Hello, is there a way to flash a kernel with loop device support on the XT1095?
I've been googling and searching on this forum but can't find. Maybe my english for search is not the best?
Thank you.
demencia89 said:
Hello, is there a way to flash a kernel with loop device support on the XT1095?
I've been googling and searching on this forum but can't find. Maybe my english for search is not the best?
Thank you.
Click to expand...
Click to collapse
Loop device support already works, no need to do anything special.
Sent from my XT1095 using Tapatalk
AGISCI said:
Loop device support already works, no need to do anything special.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hey, ty for replying. I tried Loop device check app and it says my device doesn't support it. I'm on official 6.0 on an XT1095.
Is there another way to check if my device supports it?
demencia89 said:
Hey, ty for replying. I tried Loop device check app and it says my device doesn't support it. I'm on official 6.0 on an XT1095.
Is there another way to check if my device supports it?
Click to expand...
Click to collapse
It does. I know it does, I use the loop device to mount and run a linux image on my phone.
Sent from my XT1095 using Tapatalk
AGISCI said:
It does. I know it does, I use the loop device to mount and run a linux image on my phone.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
That's exactly what I was behind
Thanks a lot, I'll give it a try then.
Mind sharing what linux have you tried on the phone and how did it go?
demencia89 said:
That's exactly what I was behind
Thanks a lot, I'll give it a try then.
Mind sharing what linux have you tried on the phone and how did it go?
Click to expand...
Click to collapse
I have used debian a while back, currently I have arch linux on it. It went very well, I use VNC and SSH to connect to it, everything works great, I installed mate as my DE.
Sent from my XT1095 using Tapatalk
AGISCI said:
I have used debian a while back, currently I have arch linux on it. It went very well, I use VNC and SSH to connect to it, everything works great, I installed mate as my DE.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I'm getting force close on the complete linux installer app. What app or steps are you using to mount the linux image on your phone?
demencia89 said:
I'm getting force close on the complete linux installer app. What app or steps are you using to mount the linux image on your phone?
Click to expand...
Click to collapse
Complete linux installer has never worked for me on any of my phones.
However the app linux deploy works perfectly on my moto x 2014, moto x 2013 and my moto razr i.
Sent from my XT1095 using Tapatalk
AGISCI said:
Complete linux installer has never worked for me on any of my phones.
However the app linux deploy works perfectly on my moto x 2014, moto x 2013 and my moto razr i.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Estoy usando ese ahora mismo para instalar Arch. Gracias por todo.
Saludos!
I'm having trouble to get the ssh and vnc services up. Did you come up with this problem too? I've found others having the same problem but no solution. Theres a solution that says I should reconfigure ENV on Linux Deploy settings but it didn't work.. I'm trying to set up Arch by the way.
demencia89 said:
I'm having trouble to get the ssh and vnc services up. Did you come up with this problem too? I've found others having the same problem but no solution. Theres a solution that says I should reconfigure ENV on Linux Deploy settings but it didn't work.. I'm trying to set up Arch by the way.
Click to expand...
Click to collapse
I have no problems with them. Do they not start? Is there an error message? Before you installed did you select vnc and ssh in components to be installed?
Sent from my XT1095 using Tapatalk
Related
Hello, just would like to know if there is coming any root guide for at&t version for jellybean ? I could not find a proper answer, is this version rootable yet ? Thanks
Sent from my MB886 using XDA Premium HD app
gembo said:
Hello, just would like to know if there is coming any root guide for at&t version for jellybean ? I could not find a proper answer, is this version rootable yet ? Thanks
Sent from my MB886 using XDA Premium HD app
Click to expand...
Click to collapse
You should have done a quick search first, or looked at the home page...
This is the link to the Jelly Bean (4.1.1/4.1.2) Root Method
Althought djrbliss never mentioned it was for AT&T's 4.1.1, it was assumed as it was Jelly Bean.
Just use an Ubuntu Live CD/USB, Boot/Virtual Box into it, and get the android-tools, and any other required packages...
So you obviously look that hard man.
sent from my JokerMATRIX HD MAXX
Some people are unconsiously oblivious...
Others just have a harder time comprehending the descriptions for the Guides here...
Then again, there are those who just skip that part anyways...
