Android 5.1.1 update - AT&T Samsung Galaxy S 5

Hello I tried to do to update my G900a
BASEBAND VERSION: G900AUCU3BOC4
build number: LRX21T.G900AUCU4BOF3
acording to this:
http://forum.xda-developers.com/att-galaxy-s5/general/5-1-1-phones-t3231280/page6
download the G900A-OF3toOI5-ota-2400258.cfg file, rename it update.zip, update from sd card
but unfortunately the phone is still on Android 5.0. Is someone was able to update to 5.1.1?
can someone give me a link to correct update version for my phone?
why in Settings/ About Device my BASEBAND VERSION and build number don't match?
http://1drv.ms/1PPZtYi

I'd like to get this update also. Every Time I try it fails at around 32%.
Any ideas to try? I have already cleared cache, factory reset and nothing works.

Why are you not following http://forum.xda-developers.com/att...w-to-update-to-g900aoi5-5-1-unrooted-t3235774 ?

Related

[Q] HELP Cannot install or remove ROOT.

Hi
I'm using an at&t samsung galaxy s4 active I used
Model number" SAMSUNG-SGH-I537
Android version: 4.4.2
Baseband Version: I537UCUCNH3
Kernel Version: 3.4.0-2638177
What I tried?
1) Tried to install superuser, after installing superuser, its asking for binary files, which I'm not able to find anywhere.
According to root checker the phone is rooted.
2) Then I tried downloading "UPDATE-SuperSU-v2.16.zip" to my
external storage and tried fastboot, but that one also didnt work, the phone went into factory reset and the entire software got re installed.
Please can anyone Help??
Tom
slammin6 said:
Hi
I'm using an at&t samsung galaxy s4 active I used
Model number" SAMSUNG-SGH-I537
Android version: 4.4.2
Baseband Version: I537UCUCNH3
Kernel Version: 3.4.0-2638177
What I tried?
1) Tried to install superuser, after installing superuser, its asking for binary files, which I'm not able to find anywhere.
According to root checker the phone is rooted.
2) Then I tried downloading "UPDATE-SuperSU-v2.16.zip" to my
external storage and tried fastboot, but that one also didnt work, the phone went into factory reset and the entire software got re installed.
Please can anyone Help??
Tom
Click to expand...
Click to collapse
Did you read the sticky in the General section that gives you a step-by-step on how to root any i537 Firmware?
slammin6 said:
Hi
I'm using an at&t samsung galaxy s4 active I used
Model number" SAMSUNG-SGH-I537
Android version: 4.4.2
Baseband Version: I537UCUCNH3
Kernel Version: 3.4.0-2638177
What I tried?
1) Tried to install superuser, after installing superuser, its asking for binary files, which I'm not able to find anywhere.
According to root checker the phone is rooted.
2) Then I tried downloading "UPDATE-SuperSU-v2.16.zip" to my
external storage and tried fastboot, but that one also didnt work, the phone went into factory reset and the entire software got re installed.
Please can anyone Help??
Tom
Click to expand...
Click to collapse
This method is the only way to root NH3 (the firmware version your phone is on). Make sure to download the correct files

Problems flashing Android 5.1.1 on AT&T Samsung Galaxy S5 G900A

I've got android 5.0 Baseband version: G900AUCUcBOC4, but Build number is LRX21T.G900AUCU4BOF3.
Tried to update using zip file via recovery "OF3 to OI5" , got the error. Feeling confused what next i need to do. How to fix installation? Maybe the problem is in baseband and build number version? Help me please
Same problem here

Software Update Problem - Stuck in 5.0.2 SM-T710

Hi,
I purchased this tablet 3 days ago and it notified me a that new version (5.1.1) was available to download. After I did the download and the setup, no changes were noticed and the system version (5.0.2) is still there.
I tried to run again the software update but the device indicates me that my version is up to date and doesn't find the 5.1.1 update.
What could be the problem?
Is there another way to update the software without using OTA? If yes, could you please explain me how?
Thanks for your help!

