[ROM][7.1][LineageOS(CM)14.1 and CM13][UnOfficial] (Nougat) [jem] - 8.9" Kindle Fire HD Android Development

LS unofficial builds for the JEM
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
download:
new: https://www.mediafire.com/folder/iiuqc32f8z6ce/jem
old: https://www.mediafire.com/folder/5olnizsgh2jz5/jem
old: https://www.mediafire.com/folder/dtsa7p6v17436/jem
backup before flash, gapps need for upgrade, don`t flash SuperSU
http://opengapps.org/ (arm, 6.0)
Kernel auditor - Low memory killer - Very aggressive
If you install Gapps after the ROM has been booted for the first time you either need to wipe data and reboot. Without this Gapps will crash constantly. This is due to the new permissions-system in M.
bluetooth lte-version fix: https://forum.xda-developers.com/ki...elp/kindle-fire-hd-8-9-bluetooth-rom-t3315904

Great news!!

build 20160215 (backup before flash, gaaps need for upgrade): http://www.mediafire.com/download/njvq7ur336ca9rm/cm-13.0-20160215-UNOFFICIAL-jem.zip

Transi, you are brilliant!! All we need now is TWRP 3.0.0 (and maybe official CM13 nightlies ), and we're halfway there.

Thanks for this rom , I am having an error though that I need some help with. All the info first
Kindle fire HD 8.9- Rooted by following the cm kindle fire HD 8.9 wiki
Installed Recovery TWRP 2.8.7.0, device was wiped and internal storage formatted before each of the following roms were tested
gapps were downloaded from open gapps .org, the arm mini version was used with each respective rom. gapps were installed by adding the zip file to the list of items to be installed by twrp.
ROMS installed
CM 11
CM 12
CM 13
[resurrection remix 5.6.1] [jem] [6.0.1 marshmallow]
AICP - 11.0 - M 6.0.1 jem - unofficial
On each ROM either Bluetooth turns itself on and off constantly if you attempt to turn it on or the unfortunately Bluetooth share has stopped warning will constantly pop-up until the kindle is restarted.
After going through 5 roms I figure it must something I did wrong as the Bluetooth was working with the stock rom before I rooted the kindle , any ideas on what I should try to get Bluetooth working on this?

The_GreaseMan said:
Thanks for this rom , I am having an error though that I need some help with. All the info first
Kindle fire HD 8.9- Rooted by following the cm kindle fire HD 8.9 wiki
Installed Recovery TWRP 2.8.7.0, device was wiped and internal storage formatted before each of the following roms were tested
gapps were downloaded from open gapps .org, the arm mini version was used with each respective rom. gapps were installed by adding the zip file to the list of items to be installed by twrp.
ROMS installed
CM 11
CM 12
CM 13
[resurrection remix 5.6.1] [jem] [6.0.1 marshmallow]
AICP - 11.0 - M 6.0.1 jem - unofficial
On each ROM either Bluetooth turns itself on and off constantly if you attempt to turn it on or the unfortunately Bluetooth share has stopped warning will constantly pop-up until the kindle is restarted.
After going through 5 roms I figure it must something I did wrong as the Bluetooth was working with the stock rom before I rooted the kindle , any ideas on what I should try to get Bluetooth working on this?
Click to expand...
Click to collapse
I think maybe something wrong with your bluetooth module, it is a hardware issue i think.

The_GreaseMan said:
Thanks for this rom , I am having an error though that I need some help with. All the info first
Kindle fire HD 8.9- Rooted by following the cm kindle fire HD 8.9 wiki
Installed Recovery TWRP 2.8.7.0, device was wiped and internal storage formatted before each of the following roms were tested
gapps were downloaded from open gapps .org, the arm mini version was used with each respective rom. gapps were installed by adding the zip file to the list of items to be installed by twrp.
ROMS installed
CM 11
CM 12
CM 13
[resurrection remix 5.6.1] [jem] [6.0.1 marshmallow]
AICP - 11.0 - M 6.0.1 jem - unofficial
On each ROM either Bluetooth turns itself on and off constantly if you attempt to turn it on or the unfortunately Bluetooth share has stopped warning will constantly pop-up until the kindle is restarted.
After going through 5 roms I figure it must something I did wrong as the Bluetooth was working with the stock rom before I rooted the kindle , any ideas on what I should try to get Bluetooth working on this?
Click to expand...
Click to collapse
Can you enable Bluetooth and then get a logcat? Bluetooth works fine on my jem, so you must have a hardware issue.
Sent from my Amazon Jem using XDA Labs