Byakko Custom said:
You should have done a quick search first, or looked at the home page...
This is the link to the Jelly Bean (4.1.1/4.1.2) Root Method
Althought djrbliss never mentioned it was for AT&T's 4.1.1, it was assumed as it was Jelly Bean.
Just use an Ubuntu Live CD/USB, Boot/Virtual Box into it, and get the android-tools, and any other required packages...
Click to expand...
Click to collapse
but the problem is that i dont understand properly that ubuntu instalation or via ubuntu, sorry i saw that thread but wasnt shure, i thought there may be another method tru windows...
gembo said:
but the problem is that i dont understand properly that ubuntu instalation or via ubuntu, sorry i saw that thread but wasnt shure, i thought there may be another method tru windows...
Click to expand...
Click to collapse
If you have any spare USB Drives, there are easy windows programs to easily make a bootable USB... If needed, I could put up screenshots showing (visually) what to do to make the bootable drive and how to root.
Sent from my AT&T Atrix HD using xda app-developers app
Thats the only method man. That's how it works.
sent from my JokerMATRIX HD MAXX
Byakko Custom said:
If you have any spare USB Drives, there are easy windows programs to easily make a bootable USB... If needed, I could put up screenshots showing (visually) what to do to make the bootable drive and how to root.
Sent from my AT&T Atrix HD using xda app-developers app
Click to expand...
Click to collapse
ill tryed it with live cd but got error in terminal when adding some commands such as E: was unable etc... i am trying to install it on another hdd and let you know, thanks
EDIT: just installed it! lock
gembo said:
ill tryed it with live cd but got error in terminal when adding some commands such as E: was unable etc... i am trying to install it on another hdd and let you know, thanks
EDIT: just installed it! lock
Click to expand...
Click to collapse
You have to use Ubuntu 12.04 LTS. I was using Ubuntu 12.10 and I had the same problem.
Hi Guys,
Do any of the original root methods work on the UK version? Couldn't find any threads about it?
Guitarfreak26 said:
Hi Guys,
Do any of the original root methods work on the UK version? Couldn't find any threads about it?
Click to expand...
Click to collapse
Did u tried moto x toolkit?
Sent From Moto X
Guitarfreak26 said:
Hi Guys,
Do any of the original root methods work on the UK version? Couldn't find any threads about it?
Click to expand...
Click to collapse
Unlock bootloader, flash twrp and finally install superuser, rooting any moto with a unlocked boot loader is exactly the same regardless variant number, except Verizon and AT&t retail version
Sent on my Gummy running Lenoto X
santana3 said:
Did u tried moto x toolkit?
Sent From Moto X
Click to expand...
Click to collapse
No ill give that a go now, ill let everyone know the results Im sure there will be more uk people here soon
I've still not managed to root the European model. All of the posted recoverys report incorrect model number
Sent from my SM-N9005 using Tapatalk
Guitarfreak26 said:
I've still not managed to root the European model. All of the posted recoverys report incorrect model number
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Try dhacker's recovery and see if it works, these are new both twrp and cwm, let us know if it works http://androidhosting.org/Devs/Dhacker29/MotoX/
Sent on my Lenoto A2109 tablet
flashallthetime said:
Try dhacker's recovery and see if it works, these are new both twrp and cwm, let us know if it works http://androidhosting.org/Devs/Dhacker29/MotoX/
Sent on my Lenoto A2109 tablet
Click to expand...
Click to collapse
Still says variable not supported.. Looks as though it flashes it but it wont boot into recovery just boots normally
Guitarfreak26 said:
Still says variable not supported.. Looks as though it flashes it but it wont boot into recovery just boots normally
Click to expand...
Click to collapse
Did you boot to the system right after you flashed it? If you did reflash recovery and boot to recovery otherwise it will not stick
Sent on my Lenoto A2109 tablet
I pressed reboot recovery but it just gives the warning bootloader splash screen then boots as normal..
I'm really missing root haha
Sent from my XT1052 using Tapatalk
OH MY GOD... I feel like an idiot
I was pressing power button to select, it was volume up.... Lol the recovery you posted above is working fine...
Guitarfreak26 said:
OH MY GOD... I feel like an idiot
I was pressing power button to select, it was volume up.... Lol the recovery you posted above is working fine...
