Database Develop

(STOCK)(RECOVERY)Android One

Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)

SMARTY BOY said:
Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)
Click to expand...
Click to collapse
Will this work with Micromax Canvas A1 also ??

iremofaisal said:
Will this work with Micromax Canvas A1 also ??
Click to expand...
Click to collapse
Its posted in the android one group so I think it should work with an android one phone.
What do you think?

akhilnarang said:
Its posted in the android one group so I think it should work with an android one phone.
What do you think?
Click to expand...
Click to collapse
is it working with canvas a1 ?

srikantrn said:
is it working with canvas a1 ?
Click to expand...
Click to collapse
Yes
Sent from my A1 using XDA Free mobile app

After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1

ashesshubham said:
After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1
Click to expand...
Click to collapse
Had you created a backup with custom recovery?

Yes

ashesshubham said:
Yes
Click to expand...
Click to collapse
Ok. Which custom recovery did you use to create the backup?
Just boot into recovery and restore from the backup you created .

But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that

ashesshubham said:
But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that
Click to expand...
Click to collapse
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.

Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone

ashesshubham said:
Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone
Click to expand...
Click to collapse
No. But you will be able to download the OTA updates but it will not be installed on your phone.
Installing OTA updates require Stock Recovery.
You need to unlock your bootloader and then flash the stock recovery for your phone.

So how i install stock recovery bro pls tell

ashesshubham said:
So how i install stock recovery bro pls tell
Click to expand...
Click to collapse
Alright. I will upload the required tools and stock recovery by tomorrow evening.

Yes bro do that a great help bro pls upload bro and jusy post a rply a great help bro

How did you flash custom recovery with locked bootloader???
Sent from my A1 using XDA Free mobile app

Follow the instructions below.
1) Backup all your important data
2) Download the zip file from the attachment and extract it into a folder of your choice
3) Enable USB Debugging on your phone and connect it to your PC via USB cable
4) Open the folder where you extracted the downloaded attachment
5) Run "Unlock Bootloader.bat" file. Follow the on-screen instructions. This will unlock your bootloader and will factory reset your phone. Your phone will now reboot automatically.
6) Go to Settings >> About Phone >> Tap on Build Number 10 times >> Go back to Settings >> Developer Mode >> Allow USB Debugging . A pop-up message will appear on your screen asking you to confirm USB Debugging from your PC. Tap on Allow.
7) Now, connect your phone again by enabling USB Debugging mode.
8) Run "Recovery Installer.bat" from the extracted folder. Now, your phone has stock recovery (for Micromax Canvas A1). Your phone will now reboot automatically.
9) Again, Run "Lock Bootloader.bat" file from the extracted folder. This will relock your bootloader.
---------------------
Now, your bootloader is locked and you have stock recovery in your phone. You can confirm this by booting your phone into recovery.
Now, you'll be able to install the OTA Updates.
DONE!

Moreover the official image file here: Android One Stock Recovery.img (KitKat) can be used to flash the stock recovery from fastboot mode or using flashify app in rooted phone.

nope that dosent work
iremofaisal said:
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.
Click to expand...
Click to collapse
been there done that that but it can't install

[RECOVERY][TWRP 2.8.6.0] for Yureka ARM64[Flashable][Lollipop]

