Database Develop

[Q] Moto X XT1092: 5.0.2 System update getting failed.

I am not sure why it is happening with but i am not able to install 5.0.1 (12 MB) update on my Moto X 2014. I have unlocked bootloader and phone is rooted running on 5.0 Lollipop firmware.
Baseband Version:
MSM8974BP_4125.184.08.27.01R
VICTARA_EMEA_CUST
System Version
22.21.19.victara_reteu.retailuall.en.EU retin
It downloads the update file.
Reboot the device.
Goes into recovery and show me that it's installing the update. Half way on the progress bar the phone reboots.
After booting I see message which tells me that System update installation is failed. It does not give an error message or reason.
I tried installing it multiple times but same results. Any help will be appreciated.

To add Motorola Device Software updater shows me that my firmware doesn't have any available updates. Whereas i am getting regular notifications to run system update.
I attached screenshot of Motorola Device Software updater.

You should be happy, i had exact same config, and had soft brick when trying to upgrade. I believe you can't do the update if you are rooted. So you must flash stock back and then update.
Sent from my XT1092 using Tapatalk

remma said:
You should be happy, i had exact same config, and had soft brick when trying to upgrade. I believe you can't do the update if you are rooted. So you must flash stock back and then update.
Sent from my XT1092 using Tapatalk
Click to expand...
Click to collapse
My phone keeps displaying that i have pending system update. What is the right way to get the update without bricking your phone?
After your update i am not going to try any workaround methods to force upgrade. But this is something that should be well explained by Motorola or Android community somewhere on internet. I think need to wait till the time more helpful resources are available.

gaggid said:
My phone keeps displaying that i have pending system update. What is the right way to get the update without bricking your phone?
After your update i am not going to try any workaround methods to force upgrade. But this is something that should be well explained by Motorola or Android community somewhere on internet. I think need to wait till the time more helpful resources are available.
Click to expand...
Click to collapse
i think just flashing back the stock system partition using fastbot should do it. I haven't done this myself though, i needed to completely reflash stock

gaggid said:
To add Motorola Device Software updater shows me that my firmware doesn't have any available updates. Whereas i am getting regular notifications to run system update.
I attached screenshot of Motorola Device Software updater.
Click to expand...
Click to collapse
I am facing the exact same problem.
I am currently on 22.21.19.victara_reteu.retailuall.en.EU and the update notification I am getting is for 22.121.1
I have an unlocked bootloader but the phone is not rooted.
I do not agree that OTA update doesn't work when phone has an unlocked bootloader and is rooted. The Android 5.0 update got installed on my phone when it was already rooted (I lost root access after the update).
Still looking for solution for "OTA installation failed" problem though...

gaggid said:
I am not sure why it is happening with but i am not able to install 5.0.1 (12 MB) update on my Moto X 2014. I have unlocked bootloader and phone is rooted running on 5.0 Lollipop firmware.
Baseband Version:
MSM8974BP_4125.184.08.27.01R
VICTARA_EMEA_CUST
System Version
22.21.19.victara_reteu.retailuall.en.EU retin
It downloads the update file.
Reboot the device.
Goes into recovery and show me that it's installing the update. Half way on the progress bar the phone reboots.
After booting I see message which tells me that System update installation is failed. It does not give an error message or reason.
I tried installing it multiple times but same results. Any help will be appreciated.
Click to expand...
Click to collapse
please post link of xt1092 5.0.2 en.EU ota zip (+/-12MB) tnx

Please for the love of god be a legend and post a link of this OTA i cannot find it anywhere! Copy paste it off of your phone when it downloads and upload it to dropbox or something. Please. Without this I cannot update to 5.1 :'(

aleckz999 said:
Please for the love of god be a legend and post a link of this OTA i cannot find it anywhere! Copy paste it off of your phone when it downloads and upload it to dropbox or something. Please. Without this I cannot update to 5.1 :'(
Click to expand...
Click to collapse
So far My 5.0.1 update never got downloaded and i was not able to update the phone using Motorola update. Therefore i flashed Cyanogenmod 12.1 which has latest Android build. This way i stopped annoying alerts of system update on my phone.

