Related
What is the ideal case for your Nook Color?
Is it one that is available or not?
What are some of the features you would like it to have?
Do you want a fold case that covers the screen?
Is the micro usb port in a convenient location?
Looking for some ideas. Working on a shell now for a mold. Not sure if anything will come of it but want to see what you all are looking for in a case. Feel free to post your thoughts. Thanks.
I would like to see a one sided hard cover that can protect the screen when not in use and snap onto the rear when in use. Probably use the typical four corner frame system you see in many cases so nothing is obstructed.
Also, have a stand "system" so that when it is snapped to the rear you can prop up the NC. Maybe something like what you see on back side of keyboards. And like some keyboards I've seen, have different levels of lift. One lift level that slightly raises the NC off the surface, for typing and such. Another lift level that is like the leg stand you see on the EVO 4G or Archos 70, for video/picture viewing and the like.
Heh. First post around here. Been meaning to chime in on a thread and this is the perfect one to start. Only because I've been looking for something I described but there is nothing out there yet.
I'm looking for an inexpensive silicone gel skin, something I'd keep on pretty much all the time. I'm also keeping my eyes open for sturdy travel case.
There seem to be choices out there for both, I'm just waiting a bit for more of them to hit ebay.
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
drp1 said:
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
Click to expand...
Click to collapse
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
techboydino said:
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
Click to expand...
Click to collapse
Are you designing desktop/multimedia cases as well? I would love additional speakers on the NC and also a magnetic swivel X mount stand for desktop use.
My ideal case is not available yet. It is an envelope-like case that will allow me to pull the Nook out and use it naked. Something in nice black leather.
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
bugeyed1 said:
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
Click to expand...
Click to collapse
Good Idea, I may try that out.
Im not any sort of professional or anything, but I do have access to some pretty sweet resin's and molding equipment. Carbon fiber is the idea, but the glass mold and how I want to do the front part comes first. Ill keep the thread updated.
ideal nook case
looking for something very close to this case
http://www.amazon.com/gp/product/B0040VNRTG/ref=oss_product
just substituting the swivel belt clip for a kickstand
i like the idea of moving the usb jack to another spot but i think that would add alot of cost and effort to the case build
Rube Goldberg lives; or, is this even possible?
You asked for the ideal, here is mine. Not at all sure it is doable....
1. In the interest of keeping the total package as slim as possible, no back, unless it is necessary to support other features.
2. [Front] cover has a slot for a pad of paper and/or corner slots for index cards.
3. [Front] cover is hinged on the right (I'm right handed and I want to be able to write easily).
4. [Front] cover has a foldover flap to keep the paper or cards from contacting the screen when the cover is closed.
5. The cover can fold 180 degrees so that the cover lies flat against the back of the tablet.
6. The cover can support the Nook as an easel in landscape mode.
7. The cover can support the Nook as an easel in portrait mode - this might involve some sort of short extension legs or other support to raise the lower edge of the Nook an inch or so (and this might help with the need to plug in the USB connector at the bottom).
8. Bonus points for the ability to fold out a handle attached at the lower left corner when in portrait mode, sort of like a hand mirror.
9. And of course it should be strong, light, durable, elegant, and less than $40 US.
I'm ready to order as soon as I see the pictures of the finished product.
Thanks for the ideas everyone. Haven't worked on it in a few due to being out at CES. Unfortunately there were NO cases out there. Working with Speck to find something but tried everything else and could not even find a nice slip cover. Otterbox said they are testing designs so no real info there either.
My ideal case is something like
http://shop.brando.com/samsung-galaxy-tab-case-with-bluetooth-keyboard_p05269c0299d057.html
this.
Bluetooth keyboard case, waiting for bluetooth to work for NOOK!! and I could use it as a netbook and a tablet. IDEAL.
This is my cheap (free) case for my nook color. It’s the zippered case for my trucks instruction manual. The patch covers the ford symbol; if I need to hide it in plain sight I can pull the patch off and leave it in the back seat. It fits perfectly and there is a plastic divider on the inside I can put business cards and a small pad of paper (as others have asked). All I keep in it is a set of skullcandy headphones in an microfiber Oakley sunglass bag for cleaning the screen.
michael
-"I learned a very valuable lesson on my travels, Tucker. No matter how bad things might seem..."
-"They could be worse?"
-"Nope, no matter how bad they seem, they can't be any better, and they can't be any worse, because that's the way things fraking are, and you better get used to it Nancy. Quit yer *****ing."
Perfect case for the Nook Color
Before I bought my Nook, I had a Pandigital Novel that I bought on eBay.
