SAMSUNG GALAXY TAB 3 (7.0) (lt02ltexxx & lt02ltetmo)
MARSHMALLOW ROM COLLECTION
BY: DarkFrenzy and lilferraro
NOTE: FOLLOW THE INSTRUCTIONS CAREFULLY AND ONLY DOWNLOAD SERRANOLTEXX (GT-I9195) ROMS
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
====================================================================================================
CM13
ROM: CM13 NIGHTLY
GAPPS: OPEN GAPPS
SOURCE: [GT-I9190/I9195][ROM][Official][6.0.1] CyanogenMod 13.0 for S4 Mini 3G/LTE
ROM MAINTAINER: @arco68
CREDITS: @arco68
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
====================================================================================================
BlissRoms
ROM: Bliss V6.1-201603214-1021.zip
GAPPS: Open-GApps
SOURCE:[Rom][Unofficial][6.0.1_r16]Bliss v6.1 S4 Mini DUOS/LTE/3G [OTA Update]
ROM MAINTAINER: @tioguda
CREDITS: @tioguda
====================================================================================================
Resurrection_Remix
ROM: RESURRECTIONREMIX-M
GAPPS: OPEN GAPPS
SOURCE: [[ROM][RESURRECTION-REMIX v5.6.5][UNOFFICIAL][GT-I919X][6.0.1_r22][31.03.16]
ROM MAINTAINER: @Blackjubel
CREDITS: @Blackjubel
====================================================================================================
AICP11
ROM: AICP11-MM-NIGHTLY
GAPPS: OPEN GAPPS
SOURCE: [ROM] [ serrano 3G & LTE ] AICP - 11.0 - MM 6.0.1_r3 | OFFICIAL NIGHTLIES
ROM MAINTAINER: @semdoc
CREDITS: @semdoc
====================================================================================================
TEAM WIN RECOVERY PROJECT
RECOVERY: TWRP-3.0.1-YOU MUST FLASH
***IF U WANT TO USE F2FS FORMAT FOR DATA AND CACHE
CHANGING DATA PARTITION TO F2FS:
BOOT TO RECOVERY -- GOTO WIPE -- SELECT ADVANCE WIPE -- SELECT DATA AND PRESS REPAIR OR CHANGE FILE SYSTEM -- SELECT CHANGE FILE SYSTEM ---- SELECT F2FS --- SWIPE TO CHANGE
================
CHANGING CACHE PARTITION TO F2FS:
GOTO WIPE -- SELECT ADVANCE WIPE -- SELECT CACHE AND PRESS REPAIR OR CHANGE FILE SYSTEM -- SELECT CHANGE FILE SYSTEM ---- SELECT F2FS --- SWIPE TO CHANGE
***REMEMBER THAT DOING SO WILL WIPE THOSE PARTITIONS
====================================================================================================
INSTALLATION
***Remember that you are responsible for your device
- FLASH the TWRP-3.0.1-Recovery
- Download ROM and OPEN GAPPS 6.0 arm pico
- Download lt02ltexx-patcher-3.0.zip
- Download CM13 kernel from third post
- Boot into Recovery
- Make Backup
- Wipe / Factory Reset
- Flash
* ROM
* GAPPS
* LT02LTEXX-PATCHER-2.0.ZIP
* CM13 KERNEL
- Reboot System
UPDATE:
When You Get OTA update
Download the Rom update
- Reboot into Twrp Recovery (no need to wipe and no need to flash gapps when upgrading)
- Flash
* ROM
* LT02LTEXX-PATCHER-2.0.ZIP
* CM13 KERNEL
- Reboot system
THANKS
Code:
-CYANOGENMOD
-TEAM BLISS
-RESURRECTION REMIX TEAM
-AICP
[email protected]
[email protected]
[email protected]
[email protected]_Troy
-OPEN_GAPPS
[email protected]
[email protected]
[email protected]
-GOOGLE
-TESTERS
-Anyone who helped in the development of the source code.
--Remember that these ROMS are ports of the original roms. So most issues are resolved in their original threads listed above. Only the Kernels in each ROM are built from source by either @DarkFrenzy or @lilferraro.
--Instead of listing every feature/bug we've posted the source thread of each ROM (above) which has all information needed. While you're there dont forget to support good the Developers for their hard work....
~~ENJOY~~
XDA:DevDB Information
Unofficial 6.0 Port Collection, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
lilferraro, DarkFrenzy
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-02-23
Last Updated 2016-04-14
Reserved
KERNEL TESTING FOR UPCOMING ROMS
LINARO-TEST1-KERNEL.zip
Features
- Added CPU Overclock 1944mhz (1998 & 2052mhz will freeze)
- Added Underclock 192mhz
- Added GPU Overclock 627mhz
- Added Governors and i/o schedulers
- KSM
-Fast Charge
- Undervolting
- Alucard Hotplug / Msm Hotplug
- Battery Improvements (needs more work)
- Z-Ram and more....
**NOTE**
- It is recommended that you use undervolt (1275mV and under for high freq.) to prevent overclock freezing
- Please use Performance Control apk for Overclock (Hardlimit bug)
- It is pretty smooth when configured to your liking.
**INSTALL**
- Flash .zip in Recovery/TWRP
- Wipe Cache/Dalvik
- Reboot
- Install Performance Control apk.
~~ENJOY~~
- :laugh: -
***Remember You are responsible for your own device.
This is a test kernel meaning chance of bugs
Please be kind when providing feedback.