[RECOVERY][TWRP 2.8.6.0] for Yureka ARM64[Flashable][Lollipop]​
Hi guys,
Lollipop has arrived and there it goes the custom recovery for L !
This is TWRP touch recovery for Yureka and this should be flashed only on Lollipop build and not on Kitkat.
What works :
Everything
For now you have to do one extra work replacing a zip file in internal storage. I had to do this to fit it inside 20mb. This extra work will be solved eventually.
Downloads:
* 3.0.0.0 is available and check that out
Flashing Procedure : ( Read carefully )
Download this zip from here and open your Internal storage.
Create a folder named TWRP ( ignore if already the folder is there ). Now open TWRP folder and create a folder named "theme". Now copy the downloaded file ( ui.zip ) into the the theme folder. It should look like below. ( Picture shows SD card as well. But it's not necessary in SD ). The path will be like Internal storage/TWRP/theme/ui.zip
METHOD 1 :
1. Boot your phone into fastboot mode.
2. Then type this command fastboot -i 0x1ebf flash recovery recovery_yutwrp64.img
3. Reboot to recovery and enjoy.
METHOD 2 :
This method is applicable if you are rooted
1. Copy the recovery to SD card
2. Download Flashify tool from playstore
3. Choose install recovery and choose recovery via file manager.
4. Choose flash and reboot. Enjoy !
Should you have queries keep posted in thread and i will help.
ROOT ACCESS:
Additionally if you want to root your phone. Flash this supersu flashable zip by Chainfire and you should have root access
KERNEL SOURCE
XDA:DevDB Information
TWRP 2.8.6.0, ROM for the YU Yureka
Contributors
Santhosh M
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Stable
Current Stable Version: 2.8.6.0
Stable Release Date: 2015-04-17
Created 2015-04-17
Last Updated 2016-05-01

thanks for recovery
But method 2 is not working

Thank you Santhosh. It worked perfectly on CM12s.

==vj== said:
Thank you Santhosh. It worked perfectly on CM12s.
Click to expand...
Click to collapse
Thanks for the feedback. Much appreciated If possible please post it in Yu forums as 2-3 people say it doesn't work ( because of their mistakes ).

I am now trying, I hope everything goes well. BTW is it necessary to put that zip in TWRP/theme folder and what is that zip?

Yes it is very important or else u will encounter problem regarding user interface. U will be unable to flash.

RE-Boot Loop
Hey i tried all the steps.....but after flashing recovery it is going into a bootloop any fix for this....thanx in advance

nice_guy75 said:
I am now trying, I hope everything goes well. BTW is it necessary to put that zip in TWRP/theme folder and what is that zip?
Click to expand...
Click to collapse
Its stated in OP and hope it worked for you. If recovery worked for you do post back that it worked.
imgold007 said:
Hey i tried all the steps.....but after flashing recovery it is going into a bootloop any fix for this....thanx in advance
Click to expand...
Click to collapse
As simple as that. You have done something wrong ( I can't blindly guess )

works perfectly
tried flashing and works like a charm.
could you please also give a link to the stock recovery for 64 bit cm12 in case i want to revert.

Santhosh M said:
As simple as that. You have done something wrong ( I can't blindly guess )
Click to expand...
Click to collapse
Okay i might have screwed up the step where you make the folder.... so now what to do

Santhosh M said:
....This is TWRP touch recovery for Yureka and this should be flashed only on Lollipop build....
.....Additionally if you want to root your phone. Flash this supersu flashable zip by Chainfire and you should have root access....
Click to expand...
Click to collapse
is there no need to unlock bootloader etc., etc......? what's the procedure for an untampered stock phone?
does method 2 apply at all, since yours is the proven method of rooting?
i'm yet to come across any other method of successfully rooting yureka lollipop.
is it actually true that once you upgrade to lollipop there's no going back to kitkat and all those fancy custom roms?

m0han said:
is there no need to unlock bootloader etc., etc......? what's the procedure for an untampered stock phone?
does method 2 apply at all, since yours is the proven method of rooting?
i'm yet to come across any other method of successfully rooting yureka lollipop.
is it actually true that once you upgrade to lollipop there's no going back to kitkat and all those fancy custom roms?
Click to expand...
Click to collapse
Of course u need to be on unlocked BL. Second method is just to notify that in case someone has found some other method to root and if they are rooted they can use that method. ( I think there is no other method )

imgold007 said:
Okay i might have screwed up the step where you make the folder.... so now what to do
Click to expand...
Click to collapse
Do it correctly. What else

Santhosh M said:
Of course u need to be on unlocked BL. Second method is just to notify that in case someone has found some other method to root and if they are rooted they can use that method. ( I think there is no other method )
Click to expand...
Click to collapse
Means even if I was on rooted device before update still I have to unlock my bootloader once again after lollipop, I heard that if bootloader was unlocked once you don't have to unlock it again.