Android 5.1.1 update

Hello I tried to do to update my G900a
BASEBAND VERSION: G900AUCU3BOC4
build number: LRX21T.G900AUCU4BOF3
acording to this:
http://forum.xda-developers.com/att-galaxy-s5/general/5-1-1-phones-t3231280/page6
download the G900A-OF3toOI5-ota-2400258.cfg file, rename it update.zip, update from sd card
but unfortunately the phone is still on Android 5.0. Is someone was able to update to 5.1.1?
can someone give me a link to correct update version for my phone?
why in Settings/ About Device my BASEBAND VERSION and build number don't match?
http://1drv.ms/1PPZtYi

I'd like to get this update also. Every Time I try it fails at around 32%.
Any ideas to try? I have already cleared cache, factory reset and nothing works.

Why are you not following http://forum.xda-developers.com/att...w-to-update-to-g900aoi5-5-1-unrooted-t3235774 ?

No mobile network after flashing default android 6.0.1

After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.

EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
Hi u , u can pm for me via zalo : +84974405300 . I can help u .

No
EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
I had this exact problem with SM-G890A on 6.0.1. I flashed a stock firmware, and I had no mobile network, sim card wasn't detected, etc. The problem was that my device had the most recent update (from March). I am not an expert, but I believe this update makes it harder for devices to be susceptible to flashes (hence "extra security"). To fix this problem, after flashing a stock firmware, I put my phone in recovery mode (volume up, power, and home) and downloaded ADP, and from there, I was able to download each update after my stock firmware until I reached the update that I was on before I ever flashed. I hope that makes some sense. There is a great post on here with the updates available for download and instructions on how to use ADP. I wish I still had the link, but try searching the updated version that you should be on. Whenever I finished the last update and my phone restarted, I restarted it again in recovery mode and cleared the partition cache. Restarted it again and VIOLA, I finally had service. Feel free to email me if you have any questions. Sorry, I am not great at explaining things. I hope you can resolve this. [email protected]

Fixed and Downgraded
I had this same issue. I was able to fix it by first upgrading back to 7.0 as mentioned above, and then flashing ONLY the BL and AP files of the 6.0.1 firmware using Odin. Worked for me.

U need flash to android 6.0.1 build Pk8.

EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
Hey I had the same problem as you and I was panicking. I downgraded to 6.0.1 from 7.0 final version but the SIM/IMEI/Broadband/anything phone related was broken. What happened was the final build of 7.0 upgrades the security of the SIM/IMEI/Broadband and so if you flash any other firmware, it won't work with the newer security and it'll remain unknown. To fix this, you have to upgrade to 7.0 final build again. Just adb sideload all the way back to 7.0 final QD1 and your SIM/IMEI should activate again. I guess ATT/Samsung is preventing us from downgrading just like Apple

Flash the Nougat Odin package.

Should I update? (L09C636B168)

Hello I have a P9 EVA-L09C636B134. I live in the US.
EMUI 4.1
Android 6.0
Phone works ok, it feels slow at times. A reboot usually fixes it for a day.
I have my FIRST EVER UPDATE from the updater (B168). Should I do it? It says there are 2 patches: first one is entirely in chinese, the second one says a few things like add watermarks, fix UI issue, optimize startup, etc.

Yes. Why are you still on marshmallow? Nougat has been available since last year.

Twisted Prime said:
Yes. Why are you still on marshmallow? Nougat has been available since last year.
Click to expand...
Click to collapse
I read that the update made their phones use more battery or something. Also I don't know how to manually update, I assumed it would hit this updater thing but I never got an update off the updater. No risk to update you think? I should just do it?

jibbbyy said:
I read that the update made their phones use more battery or something. Also I don't know how to manually update, I assumed it would hit this updater thing but I never got an update off the updater. No risk to update you think? I should just do it?
Click to expand...
Click to collapse
Im on latest firmware and I get 5-6 hours sot, emui 5 performs much better and you can use greenify for better battery life. I think you should update because we are getting emui 8 soon which has machine learning and provides better performance and battery.

