Database Develop

A2DP Blueooth Car Stereo won't reconnect to mobile

I have the Pioneer DEH-P9800BT Bluetooth Head Unit in my car, which supports stereo BT music streaming from any A2DP device.
I also have the HTC TyTN II Mobile which supports the same.
I have paired the two devices, and on the initial pairing successfully played music from the HTC through the Pioneer. When that worked, the BT Audio icon appears in the title bar of the mobile (headphones with a musical note in the middle).
However, after switching off the car and later returning, I have 2 issues:
1) It is impossible to reconnect the BT stereo music playback, unless I delete the Pioneer device from the list of BT devices within the mobile phone, then pair them again. Nothing else seems to work. Simply, I just want all music to be routed through the Pioneer whenever it is in range of the mobile.
2) I have set the mobile phone as "Phone 1" in the Pioneer, and have enabled "Auto Connect", yet it does not auto connect. Every time I get in the car I have to manually scroll to Telephone>Function>Connect Phone>Phone 1. You can imagine what a laborious pain that is compared to my previous 5 year old Nokia Bluetooth Car Kit which just auto-connects whenever my mobile is in range.
Are you able to solve either problem?

Anyone ?
I have a similar issue with a Bluetooth clip (allows my Shure headphone to be used over bluetooth)
I have to go Start/Settings/Connections/Bluetooth, click onthe headset and "Set as Wireless Stereo", whereas my car bluetooth headset will auto-detect and re-connect.
Is this poor hardware or is the A2DP protocol not defined for re-connection standards, so different appliances act differently?

I found A2DP Toggle via Google. Just download that for free and it'll solve the issue!

CJSnet said:
I found A2DP Toggle via Google. Just download that for free and it'll solve the issue!
Click to expand...
Click to collapse
I've been using A2DP Toggle myself for some time and must say that it is an awesome little utility. One word of caution, however, is that people (myself included) have been finding that the today screen plug-in has a tendency to really drain the battery fast! You can read a bit more on this issue at http://www.teksoftco.com/forum/viewtopic.php?t=1626&postdays=0&postorder=asc&start=0
To get around the battery drain problem I've removed the plug-in from my today screen and simply generated program shortcuts on my today screen (using Pocket Plus or UltimateLauncher) to execute the utility in command line mode. So you get the benefit of toggling A2DP on/off with a single screen tap without the downside of battery drain from the today screen plug-in.
To turn A2DP ON create a shortcut that runs:
"Program Files\Teksoft\A2DPToggle\a2dp.exe -a2dp: on"
To turn A2DP OFF create a shortcut that runs:
"Program Files\Teksoft\A2DPToggle\a2dp.exe -a2dp: off"

Pairing the Bluetooth with Jabrasp700?

Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.

Edris said:
Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.
Click to expand...
Click to collapse
I have the same problem with my SP700 and my Tritton BT stereo headset.Phone calls work almost all the time through the SP700 speaker, but playing music or through the FM radio seems to be a problem. I can get them to pair up sometimes by only checking the Wireless Stereo box. It works for a few times, but then I have to delete and re-pair again.
I've searched for all over for answers, but nothing seems to be a permanent fix. It's very frustrating to use my devices for anything else but phone calls.

Just to add a bit of info, I do not have any problems with my old Motorola HS820. Of course, I'm not using SP700.
Hope that helps your troubleshooting.

I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal

Possible solution
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking

Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.

Edris said:
Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.
Click to expand...
Click to collapse
Thanks! Nice App! Tried it with my Tritton BT stereo headset and it works! Had to install to my device instead of Storage card, then had to delete and re-pair, but it so far I can toggle between on and off Stereo Headphones without any problem. Will try on my SP700 shortly.
I attached the Cab if anyone else wants it.
Thank you!
Works with SP 700!!!!!

Mal Bridgeman said:
I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal
Click to expand...
Click to collapse
When the software loads, follow the instructions, do not install with any of the microsoft wizards that pop up, it will install itself. I couldn't find anything that lists what changes that were made.

SP700 Firmware
FYI,
I too had the same issues and downloaded the sp700 firmware update. I thought the same thing about the drivers, but called Jabra and they told me the firmware update has the drivers embedded in it. When you start the install you cannot plug it in till it tells you to. After you plug it in it installs the drivers. But BEWARE I have not been able to complete the upgrade, it stopped halfway and bricked. I called support and they said there is nothing to do, but luckily I bought it from Costco and they returned it. So being not so bright I tried it again but on a different computer (thinking that there might be a conflict) and it didn't even load and bricked it again. So I returned it yet again. So then I gave up on Jabra support and found A2DP toggle. It works good enough, so I am leaving it at that....
Take Care
David
Tilt WM6.1

andrew-in-woking said:
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking
Click to expand...
Click to collapse
I have the exact problem that you are having with the new, Hyperdragon IV, ROM.
Is this A2DP Toggle really the only way - I mean what's the difference between pressing a button on my Kaiser to reconnect and pressing the button on the SP700 ??
I have tried using Mortscript as shown http://forum.xda-developers.com/showthread.php?t=382172&highlight=a2dp&page=2 Although I edited the end out because it kills the player after ending a call. This hasn't helped either
I am off to see if the same problems occur with my lady's N96. If not and no good solution can be found for this I may have got her a new present.
Aren't I nice ?!

