Ultra thin case - Xiaomi Mi 6 Accessories

Anyone out there have an ultra thin case? I prefer these as it doesnt add much bulk to the phone. Whats the thinnest one available but not flush with the screen so if falls flat, the screen doesnt break.

I have a Nillkin Nature, and its pretty compact with a good grip.
Enviado de meu MI 6 usando Tapatalk

I bought a ringke fusion and don't want another case. Good grip, protection and it's a beautiful case.
Sent from my MI 6 using Tapatalk

felipefda said:
I bought a ringke fusion and don't want another case. Good grip, protection and it's a beautiful case.
Click to expand...
Click to collapse
Its good but you have to make sure to get the screen protectors that leave a little bit of room around the edges of the screen or the case will just push the screen protector off haha.
It is a damn good case and you can also just file off the edges to make room for the larger screen protectors like I did.

I agree with you.
Sent from my MI 6 using Tapatalk

Dobsgw said:
Its good but you have to make sure to get the screen protectors that leave a little bit of room around the edges of the screen or the case will just push the screen protector off haha.
It is a damn good case and you can also just file off the edges to make room for the larger screen protectors like I did.
Click to expand...
Click to collapse
Which screen protector did you get?

ermacwins said:
Which screen protector did you get?
Click to expand...
Click to collapse
Generic Chinese ones. Always the best. Mostly because this is a phone primarily for the Chinese market so they have the best accessories for it.
Get them on Ali express. If they don't have black at the tip and bottom they should be the smaller sized ones.
Unfortunately cheap means inaccurate and you have to buy white edge remover which is a liquid you can fill the edges of the screen protector so you don't have air in between the sides of the screen and the protector. Works fine and you can get 10 bags for like $2.
Screen protector will be like $1-2 or less if you get in bulk.
Get a case with edges to protect the screen.
If the fall has enough force to break the screen protector the screen itself won't last no matter how strong or expensive the protector was.
Case is the primary defence and the glass screen protectors protect from scratches and feels nicer than plastic film.

Dobsgw said:
Generic Chinese ones. Always the best. Mostly because this is a phone primarily for the Chinese market so they have the best accessories for it.
Get them on Ali express. If they don't have black at the tip and bottom they should be the smaller sized ones.
Unfortunately cheap means inaccurate and you have to buy white edge remover which is a liquid you can fill the edges of the screen protector so you don't have air in between the sides of the screen and the protector. Works fine and you can get 10 bags for like $2.
Screen protector will be like $1-2 or less if you get in bulk.
Get a case with edges to protect the screen.
If the fall has enough force to break the screen protector the screen itself won't last no matter how strong or expensive the protector was.
Case is the primary defence and the glass screen protectors protect from scratches and feels nicer than plastic film.
Click to expand...
Click to collapse
I have a Nillkin Nature soft cover, and a Nillkin H+Pro Anti-Explosion Tempered Glass screen protector.
That being said, does anyone know and recommend a good tempered glass that covers the full front and edges ?

I ordered this type.. Will come a week or two..
https://m.ebay.com/itm/Ultrathin-So...864570?varId=431590766053&txnId=1406981526003