Thank You...***
KERNEL FOR ALL CM13 BASED ROMS
Changelog:
- fixed baseband.
- updated to the latest source
NOTE:
This is for all roms based on cm13. it just flashes the kernel so the ram-disk stays untoched.
Downloads:
Stock-CM13-Kernel
Tweaked Kernels:
BlissKernel
BATTERY PATCH:
INFO: This Patch Will Remove Camera And SIM Feature.
changelog:
1. No more battery drains.
2. it removes camera and RIL
Downloads:
BatteryFix
Question
So these ROMs will work for the sm-t217s? The thread is kinda confusing....
CTew89 said:
So these ROMs will work for the sm-t217s? The thread is kinda confusing....
Click to expand...
Click to collapse
Yes it will work
Sent from my ASUS_T00J using XDA Free mobile app
Thank u
CTew89 said:
So these ROMs will work for the sm-t217s? The thread is kinda confusing....
Click to expand...
Click to collapse
SM-T217S is the model number. lt02ltexxx is the name of device...
will these work on the T210 or just the T217 version
I love you guys !!!
omg omg omg we had no support for this tablet forever, i thought we were going to be stuck on kit kat
how about T110?
sorry this is for t-217 versions only....
*Currently working on battery drain and overclock for the kernel
Check out the new kernel here if you want to test overclock and other features...
This is a pretty standard ROM flash but for me theyre not working..Is there something i am doing wrong? or are other people having problems also?
RonAbruzzi said:
This is a pretty standard ROM flash but for me theyre not working..Is there something i am doing wrong? or are other people having problems also?
Click to expand...
Click to collapse
I flashed the cm 13 ROM with the test kernel listed by lilferarro just up above your post without any issues besides the first download from 4shared being corrupt and not knowing how to get the md 5 for the download and then getting an output error of corrupt zip after the flash. So this is what I did ...I downloaded twrp 3.0 recovery zip with f2fs support from Dark Freny . then downnloaded the cm.13 nightly ROM again from this thread. As well as the Test kernel above your post ,a and put all 3 files on my external sdcard , booted to recovery flashed flashed twrp 3.0 zip from Dark Frenzy with f2fs support then rebooted back into recovery did a full wipe EXCEPT sdcard .wiped to factory rest then flashed the cm 13 zip by itself after install I hit the back button to flash the test kernel then hit the reboot button and now I'm running cm.13 nightly 6.0 Marshmallow. Hope this helps you or any one else that might be having any issues. Check the download file and make sure the one your getting is not corrupt like the one I got the first time.
http://forum.xda-developers.com/galaxy-tab-3/development-7/recovery-twrp-3-0-0-twrp-2-8-7-0-t217s-t3314363
Sent from my Samsung SM-T217S using XDA Labs
UCEDOUT1 said:
I flashed the cm 13 ROM with the test kernel listed by lilferarro just up above your post without any issues besides the first download from 4shared being corrupt and not knowing how to get the md 5 for the download and then getting an output error of corrupt zip after the flash. So this is what I did ...I downloaded twrp 3.0 recovery zip with f2fs support from Dark Freny . then downnloaded the cm.13 nightly ROM again from this thread. As well as the Test kernel above your post ,a and put all 3 files on my external sdcard , booted to recovery flashed flashed twrp 3.0 zip from Dark Frenzy with f2fs support then rebooted back into recovery did a full wipe EXCEPT sdcard .wiped to factory rest then flashed the cm 13 zip by itself after install I hit the back button to flash the test kernel then hit the reboot button and now I'm running cm.13 nightly 6.0 Marshmallow. Hope this helps you or any one else that might be having any issues. Check the download file and make sure the one your getting is not corrupt like the one I got the first time.
http://forum.xda-developers.com/gal...covery-twrp-3-0-0-twrp-2-8-7-0-t217s-t3314363
Sent from my Samsung SM-T217S using XDA Labs
Click to expand...
Click to collapse
Is the SIM working? Do u use SIM
Sent from my ASUS_T00F using XDA Free mobile app
DarkFrenzy said:
Is the SIM working? Do u use SIM
Sent from my ASUS_T00F using XDA Free mobile app
Click to expand...
Click to collapse
First of all I want to say thank you again for all your work. The SIM is NOT working. Baseband in unknown as well as imei. i think maybe Same issue that you had corrected in kernel for cm.12.1. hope this is the information you needed.
Sent from my TAB lll. SM-T217S running Cyanogenmod 13 nightly and using XDA Labs
UCEDOUT1 said:
First of all I want to say thank you again for all your work. The SIM is NOT working. Baseband in unknown as well as imei. i think maybe Same issue that you had corrected in kernel for cm.12.1. hope this is the information you needed.
Sent from my TAB lll. SM-T217S running Cyanogenmod 13 nightly and using XDA Labs
Click to expand...
Click to collapse
I have compiled baseband working kernel and will post here within an hour
Sent from my ASUS_T00F using XDA Free mobile app
Whats about sm-T211?can we use in it??
rahul309409 said:
Whats about sm-T211?can we use in it??
Click to expand...
Click to collapse
No. This thread is only for SM-217S/T
Sent from my ASUS_T00F using XDA Free mobile app
Sim and Baseband fix........
UCEDOUT1 said:
First of all I want to say thank you again for all your work. The SIM is NOT working. Baseband in unknown as well as imei. i think maybe Same issue that you had corrected in kernel for cm.12.1. hope this is the information you needed.
