tempered glass screen protector recommendations... - Huawei Mate S

i tried a standard tempered glass protector for the Mate S from Ebay, seems the phone has a slight curve at the edges (like the S6 i previously had), and the glass protector i got isn't really a snug fit. also tried an invisible shield original protector, snug fit but has an orange peel look to it and isn't 100% transparent.
what are you guys using?

i use the standard screen protector from amazon named mumbi..
it is clear, fits perfect as described from the store..
the mate s has a light curved display, so the screen protector has to be a bit smaller to fit perfect..
Gesendet von meinem Mate S CRR-L09 B303

Related

Tempered glass

Does anyone use a tempered glass? Because of the curved edges I suppose that a tempered glass will not cover the hole screen and might look ugly. I currently have a simple screen protector that looks fine, but I am thinking of buying a Nillkin tempered glass like e.g the one in the link http://m.ebay.com/itm/HOT-NILLKIN-9...en-For-HUAWEI-MATE-S-/262097328806?nav=SEARCH
In general I am satisfied with the quality of this brand. Any other suggestions?
Sent from my Huawei Mate S using Tapatalk
https://www.amazon.de/dp/B0199KN38M/ref=cm_sw_r_awd_gir7wbFZ9A00F
have you tried this one yourself? how does it fit? so far all the ones i have tried are too small i would like it to fit nearer the edges so it is not so obvious.
has anyone been able to find one that fits very close to the edges.
There's now some companies making Tempered Glass specifically for curved edges like iPhone 6/s, Galaxy etc etc.
The trick is apply silicone on the edges of the tempered Glass.
But i havenĀ“t found for Mate S yet...
has anyone found a tempered glass that fits correctly and does not leave too much of a gap at the edges and most of all reduces fingerprints on this thing?
My best fitment guess would be nillkin tempered h+pro. I just ordered it to my phone its ultra thin and it really protects screen from shattering if you drop (hand to floor). I have owned that protector on my Nexus5, G3 and G4 and i really love it.
dekr94 said:
My best fitment guess would be nillkin tempered h+pro. I just ordered it to my phone its ultra thin and it really protects screen from shattering if you drop (hand to floor). I have owned that protector on my Nexus5, G3 and G4 and i really love it.
Click to expand...
Click to collapse
Replying to my own post nillkin protectors leave huge gap betweeen edges and protector dont buy if you want sleek look!!
The note 4 glass fits pretty good
Sent from my HUAWEI CRR-UL00 using XDA-Developers mobile app

orzly fusion bumber and oneplus curved screen protector

Hi,
I just wanted to mention that I just tried the combination of the oneplus curved screen protector and the orzly fusion bumper case combo. In the YouTube video posted by absolutely savage (https://www.youtube.com/watch?v=c9PL1SyhKJo) it was shown that they were not compatible in the sense that the case lifted the edges of the screen protector off the phone. I had that effect at first but I was able to tuck the screen protector under the case and it works just fine!

Ultra thin case

Anyone out there have an ultra thin case? I prefer these as it doesnt add much bulk to the phone. Whats the thinnest one available but not flush with the screen so if falls flat, the screen doesnt break.
I have a Nillkin Nature, and its pretty compact with a good grip.
Enviado de meu MI 6 usando Tapatalk
I bought a ringke fusion and don't want another case. Good grip, protection and it's a beautiful case.
Sent from my MI 6 using Tapatalk
felipefda said:
I bought a ringke fusion and don't want another case. Good grip, protection and it's a beautiful case.
Click to expand...
Click to collapse
Its good but you have to make sure to get the screen protectors that leave a little bit of room around the edges of the screen or the case will just push the screen protector off haha.
It is a damn good case and you can also just file off the edges to make room for the larger screen protectors like I did.
I agree with you.
Sent from my MI 6 using Tapatalk
Dobsgw said:
Its good but you have to make sure to get the screen protectors that leave a little bit of room around the edges of the screen or the case will just push the screen protector off haha.
It is a damn good case and you can also just file off the edges to make room for the larger screen protectors like I did.
Click to expand...
Click to collapse
Which screen protector did you get?
ermacwins said:
Which screen protector did you get?
Click to expand...
Click to collapse
Generic Chinese ones. Always the best. Mostly because this is a phone primarily for the Chinese market so they have the best accessories for it.
Get them on Ali express. If they don't have black at the tip and bottom they should be the smaller sized ones.
Unfortunately cheap means inaccurate and you have to buy white edge remover which is a liquid you can fill the edges of the screen protector so you don't have air in between the sides of the screen and the protector. Works fine and you can get 10 bags for like $2.
Screen protector will be like $1-2 or less if you get in bulk.
Get a case with edges to protect the screen.
If the fall has enough force to break the screen protector the screen itself won't last no matter how strong or expensive the protector was.
Case is the primary defence and the glass screen protectors protect from scratches and feels nicer than plastic film.
Dobsgw said:
Generic Chinese ones. Always the best. Mostly because this is a phone primarily for the Chinese market so they have the best accessories for it.
Get them on Ali express. If they don't have black at the tip and bottom they should be the smaller sized ones.
Unfortunately cheap means inaccurate and you have to buy white edge remover which is a liquid you can fill the edges of the screen protector so you don't have air in between the sides of the screen and the protector. Works fine and you can get 10 bags for like $2.
Screen protector will be like $1-2 or less if you get in bulk.
Get a case with edges to protect the screen.
If the fall has enough force to break the screen protector the screen itself won't last no matter how strong or expensive the protector was.
Case is the primary defence and the glass screen protectors protect from scratches and feels nicer than plastic film.
Click to expand...
Click to collapse
I have a Nillkin Nature soft cover, and a Nillkin H+Pro Anti-Explosion Tempered Glass screen protector.
That being said, does anyone know and recommend a good tempered glass that covers the full front and edges ?
I ordered this type.. Will come a week or two..
https://m.ebay.com/itm/Ultrathin-So...864570?varId=431590766053&txnId=1406981526003
Aixuan is great... 6.55$ on Aliexpress,
regards,
JC