ATT pushing an update today 3/10/2016

Any one know what the update is? it is 200mb.
Software update includes:
Device security enhancements
Device performance enhancements
Android version: 5.1.1
Baseband version: G900AUCU4CPA1
Kernel version: 3.4.0-5869384
Build number: LMY47X.G900AUCU4CPA1
Upgrade file size: 209MB
Thanks i just finished the update. I was hoping for 6.0.1
_LEM_ said:
Software update includes:
Device security enhancements
Device performance enhancements
Android version: 5.1.1
Baseband version: G900AUCU4CPA1
Kernel version: 3.4.0-5869384
Build number: LMY47X.G900AUCU4CPA1
Upgrade file size: 209MB
Click to expand...
Click to collapse
Can anyone please upload the file here, I can't download the file
I would definitely suggest taking this update if you are stock, unrooted. My phone has been very very laggy recently, but since this update the phone is not lagging and the phone is also not having massive battery drain and heating up. I have reset to factory and reinstalled apps numerous times, but generally after a week or two it would always return to this state. This update so far has seemed a lot better.
Looking for: [How-To] Update to G900A_PA1 - 5.1 and KeepRoot
We shall call it PA1 -s ource:
http://www.att.com/esupport/article.html#!/wireless/KB424848
Android version: 5.1.1
Baseband version: G900AUCU4CPA1
Kernel version: 3.4.0-5869384
Build number: LMY47X.G900AUCU4CPA1
Upgrade file size: 209MB
Hoping that @muniz_ri can create a FlashFire pack for us, aka "[How-To] Update to G900A_PA1 - 5.1 and KeepRoot"
YasharF said:
We shall call it PA1 -s ource:
http://www.att.com/esupport/article.html#!/wireless/KB424848
Android version: 5.1.1
Baseband version: G900AUCU4CPA1
Kernel version: 3.4.0-5869384
Build number: LMY47X.G900AUCU4CPA1
Upgrade file size: 209MB
Hoping that @muniz_ri can create a FlashFire pack for us, aka "[How-To] Update to G900A_PA1 - 5.1 and KeepRoot"
Click to expand...
Click to collapse
Someone that is rooted just needs to grab the ota.zip file and post the link...
I am in Canada have unlocked phone. Anyway to get the update?
Sent from my SM-N910W8 using Tapatalk
If anyone hv the OTA file please upload
Pls
Pardeepkalkandha said:
If anyone hv the OTA file please upload
Click to expand...
Click to collapse
Can anyone post the OTA file to manual updating the phone?
If anyone can, please let us know, also I need the file and can not download because I'm outside of at&t network.
PA1 thread with downloadable file: http://forum.xda-developers.com/att...w-to-update-to-g900aoi5-5-1-unrooted-t3235774
YasharF said:
PA1 thread with downloadable file: http://forum.xda-developers.com/att...w-to-update-to-g900aoi5-5-1-unrooted-t3235774
Click to expand...
Click to collapse
This is a beautiful work, but I need only in the 209mb file, which is the pure update.
Dyone Aliano said:
This is a beautiful work, but I need only in the 299mb file, which is the pure update.
Click to expand...
Click to collapse
I am on the same boat and hoping for someone to release an update.zip file of this.
My phone keeps attempting to download a 631MB update, then failing at 0% when the device reboots to install it. My ISP has a data cap, and this is going to cause me serious problems as the phone redownloads the entire update every day without any permission or acknowledgement from me. How can I disable or get around this?
Swarmofcats said:
My phone keeps attempting to download a 631MB update, then failing at 0% when the device reboots to install it. My ISP has a data cap, and this is going to cause me serious problems as the phone redownloads the entire update every day without any permission or acknowledgement from me. How can I disable or get around this?
Click to expand...
Click to collapse
It should only download over WiFi. What version are you on now? Rooted/stock?
LoSt180 said:
It should only download over WiFi. What version are you on now? Rooted/stock?
Click to expand...
Click to collapse
Yes, it only attempts to download on my home WiFi, and my ISP has a monthly data cap where if I exceed their allotment I have to pay more. So after a week of 631MB downloads and failed installations every day, I'm at the point where I can't connect my phone to my home WiFi any longer until this is resolved.
I'm stock, Android 5.0.
Swarmofcats said:
Yes, it only attempts to download on my home WiFi, and my ISP has a monthly data cap where if I exceed their allotment I have to pay more. So after a week of 631MB downloads and failed installations every day, I'm at the point where I can't connect my phone to my home WiFi any longer until this is resolved.
I'm stock, Android 5.0.
Click to expand...
Click to collapse
You might be able to manually update it. Go to Settings>About Phone and post the last 3 characters of the "build number". For 5.0, it would be something like OC4, OF2 or OF3.
The update path would be something like OC4 to OF2, then OF2 to OF3, then OF3 to PA1. I have the OF3 to PA1 update file.
LoSt180 said:
You might be able to manually update it. Go to Settings>About Phone and post the last 3 characters of the "build number". For 5.0, it would be something like OC4, OF2 or OF3.
The update path would be something like OC4 to OF2, then OF2 to OF3, then OF3 to PA1. I have the OF3 to PA1 update file.
Click to expand...
Click to collapse
BOF3 are the build numbers.
Swarmofcats said:
BOF3 are the build numbers.
Click to expand...
Click to collapse
My understanding is that you need to have a lot of free space on your phone, something like 5-7GB. For example, if you only have 1.5GB free, it will error out.
Here's the OF3 to PA1 update file if you want to manually install it. http://forum.xda-developers.com/showpost.php?p=65833865&postcount=125
Browse the earlier posts in that thread for instructions if you need them.

