I installed halogen kernel after this my wifi doesnt opening only bluetooth .gps and 3g
dimitrispas22 said:
I installed halogen kernel after this my wifi doesnt opening only bluetooth .gps and 3g
Click to expand...
Click to collapse
Halogen isn't for stock ROM.
Its for CM or AOSP.
If you're getting problems then just clean flash the ROM and then kernel.
There's no problem with the kernel.
I am on cm13 but i have problem with wifi after installing kernel
dimitrispas22 said:
I am on cm13 but i have problem with wifi after installing kernel
Click to expand...
Click to collapse
Don't know dude. Its working perfectly for me. Try a clean flash.
Related
Please help me the WIFI didn't work in my Stock ROM Zencefil V7 i don't know why???
i tried all the thing that i could even full wiped and factory formatted and Re-flashed the ROM 2 times and still not work!
when i turn it on!... its turn off automatically after seconds! i even go to settings and set to domain 14
PLEASE HELP??
I dont abt these rom but check threas op if any addon for wifi is required..
Coming Soon zencefil v7b for stock kernel.
Fixed Wi-fi.
Cheers
wifi problem
Pisculishi said:
Coming Soon zencefil v7b for stock kernel.
Fixed Wi-fi.
Cheers
Click to expand...
Click to collapse
my wifi is not turning on..using anastasia kernel and zencefil v7...
aravind009 said:
my wifi is not turning on..using anastasia kernel and zencefil v7...
Click to expand...
Click to collapse
go to advanced from the WIFI menu and change the Regulatory Domain value to 14
if still not work try the CM7.1 version ROM of the same developer. Sony CM 3 (wifi works)
click THANKS if i helped.
95mediatech said:
go to advanced from the WIFI menu and change the Regulatory Domain value to 14
if still not work try the CM7.1 version ROM of the same developer. Sony CM 3 (wifi works)
click THANKS if i helped.
Click to expand...
Click to collapse
I already tried that..SonyCM is for stock kernel right?Is there any way to fix wifi for custom kernel?
aravind009 said:
I already tried that..SonyCM is for stock kernel right?Is there any way to fix wifi for custom kernel?
Click to expand...
Click to collapse
I think u should ask in rom thread, he will answer u
Sent from my X8 using Tapatalk 2
you should flash the wifi modules for that kernel cause every kernel have its own set of wifi modules...
i have htc desire c with namelles rom v7 installed.i flashes the kernel from the explosion rom because i wanted to overclock my phone but with this kernel wifi is not working....i have tried to reflsh it but the problem presists....any ideas how to fix it?
gerrybezhani said:
i have htc desire c with namelles rom v7 installed.i flashes the kernel from the explosion rom because i wanted to overclock my phone but with this kernel wifi is not working....i have tried to reflsh it but the problem presists....any ideas how to fix it?
Click to expand...
Click to collapse
You cannot use the explosion rom OC kernel with Nameless as they have different modules. Just use fastboot to flash the boot.img found inside Namelessrom.zip to make wifi working again
uupps.. I did the same thing just to try, and wifi doesn't work even after pushing the original boot.img. Any guesses what could be the problem?
EDIT: after some sleep I realised I pushed the wrong kernel... now it works. Cheers Guys!
gerrybezhani said:
i have htc desire c with namelles rom v7 installed.i flashes the kernel from the explosion rom because i wanted to overclock my phone but with this kernel wifi is not working....i have tried to reflsh it but the problem presists....any ideas how to fix it?
Click to expand...
Click to collapse
You can use this method, it's perfectly stable, but read einstein.frat's comment about it.
http://forum.xda-developers.com/showthread.php?p=36335104#post36335104
I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
valery3212 said:
I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
Click to expand...
Click to collapse
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Poped said:
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Click to expand...
Click to collapse
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
valery3212 said:
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
Click to expand...
Click to collapse
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
Kernels are included in roms
Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
JJEgan said:
Kernels are included in roms
Click to expand...
Click to collapse
Sweet. Thanks for letting me know that. Sadly i love the customization-options with other kernels.
Edit: And can i just re-flash the rom to get other kernel w/o wipe? I meen since its the same ROM only...
valery3212 said:
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
Click to expand...
Click to collapse
Stock CM kernel, does that include customizations? Like cpu, UV, I/O and the ususal stuffs?
(and now i feel bad for basicly highjacking the thread... sry)
GOT it FIXED Thx everyone!
i just installed oc kernel by cocafe on maclow studio rom everything is pretty superb but only wifi is not turning on in anyway any one can help me!!!!!!!!!!!
You mean,you installed cocore kernel on cm11?
Sent from my GT-I9070 using XDA Premium 4 mobile app
walpanmad said:
i just installed oc kernel by cocafe on maclow studio rom everything is pretty superb but only wifi is not turning on in anyway any one can help me!!!!!!!!!!!
Click to expand...
Click to collapse
AltamashAN said:
You mean,you installed cocore kernel on cm11?
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I guess he installed the AOSP OC kernel from Alberto in maclaws CM 11.
As CM 11has wifi bug, sometimes reboot will give you wifi back. If reboot doesn't solve the problem, wiping cache solved the problem (at least temporary) for me.
rog_star said:
I guess he installed the AOSP OC kernel from Alberto in maclaws CM 11.
As CM 11has wifi bug, sometimes reboot will give you wifi back. If reboot doesn't solve the problem, wiping cache solved the problem (at least temporary) for me.
Click to expand...