Aixuan is great... 6.55$ on Aliexpress,
regards,
JC

Related

Verizon G2 Tempered Glass and Diztronic Case Review

Ok I have purchased hohoo 9H Tempered Glass Screen Guard and 2 Diztronic Cases (Diztronic Matte Back Black Flexible TPU Case and Diztronic High Gloss Clear (Frosted Matte Inside) Flexible TPU Case)
First, the Hohoo Screen Protector...I had little trouble putting it on cause the Hohoo Screen Protector width size was exactly the size of the screen...so I spent a lot of time aligning it perfectly...but after I put it on the screen response with the protector on was good and the screen looked exactly the same as the screen without any protection. Just one thing that is bothering me is that on the top of the protector It doesnt stick well so it makes air gaps...If the air gaps were not big i will not care that much but right now it is coming down all the way to my front facing camera. when I press down on the gaps it decrease and as times goes by the gap gets bigger... I have contacted the seller and see if this is a defected product or not...so I will know pretty soon if i need to live with this or not. But in overall performance of this screen protector is really good in my opinion.
Second, the Diztronic Cases...With Hohoo Screen Protector the case fits really nicely. Its really slim case with good grip on the back. The matted black one was little bit more slippery feeling than the clear case. But the Matted black looks better than the clear one in my opinion.
All the cut out holes were perfectly aligned. This case will protect against everyday use scratches but if you drop the phone i dont think this case will protect it from saving your phone. Overall, if you want a slim case that doesnt any much bulk and protects every corner of your phone get it...if you think you will drop the phone get more bulkier case like otterbox or incipio dualpro.
I have order another Tempered glass protector called "SNP Glass Premium Tempered Glass"...It should be arriving soon so I have to see if that is better than Hohoo protector.
I have put links to the products that I have bought and some pictures.
Hohoo Tempered Glass
http://www.ebay.com/itm/181254589923?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Diztronic Cases
http://www.amazon.com/gp/product/B00FEQU1NG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
SNP Glass Premium Tempered Glass
http://www.ebay.com/itm/SNP-Glass-Premium-Tempered-Glass-Mobile-Devices-Screen-Protector-For-LG-G2-/301015449031?pt=US_Cell_Phone_Screen_Protectors&var=&hash=item4615eb3dc7
the diztronic matte case looks really nice, probably gonna get that. Wish it didn't have the logo there but otherwise it is exactly what I want in a case for my G2. Had the Diztronic case for my Verizon Galaxy Nexus and it didn't have any logos, was hoping the logo was only there as a watermark in the Amazon photos but oh well, still want it.
kg2128 said:
the diztronic matte case looks really nice, probably gonna get that. Wish it didn't have the logo there but otherwise it is exactly what I want in a case for my G2. Had the Diztronic case for my Verizon Galaxy Nexus and it didn't have any logos, was hoping the logo was only there as a watermark in the Amazon photos but oh well, still want it.
Click to expand...
Click to collapse
It is a really good case compare to the options that there is for the verizon version. I really dont see any other that is slim as this case with decent protection. In my opinion...the logo looks not to bad....I thought about getting the poetic palette case...but it doesnt protect the bottom and the top so i skipped on that one.
kalooann said:
It is a really good case compare to the options that there is for the verizon version. I really dont see any other that is slim as this case with decent protection. In my opinion...the logo looks not to bad....I thought about getting the poetic palette case...but it doesnt protect the bottom and the top so i skipped on that one.
Click to expand...
Click to collapse
I would like to know which glass screen protector is better. Please let us know. Thanks
Are you leaving the blue protector on the camera ring intentionally?
Is the Hohoo screen protector really tempered glass?
From here it lists it as PMMA.
http://www.amazon.com/Enhanced-Optical-Bulletproof-Protector-Optimus/dp/B00G46WQRE