No mobile network after flashing default android 6.0.1

After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
Hi u , u can pm for me via zalo : +84974405300 . I can help u .
No
EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
I had this exact problem with SM-G890A on 6.0.1. I flashed a stock firmware, and I had no mobile network, sim card wasn't detected, etc. The problem was that my device had the most recent update (from March). I am not an expert, but I believe this update makes it harder for devices to be susceptible to flashes (hence "extra security"). To fix this problem, after flashing a stock firmware, I put my phone in recovery mode (volume up, power, and home) and downloaded ADP, and from there, I was able to download each update after my stock firmware until I reached the update that I was on before I ever flashed. I hope that makes some sense. There is a great post on here with the updates available for download and instructions on how to use ADP. I wish I still had the link, but try searching the updated version that you should be on. Whenever I finished the last update and my phone restarted, I restarted it again in recovery mode and cleared the partition cache. Restarted it again and VIOLA, I finally had service. Feel free to email me if you have any questions. Sorry, I am not great at explaining things. I hope you can resolve this. [email protected]
Fixed and Downgraded
I had this same issue. I was able to fix it by first upgrading back to 7.0 as mentioned above, and then flashing ONLY the BL and AP files of the 6.0.1 firmware using Odin. Worked for me.
U need flash to android 6.0.1 build Pk8.
EndSliceofBread said:
After flashing default android 6.0.1 on my s6 active my broadband version is unknown and I have no imei...not sure what to do.
Click to expand...
Click to collapse
Hey I had the same problem as you and I was panicking. I downgraded to 6.0.1 from 7.0 final version but the SIM/IMEI/Broadband/anything phone related was broken. What happened was the final build of 7.0 upgrades the security of the SIM/IMEI/Broadband and so if you flash any other firmware, it won't work with the newer security and it'll remain unknown. To fix this, you have to upgrade to 7.0 final build again. Just adb sideload all the way back to 7.0 final QD1 and your SIM/IMEI should activate again. I guess ATT/Samsung is preventing us from downgrading just like Apple
Flash the Nougat Odin package.

Categories

Resources