Sent from my TAB lll. SM-T217S running Cyanogenmod 13 nightly and using XDA Labs
Click to expand...
Click to collapse
Here's CM13.0-LINARO-KERNEL.zip with sim and Baseband fixed .....
Sorry I havent had much time to update the ports. I have been spending all my time trying to build CM13/BLISSROM for our device instead of porting someone else's rom. Im very close!
P.S. I will soon also add sim and Baseband fix to the overclock kernel as well...
~~ENJOY~~
Related
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
[IMPORTANT INFORMATION]
Click to expand...
Click to collapse
This Builds are in Alpha mode so bugs are expected this are also unoffical builds based on Cyanogenmod which everything as stock
Thread will close when FXP Rolls out Nightly which would be soon
[WIKI]
Click to expand...
Click to collapse
Official CyanogenMod Wiki:
HTML:
http://wiki.cyanogenmod.org/w/Yuga_Info
[HOW TO INSTALL]
Click to expand...
Click to collapse
First time installing CyanogenMod 10.2 to your Yuga, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Fastboot flash boot boot.img (from cm10.2 zip)
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10/10.1:
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Wipe data, we're not sure if everything will work yet.
- Reboot
Not Working
-
Working
Radio/RIL
SMS/MMS
Camera(Focal) < Its Awesome
Auto-complete in the Dialer -> Setting -> Dialpad Autocomplete
Etc...
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Unofficials Build
Cyanogenmod Build 07/08/2013 : http://d-h.st/orG
Cyanogenmod Build 08/08/2013 : http://d-h.st/Ts4
Cyanogenmod Build 09/08/2013 : http://d-h.st/wJK
Cyanogenmod Build 10/08/2013 : https://mega.co.nz/#!wpRikbxQ!H6ADlye9276sc31VsiSQfxWfpQgXoRuCmM1F_qbMu4A
GApps : http://fs1.d-h.st/download/00061/9V3/gapps-jb-20130729.zip (Credits Kali-)
SuperSU : http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip < (Credits ChainFire) :good:
Found Bugs Report It Here
to help the freexperia team and cyanogenmod developers in making your device better why not reports bugs you found with catlog attached
stuff which are not implements will be ignored..
I will try my best to get it fix or report it to the developers cheers
Enjoy an Unoffical Support By iKillCypher/xZain
New Project Butter Revisited By Google and Battery Life By Google
greeting FXP And Cyanogenmod
You Can Always Donate If You Think I Have Helped You In Anyway As I Would Be Grateful As It Will Help Me In Many Ways = )
Free Feel To Donate Any Amount
CHANGELOG
Build 07/08
*Initial Build
Build 08/08
*Focal Changes
*Kernel Changes
Find - > CyanogenMod/android_kernel_sony_apq8064 Or CyanogenMod/android_device_sony_yuga
Details : http://review.cyanogenmod.org/#/q/status:merged,n,z
Build 09/08
*Cyanogenmod Updates.
Details : http://review.cyanogenmod.org/#/q/status:merged,n,z
Build 10/08
*Yuga Updates
*NEW Cyanogenmod Vibrator Framework
Details : http://review.cyanogenmod.org/#/q/status:merged,n,z
Thanks for this:beer:
Sent from my C6603 using xda app-developers app
:beer:
PayPal balance: $0.00 USD
you sure mate
hahahahahaha anyway I will build daily and hopefully find bugs.. and get it fixed
Well I'm enjoying a :beer: Yours will follow soon....,
Sent from my C6603 using xda app-developers app
Thanks if It Does cause Im thirsty for it
OK, buy yourself a couple 75T30948GX754901N
Edit: 1500 posts, think I will have another one myself
Hey,
i can't choose a network operator manually. Everytime i try to change it disconnects from the current operator but doesn't connect with any other operator avaliable. Then i need to reboot or activate (an disactivate) the Airplane Mode to get it connecting again.
(I need Vodafone.de but it always automatically connects with Swisscom)
Sent from my C6603 using Tapatalk 4
FCB-Fan
may I know the operator you are using ?
Vodafone but it always connects with Swisscom.
Sent from my C6603 using Tapatalk 4
I would need you to catlog to see what is going :3 ? could you install catlog from google playstore and try switching and pastie here I will see what I can do and try to pinpoint it..
Can't log as phone is being ridiculously slow at restoring apps from android market (not using TB).
Can't open Focal/Camera, and when it finally opens, says "cannot connect to camera" and "insert SD card" (already inserted, ext4)
Have factory reset it, upgraded to latest stock, flashed boot.img, and then Factory reset, flash rom, flash GApps etc.
After 3rd reboot looks fine tho, apps finally restoring from market (sort of).
Seems to work when SELinux is put on "permissive". Most apps like Trebuchet seem to mess up with it on "enforcing" in my experience
EDIT: Root does work. Have to disable it in DEV settings, reenable and reboot
Thanks for this rom. Upgraded from 10.1 without data wipe. No any bugs found yet
Sent from my C6603 using xda premium
New Build Up
Linked : SuperSU 1.51 Working 4.3 no more broken root access
Added AutoCompletion Config
Build Date and Number are now in English
Update with Latest 10.2 CM For Yuga
Cheers have fun you can donate me if a beer for some sleepless nights of building if you love it
<< Donate To Me
do sure to report bugs so I can either look at it or get it fixed to the developers
xZain69 said:
New Build Up
Linked : SuperSU 1.51 Working 4.3 no more broken root access
Added AutoCompletion Config
Build Date and Number are now in English
Update with Latest 10.2 CM For Yuga
Cheers have fun you can donate me if a beer for some sleepless nights of building if you love it
<< Donate To Me
do sure to report bugs so I can either look at it or get it fixed to the developers
Click to expand...
