Hello
I have an honor 4c. I have installed HiSuite. The device is recognized by computer. But the device either is absent from My Computer or is present but when I click on it I receive the message "There is no disk in the drive".
How can this problem be solved?
Dr.Ghobar said:
Hello
I have an honor 4c. I have installed HiSuite. The device is recognized by computer. But the device either is absent from My Computer or is present but when I click on it I receive the message "There is no disk in the drive".
How can this problem be solved?
Click to expand...
Click to collapse
I solved the problem the following way:
I changed the usb cable, and a page appeared on the phone's screen. Its title was Methods of Connecting USB. Its options was: MTP, HiSuite, Only Charge. By default, it was on "Only Charge". I changed it to "MTP". It opened on the PC and the problem was solved.
using another usb cable may solve ur problem
Dr.Ghobar said:
Hello
I have an honor 4c. I have installed HiSuite. The device is recognized by computer. But the device either is absent from My Computer or is present but when I click on it I receive the message "There is no disk in the drive".
How can this problem be solved?
Click to expand...
Click to collapse
May be a USB cable fault
Related
Bought a LG P970 Optimus Black.
Installed LGMobile Support Tool into my
Windows 7 64bit.
Installed the LG 3.2.1 drivers using LGMobile Support Tool.
Then, I connected the phone to the computer.
Result of drivers installation:
LGE Android Platform Composite USB Device - Ready to use
LGE Android Platform USB Modem - Failed
LGE Mass Storage Device - Failed
LGE Android Platform USB GPS NMEA Port (COM6) - Ready to use
LGE Android Platform USB Serial Port (COM7) - Ready to use
I wasn't planning to use the phone as a modem, so that driver does not worry me, but the USB storage problem is annoying.
In the phone, it does look as it connected. It offers the option to activate USB storage on screen, and if I click on the button, it says it enabled it, but nothing happens in the computer side.
I tested to uninstall everything LGE from the computer and restart from scratch, but same problem.
Ideas?
Update:
The LGMobile Support Tool in Windows says the phone IS connected, and that the software in the phone is up to date.
Do You see the phone into section computer like Removable Disc?
Matematiks said:
Do You see the phone into section computer like Removable Disc?
Click to expand...
Click to collapse
No. Nothing at all.
In "Devices and Printers" I have:
Under Devices:
LG Android Phone
LG Android (Modem)
LG Android (Serial)
LG Android (NMEA)
Under Unspecified:
LGE Bluetooth TransPort (COM4)
LGE Virtual Modem
In the "Device Manager" I have 1 "USB Mass Storage Device", with a yellow warning sign.
Under its Properties, in Device Status, it says: "This device cannot start. (Code 10)
If I try to "Update Driver" Windows says that the right driver is already installed.
FIXED !!
Updated LG driver to 3.5.
Still didn't work.
Then, I turned off the phone.
Removed the battery.
Put the battery back.
Turned on the phone.
Connected it to USB.
This time the USB driver started ok, and when I activated the USB storage I was able to see the drive under "Computer" in Windows Explorer.
I had turned the phone off and on before, so I think removing the battery did something that simply turning off and on wouldn't do.
dcardozo said:
Updated LG driver to 3.5.
Still didn't work.
Then, I turned off the phone.
Removed the battery.
Put the battery back.
Turned on the phone.
Connected it to USB.
This time the USB driver started ok, and when I activated the USB storage I was able to see the drive under "Computer" in Windows Explorer.
I had turned the phone off and on before, so I think removing the battery did something that simply turning off and on wouldn't do.
Click to expand...
Click to collapse
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
mastamindz said:
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
Click to expand...
Click to collapse
thanks for the trick, i hope this can be applied on my galaxy wonder,,
USB 3.0 External Storage Device driver not getting Installed- [Solved]
Issue: USB storage device is not working on my computer, be it a USB 2.0 or USB 3.0 it just doesn't install the driver for storage device and my USB mouse and webcam does work.Everytime I plug in a USB flash drive of USB 3.0 External hard drive it beeps and gives error message that the device driver could not be installed.