In the same eBay search results page the Novel appeared on was a great case called BookArmor. Although it was $35, I bought it. And I haven't regretted it either.
The BookArmor case comes with a set of velcro-like pads that stick on the back of the tablet and allow it to be fixed to the case. The case itself is laminated steel and plastic covered with textured fabric. It zippers shut and the zipper sides are soft and stay out of the way when the case is opened. You have total access to all side buttons and ports. The inside surface that comes in contact with the screen is covered with a soft foam pad.
When I decided to get the Nook, I found out that the case I had for the Novel is the exact same case for the Nook Color. I really like this case and haven't even considered another one.
For more info go to extremeinkjet.com and click on BookArmor cases in the blue left-hand column. Pick any Delta 6 case ... there is a Nook Color one. Checkout their video at the bottom of the page.
It looks like this case is really popular too ... there aren't any left on eBay and the extremeinkjet site shows all out of stock for the Delta 6 case. Amazon shows one Delta 6 left for the Pandigital (same case) but it doesn't even show up for Nook Color.
I don't know if I'd call it perfect. But, I bought the B&N case with the vertical flap and ribbon with magnet on the end to hold it closed/open. It works well for me.
If they were available in store when I bought my nook, I would have also considered the silicone one. Although, if I went that route, I'd probably prefer the otter box version with the hard resin exterior an rubber liner. I would also have considered the black leather pouch one where you completely remove the nook to use it.
Alas, none of these were available to me when I made my purchase so I'm using what I have.
With either the otter box or the silicone I would gain a thinner form factor. But, I would never be able to completely cover the screen. With the pouch one, I would gain the thin form factor when using and would not add much when transporting. But, it's basically just a branded leather sleeve.
In the end, what drew me to the case that I bought was the vertical flap and ribboned magnet. 1 - with the horizontal flapped ones, the magnet does not flip around to hold the flap to the back of the case so it's open like a book with the flap dangling out the right side. 2 - with the vertical one that I got, you flip the cover over the top, move the magnet to the back to hold the cover in place and you have all your nooky goodness to go to town with!
Just my 2 cents.
jlh8733 said:
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
Click to expand...
Click to collapse
Wow...love love love this idea.
This would be great..a hard protective slide case.
This would definitely be a $$$ maker.
I bought a "Industriell Cover in Storm" cover and it works perfectly, very simple, protects the screen, and it's small.
I'm stealing your "DON'T PANIC" sticker on the back idea. thanks for reminding me.
Hi all,
I have recently switched to the Streak from owning all models of the iphone, and have not looked back. Such an awesome device, and android is great. Anyways, I had owned a case for my 3gs and Iphone 4 called the Mogotalk xd. It is a bluetooth/case/charger that keeps an extremely thin and very good bluetooth on the back of your phone. I have missed it very much, especially since the streak is huge and could really benefit from one of these...The product is very smart, and very thin...but this isn't a review, so you can check it out their site, which I can't link yet...just google or youtube it...
I contact ID8 support to ask if they would be making these cases for other devices, and they replied back that they would not. So, I decided to mod mine for my streak, and post it here in case anyone else wants to do the same. It came out very well I think, and was very easy...extremely useful...
I started by removing the felt lining (just peeled out), then, after messing around a bit, decided to just take an exacto knife to the rubber for the sides of the iphone. I cut right along the back of the case, so as to have a close fit. Pics attached ( I also cannot link pictures yet :-C)
I have 2 battery covers, so I then attached it with double sided tape (temporary, as I am looking for some way incorporate a kickstand next). I lined up the top of the case with the top of the battery cover. It still slides on fine. If someone wanted to, they could probably dremel the top of the case to fit perfectly on the battery cover, as the camera hole unfortunately is horizontal...and there are no electronics on the top half (bottom has charging port) The only thing you really lose is a few millimeters of thickness...but this thing is thin (still fits tightly in the car dock from dell) And now I have bluetooth that charges on my phone and is always with me. Really easy to do, and definitely worth it if you like talking on your phone, as this can be difficult with the streak. Let me know if you have any questions...you can pick this up on amazon or other sites for around 40-45 dollars..its worth it..
One thing to be careful of there is the battery compartment door. There's a power switch inside the Streak that's activated by a pin on the door and if the door moves your Streak will power down. This is a known problem with nothing on the door so I don't know how yours will behave with the extra weight/bulk hanging off it. I know good comfortable earpieces are hard to find so maybe you could incorporate the BT holder into another case instead of attaching it directly to the streak?