Santhosh M said:
Do it correctly. What else
Click to expand...
Click to collapse
Could you please mirror the img and zip files? Androidfilehost is not supported in my office network.

Santhosh M said:
Do it correctly. What else
Click to expand...
Click to collapse
But how can i.... it is rebooting before it reaches recovery... so cannot flash any zip... only fastboot is assessable...in short i have soft bricked my phone....
Any soln... steps to follow to unbrick it...thanx

imgold007 said:
But how can i.... it is rebooting before it reaches recovery... so cannot flash any zip... only fastboot is assessable...in short i have soft bricked my phone....
Any soln... steps to follow to unbrick it...thanx
Click to expand...
Click to collapse
Have you tried fastbooting the stock recovery?

sarkar1990 said:
Have you tried fastbooting the stock recovery?
Click to expand...
Click to collapse
No , was not able to find the file .... Stock recover for CM12 ....anybody link plz

nice_guy75 said:
Means even if I was on rooted device before update still I have to unlock my bootloader once again after lollipop, I heard that if bootloader was unlocked once you don't have to unlock it again.
Click to expand...
Click to collapse
no need to unlock again if you already unlocked,which you probably had:good:

Santhosh M said:
Of course u need to be on unlocked BL. Second method is just to notify that in case someone has ....
Click to expand...
Click to collapse
thanks for the answers to the first 2 parts. how about the 3rd? just wanna know if it's a one-way ticket to 'lollipopdom'.
btw, you might wanna edit the steps of method 1 to include unlocking bootloader too. would make it easier for users.

Unlocking bootloader and installing Custom recovery [Sprout4] [Marshmallow 6.0]

So i have successfully installed a custom recovery on my phone running Marshmallow and also unlocked the bootloader!
Its quite simple actually!
I am not responsible for any damage you make to your phone!
Steps-
1. Download the zip file from the link and extract it.
2. Install both the drivers and then proceed!(The drivers are universal and work for Windows 98,xp,vista,7,8,8.1,10 but in 8,8.1,10 you might need to turn off the digital signature verification-Make good use of google)
3.After installing the drivers , connect your phone in switched on and remember to turn on usb debugging in the dev options!
4. Open the unlock_bootloader_... and run the .bat file and follow the on screen steps( All the data will be formatted so make a backup beforehand)
5.After doing this you will void your warranty so make sure you know what you are doing!
6. Open the one click installer folder and replace the recovery.img with any recovery that you want.
7. Now again connect your phone in switched on mode and usb debugging on and run the .bat file of recovery installer.. and follow the on screen steps!
8.As soon as the the recovery installation is over do not let teh phone reboot just press the vol up button as the installation process stops and then go to recovery!
9.Boom!! Now you have a phone with unlocked bootloader and a custom recovery installed on marshmallow!!
10.Flash custom Kernels,Boot Animations, Logos and root your phone running marshmallow and brag!
Downloads--
Bootloader and Recovery.zip(27.4 MB)
Press Thanks:good: if this helped and if you have any querries just use the section below!

Recovery Kernel?
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:

How to open the unlock_bootloader ??? There is no such option

how about rooting? what method did you use?

bigrammy said:
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:
Click to expand...
Click to collapse
Actually i didn't work on the recovery, i just made the one click thing, i inserted any random recovery i found working on 6.0 .

cheeze.keyk said:
how about rooting? what method did you use?
Click to expand...
Click to collapse
i flashed a custom kernel and then the super su beta zip

akash.kotwani said:
How to open the unlock_bootloader ??? There is no such option
Click to expand...
Click to collapse
in the zip you will find a .bat file, open that and follow on screen instructions

How to relock bootloader if I ever want to?

net_freak said:
How to relock bootloader if I ever want to?
Click to expand...
Click to collapse
Well i did not make anything that can do that but you'll probably find it in other threads. You can also flash bootloader.using the stock rom file via sp flash tools to relock it just untick everything else but bootloader!

Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?

net_freak said:
Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?
Click to expand...
Click to collapse
You can but unlocking the bootloader opens up many other things for devs!

divyesh bansal said:
You can but unlocking the bootloader opens up many other things for devs!
Click to expand...
Click to collapse
Will the fastboot method to flash twrp work ? I'm on Android 6.0

net_freak said:
Will the fastboot method to flash twrp work ? I'm on Android 6.0
Click to expand...
Click to collapse
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!

divyesh bansal said:
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!
Click to expand...
Click to collapse
Thanks. . can I use all in one tool kit by @Faiyaz5yaz for the same

[recovery] twrp 3.0

Heya all~
Last thing we have got TWRP 2.8.7.0, and now we get TWRP 3.0 :victory:
The bad thing is... No material design and cant mount adoptable storage. Well, we dont need fancy design, we just need the function, isn't it?
Well, here are the download link (Flashable Zip)
https://www.androidfilehost.com/?fid=24438995911970726
How To Install via Flashtool
- Extract the zip
- Put the correct android scatter into 1 folder.
- For Android One rom use MT6580_Androidone_blablabla
- For Infinix Rom use MT6580_infinix_ROM_blablabla
- Flash it.
How to Install via Flashable Zip
- Go to TWRP (NOT STOCK RECOVERY)
- Just install the zip
- Reboot recovery
- Done.
Credits:
- Joseph Godslave (For the flashable zip )
- Jemmini (For compile this TWRP)
- All Infinix Hot 2 Android One Users
- bbs.infinixmobility.com
- And you

Reserved

Thanks ???

Can I flash it via fastboot?

Mysteryagr said:
Can I flash it via fastboot?
Click to expand...
Click to collapse
Yep.

RendyAK said:
Yep.
Click to expand...
Click to collapse
It failed
Sent from my Infinix X510 using XDA-Developers mobile app

Mysteryagr said:
It failed
Sent from my Infinix X510 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh, okay, just flash it via flashtool, the scatter file already there.

does not work with marshmallow 6.0 M android One 20160315

remedb said:
does not work with marshmallow 6.0 M android One 20160315
Click to expand...
Click to collapse
Please after install the recovery, then go to twrp, dont go to homescreen, becouse if you go to homescreen after install the recovery, system will replace the twrp with the stock one.
After you go to twrp, swipe to allow modification and reboot.

It worked for me on mashmallow....THANKS

Twrp recovery doesn't work with key combination. this is useless, still i can't restore my backup i bricked my phone hence i can't boot into recovery using rasher or mobile uncle tool as it's bricked already, now i need to boot into recovery with key combo but how is there any trwp recovery which works with key combo? Help will be highly appreciated

umar king said:
Twrp recovery doesn't work with key combination. this is useless, still i can't restore my backup i bricked my phone hence i can't boot into recovery using rasher or mobile uncle tool as it's bricked already, now i need to boot into recovery with key combo but how is there any trwp recovery which works with key combo? Help will be highly appreciated
Click to expand...
Click to collapse
Whoa, whoa, whoa.
You need to enable key combination first if yiu are in stock Android One (L/M) ROM!

RendyAK said:
Whoa, whoa, whoa.
You need to enable key combination first if yiu are in stock Android One (L/M) ROM!
Click to expand...
Click to collapse
I'm on stock infinix rom not Android one

umar king said:
I'm on stock infinix rom not Android one
Click to expand...
Click to collapse
Oh, ok.
The key combination: Power + Volume Up.
Dont flash it with mobile uncle tools, i think. That tools seems too old for this device :/

RendyAK said:
Oh, ok.
The key combination: Power + Volume Up.
Dont flash it with mobile uncle tools, i think. That tools seems too old for this device :/
Click to expand...
Click to collapse
Thanks
I did download twrp manager from play store and install twrp 3.0 now its working with key combination but i taped on keep read only option by mistake, will it be removed after i flash any custom rom?