Click to collapse
upgraded from 07/08, it delete play market
Solved: install GAPPS from recovery agein, then restore Google Play MArket and Google Services Framework from TB (restore data only)
Alright Just reflash gapps everything should be fine then tested over here
updated a new version of gapps thanks Kali-
link on main page
Updated With 09/08 Build..
Bugs Fixed
xZain69 said:
Updated With 09/08 Build..
Bugs Fixed
Click to expand...
Click to collapse
you're so quick man:good:
yes Bro cause I set alarm and set my laptop to build go back to sleep once baked test for an hour plus and then post here
if you like you can always buy me a beer aka donate any amount I would be grateful
UPDATED NEW BUILD 10/08 :good:
ENJOY :victory: BEER PLOX SOMEONE IM A DRUNKARD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
[COLOR="Red"]* Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
The “L” is for Lollipop
some words of wisdom:
1- This is an Android 5.0.1 Lollipop-based release - update your third party addons to ensure compatibility
2- The CM backupscript.sh in recovery will ignore and remove incompatible applications from your system partition (these are usually non-CM apps that users have opted to install). You must install a compatible app (or app pack) to regain that functionality
3- You can flash CM12 nightlies directly from CM11 M12 or CM 11 nightlies (no need to wipe), provided you read and followed items 1 and 2
ALLERT:
4- Once one CM12 nightlies, you cannot downgrade back to CM11 – if you are thinking of just exploring the release, then take a backup of your existing installation if you want to go back to it.
5- You’ll need an L compatible recovery
Happy Flashing, [/QUOTE]
Latest features :
Adaptative Brightness : Increase brightness faster if ambient light is brightening quickly √
Ambiant Display (with both hand wave and Pocket mode) X ==> This feature has been removed (buggy), Use AcDisplay instead (See FAQ) √
Themes : Multiwallpaper support √
Quick Settings : added Sync tile √
LiveDisplay : Optimize screen based on time of day and ambiant conditions to improve readability and reduce eyestrain √
....
XDA:DevDB Information
CyanogenMod 12.1 For Falcon, ROM for the Moto G
Contributors
matmutant, luca020400, Yuuki Mikan, Ethan Chen, AOSP, Google, CyanogenMod
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CyanogenMod 11, Lollipop Rom based
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-11-30
Addons:
Google Apps:
STOCK GApps
Paranoid Android Google Apps
TK Gapps [Up-to-Date]
Paranoid Android Google Apps [Out-Dated]
Base Gapps for 5.1
Full, Minimal, Lite, etc... Gapps for 5.1
Extract files from .dat (lollipop roms):
XDA thread Link
TWRP:
Thread Link
Latest Official TWRP 2.8.6.0
News and Updates!
CHANGELOG:
For Complete changelog, refer to : http://www.cmxlog.com/12.1/falcon/
HOW TO : Download, Install, Update, Enjoy!
LINKs:
All Downloads
UPDATED AT: 29/05/2015 Still Nightly!
REMEMBER:
Better use TWRP 2.8.6.0/2.8.7.0
HOW TO INSTALL
Requirements: Unlocked Bootloader, a Lollipop compatible Custom Recovery and the Downloaded Zips.
Place the rom and other like Gapps on the internal Storage or on a USB OTG
Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
Select the Zips
Swipe to install (if using TWRP)
Reboot and wait 2-3 min
Pro-TIP : To avoid GPS locking issue, refer to #Q7 of the CM12 dedicated FAQ
HOW TO DIRTY UPDATE
Download the rom zip using CM Updater or third party apps like CM downloader, CyanDelta...
Press update.
Wait 2-3 min
HOW TO CLEAN UPDATE : this kind of update helps to avoid any update related issues
ProTip : Read the Changelog and disable features that have been updated between your build and the latest build (this is important when Theme features are updated and it could break things, same for Ambient Display which is a "new" feature)
Download the rom zip on the CM Website or using CM Updater or third party apps like CM downloader, CyanDelta... make sure you have gapps zip on your device
Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA!
Select the Zips
Swipe to install
Reboot and wait 2-3 min
PLEASE USE THIS FAQ THREAD:
FAQ
Known BUGS:
Common to all variants:
Random Black screen with Ambiant display when getting notifications (extremely rare, and i was never able to reproduce it intentionally, but it happened twice on my device)
GPS issue : the GPS may not be able to lock position after Install, to fix, simply take the time to read #Q7 of the FAQ
XT1032:
XT1033 :
XT1031/28:
Native SMS/MMS is broken. Send button is disabled on the native app but Hangouts or another third party app works eg Textra, 8sms etc...
Before reporting any issue, read FAQ in case an issue appeared and already has a workaround or a temporary fix.
BUGTracker: JIRA
From The Official CyanogenMod JIRA Page, click the Down Arrow on the Issues menu, click Search for issues, and enter your search terms for the bug or issue you are interested in finding. Be sure Status is set to all to see if your issue has been fixed already. If you do find an unresolved existing bug report, you can click the vote link on the right of the issue to show your support for having this bug fixed.
If you do not have a solution or further technical details to provide not already covered, there is no need to make a comment.
In the next build:
On CM12.1
Any news for dual sim/or cdma variant??