Twisted Prime said:
Im on latest firmware and I get 5-6 hours sot, emui 5 performs much better and you can use greenify for better battery life. I think you should update because we are getting emui 8 soon which has machine learning and provides better performance and battery.
Click to expand...
Click to collapse
Ok updated! I don't notice anything different. I am still at EMUI 4.1 and Android 6.0. Should I update these? How do I do it? I am interested in risk free updates. Thanks!

jibbbyy said:
Ok updated! I don't notice anything different. I am still at EMUI 4.1 and Android 6.0. Should I update these? How do I do it? I am interested in risk free updates. Thanks!
Click to expand...
Click to collapse
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.

Twisted Prime said:
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.
Click to expand...
Click to collapse
Thanks, but I don't know what OTA is or what firmware finder is.

jibbbyy said:
Thanks, but I don't know what OTA is or what firmware finder is.
Click to expand...
Click to collapse
OTA = Over the Air. Official update delivered by Huawei. Go to Settings > System Update and check for updates.
FirmwareFinder = App to show/browse/download available and future firmware updates on Huaweis servers. Only necessary for those who flash updates manually.
In your case go to System Update. There should be an update. Maybe you have to do this a couple of times to reach latest Nougat-Version. Good luck!

Jan Philipp said:
OTA = Over the Air. Official update delivered by Huawei. Go to Settings > System Update and check for updates.
FirmwareFinder = App to show/browse/download available and future firmware updates on Huaweis servers. Only necessary for those who flash updates manually.
In your case go to System Update. There should be an update. Maybe you have to do this a couple of times to reach latest Nougat-Version. Good luck!
Click to expand...
Click to collapse
Yea so Like I said this update was the first that ever showed up in the "updater"... And there are no more. I always thought its cuz I live in the US but idk

Twisted Prime said:
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.
Click to expand...
Click to collapse
Hello,
I have firmware finder. Can you tell me how to properly update my phone using this? I have never used it and only received one OTA update EVER on my phone.

jibbbyy said:
Hello,
I have firmware finder. Can you tell me how to properly update my phone using this? I have never used it and only received one OTA update EVER on my phone.
Click to expand...
Click to collapse
1. Set proxy settings on your wifi: (Server: localhost Port: 8080)
2. Search your model number
3. Select an update package (FullOTA-MF recommended) (FullOTA-MF-PV for android version updates)
4. Select in-app proxy (should get a notification proxy is running)
5. Download the package in system updater

Twisted Prime said:
1. Set proxy settings on your wifi: (Server: localhost Port: 8080)
2. Search your model number
3. Select an update package (FullOTA-MF recommended) (FullOTA-MF-PV for android version updates)
4. Select in-app proxy (should get a notification proxy is running)
5. Download the package in system updater
Click to expand...
Click to collapse
Thank you. Perhaps I did something wrong.
1) set proxy to "localhost" and port "8080"
2) my model number was there, clicked it
3) went back to check settings: settings are (show packages for current region OFF, in app proxy port 8080, use simple OFF, show only fullOTA ON)
4) clicked first package (full OTA - MF)
5) clicked in app proxy
6) go to "updater" in settings
7) updater has package, click download and install
8) error "package checksum error." (immediately, before 1% downloaded).
Is it possible I need to not update the most recent one? I am still on android 6.0, EMUI 4.1 and like I said never had any other update OTA before (never used firmware finder). Thank you!
edit: restarted the phone, the package is now gone. Maybe I should do a different package, maybe an older one, not the most recent one?

jibbbyy said:
Thank you. Perhaps I did something wrong.
1) set proxy to "localhost" and port "8080"
2) my model number was there, clicked it
3) went back to check settings: settings are (show packages for current region OFF, in app proxy port 8080, use simple OFF, show only fullOTA ON)
4) clicked first package (full OTA - MF)
5) clicked in app proxy
6) go to "updater" in settings
7) updater has package, click download and install
8) error "package checksum error." (immediately, before 1% downloaded).
Is it possible I need to not update the most recent one? I am still on android 6.0, EMUI 4.1 and like I said never had any other update OTA before (never used firmware finder). Thank you!
edit: restarted the phone, the package is now gone. Maybe I should do a different package, maybe an older one, not the most recent one?
Click to expand...
Click to collapse
Try the next build number up from your current one, one by one. When you get to the last marshmallow build, install the PV package to get to nougat.