Click to expand...
Click to collapse
I'll make you feel better, you aren't the only one that has done it, glad it worked . Which recovery worked?
Sent on my Lenoto A2109 tablet
flashallthetime said:
I'll make you feel better, you aren't the only one that has done it, glad it worked . Which recovery worked?
Sent on my Lenoto A2109 tablet
Click to expand...
Click to collapse
I flashed twrp2.3.6.img but i presume his cwm works too
Guitarfreak26 said:
I flashed twrp2.3.6.img but i presume his cwm works too
Click to expand...
Click to collapse
OK so all other recoveries borked except the new link I gave you? Have you flashed superuser or did it ask if you want to root.?
Sent on my Lenoto A2109 tablet
Yeah the others i tried wouldnt flash correctly, it asked if i wanted to root. But then i had to open supersu installer, then reboot to twrp again
Everything works fine !
Guitarfreak26 said:
Hi Guys,
Do any of the original root methods work on the UK version? Couldn't find any threads about it?
Click to expand...
Click to collapse
Yes, i have just unlocked and rooted a UK phone with 4.4.2.
Done under 15mins
Today the notification for the official update to 5.1 apear on my Moto X. Last week i rooted the phone just to block ads. The update started the installation but it fail. I tried 3 times, and all was the same.
What can i do? I want to have the new version of Android.
Thanks
Nortenodelsur said:
Today the notification for the official update to 5.1 apear on my Moto X. Last week i rooted the phone just to block ads. The update started the installation but it fail. I tried 3 times, and all was the same.
What can i do? I want to have the new version of Android.
Thanks
Click to expand...
Click to collapse
You have to unroot.
Sent from my XT1095
AGISCI said:
You have to unroot.
Sent from my XT1095
Click to expand...
Click to collapse
That is really hard
Thanks for the help!
If you are gonna use OTA update, your system must be unmodified : not rooted, not changing any system file (including boot logo), and using stock recovery.
Sent from my XT1095 using Tapatalk
bimasakti85 said:
If you are gonna use OTA update, your system must be unmodified : not rooted, not changing any system file (including boot logo), and using stock recovery.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Did you know a good tutorial to do that? I cant find one that works
Thanks
Nortenodelsur said:
Did you know a good tutorial to do that? I cant find one that works
Thanks
Click to expand...
Click to collapse
Just flash your full firmware again.
Sent from my XT1095
Nortenodelsur said:
Did you know a good tutorial to do that? I cant find one that works
Thanks
Click to expand...
Click to collapse
Flash the 5.0 stock firmware. You can use the one from graffixNYC...
Sent from my XT1095 using Tapatalk
I have created a stock rom of 5.1 lollipop that you can flash via custom recovery. The only modifications that I have made are to remove the motrola OTA service, that way there will be no bricks from people taking an OTA and it won't bother anyone about OTA update messages. The recovery flasher was removed to prevent it from overwriting the custom recovery.
I have uploaded a new version which has the stagefright patch(23.16.6). The old version is also still available as well.
Installation:
1) If you are coming from another rom, or a different version of android you must do a factory reset.
2) Install the zip file through TWRP/CWM/etc.
3) Enjoy.
Download 5.1 23.16.6
Download 5.1 23.16.3
AGISCI said:
I have created a stock rom of 5.1 lollipop that you can flash via custom recovery. The only modifications that I have made are to remove the motrola OTA service, that way there will be no bricks from people taking an OTA and it won't bother anyone about OTA update messages. The recovery flasher was removed to prevent it from overwriting the custom recovery.
Installation:
1) If you are coming from another rom, or a different version of android you must do a factory reset.
2) Install the zip file through TWRP/CWM/etc.
3) Enjoy.
Download
Click to expand...
Click to collapse
Just wanted to say awesome! Thanks and am running right now with absolutely no issues!!! Noticed it's funny little differences in the ROM, from the Brazilian version ex. Status bar, the H was huge in the Brazilian version, very small for the T-Mobile unlocked xt1095!
So I'm running rooted stock 5.0, I can just flash this and run with it?
Yes. Just remember that my rom only flashes the kernel and the systrm. Nothing else gets upgraded. So your modem, partions, and bootloader will still be the 5.0 ones.