PMMA is plexiglass.
jmilacek said:
Are you leaving the blue protector on the camera ring intentionally?
Click to expand...
Click to collapse
Yeah need to take it off...Didnt really pay attention to the camera ring...since i rarely flip the phone.
yyz123 said:
Is the Hohoo screen protector really tempered glass?
From here it lists it as PMMA.
http://www.amazon.com/Enhanced-Optical-Bulletproof-Protector-Optimus/dp/B00G46WQRE
PMMA is plexiglass.
Click to expand...
Click to collapse
No. I dont think it is glass...cause I think they are made by using PMMA. Its basically acrylic.
and it doesnt quite feel like glass, but close though. I might be wrong but i think this is a film that has 9h hardness made with PMMA, but with all the characteristic as the tempered glass. Im using it so far and had really no problem on the sensitivity or visual. The screen protector doesnt get scratches and it feel so much better than the cheap screen protector films.
One problem for me is that my screen protector's top part of the film was keep having gaps...so I emailed the seller...and they told me they are going to ship me a new one. In my opinion if you want to get a characteristic as tempered glass protector with less money go for this screen protector. If you want the real tempered glass screen protector then this is not for you.
I still havent received the other tempered glass protector...so until that comes im going to leave this protector on.
jmilacek said:
Are you leaving the blue protector on the camera ring intentionally?
Click to expand...
Click to collapse
I left mine on. I have a Incipio Blue Feather case, and it kinda matches. It also protects.
I even have the plastic stickers still on over my back buttons. They never came off and don't interfere. so why not?
I'm getting interested in some glass SP. I have a cheap Verizon one on there now and its ok. I've seen the ones with the colored (white/black) edges that cover up the logos, which looks REALLY good. Basically looks like a whole new bevel. Have you tried those?
I'm currently looking for some comparisons. I know our screens are hard because of the tapered edges.
player911 said:
I left mine on. I have a Incipio Blue Feather case, and it kinda matches. It also protects.
I even have the plastic stickers still on over my back buttons. They never came off and don't interfere. so why not?
I'm getting interested in some glass SP. I have a cheap Verizon one on there now and its ok. I've seen the ones with the colored (white/black) edges that cover up the logos, which looks REALLY good. Basically looks like a whole new bevel. Have you tried those?
I'm currently looking for some comparisons. I know our screens are hard because of the tapered edges.
Click to expand...
Click to collapse
Ok the ones with the colored edges tempered glass protector...Well I had that kind of screen protector for my verizon galaxy nexus. The makers were from xgear...and I really didnt like it since it cracked so easily after little bump to the edge of the screen protector...so if you are thinking of buying xgear's tempered glass...i really dont recommend it. (http://www.xgearlive.com/products/android/samsung/fantom) <-- This is what I have bought...They claim it is 8H harden protector...but in my case it was really looked really weak tempered glass. It covered the whole surface of the phone but it crack easily. I had two of the same tempered glass (one black and one white) and both crack easily.
I saw this --> (http://www.ebay.com/itm/NEW-LG-G2-T...l_Phone_Screen_Protectors&hash=item4aca615c3b) on ebay...and was going to try it out if neither of the two tempered glass protector didnt work out for me. But only one came but it didnt fail me yet so no need to buy it right now.
But you have to think though if the screen protector is covering the whole screen you have to get a case that doesnt interfere with the screen protector. So back when I was using verizon galaxy nexus, I used cases like the poetic palette case, which has really minimum protector for the phone.
In my opinion...I really dont recommend xgears tempered glass protectors...I think they are really weak made...I personally recommend the Korean brands...or if spigen's tempered glass protectors if they make it.