Sent from my XT1033 using XDA Free mobile app
1033 dual sim working?
is dual sim working on 1033 ?
mmxandy said:
is dual sim working on 1033 ?
Click to expand...
Click to collapse
I only have a XT1032 so I can't test but I think you should wait for a solution just like on CM11
If you are Brave... Try It, but I'm not responsible!
FOR ALL VARIANTS JUST WAIT!
Damn, that was fast!
Gonna test it when i get home from work.
XT1033 report.
dhruv7855 said:
Any news for dual sim/or cdma variant??
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
mmxandy said:
is dual sim working on 1033 ?
Click to expand...
Click to collapse
Yuuki Mikan said:
I only have a XT1032 so I can't test but I think you should wait for a solution just like on CM11
If you are Brave... Try It, but I'm not responsible!
FOR ALL VARIANTS JUST WAIT!
Click to expand...
Click to collapse
Just tested on XT1033, Sim cards are not detected & no network at all..
Waiting for Dual Sim support..
So I have to fix titan
The only missing moto device
Anyone tried to flash this on Stock GPE 5.0.1 bootloader?
so i assume @Yuuki Mikan is the mian dev here? or just the thread maintainer?
Here we go....the best news of January ....cm rocks....
Sent from my XT1033 using XDA Free mobile app
GPE Converted XT1033
Does the ROM work on GPE converted XT1033?
both sim symbols showing in 1033, but no network...
As CM 12 is here..is there any compatible recovery for moto g gpe 5.0.1 devices so that we can flash ROM,s.. (converted xt 1033 to moto g gpe lollipop)
what recovery for install CM 12. I have TWRP version 2.8.1. can I use that?
Does anyone have root ? Flashed latest su zip, once booted, I opened su app, it says no binary ?
Edit: sorry, my bad, not latest su zip.
I got bootloop, which recovery do you use to flash? (XT1032)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Android Open Source Project
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
"Anyway to get a working system I added some changes from CodeAurora Forum and CyanogenMod. I added also 3 non-AOSP features for a better user experience (Advanced Reboot, "Clear All" button in Recents and an option to delete screenshots from notification) and I'm NOT going to add something other." - @Alberto97
NOTE: THE KERNEL INCLUDED WITHIN THE ROM PACKAGE DOESN'T WORK. YOU WILL HAVE TO FLASH THE AOSP-FIX.ZIP
Instructions:
1. Flash the ROM zip
2. Flash AOSP-FIX.zip
I have a feeling this will result in no WiFi. If WiFi doesn't work, flash Boeffla kernel, then flash the AOSP-FIX.zip file. If you want Boeffla kernel, flash the AnyKernel package as the official package won't work!
I do not suggest you flash gapps at first boot. If it works for you, well and good (let me know lol).
Downloads:
ROM (Includes the AOSP-FIX.zip)
Boeffla Anykernel (In case you ever need it )
Bugs:
Bluetooth is messed up
CAN'T FIND RECENTS! UGH
Thanks to:
@mcgi5sr2
@Alberto97
Google (Android)
CyanogenMod
Anyone left out, feel free to contact me
Sources:
ROM- https://github.com/F-AOSP
Kernel- https://github.com/mcgi5sr2/kernel_samsung_smdk4412
Trees- https://github.com/Alectradar/aosp_device_samsung_i9300
XDA:DevDB Information
AOSP for the i9300, ROM for the Samsung Galaxy S III I9300
Contributors
Gokulbalram, mcgi5sr2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-04-13
Last Updated 2015-09-13
Reserved
Good job bro
rap_turkez said:
Good job bro
Click to expand...
Click to collapse
Thanks dude
Sent from my SM-T531
Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to @Gokulbalram @rap_turkez for builds roms for our s3 !! :victory:
Scorpionea said:
Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to Gokulbalramrap_turkez for builds roms for our s3 !! :victory:
Click to expand...
Click to collapse
I had kept a limit on how many ROMs I will maintain, I kept it at an initial 4, but then when I saw that it'd be possible to get AOSP, I had to break that barrier and make it 5. I'm an official maintainer for 2 ROMs, so even they are on the way!
Anyway, 'nuff said. Enjoy/
Scorpionea said:
Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to @Gokulbalram @rap_turkez for builds roms for our s3 !! :victory:
Click to expand...
Click to collapse
No prob about it, i hqve a lot of free time, And all my roms are constantly updated
Sorry for noobie question but what's the difference between this rom and other cm roms ? Better performance ?
Sent from my GT-I9300 using XDA Free mobile app
Great, as always
Egli.Kasa said:
Sorry for noobie question but what's the difference between this rom and other cm roms ? Better performance ?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
This is Pure AOSP with a little modifications. You'll have to test to know the difference!
Sent from my SM-T531
*Testing*
What have I done:
-Wipe data/factory reset
-Wipe dalvik cache
-Format /sdcard
-Flash ROM
-Flash fix
-Flash Gapps
The ROM boots, no Gapps problem, but wifi doesn't work. During the startup configuration appeared a bluetooth crash error, just once. While in options bluetooth crashed again (not spamming the error). No recents panel.
The ROM it's very fast and reactive, good work :good:
TENN3R said:
What have I done:
-Wipe data/factory reset
-Wipe dalvik cache
-Format /sdcard
-Flash ROM
-Flash fix
-Flash Gapps
The ROM boots, no Gapps problem, but wifi doesn't work. During the startup configuration appeared a bluetooth crash error, just once. While in options bluetooth crashed again (not spamming the error). No recents panel.