Sent from my XT1095 using Tapatalk
Very thanks
Regards
Enviado desde mi victara usando Tapatalk 2
Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app
rohithksaj said:
Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Will work for xt1092, but I do believe there is a stock ROM 5.1 for the xt1092, might be a better fit?
rohithksaj said:
Will it work on 1092 ???
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
It should work. It only flashes the kernel and system, so your radio stays the same which means you should have signal.
Sent from my XT1095 using Tapatalk
Optimusman said:
Will work for xt1092, but I do believe there is a stock ROM 5.1 for the xt1092, might be a better fit?
Click to expand...
Click to collapse
Am sorry I see only stock for xt1097....not for 1092...
Sent from my XT1092 using XDA Free mobile app
There is one for 1092, but it's the retde not the reteu.
Sent from my XT1095 using Tapatalk
AGISCI said:
There is one for 1092, but it's the retde not the reteu.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I see I just knew it was for the xt1092 Cuz I was using it before the stock 5.1 ROM xt1095 was created, and it worked great! What's the difference between retde, and reteu? The country being used in?
Optimusman said:
I see I just knew it was for the xt1092 Cuz I was using it before the stock 5.1 ROM xt1095 was created, and it worked great! What's the difference between retde, and reteu? The country being used in?
Click to expand...
Click to collapse
The languages you can use. Not everyone speaks English.
retde should have German and Danish I believe.
Sent from my XT1095 using Tapatalk
AGISCI said:
The languages you can use. Not everyone speaks English.
retde should have German and Danish I believe.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I love when people are happy to teach and explain things! Appreciated!!!
I'm coming from an5.1.1 AOSP rom. I did a factory reset then installed the zip. Everyone installed perfectly but when I try to set up my device it says that this device has been reset and I need to verify my Google account. Once I do this it has me accept the Motorola terms and then it asks me to verify my Google account again. I cannot advance from this step. Any thoughts?
TopazUser1 said:
I'm coming from an5.1.1 AOSP rom. I did a factory reset then installed the zip. Everyone installed perfectly but when I try to set up my device it says that this device has been reset and I need to verify my Google account. Once I do this it has me accept the Motorola terms and then it asks me to verify my Google account again. I cannot advance from this step. Any thoughts?
Click to expand...
Click to collapse
Why can't you advance past it? Is there some error?
Sent from my XT1095 using Tapatalk
I'm not sure. I think it's a 5.1 security feature.
Yes it is a 5.1 security feature. Is there an error, does it freeze, does it say or do anything? Or you don't know the password, or it is someone else's account?
I need more info to know what is wrong.
Sent from my XT1095 using Tapatalk
Does this have the giant H and 4G icons?
No, this has the LTE icon instead of the big 4G one.
Sent from my XT1095 using Tapatalk
Yay !!! Ive been waiting for something like this
Will download as backup right away
Enviado desde mi XT1095 mediante Tapatalk
What devs out there are still working on root for the turbo?
Sent from my XT1254 using Tapatalk
I've found that kingroot works much more consistently if you clear cache before using it. It least we now have a temproot for sunshine if jcase ever supports the turbo.
Sent from my XT1254 using Tapatalk
cadenmiller60 said:
What devs out there are still working on root for the turbo?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Didn't get a chance to post in either shiffty thread before they were closed. Did anyone notice those screen shots shiffty put up there were 5.1 but I though "his exploit" was being worked on 4.4.4.
Maybe I missed something, but I did find that thread entertaining.
My poolman is. But not sure how successful he'll be since he's still using an LG flip phone.
Raistlen0 said:
Didn't get a chance to post in either shiffty thread before they were closed. Did anyone notice those screen shots shiffty put up there were 5.1 but I though "his exploit" was being worked on 4.4.4.
Maybe I missed something, but I did find that thread entertaining.
Click to expand...
Click to collapse
You did. He claimed to be working on 5.1.
TheSt33v said:
He claimed to be working on 5.1.
Click to expand...
Click to collapse
Yeah too bad we never saw anything tangible though. I was hoping for the best.
TheSt33v said:
You did. He claimed to be working on 5.1.
Click to expand...