You can easily install this using Flashify app.
Thanks, I'm sure everyone will need it.

[RECOVERY] [UNOFFICIAL] TWRP_3.0_m86_patched_st0rm77

** BRICK WARNING/Disclaimer/Requirements **
>> Only flash with unlocked bootloader <<
>> Scripts are released under GPlv2 license <<
>> Run at own risk <<
Hi,
I patched the TWRP 3.0 recovery from faust93 to include important partitions
that make switching between different versions of Android/Ubuntu very simple.
All partitions are properly added to the fstab, but out of fear that some of
you will brick your device i disabled most of them.
Next version will contain a backup of all unique partitions, but i will have
to test this thoroughly.
Steps to install:
1. Download the zip file from attachments below
2. Unpack the zip file
3. Check checksum with md5sum -c *.md5
4. Put phone into fastboot mode (boot device with [vol-] and [power] button)
5. Flash recovery with:
# fastboot flash recovery TWRP_3.0_m86_patched_st0rm77.img
# fastboot reboot
then boot the device with [vol+] and [power] button, to enter recovery
[Requested by @p82maarj]
Already on an older TWRP version ?
- Flash "update_TWRP_3.0_m86_patched_st0rm77.zip" from TWRP
or
- Unpack the zip and flash the recovery manually in TWRP by selecting "install image"
Enjoy
Warning:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **

Hi @st0rm77
Thanks for your contrubution!
It will be good if you create a flashable zip of your new recovery. It can be flashed directly from the stock recovery or from the other twrp recovery without entering in fastboot.
Furthermore to have a flashable zip is usefull to flash a new rom update. For updating the new rom version I enter in TWRP, flash rom zip, flash unlocked bootloader zip and flash TWRP zip.
I attach the other flashable TWRP zip you can based on (only replace recovery.img by your recovery.img).

Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)

Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?

PYCON said:
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
Click to expand...
Click to collapse
Yeah, you get some extra abilities:
- Backup of Boot Logo
- Backup of Device Tree
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.

Thanks for everything you've been releasing, great work!

st0rm77 said:
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Click to expand...
Click to collapse
Done Thanks!

st0rm77 said:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Click to expand...
Click to collapse
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!

Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?

PYCON said:
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
Click to expand...
Click to collapse
I know the answer to this one!
The first zip contains the img file that you can flash using fastboot.
The second (update) zip is the one you need if you already have (an older) TWRP and you wish to update to this version (use it from inside TWRP).

abePdIta said:
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Click to expand...
Click to collapse
boot.img is your boot partition, you need this one :good: (NEEDED)
bootloader is the locked bootloader from meizu, avoid this one as the plague (AVOID)
Dont brick your device, check everything carefully :fingers-crossed:

st0rm77 said:
Dont brick your device, check everything carefully :fingers-crossed:
Click to expand...
Click to collapse
Thank you very much! I will be careful in the future, I promise!

i follow the a to I tutorial
then unlock bootloader
then this
now when i conect meizu to pc i try to pass custom rom to internal memory and the phone restart
what is the problem
---------- Post added at 10:35 PM ---------- Previous post was at 09:56 PM ----------
managed to download the rom in phone browser now i have RR and all it´s ok

I flash stock recovery ( use update 5.1.10.0g) but not success, híc híc, help me restore stock recovery, many thanks!!!!

st0rm77 said:
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Click to expand...
Click to collapse
Just to be sure I understood :
Going from Flyme to CM :
-Backup Flyme (system+data+dtd)
-Flash CM archive
Going back to Flyme
-(optional) Backup CM (system+data+dtd)
-Restore Flyme (system+data+dtd)
Is there is a quikier way ?

TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:

help
hi .i change meizu pro 5 from china to national (5.6.1.19 daily )and unlock it and flash recover TWRP 3.0 but not login it the recovery .
i want updated

PYCON said:
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
Click to expand...
Click to collapse
I too vote for a port!

3.1.1 was released

munky-head said:
3.1.1 was released
Click to expand...
Click to collapse
Not for PRO5