Click to collapse
done all things wiped cache but wifi is not turning on i think maclow rom has 3.0.31 kernel and aosp has 3.0.101 kernel but is any way to enable it!!!!!!!!!!!
walpanmad said:
done all things wiped cache but wifi is not turning on i think maclow rom has 3.0.31 kernel and aosp has 3.0.101 kernel but is any way to enable it!!!!!!!!!!!
Click to expand...
Click to collapse
I have used maclaws CM 11 with the first 3.0.101 kernel (no OC) from AOSP without problems. But I am back to maclaws 3.0.31 kernel, because of more than 300 additional points in antutu (3.0.101: ~9500, 3.0.31: ~9850).
rog_star said:
I have used maclaws CM 11 with the first 3.0.101 kernel (no OC) from AOSP without problems. But I am back to maclaws 3.0.31 kernel, because of more than 300 additional points in antutu (3.0.101: ~9500, 3.0.31: ~9850).
Click to expand...
Click to collapse
ya i don't know whether benchmark affect performance
but on oc kernel my phone is flying no lag no stop just booooomb booooomb booooomb........
its directly visible in benchmark as u have seen in images
but there is some more battery drain and warming and no wifi issue
but i don't care because i want performance (i. e: no wait to open files, no lag while playing games because some third class phones like galaxy duos karbon a11 and like that runs faster than our sgs advance)
Wifi will not work because the wifi drivers are in the kernel, you changed the kernel so there are errors. Cocore is not compatible with cm because cm uses another kernel. So if you want wifi you have to switch to 4.1 and get cocore kernel and everything will be fine.
JBSK said:
Wifi will not work because the wifi drivers are in the kernel, you changed the kernel so there are errors. Cocore is not compatible with cm because cm uses another kernel. So if you want wifi you have to switch to 4.1 and get cocore kernel and everything will be fine.
Click to expand...
Click to collapse
my friend this is aosp supportable over clocked kernel by cocafe it can be usable on cm roms if it's stock based kernel then my phone will never boot and it goes to loop ha ha ha ha
walpanmad said:
ya i don't know whether benchmark affect performance
but on oc kernel my phone is flying no lag no stop just booooomb booooomb booooomb........
its directly visible in benchmark as u have seen in images
but there is some more battery drain and warming and no wifi issue
but i don't care because i want performance (i. e: no wait to open files, no lag while playing games because some third class phones like galaxy duos karbon a11 and like that runs faster than our sgs advance)
Click to expand...
Click to collapse
I have tested OC kernel in CM11. When I install OC kernel with UKF and replace system/lib/modules with the one from AOSP, I can not activate Wifi, no matter what I try to do :crying:
But when I replace boot.img and system/lib/modules in maclaws CM11 zip nad install that zip via CWM wifi is working.
rog_star said:
I have tested OC kernel in CM11. When I install OC kernel with UKF and replace system/lib/modules with the one from AOSP, I can not activate Wifi, no matter what I try to do :crying:
But when I replace boot.img and system/lib/modules in maclaws CM11 zip nad install that zip via CWM wifi is working.
Click to expand...
Click to collapse
its really true i had followed same and magic happened
my wifi is working, oc kernel working correctly everything thing is superb
but to make wifi working correctly u have to keep active " scanning always available"
rog_star said:
I have tested OC kernel in CM11. When I install OC kernel with UKF and replace system/lib/modules with the one from AOSP, I can not activate Wifi, no matter what I try to do :crying:
But when I replace boot.img and system/lib/modules in maclaws CM11 zip nad install that zip via CWM wifi is working.
Click to expand...
Click to collapse
Set permissions for the modules
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
LoizosAristides said:
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
win32r said:
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
Click to expand...
Click to collapse
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
LoizosAristides said:
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
Click to expand...
Click to collapse
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Oh I didn't know that it's based on the .266
Thanks man, I hope Williams kernel works
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Ok so I should've mentioned that my bl is unlocked...
Also, williams kernel v7 is for 4.3...
I'm trying to flash cm11, for cm11 there's williams kernel v4...
I tried both the stock cm11 kernel and williams one and they both gave me flickering screen...
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
win32r said:
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
Click to expand...
Click to collapse
Can you tell me what does it do?
LoizosAristides said:
Can you tell me what does it do?
Click to expand...
Click to collapse
It is fix flikers bug! :laugh:
win32r said:
It is fix flikers bug! :laugh:
Click to expand...
Click to collapse
Hmm I'll try it tomorrow
Thanks for helping me dude...
Forget it)
win32r said:
Forget it)
Click to expand...
Click to collapse
Ok so I tested it out today...and it doesn't work
I am now convinced that it's a kernel problem, since I tried a lot of different versions of cm11, but I also used 4 different kernels, each one at the latest version, NOTHING!
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
win32r said:
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
Click to expand...
Click to collapse
That's ok...
Thanks for your time anyway
As win32r said, you should try a cm11 based ROM but for locked bootloader (they work for ubl too). With these roms you can use a kernel based on stock ( for example stock kernel or Williams kernel Sony version) which should fix your issue.
All roms that are for LBL will work with the stock kernel or Williams kernel v7. I wrote something about this in the Williams kernel website : http://williams-kernel.tk/help.php and I'll probably write this info on xda too if I have some time.
Wow. Apparently, your kernel is the only one that that doesn't give me a flickering screen
I tried an unofficial cm11 build along with it and it worked like a charm!
I just can't thank you both enough...
Finally I got a fully working cm11 on my SP