Database Develop

[HOW TO] Fix LTE Issue with CM 12.1 based ROMs and Sprint as your carrier

This may fix jfltespr on the Sprint network always worked fine with LTE on most ROMs, but not with very many ROMs lately.
It seems that the APN had one slight difference between ROMs that worked with LTE for me (older CM, stock TW, GPE), and ROMs that had no LTE or eventually dropped LTE (CM12.1 based). The bearer was not set to LTE in the APN profile for the ROMs that do not work for me. Changing that quickly fixed the problem (figuring it out took me much longer). I looked around a bunch when I had this issue, and found people with the same issue, but no solutions. So, that's why I post this here now. Here's the How To if needed:
Go to Settings, Mobile Networks, Access Point Names, and Sprint LTE internet.
Scroll down to Bearer and see what it is set to. Mine was Unspecified, and that's what was causing the issue. Set Bearer to LTE
Go back to APNs, and also set Bearer to LTE on Sprint EHRPD internet. I know that's not the normally selected APN, but if you only change Sprint LTE Internet, it seems to automatically change to this EHRPD one, and it still doesn't work.
That's it for now. Enjoy your LTE again on 5.1.1. It seems to be much smoother.

I'm on an LG G3 but this APN/LTE issue seems to be affecting a lot of people on Android 5.1.x. I've been searching for solutions for days. Unfortunately, I have to report that your method did not work for me. With the Bearers changed to LTE I'm not getting any connection at all, but with them Unspecified I'll get a connection for a small time (<1min) after switching preferred network from 3G back to LTE before it drops again and gives me the exclamation point. If I leave it on 3G I have no problems retaining a 3G data connection. Nexus owners appear to be having this issue en masse with their 5.1.0 & 5.1.1 updates from google so it doesn't appear to be a CM issue, though CM had some APN related commits on July 1 that also seemed to cause problems for people and were undone by devs of some CM-based roms.

Yea that's a bummer. Thanks for sharing though. Maybe having it happen to so many people means that it will get fixed sooner than later, but I can only hope. I can only speak for the Sprint version of the S4 running on the Sprint network. It seems that people with this exact phone are okay on other networks.
This fix wasn't 100% for me either. Every once in-a-while, I think mostly in particular locations, it'll get stuck on the exclamation mark, and I'll just have to throw it into airplane mode for a moment.
If you haven't tried yet, make sure to put the bearers to LTE for all APNs that have the same DNS name as the normal one that you use, and the others at their defaults. It's probably not the case, but your results sound similar to mine when I only set one of the APN bearers to LTE. I thought that might be worth a mention, but I'm sure there are deeper problems. Sounds like you probably already did that anyway...

I've been having problems with this too and I tried your method but it didn't help me. It's really frustrating when there's so many great roms that are useless but thanks for trying though. Hopefully it gets resolved soon.

AOSP automatically selects the correct APN as long as the bearer is unspecified. You can hard code the bearer, but then that APN is only valid for that bearer. In other words, setting the eHRPD bearer to LTE will make that APN only valid for situations where the radio is connected to LTE. However, the connection will fail because the APN settings are wrong and the system will automatically move to the next APN with the bearer set to LTE. This time the connection will succeed because the next APN is the LTE APN. If you set the eHRPD bearer to LTE then you will never get a 3g connection.
What exactly are the symptoms you guys are seeing with LTE? My wife and I are both running CM with no connection problems whatsoever.

manardj1 said:
AOSP automatically selects the correct APN as long as the bearer is unspecified. You can hard code the bearer, but then that APN is only valid for that bearer. In other words, setting the eHRPD bearer to LTE will make that APN only valid for situations where the radio is connected to LTE. However, the connection will fail because the APN settings are wrong and the system will automatically move to the next APN with the bearer set to LTE. This time the connection will succeed because the next APN is the LTE APN. If you set the eHRPD bearer to LTE then you will never get a 3g connection.
What exactly are the symptoms you guys are seeing with LTE? My wife and I are both running CM with no connection problems whatsoever.
Click to expand...
Click to collapse
For me, I just randomly lose data connection, both 3G and LTE. It will then reconnect a few minutes later. I tried removing the other APN like the freedompop & ting leaving only sprint APNs thinking that might help but it I still lose data.

Irule305 said:
For me, I just randomly lose data connection, both 3G and LTE. It will then reconnect a few minutes later. I tried removing the other APN like the freedompop & ting leaving only sprint APNs thinking that might help but it I still lose data.
Click to expand...
Click to collapse
Do you get an explanation point?
Take a modem log right after you lose data and send it to me in a PM.

manardj1 said:
Do you get an explanation point?
Take a modem log right after you lose data and send it to me in a PM.
Click to expand...
Click to collapse
Yes, I get the exclamation point. I'm not on the CM right now because of the data issue but I'll flash it later tonight and post the log.