My VZW G2 Screen Protector and Cases Review

I'm going to post one at a time...so the pictures don't get confused with others. I hope this helps
.....1.....The SNP Tempered Glass Protector (Price $32.00)
This one took a long time to receive it since it was coming from Korea with really slow cheap shipment, but the product had no damage so it was all good.
I thought I did good installation on the Tempered glass protector, but all around the edges I had gap (You can see it from the pictures). I contacted the seller and they told me that this screen protector is not for Verizon model, because of the 1mm curved edges. I guess the Korean version of the G2 don't have curved edges and I don't know about Atnt or Tmobile models.
So they gave me a full refund, since they didn't mention that it is not for Verizon models.
But if you have the Korean Version of the phone I really recommend it.
The Tempered glass protector covers close to edge to edge. The responsiveness and the clarity is excellent. The feel of this screen protector is really good. My fingers were sliding across really easy. Edges are smooth rounded so it feels smooth all around the edges.
Since the protector is close to edge to edge you can't use cases like the Diztronic cases or SGP Slim armor, etc. since it interfere with the screen protector that it will lift up the screen protector.
So you have to use the ones like Poetic Palette or Incipio Feather cases or etc.
Even though it had gaps all around the edges I have use this screen protector for 2 weeks and I had no issue with clarity or sensitivity. Overall performance of this tempered glass protector is really fantastic. If this had fit my phone then this one was a keeper...but It was just sad that it didn't fit my G2.
.....2..... Scosche 2.1A High Amp Dual USB Car Charger (Price $6.00)
If you are looking for fast dual USB car charger this one works out great. Like other dual USB car chargers have one 2.1A and one 1.0A Charging ports but Scosche car charging ports are both 2.1A charging ports. In other words...Scosche car chargers will charge 2 devices about the same speed as the OEM wall charger that you got when you bought your G2. It charges really fast.
Overall performance is really excellent. I have used this car charger for over 2 weeks now and have no problem so far. This just does exactly what it is suppose to do. It charges the phone as fast as the rapid wall charger, so this is a keeper for me. In my opinion this car charger is cheap compare other car chargers that charges slower than this.
.....3.....The Hohoo 9H Screen Protector (Price $12.50)
First this screen protector is NOT TEMPERED GLASS SCREEN PROTECTOR. This screen protector is made out of PMMA (Poly Methyl Methacrylate), it's basically acrylic. Im saying this because some of the sellers are posting this as a tempered glass protector when it is clearly not. There is a reason why the price point is low.
This one was a defected product which the top part of the screen protector adhesive part was not good that it made air gaps and if I leave it on for a couple of minutes it lifts up by itself, so I contacted the seller and the seller told me that he is sending a new one for me.
The installation wasn't that hard. The screen response was good and the screen clarity was really good. It feel like I was touching a tempered glass screen protector. My fingers glide really smooth. The screen protector size is basically little bit bigger than the screen, but it doesn't cover up the whole front side. In my opinion this is a really good size for the screen protector. Since I can put on Diztronic TPU cases without interfering with the screen protector (just has a tiny gap between the screen protector and the case edges).
Even though this was a defected product everything really work great except for the adhesive part. Going to wait for new one for my final opinion on this screen protector.
...4....The Hohoo 9H Screen Protector (Replacement)
I have received the replacement screen protector and the first thing that I have notice was that the boxing image was different from the first one that they have sent me. The next thing that was different was when I was installing it was the sensor area cut out. It doesn't make a huge difference but just fyi.
The second screen protector that I received had really good adhesives so I didn't get any air gaps. I had no issue with any sensitivity. The screen protector feels really smooth and my fingers slides through easily. The best part about this protector is that the size. I really think this is the best screen protector size for VZW G2.
I really like this screen protector but one problem for me with the screen protector was when I go outside in a really cold weather (near about 0°C) the protector just lifts up by itself for some reason. But if I put it back in a room temperature for a bit it start sticking back to the screen...I have tested 5 times doing this and also sent an email to the seller and the seller just gave me a refund. But in room temperature it doesn't have any problem. The adhesive is actually really good that even though I reattached it more than 5 times it didn't made any gaps or lifting in room temperature. This might be the material of the screen protector problem or I might have got a bad batch but in my experience it happen like that.
Overall performance is excellent. If I didn't had any issue with the lifting then this screen protector was a keeper for me. In my opinion the feel and strength and display is in the same level as the tempered glass protector. If you want tempered glass protector like features without paying a lot. This screen protector might fit for you.
I still have this screen protector on since I don't have any issue in room temperature. But I just have order a new tempered glass protector made from Glassview. It should be coming soon so until then I'm going to keep using this screen protector.
.....5..... Diztronic Cases (Price $10.00)
First impression with these cases were that it's really slim case. Diztronic cases are made out of TPU material. I have purchase two of Diztronic cases, matted black and clear type. Both types of cases have really good grip. The matted black case had so much better resistance against finger prints than the clear case. The matted black case had little bit more slippery feeling than the clear case, but the Matted black looks better than the clear one in my opinion. One final difference between these two types of cases is that the matted black case is $1 more expensive than the clear case.
All the cut out holes were perfectly aligned. On the top it has a lip that even though you put it face down it will protect from the screen touching the surface. This case purpose is basically to protect against everyday use scratches. If you drop the phone with this case on I really don't think this case will protect it from saving your phone.
