?
If you've backed it up on a external device then yes sure. You will need to reroot after flashing this though.
suburbadroid said:
Just reroot after flashing via Odin if flash fire don't work
Click to expand...
Click to collapse
Sorry but what root do you use, the old chainfire root for Lollipop?
Yes I'm sure cf auto root works. I haven't tried it but t805 users have so it should work.
suburbadroid said:
Yes I'm sure cf auto root works. I haven't tried it but t805 users have so it should work.
Click to expand...
Click to collapse
Nope wont work. Flash supersu with twrp.
Sent from my SM-T805 using XDA-Developers mobile app
Thanks for keeping us right ashyx
TWRP,Supersu and Xposed working :good:.
(got the following message whenever I enter the recovery: "recovery is not seandroid enforcig"..still it doens't seems to affect anything )
Here is what I did in case some newcomer like me is asking:
1) flashed the rom with odin and booted in
2)flashed twrp with odin (the one kindly provided by Ashyx here TWRP)
3)flashed supersu with twrp (SuperSU)
4)flashed xposed 86.0 sdk23 arm from wanam's thread with twrp (here)
Any idea about the "recovery is not seandroid enforcig" thing?
Does anyone know if its possible to enable adoptive storage in this?
Tonyspo said:
Any idea about the "recovery is not seandroid enforcig" thing?
Click to expand...
Click to collapse
It means nothing. The Tab S didn't support this warning until MM, so nothing was required to remove it.
It's trivial for me to remove it, but more hassle than its worth considering it means nothing.
I actually prefer to have it as it clearly indicates Iam booting into recovery.
Tonyspo said:
TWRP,Supersu and Xposed working :good:.
(got the following message whenever I enter the recovery: "recovery is not seandroid enforcig"..still it doens't seems to affect anything )
Here is what I did in case some newcomer like me is asking:
1) flashed the rom with odin and booted in
2)flashed twrp with odin (the one kindly provided by Ashyx here TWRP)
3)flashed supersu with twrp (SuperSU)
4)flashed xposed 86.0 sdk23 arm from wanam's thread with twrp (here)
Any idea about the "recovery is not seandroid enforcig" thing?
Click to expand...
Click to collapse
Twrp and supersu work on mm t-700 ?
Sent from my SM-T700 using XDA-Developers mobile app
xlorxlarge said:
Twrp and supersu work on mm t-700 ?
Sent from my SM-T700 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes
It means nothing. The Tab S didn't support this warning until MM, so nothing was required to remove it.
It's trivial for me to remove it, but more hassle than its worth considering it means nothing.
I actually prefer to have it as it clearly indicates Iam booting into recovery.
Click to expand...
Click to collapse
Thank you for the explanation
ashyx said:
Nope wont work. Flash supersu with twrp.
Sent from my SM-T805 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have rooted my T700 with chainfire root for Lollipop and it works fine, I am using Titanium Backup and Superuser Pro without problems.
MartinBM said:
I have rooted my T700 with chainfire root for Lollipop and it works fine, I am using Titanium Backup and Superuser Pro without problems.
Click to expand...
Click to collapse
For MM?