Irule305 said:
Yes, I get the exclamation point. I'm not on the CM right now because of the data issue but I'll flash it later tonight and post the log.
Click to expand...
Click to collapse
OK, cool. Don't post it here, it can have some private stuff in it like IMEI. PM it to me.

MMS ???
Hi. I am running CM12.1 and have tried other Lollipop roms. I am using Ting as my provider. I have two issues.
1. I don't get voicemail notifications. I can live with that.
2. Picture messages don't show. Texts come and go with no problem, just not picture (mms) texts.
Would these fixes help my issue? I have had no issues with 3g, which is most of my coverage area. I am usually on wifi anyway.
Thank you!

beezerhale said:
Hi. I am running CM12.1 and have tried other Lollipop roms. I am using Ting as my provider. I have two issues.
1. I don't get voicemail notifications. I can live with that.
2. Picture messages don't show. Texts come and go with no problem, just not picture (mms) texts.
Would these fixes help my issue? I have had no issues with 3g, which is most of my coverage area. I am usually on wifi anyway.
Thank you!
Click to expand...
Click to collapse
Cm12.1 ignores the voicemail notification from the carrier. The MMS issue is an incorrect/missing APN. If you can figure out what it should be we can get a patch submitted.

manardj1 said:
Cm12.1 ignores the voicemail notification from the carrier. The MMS issue is an incorrect/missing APN. If you can figure out what it should be we can get a patch submitted.
Click to expand...
Click to collapse
OK, it appears my data is not working, as well.
Is this what you need for a patch?
https://help.ting.com/hc/en-us/articles/205428698-GSM-Android-APN-Settings

beezerhale said:
Hi. I am running CM12.1 and have tried other Lollipop roms. I am using Ting as my provider. I have two issues.
1. I don't get voicemail notifications. I can live with that.
2. Picture messages don't show. Texts come and go with no problem, just not picture (mms) texts.
Would these fixes help my issue? I have had no issues with 3g, which is most of my coverage area. I am usually on wifi anyway.
Thank you!
Click to expand...
Click to collapse
beezerhale said:
OK, it appears my data is not working, as well.
Is this what you need for a patch?
https://help.ting.com/hc/en-us/articles/205428698-GSM-Android-APN-Settings
Click to expand...
Click to collapse
Here is a jfltespr build that fixes Ting data/MMS. I strongly recommend a clean install. If that's not possible, be sure to reset APNs to defaults after you flash and then reboot. It will take a minute or two to get data after the reboot. Please let me know how it goes. If this does fix it, I will submit the patch. If not, I still have some ideas.
Be sure to make a nandroid backup as I couldn't get my wife's S4 to test it with and this was the first time I have built for the S4 on this machine.
https://www.androidfilehost.com/?fid=24052804347780285
This build is up to date with CM sources as of last night.

I am downloading now and will try it tonight. I appreciate the quick work. I am on Octo now, but really prefer CM. I will clean install. Thank you!
manardj1 said:
Here is a jfltespr build that fixes Ting data/MMS. I strongly recommend a clean install. If that's not possible, be sure to reset APNs to defaults after you flash and then reboot. It will take a minute or two to get data after the reboot. Please let me know how it goes. If this does fix it, I will submit the patch. If not, I still have some ideas.
Be sure to make a nandroid backup as I couldn't get my wife's S4 to test it with and this was the first time I have built for the S4 on this machine.
https://www.androidfilehost.com/?fid=24052804347780285
This build is up to date with CM sources as of last night.
Click to expand...
Click to collapse

manardj1 said:
Here is a jfltespr build that fixes Ting data/MMS. I strongly recommend a clean install. If that's not possible, be sure to reset APNs to defaults after you flash and then reboot. It will take a minute or two to get data after the reboot. Please let me know how it goes. If this does fix it, I will submit the patch. If not, I still have some ideas.
Be sure to make a nandroid backup as I couldn't get my wife's S4 to test it with and this was the first time I have built for the S4 on this machine.
https://www.androidfilehost.com/?fid=24052804347780285
This build is up to date with CM sources as of last night.
Click to expand...
Click to collapse
I loaded it on and everything works except for mms. My 3g is good, wifi, texts, internet, calls ... just no pictures in texts. Something I noticed was different from the other CM12 versions is that now I can see that the text was sent, I just can't download it. I tried these settings from this page - I used the EHRPD settings. They were able to make mms work using the Octo rom.
https://help.ting.com/hc/communitie...-not-triband-update-to-Lollipop-?locale=en-us

beezerhale said:
I loaded it on and everything works except for mms. My 3g is good, wifi, texts, internet, calls ... just no pictures in texts. Something I noticed was different from the other CM12 versions is that now I can see that the text was sent, I just can't download it. I tried these settings from this page - I used the EHRPD settings. They were able to make mms work using the Octo rom.
https://help.ting.com/hc/communitie...-not-triband-update-to-Lollipop-?locale=en-us
Click to expand...
Click to collapse
MMS still doesn't work...no problem. I'll look at this link, make some more changes, and get back to you. A log might be helpful if you can.