Overall, if you want a slim case that doesn't any much bulk and protects every corner of your phone this is perfect. But for some reason if you think you will drop the phone get more bulkier case like Otterbox or Incipio Dualpro or etc.
.....6.....Incipio Feather Shine Case (Price $29.99)
I have used this case for over 2 weeks now and it is just perfect for me. Especially the back aluminum finish looks really nice and I don't have to worry about finger prints on the back of my phone anymore. The case fits really tight so there is no worry that the phone is just going to fall off from the case. This case is a really low profile case that it only covers the back and the sides and the four corners of the phone, but not covering the bottom and the top of the phone. This case have slightly lower profile than the Diztronic cases. It has a really small lip on the side of the phone. The lip of the case was about the same size as my screen protector that if I put it face down the screen protector is touching the bottom too. Since my screen protector's thickness is around 0.33mm so I'm assuming that the lip size is around 0.33mm. I'm not too worry about putting my phone face down since the screen protector I have so far stood up pretty good, but if you don't have screen protector just be careful if you are putting it face down.
The back aluminum finish looks nice but it makes the phone a bit slippery. I got some scratches on the aluminum finished back already, I think these scratches came from the keys that was in my pocket. I mean the phone case purpose is to prevent from scratching the actual phone so it is doing its job but it got scratched way too easily than what I was expecting from this case. I think my Hohoo screen protector is so much better against scratches than the aluminum finished case since my screen protector haven't got any scratches so far.
A lot of people complain about this case because of the signal lost, but to me so far I have not lost any signals or the case cause a weak signal. I'm getting the same signal bar with or without the case. I think some people complaining about the signal lost with this case on have got a bad batch of the case.
Overall, I think if you want a really low profile case with really nice look on the back then this case might be good for you. This is not a drop proof case. It's the same thing that I said about Diztronic cases, this is not the case that you want if you think you are going to drop your phone. This case is basically to prevent from everyday scratches.
Did you ever receive that screen protector from Glassview?
Do the screen protectors need to specifically say for verizon? Or are they compatible with any model? I want to buy some screen protectors but they dont specify what model just lg g2
kalooann said:
.....5..... Diztronic Cases (Price $10.00)
Click to expand...
Click to collapse
This is definitely a great case for those who are looking for something to make the phone a little easier to hold and protect the back from scratches. The outer lip lets me put my phone face down whereas before I would be afraid of scratching the screen.
Heres an older thread for those interested in more pics. http://forum.xda-developers.com/showthread.php?t=2461151
JRJ442 said:
Did you ever receive that screen protector from Glassview?
Click to expand...
Click to collapse
Yes I have received the Glassview Tempered Glass protector...Im using it right now for a couple of days to see if this is good or not. So far I like it.
Ill post pictures later.
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
blueis300 said:
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
Click to expand...
Click to collapse
....what are you talking about...
I use the VZW Screen Protectors they had because I got 20% off the phone (when you buy 2 accessories) and they were like $7 for 3. The VZW guy didn't put it on very well but I used the second one and a hinge method to get it perfectly aligned and centered.
I use a Incipio Feather Rubber Matte Case and it doesn't affect the Screen Protector. The Diztronics are cool but I don't like the big lips around the edges that will screw with the protector sometimes. No problems with the Incipio.
Screen protectors are compatible for all models of G2. Only the Verizon Cases are different because I guess it is a 1mm thicker due to addition of Qi Charging.
the SNP Tempered Glass Protector fit in international model D802??
What do you like better, Diz or the Feather?
trifos said:
the SNP Tempered Glass Protector fit in international model D802??
Click to expand...
Click to collapse
I think so, but if I were you Ill just buy Glassview Tempered Glass Protector than SNP.
IamPro said:
What do you like better, Diz or the Feather?
Click to expand...
Click to collapse
I like both but Im using Feather Shine more than Diz right now.
.....7.....GlassView Tempered Glass Protector (Price $32.99)
I have used this Tempered Glass Protector for over 2 weeks now and I think this is the one that I'm going to keep.
First, the application process was really easy for me. I installed it in like 30s and was done with perfect alignment. The size and the cutout of this screen protector is just perfect. It avoid all the lifting all around the screen and it is really case friendly that it fits the Diztronic cases. Im not too sure about the bulkier cases like the otterbox or bulkier incipio cases since these cases use up a lot of bezel space. The Thickness is only 0.23mm but The quality of the screen protector is really good. It has 9H hardness that suppose to prevent from everyday scratches and more and it is also shatterproof. The sensitivity and feel of this screen protector is just fantastic. I had no issue with responsiveness and my fingers were gliding through really smoothly. It was really easy to wipes off the fingerprints from the screen protector. Between SNP and Hohoo Screen protector feel of the smoothness wise GlassView is a clear winner for me.
I think this tempered glass is better than the MIME Tempered Glass. Since MIME Tempered Glass is cut short on the sides that doesn't really completely cover the screen but GlassView is covers the whole screen.
Overall, I think this is the best Tempered Glass screen protector that you can find on the market right now (at least for me). I thought about buying iloome flex but it looked too thin and I really don't see that much difference between just regular screen protector and iloome flex. I wanted more sturdy screen protector and I think I found my winner. I think I'm going to stick with GlassView tempered glass protector for a quite a bit before I find something that is better.