monster1612 said:
Can you enable Bluetooth and then get a logcat? Bluetooth works fine on my jem, so you must have a hardware issue.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Funny, I am pretty sure it was working when I was stock.
Grabbing the logcat now and will post it shortly.

Deep Sleep Issues fixed?

jaramosp said:
Deep Sleep Issues fixed?
Click to expand...
Click to collapse
coming soon

o.k., thanks!! excellent work!

build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/ivxy6e83x0sp4fr/cm-13.0-20160218-UNOFFICIAL-jem.zip
deep sleep fixed

transi1 said:
build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/ivxy6e83x0sp4fr/cm-13.0-20160218-UNOFFICIAL-jem.zip
deep sleep fixed
Click to expand...
Click to collapse
cool man!
are you going to port fix on AICP ?
thank you

mrbender666 said:
are you going to port fix on AICP ?
Click to expand...
Click to collapse
yes

deep sleep issue fixed, thanks!! this rom is very smooth and stable. A question, cast screen worked in kitkat cm11 with mirror enabler by r3pwn, since cm12 this fix don't work., do you can enable it in this rom?

Thank you, it's very good ROM
---------- Post added at 02:25 AM ---------- Previous post was at 02:04 AM ----------
Hey, it do not rotate screen,

Like this rom, love you man, better than cm12.

jaramosp said:
deep sleep issue fixed, thanks!! this rom is very smooth and stable. A question, cast screen worked in kitkat cm11 with mirror enabler by r3pwn, since cm12 this fix don't work., do you can enable it in this rom?
Click to expand...
Click to collapse
hdmi mirro or chrome cast?
on omap4 device hdmi mirror functions without sound or 720 instead 1080, so i decided don`t debug hdmi.
chrome cast must works, can anybody test this function?

Hi transi1
Chromecast works perfectly, I was talking about cast screen "With it, users just tap a single icon to have everything on their screen magically projected onto a television. Forget waiting for individual apps to implement Chromecast support, this feature will let you mirror all the things, and it opens up a world of mobile games to a screen size many of them have never seen before...".
This is the link about r3pwn:
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
thank you for your support!

jaramosp said:
Hi transi1
Chromecast works perfectly, I was talking about cast screen "With it, users just tap a single icon to have everything on their screen magically projected onto a television. Forget waiting for individual apps to implement Chromecast support, this feature will let you mirror all the things, and it opens up a world of mobile games to a screen size many of them have never seen before...".
This is the link about r3pwn:
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
thank you for your support!
Click to expand...
Click to collapse
screen mirroring is feature for samsung and sony tv`s, i can`t debug this, sorry