The ROM it's very fast and reactive, good work :good:
Click to expand...
Click to collapse
Just read the first page, you have to flash boeffla kernel (AnyKernel version) to get wifi working :good:
nosphor said:
Just read the first page, you have to flash boeffla kernel (AnyKernel version) to get wifi working :good:
Click to expand...
Click to collapse
But why is there no Recents Panel?
Sent from my GT-I9300 using xda Forum
The Marionette said:
But why is there no Recents Panel?
Sent from my GT-I9300 using xda Forum
Click to expand...
Click to collapse
As you know, AOSP devices have no buttons hence button functionality is messed up. I'll have to find commits for this now!
Sent from my SM-T531
Wow awesome job dude. Looking forward to a stable version. Thanks for making another Lollipop Rom for our S3
I can't get Wi-Fi working with using AnyKernel method. I must mention that I flashed this ROM while being on 4.1.2 firmware, it could made some issues? Flash 4.3 stock then this rom?
@War3st: you need a modem (baseband) MG4 or higher, otherwise you'll loose your IMEI. If you've an older modem, let it update by OTA or KIES - simple flash with Odin messes your IMEI up, too.
I've already had MG4 modem. Wi-Fi doesn't works anyway. I need to flash ROM > AOSP_Fix > Boeffla Kernel or ROM > Kernel > fix?
Gokulbalram said:
I had kept a limit on how many ROMs I will maintain, I kept it at an initial 4, but then when I saw that it'd be possible to get AOSP, I had to break that barrier and make it 5. I'm an official maintainer for 2 ROMs, so even they are on the way!
Anyway, 'nuff said. Enjoy/
Click to expand...
Click to collapse
what roms are you officially maintaining? /OT
War3st said:
I've already had MG4 modem. Wi-Fi doesn't works anyway. I need to flash ROM > AOSP_Fix > Boeffla Kernel or ROM > Kernel > fix?
Click to expand...
Click to collapse
ROM >> Boeffla >> Fix :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
temasek's UNOFFICIAL CM 13 BUILDS
OFFICIAL ROM MAINTAINER THREAD
This is the official maintainer thread for all current and future unofficial builds of CM-13.0; source-worked by @temasek, built to Galaxy S4 LTE-A(ks01lte) by @arter97. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Download Links and Changelog
FAQ and Trouble Shooting
The lastest version of PhilZ Touch recovery is recommended.
http://www.arter97.com/browse/S4/recovery
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
8.1. If you're an i9506 user, flash the fix file from here : http://www.arter97.com/browse/S4/etc/i9506_patch
9. Install arter97 kernel from here : http://www.arter97.com/browse/S4/kernel/AOSP_M
10. WIPE DALVIK/CACHE (for good measure).
11. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
More:
@arter97
@temasek
Please consider donating! http://forum.xda-developers.com/donatetome.php?u=4898097
XDA:DevDB Information
♦ [ROM][ks01lte][6.0] Temasek's UNOFFICIAL CyanogenMod 13 ♦, ROM for the Samsung Galaxy S 4
Contributors
arter97, temasek
Source Code: https://github.com/temasek
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: arter97 kernel for Android 6.0
Based On: CyanogenMod 13
Version Information
Status: Beta
Created 2015-04-14
Last Updated 2016-01-07
Main Download (arter97.com) [Click here]
Mirror Download (XDA DevDB) [Click here] (No longer used)
OpenGApps [Click here]
Build Version: V6.9
For the most up to date changelog please visit:
Temasek’s CM-13.0 Github Commits
MY SD Card Isn't Working
- Format the SD Card in recovery to Ext4 (from FAT) and it should be good to go. Besides, who likes the 3.9GB file limit of FAT anyways
- NTFS formatting also works, but SD card is no longer detectable in recovery.
Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).
Work In Progress. Will be updated as comments are added.
If you are experiencing any issues and have performed a dirty flash, please try a clean flash prior to posting your question. Thank you!
If you have an issue and want require help, please submit a kmsg log with the following information:
Note: Do not pull out battery or else no log; this log can be located at: /proc/last_kmsg
When Possible, Please Include:
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel version/Build, etc.).
Please read all of the OP before you post. Do not report issues on previous builds only on the latest.
Reserved 3
Reserved 4
Reserved 5
I encounter a smoothness-issue with one specific animation. If you enter Settings and e.g. WLAN - and THEN press the back-button - that animation is not smooth somehow. Can you check that? Everything else is very smooth with V. 9.7 and Kernel 5.2. Thanks for this!
Tried dirty flash over Temasek 9.6 and kernel 5.2, got system UI FC over and over again, not allowing boot to proceed.
Next I wiped device, installed rom, kernel and supersu. Booted device, after successful boot I flashed PA GAPPS, now there is no problem. Great work as always Arter.
Flashing 5.3 kernel now, will observe smart watch performance.
Also I'm on Philz recovery.
Sent from my SHV-E330S using XDA Free mobile app
ROM Firmware Required: arter97 kernel for Android 5.1 Touchwiz Lollipop?
I think you mean 5.1 aosp lollipop
Anyway downloading now and I will give it a try
fattymcdirty said:
I encounter a smoothness-issue with one specific animation. If you enter Settings and e.g. WLAN - and THEN press the back-button - that animation is not smooth somehow. Can you check that? Everything else is very smooth with V. 9.7 and Kernel 5.2. Thanks for this!