looking about best cover and glass screen protector

hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
I've not found a "perfect" screen cover yet for the phone. I like the 2.5d screen but it makes finding a "perfect" tempered glass solution a problem. I have a full screen protector one on now and it's okay. I haven't found one of those that have adhesive on the entire back panel of the glass. The adhesive is only around the edges on the painted surfaces.
I have another one I haven't tried yet. It looks like it has adhesive on the entire back surface and the outer edges are made of carbon fiber (supposed to be anyway) The outer edges are at least a soft material that supposed to stick to the entire edge and curve around so that it fits a 2.5d screen better. The problem with the ones I bought is that you can't see the backlight from the buttons on the bottom of the phone. Not a deal breaker but a flaw in the design.
Do some searches on aliexpress or someplace and you'll see. Search for redmi note 4x carbon fiber to see the second one I mentioned and redmi note 4x tempered glass for the full screen ones I also mentioned. There are clear non full screen ones that don't go to the edges of the glass. I haven't purchased one of those and probably won't.
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
stephendt0 said:
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
Click to expand...
Click to collapse
I applied my tempered glass with my case on the phone. It's one of the full screen protectors with the painted frame around the outside. I think they do that to hide the fact that the glass doesn't fit to the curve. It looks good but I know it's not a perfect fit.
Upon research there appears to be fluid you can apply to the edges to get a perfect seal to remove the halo effect... I will investigate further
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
prisoner1969 said:
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
Click to expand...
Click to collapse
Yes... in my experience this doesn't last. I had two lift up and get dust underneath and then it was horrible after that. Also I got the weird rainbow effect in the middle of the glass and the keys at the bottom didn't line up exactly.
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
Buy from glazedinc.com
It's a perfect fit and it costs ₹400, they also provide cash on delivery in India.
Sent from my Moto G (4) using Tapatalk
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Atharkhan101 said:
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Click to expand...
Click to collapse
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
pooniaprashant said:
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Atharkhan101 said:
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Click to expand...
Click to collapse
tpu case was bought from local market (for about ₹150), if you are asking for tempered glass then just goto glazedinc.com