Related

[ROM] CyanogenMod 7 for the HTC Wildfire :: V7.1.0.1 (10 Oct 2011)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Wildfire, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post​
CyanogenMod:
Latest version: update-cm-7.1.0.1-buzz
Download: link
Mirror: link
MD5sum: 9d520a60b44d269a83b6bdbe1964d1a7​
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link​
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
first link: 404 Not Found
/get/update-cm-7.1.0.1-buzz-signed.zip
second link: This page has been removed or never existed
now its work
In Cyanogenmod download mirror you have provided a link to HTC legend stable (By the looks you did).
The correct one: http://goo-inside.me/cm/buzz/stable/update-cm-7.1.0.1-buzz-signed.zip
and the one that you provided : http://goo-inside.me/cm/legend/stable/update-cm-7.1.0.1-buzz-signed.zip
Copy/pasting can be a *****...
The links should be correct in the other release thread.
The application status bar force closes..i have wiped data n flashed the new ROM..anything that im missing?
goldbeard said:
The application status bar force closes..i have wiped data n flashed the new ROM..anything that im missing?
Click to expand...
Click to collapse
Are you sure you installed 7.1.0.1 and not 7.1.0 that was released yesterday? Just installed it (7.1.0.1), and there doesn't seem to be anything wrong.
Just installed v7.1.0.1, everything working fine
I felt it was time to do a full wipe of everything, to start a clean fresh install
For now the things i tried work
Thanks for the quick updated fix to all who work on htis
Does LauncherPro works now? yesterday on 7.1.0 it didn't worked (force close).
stuffynet said:
Does LauncherPro works now? yesterday on 7.1.0 it didn't worked (force close).
Click to expand...
Click to collapse
LauncherPro works without a problem
3xeno said:
Are you sure you installed 7.1.0.1 and not 7.1.0 that was released yesterday? Just installed it (7.1.0.1), and there doesn't seem to be anything wrong.
Click to expand...
Click to collapse
I installed 7.1.0 and I thought both were the same (even the file sizes were same)...now i know the difference
will try installing 7.1.0.1...so is that a known bug with 7.1.0?
is this 2.3.7 android ?
jst updated to cm 7.1.0.1 .....working fine....tnks a ton
Yes it is and this release works like a charm!
The people at Cyanogenmod should really post this update as the latest one available for Buzz owners on their website, so that future downloaders may not run into the CM7.1.0.0 Status Bar bug , since it is my understanding we all did here
auleu said:
is this 2.3.7 android ?
Click to expand...
Click to collapse
yes it has android s latest version 2.3.7 njoy
if you wanna cheak go to system den about phone
Could someone call himself and report back the ring delay please?
I'm bored of this ruymanca rom now
does is have hotspot ?
calyxim said:
Could someone call himself and report back the ring delay please?
I'm bored of this ruymanca rom now
Click to expand...
Click to collapse
It's far better than what it was initially. 352-652Mhz SmartassV2, call delay is ~1 second. (Counting the time when the phone starts ringing to when the display appears on screen)
auleu said:
does is have hotspot ?
Click to expand...
Click to collapse
It's always had WiFi hotspot.
but did somebody tested it?does it work good?
auleu said:
but did somebody tested it?does it work good?
Click to expand...
Click to collapse
Using it every day, wireless and wired tethering works beautifully.
really fast rom

[ROM][4.4][NIGHTLIES]OmniROM[Xperia T][mint]