Click to expand...
Click to collapse
I got the same.
If I got to settings and press back, then animation is smooth.
But if I got to settings and one level deeper (any level or sub menu), and press back then first animation is not smooth, but second is smooth as before.
Everything works for me except video recording and playback.
Playback is particularly annoying. I have had this problem with 5.0.1 as well.
Please help!
Ryno101 said:
Everything works for me except video recording and playback.
Playback is particularly annoying. I have had this problem with 5.0.1 as well.
Please help!
Click to expand...
Click to collapse
Do you use stock app?
It works for med, but you could try another app.
Working great!
Only problems with Light Flow,but that`s not so important.
Kernel 5.3 and ROM v9.7 works like a charm for me.
Thank you so much for a really great ROM.
503 Service Temporarily Unavailable
nginx/1.4.6 (Ubuntu)
This happends to me when Im trying to download kernel and patch!
og2345 said:
503 Service Temporarily Unavailable
nginx/1.4.6 (Ubuntu)
This happends to me when Im trying to download kernel and patch!
Click to expand...
Click to collapse
Just try again
---------- Post added at 08:40 PM ---------- Previous post was at 08:40 PM ----------
Again, incredible @arter97
Infra port malfunction
Hi there! The rom works like charm! But! But the infra port doesn't work. Can anyone confirm it?
squarepusher80 said:
Hi there! The rom works like charm! But! But the infra port doesn't work. Can anyone confirm it?
Click to expand...
Click to collapse
Confirmed, since 5.0 kernel update.
ROM v8.8 and 4.0.2 kernel was the last time i could use the IR... :crying: (GET THAT BACK PLEASE)
wkwk said:
Tried dirty flash over Temasek 9.6 and kernel 5.2, got system UI FC over and over again, not allowing boot to proceed.
Next I wiped device, installed rom, kernel and supersu. Booted device, after successful boot I flashed PA GAPPS, now there is no problem. Great work as always Arter.
Flashing 5.3 kernel now, will observe smart watch performance.
Also I'm on Philz recovery.
Sent from my SHV-E330S using XDA Free mobile app
Click to expand...
Click to collapse
Very interested in smart watch performance, thanks.
Franvmm said:
Confirmed, since 5.0 kernel update.
ROM v8.8 and 4.0.2 kernel was the last time i could use the IR... :crying: (GET THAT BACK PLEASE)
Click to expand...
Click to collapse
+1
I can't use all function of my Yamaha home theater without ZappIR :crying:
TO ADD:
[ ] Updated Lineage13.0
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
1 - Make sure you run latest TWRP
2 - Download the desired ROM
3 - Download GAPPS of your preference
4 - Place in the card
5 - Reboot to recovery
6 - Make backup of Nandroid
7 - Wipe Data/Factory Reset
8 - Install the ROM
9 - Install GAPPS
10 - Reboot
11 - Enjoy !
LineageOS11.0 Release 6 - LineageOS11.0 R6 - lineage-11-20170719-UNOFFICIAL-falconss.zi
LineageOS14.1 Release 1 - LineageOS14.1 R1 - lineage-14.1-20170626-UNOFFICIAL-shuang.zip
LineageOS11.0 Release 6 - LineageOS11.0 R6:
Code:
- Camera
LineageOS14.1 Release 1 - LineageOS14.1 R1:
Code:
- Device Set Model
- Taking Photos and Videos
- Boot could do a random reboot
LineageOS11.0 Release 6:
Code:
- Update Security Patchs
- Rebased kernel, now it's on 3.4.113
- Fixed Headset bug
- Fixed Blue screen ficking
- Fixed Super Battery Drain (it shutdown before the battery reach the 0%)
LineageOS14.1 Release 1:
Code:
- Initial Release
- Include many Eleven fixes (Fix Save/Restore configs: [URL]https://review.lineageos.org/#/c/172006/[/URL]; Fix Artwork bug: [URL]https://review.lineageos.org/#/c/174458/[/URL])
- Include init optimization: [URL]https://review.lineageos.org/#/c/175189/[/URL]
- Include "network-traffic" topic of LineageOS: [URL]https://review.lineageos.org/#/q/network-traffic[/URL]
@tetsuo55 | @AdrianDC | @daedroza | @Kizoky | @xezrunner | @Zsenyka | @tekXS | @mikeNG | #LineageOS | #Google | #Sony | #Qualcomm
XDA:DevDB Information
[ROMs][ALL][DEV] Mega thread of Lineage ROMs, ROM for the Sony Xperia E1
Contributors
Caio99BR, tetsuo55, AdrianDC, daedroza
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Testing
Created 2017-06-08
Last Updated 2017-07-20
About LineageOS 14.1
Flashing Successfuly...
Booting Successfuly with kernel v.r3r5...
Smooth and Awesome
Then after flashing Gapps Arm 7.1 pico .. Not booting
But if Flashed Gapps with the ROM after then booting but heavy lag on Welcome Settings..
Then I flashed CM12.1 with cleaning dalvik cache,internal S,and etc ..then now phone lagging (is that Ram mangment problem left with LAgeOS 14.1) never happened like this before... Same for other ROMs some times phone restarts because processor overheating now I'm in trouble Big Thank and Hug For Your Work
[email protected] said:
About LineageOS 14.1
Flashing Successfuly...
Booting Successfuly with kernel v.r3r5...