I thought about that, and it would be very easy for someone who wanted a case...however, I do not...The Case/bluetooth is extremely light, and for some reason, the battery cover now fits much more tightly in place..its not going anywhere...It would be really easy to just cut out out the back of a case, especially a silicone one, to fit...or to cut the top half as I said before and fit it into a hard case...
I picked up a Seidio Ledger Case. Nice build quality. Very easy to get the phone in but a little difficult to get it out. DO NOT grab it by the flip cover while trying to remove it. Tore it just the tiniest bit. Completely my fault though, I was tugging pretty hard. Overall I'm pretty happy with it but it doesn't activate the sleep/wake function on my M8. Is it not supposed to or is there a setting I need to change on the phone to activate that feature?
ajk511 said:
I picked up a Seidio Ledger Case. Nice build quality. Very easy to get the phone in but a little difficult to get it out. DO NOT grab it by the flip cover while trying to remove it. Tore it just the tiniest bit. Completely my fault though, I was tugging pretty hard. Overall I'm pretty happy with it but it doesn't activate the sleep/wake function on my M8. Is it not supposed to or is there a setting I need to change on the phone to activate that feature?
Click to expand...
Click to collapse
No setting, probably doesn't have a magnet on the flip cover? Should be one that hits the middle left side of the phone to trigger the on/off when opening/closing. Try it with a magnet and you'll see what I mean.
henderjr said:
No setting, probably doesn't have a magnet on the flip cover? Should be one that hits the middle left side of the phone to trigger the on/off when opening/closing. Try it with a magnet and you'll see what I mean.
Click to expand...
Click to collapse
It's got a magnet on the right side to keep the flip closed. Ran a magnet all along the left side and got nothing. Wonder if it's a rom thing though. I'm running viper rom. Does this phone have the screen on/off magnet feature normally? Never tried it before flashing away from stock.
ajk511 said:
It's got a magnet on the right side to keep the flip closed. Ran a magnet all along the left side and got nothing. Wonder if it's a rom thing though. I'm running viper rom. Does this phone have the screen on/off magnet feature normally? Never tried it before flashing away from stock.
Click to expand...
Click to collapse
I have viper and was just able to do it. Even thinks I have the dot view case on if I leave the magnet on and hit the power button. Don't have a way to show you unfortunately
henderjr said:
I have viper and was just able to do it. Even thinks I have the dot view case on if I leave the magnet on and hit the power button. Don't have a way to show you unfortunately
Click to expand...
Click to collapse
Where exactly are you putting the magnet?
http://youtu.be/vFYqEiIH-dw Used my pc's webcam. Upside down but you get the idea. Left side about 1/4 way in, half way up the phone.
If it doesn't work for you maybe you need to have the dot view app? https://play.google.com/store/apps/details?id=com.htc.dotmatrix
henderjr said:
http://youtu.be/vFYqEiIH-dw Used my pc's webcam. Upside down but you get the idea. Left side about 1/4 way in, half way up the phone.
If it doesn't work for you maybe you need to have the dot view app? https://play.google.com/store/apps/details?id=com.htc.dotmatrix
Click to expand...
Click to collapse
THANKS!. I was putting it right on the edge.
Here is what it did. Used double sided tape and this REALLY thin small round magnet I picked up in a pack at an office supply store. Put the magnet on the screen with the double sided tape on it. Stuck a business card into the car holder slot of the flip and put a piece of tap across the very top of the card to mark exactly where it sits when in the slot. remove the card from the slot and tapped it to the flip. closed the case so that the magnet now stuck to the card. Removed the card, put a piece of tape over the magnet to secure it better to the card and then slid the card back into the card slot. PERFECTION!!
Edit: It will activate DOT VIEW if you flip the case completely over.
ajk511 said:
THANKS!. I was putting it right on the edge.
Here is what it did. Used double sided tape and this REALLY thin small round magnet I picked up in a pack at an office supply store. Put the magnet on the screen with the double sided tape on it. Stuck a business card into the car holder slot of the flip and put a piece of tap across the very top of the card to mark exactly where it sits when in the slot. remove the card from the slot and tapped it to the flip. closed the case so that the magnet now stuck to the card. Removed the card, put a piece of tape over the magnet to secure it better to the card and then slid the card back into the card slot. PERFECTION!!
Click to expand...
Click to collapse
Glad I could help
Be careful using any credit cards with a magnet so close to them. Sort of defeats a large purpose of the Ledger case doesn't it/
wpbcubsfan said:
Be careful using any credit cards with a magnet so close to them. Sort of defeats a large purpose of the Ledger case doesn't it/
Click to expand...