OmniROM is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance, reliability and features over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
OmniROM is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
All the source code for OmniROM is available in the OmniROM Github repo.
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
Official OmniROM Wiki:
http://docs.omnirom.org
First time installing OmniROM to your Xperia T, or coming from another ROM:
- Read known issues and FAQs
- Copy GApps and OmniROM ZIPs to your SDCard
- Boot into Recovery
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Issues:
AFAIK none at all
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Nightlies:
http://dl.omnirom.org/mint/
Questions:
Feel free to ask here or in #omni on irc.freenode.net
To Kangers:
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open Source doesn't mean Out of Respect!
XDA:DevDB Information
OmniROM, a ROM for the Sony Xperia T
Contributors
tilal6991
ROM Kernel: Linux 3.4.x
Based On: OmniROM
Version Information
Status: Testing
Created 2013-11-14
Last Updated 2014-05-05
Reserved
Changelog:
30/03:
Switched to the 4.3 kernel from Sony: this fixes stability issues (i.e. blue screens) and MHL (HDMI out)
28/11:
Nighlies begin
26/11:
Sync with Omni sources - many new features and loads of settings have been added
Improve performance by using qcom branches of Omni repos - will become mainline soon
Add SELinux stuff - will become enforcing in the next version
Fix apps disappearing off SD card every reboot.
Other bug-fixes
19/11:
Sync with Omni sources
Hopefully fix any Bluetooth audio issues
Make ART compatible with previously incompatible apps (WhatsApp etc.)
Fix in-built TWRP mounting issues
13/11:
Initial release
Derp.
First!
This is wonderful news! Hope to try it soon thanks
Is this initial build without ril bug right? And can i ask also if gps is working?
moly82 said:
First!
This is wonderful news! Hope to try it soon thanks
Is this initial build without ril bug right? And can i ask also if gps is working?
Click to expand...
Click to collapse
If you had read his messages (for example, in Thomas' threat), you would not ask.
I did read in issues only no hdmi out but who knows.. it seems strange to me that's the only problem in the first experimental build and unfortunately I won't be able to try it before tomorrow evening (no internet) ;( well I'll see tomorrow great job in any case tilal thanks for keeping developing on T :good:
Yes RIL and GPS are both working in any case. That is why HDMI out is listed as the only bug.
You are great at last a official thread about omni can't wait to try it thanks to you!
Downloading
Has anybody tested the multi-window, does it work?
EDIT: Multi-windows IS working, haven't had anny issue so far. Thanks tilal =D
Everything seems to be running smoothly, even without full wiping from CM 10.2. Unfortunately, it seems that the OmniROM features haven't been included in this series of nightly builds, so I'll probably hold until they are merged.
Good work, @tilal6991!!!
Fantastic work @tilal6991!
Just flashed and had a little play. So far so good. Alas, I'm up for work in 5 hours so I need to sleep. Will use fully tomorrow and will report back.
Again, nice one.
Great!!! Good luck
Sent from my Xperia T using XDA Premium 4 mobile app
Awesome stuff Tilal, typically i had a few hours off to play some BF4 so will have to flash this tomorrow now :good:
Bootloader should be unlocked to install this ROM, correct?
Sent from my LT30p using xda app-developers app
acr82 said:
Bootloader should be unlocked to install this ROM, correct?
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Yeap, as always!
Sent from my Nexus 10 using Tapatalk 4
why I see status 7 when I Was Flashing And Flashing failed???
What should I Do???
Mahthenewgamer1998 said:
why I see status 7 when I Was Flashing And Flashing failed???
What should I Do???
Click to expand...
Click to collapse
Make sure the file you downloaded isn't corrupt, you can also wipe data before flashing
for any reason I am always stuck on boot after flashing...I followed instructions in OP precisely of course...feel a little noobish :silly:
EDIT: ok, got it workin now...that's what I did (maybe useful for others in same situation):
- flashed OMNIRom 4.3 first
- booted in Recovery
- flashed OMNIROM 4.4
- Full Wipe
- reboot
- booting back in Recovery
- flashing Gapps
- reboot
fyi, I was coming from latest MIUI
First of all, thanks tilal for your great work!
Not any major issue so far. Sound seems a bit laggy though. I also got 2 blue screens.
Suggested recovery for flashing this? TWRP?