Tempered Glass or Hydrogel screen protector

I've been thinking of getting something to protect my precious and the original plastic one has lots of scratches on it.
so Tempered glass or Hydrogel film?
I've been doing research on this question too. It's like a mixed reviews. But a commonly seen answer is that they regret getting the hydro gel version and stick to the conventional tempered glass as some buyers indicated after a few days, the edge came off peeling and trapping dust while some others has high static attracting dust and easily scratch.
I usually prefer Tempered glass.
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Anyone found a tempered glass protector that actually does not lift on the sides? Such a pity if one uses a glass that doesn't cover the whole display.. =(
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Cccmachins said:
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Click to expand...
Click to collapse
What brand did you get and does it cover the whole screen?
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Pictures
Cccmachins said:
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Click to expand...
Click to collapse
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Jevansent said:
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Darktitor said:
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Click to expand...
Click to collapse
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Sent from my ALP-L29 using Tapatalk
jounin052 said:
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Click to expand...
Click to collapse
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
otonieru said:
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
Click to expand...
Click to collapse
Thanks... Wanted to see the one that @Cccmachins has because I ended up ordering the same Ozero TP... Guess I'll have to wait till I get it to see and decide if that works or if I need to keep looking.
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
tuffluck said:
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
Click to expand...
Click to collapse
That sucks... The tempered glass screen protector manufacturers seem to have a hard time making them fit perfectly on these curve edge phones... It's either to small or not sticking on the edges...
Jevansent said:
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Click to expand...
Click to collapse
Even the stock screen protector doesnt fully cover the edges. Is the nillkin tg the same or worse than the original SP in covering the side? Do you think the UAG plasma case is compatible with the nillkin tg?
i prefer this protector 9h tempered glass, it cover all the front, very clear also in sunlight, anti fingerprint. i buy it from local market, very satisfied
pictures
scrumptyous said:
What brand did you get and does it cover the whole screen?
Click to expand...
Click to collapse
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen bigger and bigger, resolution values are higher also. It is so necessary to get a high quality screen protector to protect the high valued smart phones. And the meanwhile, the screen protector cannot affect the touch sensitivity of phone screen , cannot decrease the brightness of the phone screen. So really it is not an easy solution.
Anyhow, we used to struggle which one is better? Tempered glass or hydrogel screen protector? Tempered glass is more thickness to 0.33mm, while hydrogel usually under 0.2mm, tempered glass cannot be full screen protector, while hydrogel can be full screen protector. Which is such a pity tempered glass cannot be full screen. Still except this flaw, other aspects is much much better than hydrogel protector. So we stick to tempered glass screen protector for Huawei Mate 10.
Here is what we prepare for our clients.
Flos®Huawei Mate 10 Transparent Full Protection Tempered Glass Screen Protector HD Anti-Scratch-[2 Pcs]
And we offer express shipping to Europe/USA within 1 week at 2usd shipping fees.
Also we are on Amazon for Europe.
Flosmall.com said:
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen..........
Click to expand...
Click to collapse
You know,
Sometimes its hard to trust a manufacturer, who despite promise the fine quality of their product, yet still manage to slip a typo on their commercial material,
Your images misspelled "tempered" as "temepred" and it doesn't sound convincing at all for me :silly:

Mi Note 3 Tempered Glass, Full Cover

I've ordered at about 5-6 Tempered Glass for our Mi Note 3, and it wasn't easy to find one which fitted our phone perfectly. If you'll order one, than search for 'full cover'
This one fitted our display perfectly and is rounded and cheap, too:
https://de.aliexpress.com/item/LITB...-Xiaomi-anmerkung3-Glas-Film/32846070628.html
Yep, finally gave up searching for a fully transparent one as none fits edge to edge, ended up buying the one you posted and somewhat satisfied because it covers edge to edge, albeit the precision is a bit questionable and the matte finish gives different impression of blue (it's more like purple). NVM, my back cover is protected with a transparent TPU case and I can still myself in the "mirror" which is very helpful for back camera selfie (I love to do that because pixel2mod front camera won't work in advanced features like bokeh).
I have a few ones`s: At the moment i use one 9H tempered, and with colour blue. Not the qualith of a Ultimate Shield or Nilkellin, but it works so far...
And covers all screen.
Im using this for my Blue model:
https://www.gearbest.com/screen-protectors/pp_1412259.html
Of course is not a Nilkellin or Ultimate Shield, but covers it all.
My tempered glass
Where did you buy it from?
Gogentle97 said:
My tempered glass
Click to expand...
Click to collapse
Where did you buy it? What brand is the tempered glass?
John Wiliam said:
Where did you buy it? What brand is the tempered glass?
Click to expand...
Click to collapse
Gogentle97 said:
I brought it in Taobao and I don't think it can spam oversea outside of China. It need special oil to fix 2.5d glass problem which is liquid but become solid when dry.
Link:
http://m.tb.cn/h.WvKQuxW
http://m.tb.cn/h.WvJERxN
Click to expand...
Click to collapse
Since mi note3 has curved edges, I bought soft protectors form taobao. Glass protectors dont fit very well.
Ace case do a tempered glass one that fits the corners perfectly. The main issue with it is that only the top and bottom coloured sections have glue on. Hard to explain but the part coving the screen doesn't so the slight air gap does effect viewing quality after a month or two.
I just got a ace case invisible screen protector to replace the tempered glass one and it is excellent. Obviously it won't protect as well from a large fall but I think it should still do a good job.
It's a soft plastic screen protector that you apply wet to the phone and it drys out after a few hours. Perfect fit and the quality is excellent. Feels good under the fingers and is very resistant to smudges. I'm really impressed so far.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/382360628993

Categories

Resources