Note 8 Screen Protector Suggestions?

So I have a Note 8 and started with the Zagg Glass Curve, and then the Whitestone Dome. I loved it, but it will not fit my case. I need to get a screen protector that fits a UAG Monarch.
The dimensions for the opening of the case are as follows: Width: 73.6mm Length: 158.47mm
Thanks!
DatBoiRev said:
So I have a Note 8 and started with the Zagg Glass Curve, and then the Whitestone Dome. I loved it, but it will not fit my case. I need to get a screen protector that fits a UAG Monarch.
The dimensions for the opening of the case are as follows: Width: 73.6mm Length: 158.47mm
Thanks!
Click to expand...
Click to collapse
This one fits. Used it with the Plasma. Disadvantages, vertical stripes because of the glue. And the glue collects dust. Anyway the only one i've found fitting with UAG.
https://www.amazon.de/dp/B075YPSQSY/ref=cm_sw_r_cp_apa_-MauAbPZV4BS6
Gesendet von meinem SM-N950FD mit Tapatalk
Seem like all of them collect dust. I've had three with same results. I hate it!!!
Sent from my SM-N950U1 using Tapatalk
I use this tempered glass, it works really well with my Spigen case and I only had sensitivity issues when i type super fast.
https://www.amazon.com/gp/product/B077MJXNJP/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I am using a Bodyguardz Pure Arc ES then put some LOCA glue under the edges to make sure they stay down. The LOCA is probably overkill but it works well.
I use this with a Spigen Liquid Air case : https://www.amazon.com/dp/B074G1W2RC/ref=sspa_mw_detail_0?psc=1
Sent from my SM-N950U using Tapatalk
Oh, and no sensitivity issues that I've noticed... Also works with GearVR.

my experience with case n tempered glass for Note 8

Used the bundled case for a couple of days, realised its just a scratch proof cover, no impact protection.
Ordered a Spigen bumper case and wet application Spigen film, somehow was not satisfied with the protection it offered.
Nothing happened to the phone after a 3' drop, the Spigen case worked well and the film felt a bit flimsy.
Looking out for a full case; then found this on Amazon
"SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Galaxy Note 8 (2017 Release), Unicorn Beetle Shield Series"
Covers the phone completely, and has a plastic film screen protector. Impact protection is awesome, but the screen response with the film deteriorates.
Popped out the plastic film,& installed a tempered glass screen protector. The cover matches up well with the glass screen protector.
"SUPCASE Galaxy Note 8 Screen Protector, Premium Edge-to-Edge Full Coverage Tempered Glass Screen Protector"
Installation of both is a breeze, both over in 30 mins. Ofcourse, the sensitivity of the screen reduces slightly, esp on the curved edge and when u have dry fingers. Better than cracked screen/back, i have magic fingers, make me drop almost everything I hold!!!
Used it for about a month, adds bulk n weight to the device, then, I have big hands & this feels good to hold.
And the wireless charging works perfectly, and the stylus helps when fingers give up!
Product link pls.
Thanks
Sent from my SM-N950U1 using Tapatalk
not allowed to post links
badrsj said:
Product link pls.
Thanks
Sent from my SM-N950U1 using Tapatalk
Click to expand...
Click to collapse
Am not allowed to post links However, have posted the full description of product from Amazon, so easy to search.
Update:
The tempered glass broke when i was replacing the SIM, ordered a new 1. The installation was a breeze, seems to adhere better to the screen, very less loss in sensitivity... Quality variation in production or Spigen really improved their glass shape, or both?

Categories

Resources