Here is the steps I took to troubleshoot this issue and it got fixed.
1.Open registry by going to Run-> Type Regedit.
and Navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
Highlight this key ({36FC9E60-C465-11CF-8056-444553540000} ), on the right pane, and then check if “Upperfilters” and “Lowerfilters” value are present. If so, please right click on the values and select "Delete" to remove them.
2. Now go to "C:\windows\inf" folder and check if these three files USBSTOR.SYS, usbstor.inf and usbstor.pnf are available.If it was renamed change the name as I wrote them or if they are not available copy them from "C:\windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3"
And then go to "C:\WINDOWS\SYSTEM32\Drivers" and make sure you have USBSTOR.SYS and usbd.sys available if not copy them again from
"C:\windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3"
and paste it to Drivers folder.
3. Open Registry editor by going to Run-> typing Regedit and Navigate to the following key:
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR" and ensure that the Start value is 3. and restart the system.
It will work..
thx
mastamindz said:
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
Click to expand...
Click to collapse
For me also worked ! I don't know why or how..but thx a lot! I was goin crazy because about few days ago it worked and suddenly it didn't but it all sorted out! Thanks!
hi, when Rocket Rom 7 (ics) came out, i installed it. after doing this, when i connected my phone to the pc, the system detects the phone as Samsung_android and shows 2 removable drives in the system. however, if you click on them they dont work
it no longer detects my phone as GT-N7000
what i have noticed: when i connect the usb cable, the phone doesnt show "MTP connection" anymore... instead, it shows USB connected.
what has been done:
flashed rocket rom 10, nogo
reinstalled kies: nogo
reinstalled win7 (yes i actually did that even tho testing on other pcs showed the same issue)
the phone still charges and the only way i can connect my phone to d pc to view files is by clicking "usb storage"
any advice on this?
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
dr.ketan said:
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
Click to expand...
Click to collapse
hi bro... didnt work... i dont think its the driver... its the phone... coz i tested another note, its working fine
My Galaxy Tab has similar issues. I believe it would be due to the architechture of the ROM forcing you to have to mount your device to your computer before being able to load the Device Internal SD, and the External SD.
Click USB Storage when it shows, this should pop up a window which has a Lil android dude, and USB Storage Message with a button stating 'Turn on USB Storage'. After clicking it, you can click 'Turn Off USB Storage' to unmount the device.
thanx for that.. hehe.. i stumbled across it the other day.. at least i can transfer files... but just dont like the fact its not showing...
I have been facing a strange problem since I updated my Nexus 6 to Android Marshmallow. When ever I am plugging the phone to my computer (Running Windows 7) using the usb cable, I am not being able to tranfer any files. Its showing a message which says that "The device has either stopped responding or has been disconnected". Any help on this will be really appreciated
adb driver already installed?
h20ray said:
adb driver already installed?
Click to expand...
Click to collapse
Yes. It shows that all drivers are installed correctly....In fact, the device also shows under device manager. Its just that no tranfer is possible between the phone and the computer
did you bring down notifications and change connection type to MTP?
In Marshmallow your connection to PC is in Charging Mode by default, you should bring down notifications select connection mode and change connection type to MTP(Media Transfer Protocol).
aliesz said:
In Marshmallow your connection to PC is in Charging Mode by default, you should bring down notifications select connection mode and change connection type to MTP(Media Transfer Protocol).
Click to expand...
Click to collapse
Thanks ......That helped
--- SOLVED see first post second page! ---
Hello XDA,
I am only able to read data on the phone when connected via USB on windows. On the phone itself I can change whatever I want ( Via ES-explorer for example) But in windows file explorer I can't. It will not tell me that I do not have proper writing rights, but instead just decides to freeze for 10 minutes everytime I try to make a file change, to eventually give me a beautiful
"windows explorer is not responding" pop-up
What I have tried :
-Rebooting,
-Reinstalling USB drivers,
-Switching USB debugging on and off,
-Reinstalling root,
-Installing the newest Oxygen OS update from February,
-used different cables (also an old micro USB with adapter) And nothing works.
This sucks because I was just trying to change my photography workflow from being Desktop based to being Android based..
Any suggestions ?
Greetings,
Thijs
www.instagram.com/thi_js
Edits: Clarify issue
i have the same problem be great to find a solution
Did you maybe noticed when this problem occurs to you? I know that one months ago it just did work. Should I reinstall Windows completely?
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
lorfo123 said:
I've been talking to a few people and it's happening to them to on Windows 10 I think it's just a bug from a recent update try a roll back
Click to expand...
Click to collapse
How should one file a bug-report for windows 10 then, this can't be something that shouldn't keep unnoticed by them.
Did rolling back fix something for you, and how did you do so?
I've checked another Windows 10 computer which hasn't been updated and it recognises my one plus 3T so if you Google / YouTube windows 10 roll back it should work
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
1asbak1 said:
Hmm this does suck. This means I cant be up to date on windows for now. Anybody have different suggestions?
Click to expand...
Click to collapse
The only other thing I could suggest is using a virtual machine to run win 7
Did you try back usb ports?. My pc with windows 10 fails with the front ports.
Solution
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
ayush2901 said:
Backup all the data in your internal memory and try the 'format data' option from twrp to wipe your internal storage. It could solve your problem, as it did in my case.
Click to expand...
Click to collapse
Which version of TWRP are you running? The thing is that If I afterward can't restore the data via USB haha, then the whole point of backing it up seems invalid
lorfo123 said:
New solution, just done works!
Plug in your phone and on the computer go to device manager (have phone in MTP mode)
you'll find the phone as a unknowen device
right click on this select "update driver software..."
a window will pop up select "browse my computer for driver softaware"
then on the next bit select "let me pick from a list of device drivers on my comupter"
then you will have a box with "MTP Device" and "MTP USB device"
select "MTP USB device" hit next and it should work 100%
Click to expand...
Click to collapse
This actually worked. Wauw.
Had to reboot a view times in order to get it in effect, nonetheless, THANKS let the creativity start again
Really,My A** is burnt while my phone showing messages to update,,, Fiunally donw..Thanks a lot...!!
super it works
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
picollo7 said:
This solution did not work for me. I am using W7 and OOS 5.0.3 rooted. Tried updating MTP drivers in W7, the phone shows up but no data shows in the drive. Still looking for a solution. Can someone please post W7 drivers that work for them? Thank you.
Click to expand...
Click to collapse
When you connect the phone to pc do you get a notification on your phone with the USB options?
DirkGently said:
When you connect the phone to pc do you get a notification on your phone with the USB options?
Click to expand...
Click to collapse
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
picollo7 said:
yes I can select charge, mtp, ptp, or midi
in device manager sometimes the phone shows up with error 10, device cannot start
tried many different driver versions in updating driver
Click to expand...
Click to collapse
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
DirkGently said:
I doubt there's much we can suggest that you haven't already tried. Try another cable/USB Port/uninstall device from Device Manager and let Windows find the driver. Hell, you probably did all that already.
Click to expand...
Click to collapse
Haha, yeah. Does anyone have links to the drivers that work for them?
Please help solve the problem with connecting the phone to the PC. After flashing the phone, I got a brick, I wanted to fix it, but after a while, when I connected USB to the PC, it says that the device is not recognized, I installed different drivers, deleted them, nothing helps. (Not only my phone is not connecting, I tried another one there too this error) Please help me solve this problem, I have been unable to fix my phone for several days
I presume that you're on Windows?
When you go to DeviceManager (devmgmt.msc) look for something with exclamation!
Properties > Details > Device instance path
What does it say?