Twisted Prime said:
Try the next build number up from your current one, one by one. When you get to the last marshmallow build, install the PV package to get to nougat.
Click to expand...
Click to collapse
Ok thanks, I am trying the oldest build B361 from B168. The download started.
There are 19 total packages, 14 before the first VD package. Holy **** this is going to take forever!
Thank you very much for your help.
Can you explain why these dont come automatically, why I need to do this manual process? Is it because I am in the US?
Also why do I need this proxy port thing?
Thanks again!

jibbbyy said:
Ok thanks, I am trying the oldest build B361 from B168. The download started.
There are 19 total packages, 14 before the first VD package. Holy **** this is going to take forever!
Thank you very much for your help.
Can you explain why these dont come automatically, why I need to do this manual process? Is it because I am in the US?
Also why do I need this proxy port thing?
Thanks again!
Click to expand...
Click to collapse
You just need the proxy so the package goes to your updater. You can set it back to default after.
What model number do you have?

Twisted Prime said:
You just need the proxy so the package goes to your updater. You can set it back to default after.
What model number do you have?
Click to expand...
Click to collapse
I have a L09C636!

jibbbyy said:
I have a L09C636!
Click to expand...
Click to collapse
You should Just need to install b193 (FullOTA) > b394 (PV) and your on nougat

Twisted Prime said:
You should Just need to install b193 (FullOTA) > b394 (PV) and your on nougat
Click to expand...
Click to collapse
There is no option for B193. all of the packages are in the 300's.
The download finished (I think) but it could not install. It said I needed to free up some space. I uninstalled some apps and now it will not let me view the progress (I clicked new custom version, it just takes me back to my setting page). in my notification screen, it as EMU download percetnage at -930% and it is not moving. I tried restarting a few times it all stays the same. Current version still says B168.
edit: I clicked menu and then "download latest full package" and it seemed to have reset everything. Should I try this package again? To repeat, this is the oldest package on firmware finder, B361. I also noticed there are duplicates in firmware finder... and some of the packages are for L09,L19 and L29, these are all safe to download? Should I keep doing oldest 1 by 1?
Thanks again for your help, sorry I am so noob.

jibbbyy said:
There is no option for B193. all of the packages are in the 300's.
The download finished (I think) but it could not install. It said I needed to free up some space. I uninstalled some apps and now it will not let me view the progress (I clicked new custom version, it just takes me back to my setting page). in my notification screen, it as EMU download percetnage at -930% and it is not moving. I tried restarting a few times it all stays the same. Current version still says B168.
edit: I clicked menu and then "download latest full package" and it seemed to have reset everything. Should I try this package again? To repeat, this is the oldest package on firmware finder, B361. I also noticed there are duplicates in firmware finder... and some of the packages are for L09,L19 and L29, these are all safe to download? Should I keep doing oldest 1 by 1?
Thanks again for your help, sorry I am so noob.
Click to expand...
Click to collapse
Just try any PV package.
Only download those for LO9C636
Try this one:

Twisted Prime said:
Just try any PV package.
Only download those for LO9C636
Click to expand...
Click to collapse
There are two PV packages and they look like this
https://imgur.com/a/6VzOgZf
it says all 3 models but when you click on it it says L19 for both...

Anyway to force update to my SM-G920A? Need help please

Sorry I'm new here but I hope someone can help me out
My grandfather recently passed away and had this phone laying around.
I'd like to use it with another carrier and ATT gave me the unlock code to the device.
The thing is the device is running Android 5.1.1 and the build version is from 2015.
Nov. 24, 2015
Android version: 5.1.1
Baseband version: G920AUCU3BOJ7
Kernel version: 3.10.61-5927475
Build number: LMY47X.G920AUCU3BOJ7
Since its not connected to the ATT network anymore, I can't seem to update it.
Apparently the latest updates have been from 2018 and running Nougat.