Found another possible solution, it,s called zoA2DP. So far it works flawlessly between my SP700 & stereo headset without having to toggle anything or change any settings. When you install it, delete your original pairings and add them again, make sure that hands free & wireless stereo are checked in advanced options on you BT settings. I believe this is a registry mod, there are no icons or any noticeable applications running in the backround.
The thread is here
http://forum.xda-developers.com/showthread.php?t=279127
Cab file attached

Bluetooth headset wouldn't pair / get into pairmode

Hello everyone,
I've a problem with my headset - it doesn't turn into the pairing mode, which should automaticaly happen when it finds a phone with activated bluetooth... but no way.
Tryed to search for the device (Grundig bluetooth headset) with activated bluetooth (with and without "visible to other devices") but no chance.
Is there a way to send a pairing request from the phone? Is there a known bug of pairing?
Greetings
Mex

Found the solution - not the xda was failing but the headset instructions was... to enter the pairing mode, it was not enough to wait - on startup I've to press "+" with the power button... such a mistake into the the instructions are a total fail.

WiFi and Bluetooth Not Working Simultaneously

I recently purchased a bluetooth headset (Audionic B-666), but I am unable to use it to its fullest.
Whenever I connect headset while my wifi is on, internet connection stops working. Chrome shows not connected to internet.
If I connect headset first and then connect wifi, headset disconnects.
Headset works fine with my falcon and laptop.
I am running fully stock 5.1.1. Updated to build 10.7.A.0.222.
I know it is a known bug. Is there any permanent solution to it? I have read on different forums that factory reset will fix it temporarily. Is there any way to fix it without returning the device?
Or my only chance is to flash a custom ROM?

Anyone?

Issue with BT and Car Audio system

Hi,
when I start my car, my phone doesn't connect automatically to my car bluetooth (mitsubishi ASX 2012) and doesn't play music from phone like all my old phones do.
If I make or receive a call, then the phone connects to my car, but when the call is over it disconnects again form the car.
I found a solution to this problem: on bluetooth "other setting" I select my car device and turn off "multimedia audio" option and after a few seconds turn on it again. In this way all works well, but I would like fix it permanently without my manual intervention every time.
I have MIUI Global 12.0.1.0. (QFKMIXM, android 10 QKQ1.190825.002) but this bug was already present on MIUI 11.
Any ideas?
Thanks

Cervante$ said:
Hi,
when I start my car, my phone doesn't connect automatically to my car bluetooth (mitsubishi ASX 2012) and doesn't play music from phone like all my old phones do.
If I make or receive a call, then the phone connects to my car, but when the call is over it disconnects again form the car.
I found a solution to this problem: on bluetooth "other setting" I select my car device and turn off "multimedia audio" option and after a few seconds turn on it again. In this way all works well, but I would like fix it permanently without my manual intervention every time.
I have MIUI Global 12.0.1.0. (QFKMIXM, android 10 QKQ1.190825.002) but this bug was already present on MIUI 11.
Any ideas?
Thanks
Click to expand...
Click to collapse
Same thing for me in my Honda, im on mortal os latest. It worked on stable build xiaomi.eu 12.0.2.0
Now i have to do the same trick as you or use an aosp rom it works perfectly there).

I have similar issue with hotspot turned on - as soon as i turn it on, it repeatedly disconnects my bluetooth devices, and also hotspot client connections.
it was present in MIUI 11, also is present in MIUI12, nothing helped, even full factory reset.
It was last time i bought xiaomi i think.

Try resetting / wiping wifi and BT settings from share/connections.
I have my device in Spanish so not sure how it's called in English

:No-Frost: said:
Try resetting / wiping wifi and BT settings from share/connections.
I have my device in Spanish so not sure how it's called in English
Click to expand...
Click to collapse
I have tried that as first thing. Did not help.
* But I have changed rom so I did it in new rom and will test - thank you.
Sent from my Mi 9T Pro using Tapatalk

Cervante$ said:
Hi,
when I start my car, my phone doesn't connect automatically to my car bluetooth (mitsubishi ASX 2012) and doesn't play music from phone like all my old phones do.
If I make or receive a call, then the phone connects to my car, but when the call is over it disconnects again form the car.
I found a solution to this problem: on bluetooth "other setting" I select my car device and turn off "multimedia audio" option and after a few seconds turn on it again. In this way all works well, but I would like fix it permanently without my manual intervention every time.
I have MIUI Global 12.0.1.0. (QFKMIXM, android 10 QKQ1.190825.002) but this bug was already present on MIUI 11.
Any ideas?
Thanks
Click to expand...
Click to collapse
Same issue with my 2012 Mitsubishi Lancer! How annoying.

After trying all the suggestions listed, including turning the phone connection and media connection settings on both my phone and my car stereo off and on in various sequences, I've finally found a solution.
Go to developer options > networking > Bluetooth AVRCP version
The default setting is AVRCP 1.4, change it to AVRCP 1.5
This fixed it instantly for me.
Hope this helps anyone else with this issue :fingers-crossed: