I'm replacing the cracked screen on my phone. I'm farmiliar with the process, so disassembly and replacement will most definitely not be an issue. It's just that when i search for the part there seems to be 3 different kinds of screens, and, for the life of me, I can't seem to figure out which to purchase.
Any help would be very appreciated
Wwwyoutubecom/watch?v=C_iE6MpfoBo
Related
So, like many of you, I accidently cracked my lcd while it was in my pocket. Out of warranty, no insurance, and out of luck, I ordered a new one from the 8100blackberry parts people...
The screen replacement was really simple, but, now, I seem to have a new problem that I can't figure out. My phone seems to short out from time to time. One night, I was able to reproduce this by pressing on the left edge of the case, towards the bottom quarter of the screen. But, this is not always the case.
I've taken the phone apart 3 times trying to figure out what it could be, but there isn't anything I can find.
Anyone else had this problem? Any suggestions ???
Thanks,
-Tony
Hey,
Just looking for some advice where I should go for a cheap solution on how to fix my phone. Basically, everything still works great! Apart from the big crack, the screen doesn't seem to have been damaged (eg. All the pixels look fine, touch still works, only glass/plastic panel is cracked)
I'm actually really impressed by how it took such a hard hit and the device works fine, the screen didn't even smash! Basically it nudged in between my car seat where you close the door, didn't realise it fell out my pocket and closed the door (you could imagine it would be a hard hit) and the phone lives.
If I just needed the glass replaced, can it be done DIY? Or should I not bother and give it to a service centre? I got it from 3 but I know they'll probably overcharge me for something like this..
Any suggestions welcome, thanks!
if the damage is only to the exterior screen then you may want to consider getting this:
http://www.mobilefun.co.uk/product/17042.htm
be carful! the screen from my firlfreidns diamond is broken too and I had ordered one of those touchscreens... but the screen which comes has no "window" for the frontcamera and after disassembling the phone I saw that it is NOT POSSIBLE to remove the touchscreenglas from the frame.
Replacement LCD & Digitiser
I recently replaced an lcd and digitiser on a HTC Touch Diamond. I bought the complete screen (lcd & digitiser) as one pre-assembled unit from a guy on Ebay (£34.99). Fits straight into the front of the unit frame. I don't think you can remove just the digitiser because it is stuck onto the LCD, and the LCD itself is very fragile. Disassembly is fairly straight forward if you've got the right tools.
Thanks for all your help guys! I've just been bogged down with work so havn't been able to get back here for awhile.
I've taken some time to look into the webiste and others, decided to just order it off ebay in the end anyways. However, taking note from the previous 2 posts, would I be wasting my time ordering just the digitiser itself? I would assume that's what HerrVorragend also meant by "that it is NOT POSSIBLE to remove the touchscreenglas from the frame."
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Double posted, sorry.
badtzmaru56 said:
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Click to expand...
Click to collapse
If you google for HTC Diamond Service Manual, that will help greatly with assembly and disassembly - there are also a couple of videos on Youtube. From my experience the most tricky part is re-connecting the two flex connectors when you re-install the main board. I use the back of a pair of tweezers to slide underneath the connector carefully. If you are nervous about doing it and happy to cover postage costs, I can replace the LCD for you - PM me for details and I'll see what i can do.
Andy
So my touch all of a sudden stoped working. I tried everything including hard resseting. Then I noticed that at the top left corner, the screen was sticking out or something, it was much higher tan the surounding metal. When I tried peelinig it back I saw the underneath plastic of the diamond. So I stopped peeling it, and for some reason now, my screen is responsive again. Did my digitizer stick to my screen and unpeeling it unstuck or something. I'm worried I have a hardware problem I temporarily fixed. The top left area where the word htc is, is kind of wrinkly and not flat and taught like the rest of the screen like a piece of plasticd is on top of it or the plastic is disorted. It was that way before I tried to peel it back.
Definitely collapsed layers of the digitizer.
Does this mean I should get my digitizer replaced? I have the UK Diamond 2 so I am not sure where I would send it to get it fixed. Is this problem likely to happen again? And i'm a bit confused on why you said collapsed layers, does the digitizer have multiple layers?
it probs would be best to contact HTC UK customer services on their website. they will give you more information
how long have you had it, if less than a year then it may come under a warranty repair
but don't quote me on that.
supreme_one333 said:
Does this mean I should get my digitizer replaced? I have the UK Diamond 2 so I am not sure where I would send it to get it fixed. Is this problem likely to happen again? And i'm a bit confused on why you said collapsed layers, does the digitizer have multiple layers?
Click to expand...
Click to collapse
Search the forum for 'digitizer' or 'newton rings' to learn more about the issue. It does seem to be a common problem with the Topaz, but not so much with the Pure. Yes, it has 2 layers. There are also detailed replacement instructions if you search.
If I leave the problem as is since its working now, will the problem return or get worse? I bought it on ebay so I'm not sure I am under warrenty and the previous owner I believe got it in May 2009 so its been over a year. Also I did not have oily rings or anything visible on my screen when I had the problem. So I'm guessing my digitizer pieces got stuck as opposed to having Newton rings. Also could I send it somewhere besides HTC UK to get the digitizer fixed. I'm iff about replacing it myself especialy since it seems to require soldering.
supreme_one333 said:
If I leave the problem as is since its working now, will the problem return or get worse? I bought it on ebay so I'm not sure I am under warrenty and the previous owner I believe got it in May 2009 so its been over a year.
Click to expand...
Click to collapse
I suspect it will return. You may want to start searching for the part, I don't believe they cost too much, but you would do better to prepare of the worse.
Thanks. I checked ebay and their cheap, but I'm more concerned about installing it.
Hi guys, I have got my HTC One screen cracked recently and a few dents on the housing, nothing very noticeable but I like my One looking spotless additionally, I always wanted black one but at the time I was buying silver was the only one available I found a website where I can buy screen and housing. Could you please give me an advice or share your experience on screen replacement? thank you in advanced guys!
ekabon said:
Hi guys, I have got my HTC One screen cracked recently and a few dents on the housing, nothing very noticeable but I like my One looking spotless additionally, I always wanted black one but at the time I was buying silver was the only one available I found a website where I can buy screen and housing. Could you please give me an advice or share your experience on screen replacement? thank you in advanced guys!
Click to expand...
Click to collapse
on the i fix it take down it scored a very low score on repairable score
http://www.ifixit.com/Teardown/HTC+One+Teardown/13494
HTC One Repairability Score: One out of 10 (10 is easiest to repair)
Very, very difficult (possibly impossible?) to open the device without damaging the rear case. This makes every component extremely difficult to replace.
The battery is buried beneath the motherboard and adhered to the midframe, hindering its replacement.
The display assembly cannot be replaced without removing the rear case—this will make the most common repair, a damaged screen, nearly impossible.
Copper shielding on many components is difficult to remove and replace.
hope this helps
This user did just that and was happy with the results:
http://forum.xda-developers.com/showthread.php?t=2387992
I would contend that if you don't either have a lot of experience or a lot of time, patience, desire to learn and acceptance of the fact you'll probably destroy your phone, I'd give tearing down your HTC One a miss.
I'm pretty sure I can disassemble my phone carefully, I've read about it a lot and watched some videos, but the only think no one has mentioned so far is how to put it back together, using new housing. Cause I wonder if I need to use some glue or something?
Sent from my HTC One using Tapatalk
Hello everyone!
I bought a Xperia Z1 two weeks ago, and it was the best phone I have ever had.
However my idiot brother Managed to crack the Digitizer a few days back, the display is still working and the phone powers up but the touch panel is unresponsive.
(He was playing with one of those Heavy Snake Egg magnets, he threw the magnet into the air, and landed right on my phone. I'm surprised the Display is still working. )
Anyways, I was wondering if anyone here has replaced only the Touch Panel. I know on the Xperia Z1 its fused with the LCD, however with a machine like the Scotle PR-1000 its possible to separate the LCD from the touch panel.
Here is the link to a video showing the process: https://www.youtube.com/watch?v=h8bZi3FreMk
Now I have a few questions such as:
-With this method, wont the LCD display be scratched up as well?
-When I replace the touch screen with a new touch panel using this method, will it look normal? Or will it look like it has been opened and repaired?
-With a new digitizer, is the phone still waterproof capable? (I dont really care about the waterproof capabilities that much anyways.)
Thanks!
Can anyone help me?
You could just replace the entire display module, digitizer, LCD, and all. This would be the cleaner and easier way of replacing it with fewer potential problems. As far as waterproofing goes, I am not sure. Those are sort of uncharted waters (no pun intended) as far as repairs go. If I were you, I would assume not just to be on the safe side, until further knowledge presented itself. I hope this info helps!
FOr the past few days thats what I was thinking.
Especially since where I live most Cellphone "technicians" are just people with a very limited knowledge of electronics, and would most probably mess up the phone even further.
after placing a few calls to some shops I managed to find a replacement LCD+Digitizer+Frame, but I do not know how good the quality of the replacement unit would be.
Dear WEM97 and other users,
I have the same problem as Akash434. Could you please briefly elaborate on what the (potential) problem could be with just replacing the Digitizer. I can't really decide what to replace the LCD+Digitizer or only Digitizer. I understand replacing the whole LCD unit along is a far, far easier process. But cost wise it's also almost the double (atleast where i live).
Upon removing the Digitizer, should the old glue be removed (if any). What kind of glue should I use to stick the new Digitizer? Will u see that there was glue used? These are just a few questions I am struggling with.
Your help is greatly appreciated.
PS: I apologize for any grammar mistakes. English is not my native language.
you can't do this without a professional machine
https://www.youtube.com/watch?v=yMj-aWbttJk
This is my video and the description will send you to the links to fix it yourself
Otherwise get a shop to fix it... although most regular shops won't fix it... or get sony to fix it if you wanna continue your warranty
Place the phone on a heatable-3dprinter-bed and warme it up the temperature you want - digitizer was falling of the display last time i repaired my z1. I heated it up to disassemble. Now it is cracked again and i just don´t know how to glue the digitizer on... If i would change digitizer