Database Develop

[HOW TO] Gen 9 didn"t start after a low battery

Hello,
this post to share a process after you let your archos with low battery.
If you don"t see anymore the green led when you plug your usb power (with the right cable, bigger than a normal one) = No led blinking or continue led. Or you could see your green led only works 1 times during 1 on 2 secondes, and after nothing happens.
I tried something, that I calledin french "le bouche à bouche", which we could translate in "mouth-to-mouth resuscitation".
Note : There are differents step when it happens. I'm not sure again about the different case.
Process :
. Be sure that the devices is OFF : Press short power button, wait, long press (over 10sec)
. Plug and unplug 4 to 5 times quickly your usb power from your archos gen9.
And miracle, He's a live!!!
. Then if you have just 2 s of green led. Let the usb power during 1 day (normaly it's enough).
. After, try to disconnect the USB and plug it again. You should see a 2/3 quick blink green led. Let i plug like that for less than 1 day.
. After to charge quicker the battery, go into recovery menu.
It's worked for me and my brother.
Add : - warm the device up (e.g. with a hair dryer)

it is ok for many archos

Tks for the info

That did not help me
After it has been discharged fully (and it happened for the first time after Arhos G9 80 was purchased) I cannot charge it anyhow
No green LED after I connect it to the charger. No any reaction on pressing and holding power key
And what is strange, while it was working brother connected it to the charger and LED was lighting green, but there were NO ANY CHARGING as percents of battery in device were only decreasing until 1% and then display went black and now I cannot charge anyhow.
Seems like I have to go to service. Any other ideas?

UltraMaks said:
Seems like I have to go to service. Any other ideas?
Click to expand...
Click to collapse
I am now in the same situation.
But it seems to be that others can re-animate it with different solutions:
- plug-in, -out by turns (like in this topic)
- press short power button, wait, long press (over 10sec), wait, short press
- plug-in on computer
- plug-in, plug-out, press long power button, wait, plug-in by turns
- a mix of above
and:
- warm the device up (e.g. with a hair dryer)
The goal is to boot the device because only then it can charge the battery.
I will try all this, this afternoon (here is now 3pm).
I hope that something helps.

There are differents step when it happens. I'm not sure again about the different case.
When you have really and anymore battery. You just have 2 s of green led. Let the usb power during 1 day (normaly it's enough).
After, try to disconnect the USB and plug it again. You should see a 2/3 quick blink green led. Let i plug like that for less than 1 day.
I will update the top of this topic.

This didn't work for me.
I returned my Archos to get it fixed.
I'm so dissapointed in this tablet. What tablet doesn't charge when it is turned off?
It has a dual core processor but can't even manage to function 20 seconds without lagg. The stock browser is so slow it's a joke. Too bad though because other then that it is a very good browser.
The machine has random reboots when playing a movie of browsing. The XDA always cracshes randomly when using it.
I'm putting 50 euros on top of the price to get myself an Asus transformer.
Was fun while this lasted.

Thanks, this helped me out 2 times! Ur the best
Sent from my HTC Wildfire S A510e using XDA App

It's a pleasure!
Your welcome!

[Q] charging notification led light

Hello all,
I want to know is it possible to make the led notification light on while charging when the phone is on?
Like when the phone is off
Is there an app or a script?
Thx

You can charge your Motorola Droid 1 with the device shut off?
Mine turns on the moment I plug it in.
The charge indicator LED (directly next to the micro USB port) is on the whole time that the phone is plugged in (except for while it boots up).
-CM7 on DInc2

When you connect the milestone while its off it turns on and show you the M logo but it doesn't boot the os then it shows the battry percent and the led light turns orange and when it charges full it turns green
I want that to happen while the phone is on like the n900

Oh, I didn't know that! Sounds like something the milestone has over the CDMA Droid.
I'm sure you could control the LED based on charge state with something like Tasker.
Maybe someone else with more experience will have a better idea than me.
Good luck!
-CM7 on DInc2

[Q] My galaxy note only turn on when charging

Hi.
Maybe the answer is already posted but I didn't find.
So, my phone turn on only when I plug-in in my computer or with charger.
The battery is +90%.
I am running with this : PhilZ-cwm6-DDLRB-ODD-v3.99 (find here : http://forum.xda-developers.com/showthread.php?t=1901191)
and with this : cm-10.1-20130323-NIGHTLY-n7000.zip (find here: http://wiki.cyanogenmod.org/w/N7000_Info)
When I turn on the phone normally unplugged :
The phone starts with the GALAXY NOTE N7000 logo and a big yellow triangle.
Then the cyanogen logo appear 1-2 sec
The phone shoot down itself.
When I turn on the phone in clockwork mode, there is no problem
When I turn on the phone plugged there is no problem, I can use it.
When I unplug it, it crash after 10 - 60 sec
Thanks for any help

AW: [Q] My galaxy note only turn on when charging
Try to use a cm10.1 kernel first.
Sent from my GT-N7000 using xda app-developers app

I had similar thing, while Note didn't die immediately after unplugging, after switching WiFi on or some more energy consuming app, screen started to blink and Note went down. Everything was OK when plugged. It was battery in my case, so I would guess it could be yours as well, if its around 1 year old.

It is very strange, I didn't use it for many hours (he was turned on)
then I gone on the internet with it and he crash directly.
I try a battery from a friend who had the same phone. And it worked ! So I think it is the battery.
Thanks to you !

Dead phone - need help

hey guys,
I left my phone to download a few Mb of data for a game using Wifi. The phone was connected with PC thourgh USB cabel. When i came back red light was on and now it´s dead. I can´t turn it on anymore, everything it does is blink red light 3 times when i press the Turn on button.
Bootloader is unlocked.
Can i do something or is it really dead?

It seems i overheated the battery ... i cleaned arround the battery connector and now it works again - charging from 0%

Hi,
Could you add the [SOLVED] tag to the title?
Thanks,
~Lord

remix mini , green light no picture , how can I check the board ?

I have remix OS that got no picture via HDMI when the green light is on when the power plug in.