aceofpilots said:
Sorry I'm new here but I hope someone can help me out
My grandfather recently passed away and had this phone laying around.
I'd like to use it with another carrier and ATT gave me the unlock code to the device.
The thing is the device is running Android 5.1.1 and the build version is from 2015.
Nov. 24, 2015
Android version: 5.1.1
Baseband version: G920AUCU3BOJ7
Kernel version: 3.10.61-5927475
Build number: LMY47X.G920AUCU3BOJ7
Since its not connected to the ATT network anymore, I can't seem to update it.
Apparently the latest updates have been from 2018 and running Nougat.
Click to expand...
Click to collapse
https://forum.xda-developers.com/att-galaxy-s6/general/sm-g920a-nougat-7-0-1-stock-att-odin-t3811566
This is the latest android update for G920A (android nougat)

stek-kravari said:
https://forum.xda-developers.com/att-galaxy-s6/general/sm-g920a-nougat-7-0-1-stock-att-odin-t3811566
This is the latest android update for G920A (android nougat)
Click to expand...
Click to collapse
If I use this, will it cause issues to get future updates from OTA?

aceofpilots said:
If I use this, will it cause issues to get future updates from OTA?
Click to expand...
Click to collapse
There are no more updates for G920A, this is the latest one

stek-kravari said:
There are no more updates for G920A, this is the latest one
Click to expand...
Click to collapse
Hence why I said if they intended to release anymore in the future.
Is there a step by step guide on how I can go about to use ODIN and these files?

aceofpilots said:
Hence why I said if they intended to release anymore in the future.
Is there a step by step guide on how I can go about to use ODIN and these files?
Click to expand...
Click to collapse
This files are from at&t servers, they cannot do any harm to your device,
After you download the firmware extract it, download and install samsung drivers https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Put your device in download mode by holding power+home+volume down and connect it via usb to your pc
Open Odin 3.12.3 and click on the 'BL' button, then choose the file that starts with "BL" inside your extracted firmware folder. Next, click on the 'AP' button and choose the AP file inside your extracted firmware folder. Click on the 'CP' button, choose the CP file inside your extracted firmware and finally click on the 'CSC' button, choose CSC file inside your extracted firmware and click START

stek-kravari said:
This files are from at&t servers, they cannot do any harm to your device,
After you download the firmware extract it, download and install samsung drivers https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Put your device in download mode by holding power+home+volume down and connect it via usb to your pc
Open Odin 3.12.3 and click on the 'BL' button, then choose the file that starts with "BL" inside your extracted firmware folder. Next, click on the 'AP' button and choose the AP file inside your extracted firmware folder. Click on the 'CP' button, choose the CP file inside your extracted firmware and finally click on the 'CSC' button, choose CSC file inside your extracted firmware and click START
Click to expand...
Click to collapse
I figured as much.
I actually didnt even download the usb drivers and it worked from the get go.
thank you so much. I ended up wasting a dollar on an ATT sim card lol
Are there 3rd part Operating systems I can use on the G920A?
Or can i only use AT&T stock roms

aceofpilots said:
I figured as much.
I actually didnt even download the usb drivers and it worked from the get go.
thank you so much. I ended up wasting a dollar on an ATT sim card lol
Are there 3rd part Operating systems I can use on the G920A?
Or can i only use AT&T stock roms
Click to expand...
Click to collapse
You cannot install custom roms because the bootloader is locked, only at&t firmware

stek-kravari said:
You cannot install custom roms because the bootloader is locked, only at&t firmware
Click to expand...
Click to collapse
Got it
Thank you so much.
So now that I did this, I'll have the latest OS and android security patches for the phone?
Is there anything else I can do to the phone with modification to make it better?

aceofpilots said:
Got it
Thank you so much.
So now that I did this, I'll have the latest OS and android security patches for the phone?
Is there anything else I can do to the phone with modification to make it better?
Click to expand...
Click to collapse
Yes, G920AUCS7ERC1 is the latest for G920A with security patch level: March 1, 2018
You can install some modded apps like : launchers, youtube vanced, always on display, and more

stek-kravari said:
Yes, G920AUCS7ERC1 is the latest for G920A with security patch level: March 1, 2018
You can install some modded apps like : launchers, youtube vanced, always on display, and more
Click to expand...
Click to collapse
where would be the best place to find those kind of things?

aceofpilots said:
where would be the best place to find those kind of things?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/apps-games/app-youtube-vanced-edition-t3758757
https://forum.xda-developers.com/android/apps-games/root-display-samsung-device-running-t3691231
https://forum.xda-developers.com/android/apps-games/app-rootless-pixel-2-launcher-google-t3688393