[ROM][T][L][5.0.2] CyanogenMod 12 official nightly builds

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
OFFICIAL CYANOGENMOD WIKI
http://wiki.cyanogenmod.org/w/Mint_Info
Please read before posting!
KNOWN ISSUES PAGE
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_mint
Please read before posting!
HOW TO INSTALL CM?
http://wiki.cyanogenmod.org/w/Install_CM_for_mint
ATTENTION:
To be able to use your internal sdcard, you have to extract and run the following script (windows only) after your device has fully booted:
fix_storage_permissions.zip - 510.47 KB
WHERE TO GET CM?
Official nightly builds:
http://download.cyanogenmod.org/?device=mint
Google Apps:
http://wiki.cyanogenmod.org/w/Google_Apps
Alternative: http://goo.im/gapps
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors!
XDA:DevDB Information
CyanogenMod 12, ROM for the Sony Xperia T
Contributors
codeworkx, updateing, WhiteNeo
Source Code: http://github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2015-01-12
Last Updated 2015-01-12
Yes, great work man, waiting for first build to pop out .... Thank you very much, finally official nightly with support from the legend codeworkx
I'm glad this is up
Thanks!
Am I going crazy over here or Gapps just won't work for me with this build?
I did a full wipe, installed the nightly, then installed PA Gapps and gapps just crash like crazy right after boot.
I then did a full wipe again, installed the rom, installed banks gapps hoping it will work this time, but NOPE, it doesn't bite...
Here's me doing a full wipe again, installing the rom and waiting for it to boot, then reboot to recovery, flash Gapps, but same thing happens. Setup wizard crashes and everything else gapps-related crashes too... This is a lot of fun! I'll keep trying to fix the problem, but I'd also welcome suggestions. ^_^
How can I get root?
weijianhui said:
How can I get root?
Click to expand...
Click to collapse
Go into developer options (you should enable those first) and then enable root.
Chefov01 said:
Go into developer options (you should enable those first) and then enable root.
Click to expand...
Click to collapse
OK,I got it,thanks.
I haven't mobile data anyone confirm the bug.... If no error I full wipe and install again....
quintas84 said:
I haven't mobile data anyone confirm the bug.... If no error I full wipe and install again....
Click to expand...
Click to collapse
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Flashed the nightly, after a system/data wipe. I get stuck on setup wizard and google vocal assistant (if I remember the name) force closing, after entering my SIM PIN, regardless if I flash latest KK GApps, LP ones or nothing at all apart from the ROM. Is there anything I'm missing, that I should be aware of?
Chefov01 said:
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Click to expand...
Click to collapse
I dirty flash over whiteneo home build .... Try gapps in whiteneo thread....
PS I return to home build
Try these gapps: http://d-h.st/YQG
It worked! I also wiped system, this time, so I really don't know what made it work, but I'm proceeding in the setup wizard now. Thanks!
Chefov01 said:
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Click to expand...
Click to collapse
I can confirm the same issue. That's the only one I found for the moment, though.
Same issue here. Did someone fix it?:crying:
rg1994 said:
Same issue here. Did someone fix it?:crying:
Click to expand...
Click to collapse
Same here..... Clean and dirty install. No mobile data
Chefov01 said:
Am I going crazy over here or Gapps just won't work for me with this build?
I did a full wipe, installed the nightly, then installed PA Gapps and gapps just crash like crazy right after boot.
I then did a full wipe again, installed the rom, installed banks gapps hoping it will work this time, but NOPE, it doesn't bite...
Here's me doing a full wipe again, installing the rom and waiting for it to boot, then reboot to recovery, flash Gapps, but same thing happens. Setup wizard crashes and everything else gapps-related crashes too... This is a lot of fun! I'll keep trying to fix the problem, but I'd also welcome suggestions. ^_^
Click to expand...
Click to collapse
Same here. I cannot manage to install gapps.
And I also enabled the root access via developer settings, but didn't work. The xperia T just freezes when I try to get the root access in an app. :silly:
For a moment after flashing the latest nightly I seemed to have mobile data working. While setting up my phone with the initial setup wizard, "3G" appeared on the signal icon and little arrows went back and forth. That lasted seconds, then was replaced by an esclamation mark and there was no mobile data ever since...
cm12 nightlies stopped till data is fixed.
back to cm11 weekly builds.