Smooth and Awesome
Then after flashing Gapps Arm 7.1 pico .. Not booting
But if Flashed Gapps with the ROM after then booting but heavy lag on Welcome Settings..
Then I flashed CM12.1 with cleaning dalvik cache,internal S,and etc ..then now phone lagging (is that Ram mangment problem left with LAgeOS 14.1) never happened like this before... Same for other ROMs some times phone restarts because processor overheating now I'm in trouble Big Thank and Hug For Your Work
Click to expand...
Click to collapse
only LineageOS 11 is stable somewhat, other releases are still buggy and slow
Yes.. But In CM12.1 now shows Kernel Version as
3.4.0-LineageOS
[email protected] #2
Is that kernel left from Lineage 14.1
how to change it ? (tried too many times flashing another versions of the same kernel )
[email protected] said:
About LineageOS 14.1
Flashing Successfuly...
Booting Successfuly with kernel v.r3r5...
Smooth and Awesome
Then after flashing Gapps Arm 7.1 pico .. Not booting
But if Flashed Gapps with the ROM after then booting but heavy lag on Welcome Settings..
Then I flashed CM12.1 with cleaning dalvik cache,internal S,and etc ..then now phone lagging (is that Ram mangment problem left with LAgeOS 14.1) never happened like this before... Same for other ROMs some times phone restarts because processor overheating now I'm in trouble Big Thank and Hug For Your Work
Click to expand...
Click to collapse
Wait wait, cm-12.1 is deprecated, do not talk about it here, right?
I only will, when possible, do build of lineage 11, 13 and 14.1.
Ps1: Only KitKat and old ROMs supports flashing gapps after first boot, in Lollipop and newers you need to flash ROM then gapps.
Ps2: Lineage14.1 is not ready, I'm doing many crazy changes to camera.
Ps3: I rebased Lineage11 kernel and it is now at kernel version 3.4.113.
Ps4: cm-12.1 = windows vista, no one should use.
Ps5: cm-13.0 kernel will be rebased in top of an updated kernel version 3.4.113.
Ps6: cm-11.0 and cm-13.0 need some cherry-picks of cm-14.1.
Ps7: I backported camera driver of new current cm-11.0 kernel to KK (reverted new changes), reported many minor bugs in DualBootPatcher, waited, tested on stock, tried to fix camera on cm-11.0 (without sucess) and now my data is probably corrupted.
Ps8: I want to smash this device :highfive:
Ps9: If someone really want to help me with builds, contact me on PM/e-mail or send a message in Telegram.
Ps10: See my Contribution Activity on Github, if you don't trust on me
That's all, now is time to sleep,
Hey bro... Can i use this rom for Xperia E1 dual d2105
---------- Post added at 03:21 AM ---------- Previous post was at 03:06 AM ----------
Can i install this Rom via CWM
Caio99BR said:
Ps4: cm-12.1 = windows vista, no one should use.
Click to expand...
Click to collapse
That's an over-exaggeration, CM12.1 is actually much more stable/faster than CM13.0 or 14.1, don't know about CM11, but CM12.1 is definitely comparable to at least the stock ROM's performance. (that is, of course, if you're talking stability, if you're talking code and support, yes)
xezrunner said:
That's an over-exaggeration, CM12.1 is actually much more stable/faster than CM13.0 or 14.1, don't know about CM11, but CM12.1 is definitely comparable to at least the stock ROM's performance. (that is, of course, if you're talking stability, if you're talking code and support, yes)
Click to expand...
Click to collapse
CM13 was released shortly after, so many devices was shipped with CM13 and not with CM12.1, that's where the Vista syndrome comes, no one uses it because CM13 is way better
Hey where is download link of Lineage 13
Sent from my D2105 using XDA Free mobile app
Wait sometimes I'm going to test it...
Sent from my D2105 using XDA Free mobile app
G.Pawar said:
Hey where is download link of Lineage 13
Click to expand...
Click to collapse
Read the very top few rows of OP.
Can somebody tell me, is it worth to upgrade from CM11 to Lineage 14.1? How stable it is?
Zsenyka said:
Can somebody tell me, is it worth to upgrade from CM11 to Lineage 14.1? How stable it is?
Click to expand...
Click to collapse
LineageOS 14.1 is very slow in the setup wizard.
I had to go back to the previous version because it always crashed and I could not get out of the setup wizard.
Ghost005 said:
LineageOS 14.1 is very slow in the setup wizard.
I had to go back to the previous version because it always crashed and I could not get out of the setup wizard.
Click to expand...
Click to collapse
Hey which privious version you installed..
Sent from my D2105 using XDA Free mobile app
Bro why this ROM hang..it's slow ...anyway to increase it's performance speed
Sent from my shuang using XDA Free mobile app
@Caio99BR https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-stock-camera-nougat-roms-t3628791 Can this be useful for making camera work?
Zsenyka said:
@Caio99BR https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-stock-camera-nougat-roms-t3628791 Can this be useful for making camera work?
Click to expand...
Click to collapse
No, because it isn't the fault in the app, but rather in the hacky-wacky framework camera which refuses to work with custom ROM other than the Stock and crappy KK/JB ROM
The clock on lock screen have cutted off date. Is there fix for this?
Yeah right fix this lockscreen clock... In cm11 rom
Sent from my D2105 using XDA Free mobile app
G.Pawar said:
Yeah right fix this lockscreen clock... In cm11 rom
Sent from my D2105 using XDA Free mobile app
Click to expand...
Click to collapse
You can replace cLock with "stock" clock. They look the same .