Click to collapse
Actually got it because I wanted a flip case and liked how it looked. Figured I could stash an emergency $20 bill in there and a state ID, but I probably wouldn't ever put a credit card in there
I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?
BigDanInTX said:
I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?
Click to expand...
Click to collapse
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours
obsydian said:
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours
Click to expand...
Click to collapse
I tried to leave the packing on my Gear 2 but it peeled itself off within the first hour of wearing it.
That's pretty bad IMO, especially for just desk work. What type of desk? I didn't leave my original watchband on very long, since I thought it looked pretty cheesy. I bought a 22mm $20 leather watch band online and it looks and feels much better than the rubber strap that comes with it.
I would try and get it replaced under warranty but i guess they will tell you its your own fault etc..
If you still want the rubber straps, i would suggest, buy new ones on ebay and then get the cheapest `copter` displayfilm you can find and cut it to fit the buckle, should not have any more scuffing like that.
I too have a deskjob and i have nothing near the scuffing you have. Last week i got my carbon look skin from Skinomi and it came with a sticker for the buckle, atleast it will save me from some wear and tear onbthe buckle.
Sent from Galaxy no. N5120 via the LTE-network
my buckle came apart on my gear 2 neo cant figure out if there were screws in these holes or how it was held together , also I cant seem to locate original straps on eBay.
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
None of the magnetic items for the phones will cause any harm to your phone.
You may notice that the stylus doesn't work where the magnet is, but it will work just fine when you move the magnet.
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You do know many manufacturers use magnets in their devices and accessories, including Samsung and Apple, right? Every Apple smart case / cover utilizes magnets and (as much as I love Android) I can honestly think of no more reliable tablet than the iPad.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
kmarx said:
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
Click to expand...
Click to collapse
What sort of issues have you seen?
It seems strange that Samsung would release a product that would interfere with one of its flagship products and sell it as an accessory.
Mayonesa said:
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
Click to expand...
Click to collapse
I'm not sure if this is specifically what you're asking about, but I've been using a Scosche MagicMount (http://amzn.com/B00I608BJ8) for my car dash and love it! I lay the larger metal plate (it comes with two sizes) at the bottom of my case, oriented where the longer sides are parallel to the bottom of the phone (let me know if you need a picture). I don't stick the plate to my phone, but rather set it inside my case. It turns out to be the perfect length and height for the Note 5. Wireless charging and Samsung Pay still work great. I used that picture of the Note 5 where someone made the back of transparent to make sure the wireless charging coil inside the phone does not over lap with the metal plate that comes with the mount.
I bought a nice leatherette case for my Note 5 only to find that the S-Pen does not work on the right hand side where the magnet is. I took it off immediately and went back to my Body Glove case.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
charlesrogers74 said:
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
Click to expand...
Click to collapse
-Sigh-
Like I said. "Magnets will in no way harm the phone"
This isn't harming your phone, it does do as you have seen which is a TEMPORARY issue and has already been discussed, it will cause no permanent harm to the phone.
I don't know about magnetic holsters but magnetic car mounts most definitely YES. I've used many holsters over the years, for all kinds of types of phones. I haven't really thought about it till I saw this post. My buddy has a good magnetic car mount for his s7 edge, but I don't really know anyone at the moment that's using a magnetic holster. Just my opinion though, the last time I used a holster was way back in January and it was actually pretty good. It was a best buy branded platinum, with kickstand holdster and case like a 3 in kind of deal but not magnetic. It fit could on my belt clips for my jeans and suit pants. Good luck
bought the Bracketron brand at best buy, the magnetic part is on the mount, it is a metal plate stick to your phone so no interference from the magnet, not owning a note 5 tho.
I put in some small tin paper cutouts INSIDE my note 5. I took the back cover off, peeled the sticker with the color/logo and spraypainted it a nice black then just glued the tin paper inside of that. Then I took a flat wireless charger and added neodymium magnets to it, modded it to be as small/thin as possible then covered it up with some black thin leather I bought from Michaels. I mounted it up to my car's console and now I just plop the phone onto it and it sticks tight and fast charges, no wires or case. Worked perfectly, but in hot weather the leather would become a bit slippery so it would slip off, but I fixed that with a couple of very small circular double sided gel tape on the bottom just to provide a bit of friction. I've ridden like this for the past 5 or 6 months and it doesn't slip or fall off at all, heavy bumps, hot weather, nothing dislodges it.
The only thing that doesn't work is the spen, and that's only directly over the magnets, but I wouldn't write on it anyway while it was mounted. Otherwise I've had zero difficulties with it. I'll post up pics if anyone is interested, but it's a bit frankenstein looking.