[5.1.1] [SM-T700] CyanogenMod 12.1 Nightlies for the Tab S 8.4 (klimtwifi)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
Mod edit:
Download links removed for lack of GPL compliance.
Useful Links
Unofficial changelog
klimtwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
In particular I would like to thank:
@crpalmer for his work porting cm12 to the picassowifi. It was of great help getting cm12 on the sm t700
@nvertigo67 && @UpInTheAir for their kernel magic and misc fixes
XDA:DevDB Information
CyanogenMod 12.0 for klimtwifi (Tab S 8.4)
Contributors
@eousphoros
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-03-13
Last Updated 2015-03-13
Awesome stuff! Excited to give it a try.
Edit: Super smooth and very pleasant to use. Thank you!
After all this time...
Been away for a while. Heard about the news and thought I'd stop by to congratulate you for the official release. I've been reviewing the threads and am frankly stunned at your attitude and work ethic. Thank you very much and I'll be sure to post if anything isn't up to snuff.
I am so glad to see this. Another great device saved from the buggy laggy touchwiz. Have been using the bliss cm12 with mine. I will flash this asap
Congrats on the official release! Is there anything we need to flash in order to get vibration for the capacitive keys working?
You just made my day. Rooted, flashed and looks great!
(finally no more touch wizz)
Congrats on your official release. I've been using CM12 unofficial since the first day I bought the Tab S. Runs buttery smooth ever since (it's been about a month or two). Still runs silky smooth, no lag and even better no touchwizz Just did a clean install to the new update.
Two thumbs up!
Same here, I think my tablet spent 30 minutes on stock before running your CM12. The official is even smoother, so really thanks a lot
My tablet gets stupidly slow and choppy randomly on this official release
Sent from my SM-T700 using XDA Free mobile app
---------- Post added at 03:52 AM ---------- Previous post was at 02:55 AM ----------
Nvm figured it out. It was the auto display where it changes your screen temperature at night. It made my tablet laggy for some reason
Sent from my SM-T700 using XDA Free mobile app
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Enddo said:
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Click to expand...
Click to collapse
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
nvertigo67 said:
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
Click to expand...
Click to collapse
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Enddo said:
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Click to expand...
Click to collapse
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
What about hardware support? FP Sensor, Cam, Hdr, etc.? Is everything there?
nvertigo67 said:
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
Click to expand...
Click to collapse
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
AFter researching and testing I posted this.
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
I tried and it does work. Look for all update services in disable service and check them off. Sleeping well now.
twped said:
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Click to expand...
Click to collapse
Screen off was fine for me but as soon as its on the music was choppy. Tried different governors to no effect.
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
interfreak said:
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
Click to expand...
Click to collapse
Do you have the TWRP recovery installed?
The auto updating feature just creates a script that is loaded in TWRP and then tries to boot up into TWRP to run the script(aka dirty flash the nightly it just downloaded).
If you have CWM(like we've been using since before the official nightlies) as the recovery, then you can't auto update