Click to collapse
It is 5.1 build number SU3TL-39
Sent from my XT1254
Shiftydogit said:
It is 5.1 build number SU3TL-39
Sent from my XT1254
Click to expand...
Click to collapse
Could you post something more substantial than a root check? I can do that with kingroot.
I'm sure we're all more interested in your actual work, and progress.
Sent from my XT1254 using XDA Free mobile app
Shiftydogit said:
It is 5.1 build number SU3TL-39
Sent from my XT1254
Click to expand...
Click to collapse
i have the same version
but kingroot is just a temporary root .... just for the next restart
Qutayba Khader said:
i have the same version
but kingroot is just a temporary root .... just for the next restart
Click to expand...
Click to collapse
There's something in the firmware making it hard to keep root
Sent from my XT1254
That would be WP dude. WP is why we can perm-root our phones thru the OS and is why it disappears after a reboot (Though you can just re-root using the same KingRoot app as before.) I'm sure you know WP means we can write/install the necessary SU binaries to the system. WP is part of the "firmware" you mentioned.
Shiftydogit said:
There's something in the firmware making it hard to keep root
Sent from my XT1254
Click to expand...
Click to collapse
GreaterLesser said:
That would be WP dude. WP is why we can perm-root our phones thru the OS and is why it disappears after a reboot (Though you can just re-root using the same KingRoot app as before.) I'm sure you know WP means we can write/install the necessary SU binaries to the system. WP is part of the "firmware" you mentioned.
Click to expand...
Click to collapse
Yeah ik what it is I'm looking for ways around it as we speak not exactly the simplest of tasks and I'll let you guys know if I find anything
Sent from my XT1254
Shiftydogit said:
Yeah ik what it is I'm looking for ways around it as we speak not exactly the simplest of tasks and I'll let you guys know if I find anything
Sent from my XT1254
Click to expand...
Click to collapse
Just to put it out there - you can use a root app (after rooting your phone ofc) to set SELinux to Permissive so it doesn't keep forcing your phone to reboot. I'm testing it on my phone now. Again it will still disappear after reboot but still a temp work-around.
GreaterLesser said:
Just to put it out there - you can use a root app (after rooting your phone ofc) to set SELinux to Permissive so it doesn't keep forcing your phone to reboot. I'm testing it on my phone now. Again it will still disappear after reboot but still a temp work-around.
Click to expand...
Click to collapse
Well no temproot is going to stay and id like to see the turbo stay rooted go ahead and message me and lets see if we can't put our heads together
Sent from my XT1254
PILLMUZIK3600 said:
Dude you are a fraud. Just let it go.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
There's no question he wasn't anywhere near perm root like he initially stated (or unintentionally led people to believe-to me it doesn't matter at this point), but at least he is looking around. A lot of the devs on year old devices like ours and the note 4 have given up. I really hope he discovers something. Dmverity (which I think is still the culprit) is a tough nut to crack.
@jcase will eventually look at the issue, but apparently bootloader unlock is the most likely way around wp. To me that says that wp too hardened at this point and the bl is the better angle of attack. That is both good and very scary. My comments are based upon what jcase has stated recently.
So let me ask this, if I temp root, install an adblock, and reboot, what happens? Clearly ill lose root but will the hosts file get overwritten?
Sent from my XT1254 using Tapatalk
mbarry55 said:
So let me ask this, if I temp root, install an adblock, and reboot, what happens? Clearly ill lose root but will the hosts file get overwritten?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
You wouldn't even be able to write to the host file in the first place.
Sent from my XT1254 using XDA Free mobile app
mbarry55 said:
So let me ask this, if I temp root, install an adblock, and reboot, what happens? Clearly ill lose root but will the hosts file get overwritten?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
To me temp-root is useless. I mean seriously, who wants to keep re-rooting and re-installing root apps after every reboot? I don't, that's for sure. Without write protection disabled you are going to be very limited in what you can do with any root method you use.
Oh, and I use AdGuard for blocking ads on my Droid Turbo. You don't need root for it to work and it works very well.
classic757 said:
Oh, and I use AdGuard for blocking ads on my Droid Turbo. You don't need root for it to work and it works very well.
Click to expand...
Click to collapse
Do you have a link for this?
Yes, here you go:
http://adguard.com