[ROM][V500][5.1.x][CM12.1] Official CyanogenMod 12.1

CyanogenMod 12.1 (CM 12.1)
Android 5.1.x for LG G Pad 8.3 V500​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
About CM:
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Wiki:
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/V500_Info
Important Information:
Be sure you are using latest available recovery!
Download:
http://download.cyanogenmod.org/?device=v500
Installation:
Read the official wiki
Copy GApps and CM12.1 ZIPs to your internal SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CM12.1 zip from internal SDCard
Flash GApps zip from internal SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
Copy CM12.1 ZIP to your internal SDCard
Boot into Recovery
Flash CM12.1 zip from internal SDCard
Reboot
Important Information for kangers:
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Used sources:
https://github.com/cyanogenmod
XDAevDB Information:
CM 12.1 ROM for the LG G Pad 8.3 (V500)
Contributors:
CyanogenMod Team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.0
Version Information
Status: Testing
Patches that still need to be merged to official sources:
Updated audio policy to fix microphone with Google Hangouts
cm-12.1-v500-audio-policy-sample-rate-signed.zip
@Deltadroid is this Bumped?
Jansxel said:
@Deltadroid is this Bumped?
Click to expand...
Click to collapse
No, CM has not officially merged bump for the v500 yet. But, this works:
http://forum.xda-developers.com/showthread.php?t=3081457
Edit: CM12.1 is now bumped.
Ive *finally* figured out why most of the games wont install from the Amazon App Store. There appears to be a conflict with lollipop's ability to move applications to the sdcard and Amazon App Store. But, there is a way of temporarily fixing it.
Open terminal and type:
Code:
su
umount /storage/sdcard1
Now the sdcard is unmounted and all the games can be installed from Amazon App Store. Physically removing the sdcard would also work.
Edit: removed outdated files and replaced with instructions using terminal commands.
A bug I've found is that live wallpapers don't work; the screen becomes proper screwed up. I'll post a screen cap when I get a chance!
Hey guys,
For use as a daily driver, would you recommend sticking to CM11 M12, or is it ok to jump to latest 12 or 12.1 nightlies?
It will be for my Dad, so looking at ROM that won't need to be updated for a while...
Cheers,
Su
Deltadroid said:
Ive *finally* figured out why most of the games wont install from the Amazon App Store. There is a conflict with lollipop's ability to move applications to the sdcard and Amazon App Store. But, there is a way of temporarily fixing it. If you go to Settings --> Storage and unmout the sdcard, then go back to the Amazon App Store, you can install EVERYTHING. So... wait, there is no "unmount" button in the storage settings you say? Ive patched framework-res.apk from today's nightly CM12.1 build (20150420) to add the "unmount" button back in the storage settings like it should be. I dont know why CM has not yet merged the patch I submitted to add this button back in.
Click to expand...
Click to collapse
Now that's a nice find. The problem is not only with the Amazon app store but with all apks not downloaded through the Play Store. Some install, some not. I've verified this with CM 12 by removing the sd card. I did not have this with AOSP 5.0.2, 5.1 and Stock Lollipop. So this seems to be a bug in CM 12, 12.1 (besides the inability to remove the SD card by software).
BTW: Another obscure bug I encountered in 12.1 is that the date of the reviews in the Play Store (German) is MMDDYYYY (it should be DDMMYYYY). Tried different gapps for 5.1.
There were some problems, but they seem fixed in the new cm12.1 from today (21.04).
Brightness works + playstore keeps crashing everytime I try to start it.
Is there any reason why the newest nightlies don't appear under setting - about tablet - cyanogen updates?
Hi
Currently on 21/04 nightly. Getting random reboots, access internet site, suddenly tab reboots. Has also happened when I was on 18/04 and accessed settings to check for cyanogen updates (which by the way) were showing not available .
Stransky
Sent from my LG-V500 using Tapatalk
Stransky said:
Hi
Currently on 21/04 nightly. Getting random reboots, access internet site, suddenly tab reboots. Has also happened when I was on 18/04 and accessed settings to check for cyanogen updates (which by the way) were showing not available .
Stransky
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Have you tried replacing trebuchet as the launcher? I've had much less problems using Google Now Launcher or Nova Launcher.
solved
How to root this ROM? It seems not pre-rooted. Thanks.
thangnh said:
How to root this ROM? It seems not pre-rooted. Thanks.
Click to expand...
Click to collapse
You have to enable root under development settings [emoji6]
CM12.1 has been updated to Android 5.1.1 with latest nightly build.
Ultraman1966 said:
A bug I've found is that live wallpapers don't work; the screen becomes proper screwed up. I'll post a screen cap when I get a chance!
Click to expand...
Click to collapse
Live wallpapers are working here with latest build.
Deltadroid said:
CM12.1 has been updated to Android 5.1.1 with latest nightly build.
Click to expand...
Click to collapse
Updated to 20150422 nightly (dirty flashed over 20150418) and left the tablet on over the night: Battery stayed at 89% over 7 hours. I am facing no stability issues so far.
Great job!
Currently I flash every Nightly and it is stable so far. Bluetooth reconnecting issue persists, everything else is working fine.
ThunderBolt_BR said:
Updated to 20150422 nightly (dirty flashed over 20150418) and left the tablet on over the night: Battery stayed at 89% over 7 hours. I am facing no stability issues so far.
Great job!
Click to expand...
Click to collapse
You mean you flashed cm12.1 without wiping cm12 right? I wanna try cm12.1 but don't want to wipe everything.
Vietanh198 said:
You mean you flashed cm12.1 without wiping cm12 right? I wanna try cm12.1 but don't want to wipe everything.
Click to expand...
Click to collapse
No. When I first installed CM12.1 (The nightly from 20150416) I did a clean install. Doing so is always recommended when installing a newer version of android.
[]'s

Categories

Resources