manardj1 said:
AOSP automatically selects the correct APN as long as the bearer is unspecified. You can hard code the bearer, but then that APN is only valid for that bearer. In other words, setting the eHRPD bearer to LTE will make that APN only valid for situations where the radio is connected to LTE. However, the connection will fail because the APN settings are wrong and the system will automatically move to the next APN with the bearer set to LTE. This time the connection will succeed because the next APN is the LTE APN. If you set the eHRPD bearer to LTE then you will never get a 3g connection.
What exactly are the symptoms you guys are seeing with LTE? My wife and I are both running CM with no connection problems whatsoever.
Click to expand...
Click to collapse
I'm running cm12.1 nightlies with Freedompop as my carrier. This fixed my problem immediately.

bestiademon said:
I'm running cm12.1 nightlies with Freedompop as my carrier. This fixed my problem immediately.
Click to expand...
Click to collapse
What fixed your problem? Setting the 3g bearer to LTE? That means the freedompop LTE APN is wrong and should be patched in the code. If we could get more input on this we could fix it for good.

I don't even have anything listed in my APN (I used to). How do I fix that?

PwnCloud said:
I don't even have anything listed in my APN (I used to). How do I fix that?
Click to expand...
Click to collapse
Tap airplane mode, then tap again to turn airplane mode off. Then go into your APN menu. Your APN's should appear.
I'm running the latest CM 12.1 nightly. The stock APN's work for me, but I rarely get a LTE connection with them.
I've flashed the APN fix that's floating around, and it worked in older builds of CM 12, but recently the fix just disconnects and leaves me with no signal.
If I do what OP suggests, I'll get an LTE connection, but that leaves me with no 3G where LTE isn't strong.
I guess the problem with CM is that it cannot successfully switch between LTE and 3G correctly.
If you're not all that concerned about getting an LTE connection, I'd recommend just sticking with the stock APN's. Once you start flashing fixes, you're gonna have a problem.

Android 5.1.1. Update Disables Mobile Data (D5803)

Hello,
I recently updated my Z3 compact (D5803) to android 5.1.1. on the T-Mobile network here in NYC. Ever since then, I frequently lose the ability to do anything data-based with the phone. No web browing, no chatting on whatsapp. I can still make phone calls and send/receive SMS, however. The data functionality returns when on WiFi, but goes away once I switch back to LTE. In order for me to get data on LTE, I have to manually download the internet settings for my provider to my phone (this is located under the Settings menu in android). Even then, it only lasts for several minutes before the data connection is lost. T-Mobile was unable to fix the problem, and changing the SIM card didn't resolve the issue.
Anyone else experience this?

Yes, many others have the same problem, see various posts in this thread: http://forum.xda-developers.com/z3-compact/general/discussion-5-1-1-stock-released-post-t3162309
Currently, the best workaround seems to be to disable and re-enable mobile data, or to go to airplane mode and back again. That solves the issue until you drop LTE connection the next time, then you will have to re-iterate.

el_sur said:
Hello,
I recently updated my Z3 compact (D5803) to android 5.1.1. on the T-Mobile network here in NYC. Ever since then, I frequently lose the ability to do anything data-based with the phone. No web browing, no chatting on whatsapp. I can still make phone calls and send/receive SMS, however. The data functionality returns when on WiFi, but goes away once I switch back to LTE. In order for me to get data on LTE, I have to manually download the internet settings for my provider to my phone (this is located under the Settings menu in android). Even then, it only lasts for several minutes before the data connection is lost. T-Mobile was unable to fix the problem, and changing the SIM card didn't resolve the issue.
Anyone else experience this?
Click to expand...
Click to collapse
Yes I am having the exact same problem since updating to 5.1.1. As the other reply says turning airplane mode off then on is the quickest way to get connectivity back (swipe down twice from the top for quick access). This is terribly frustrating though, it only lasts for a few minutes. I can't believe they pushed the update with this issue!

jolindbe said:
Yes, many others have the same problem, see various posts in this thread: http://forum.xda-developers.com/z3-compact/general/discussion-5-1-1-stock-released-post-t3162309
Currently, the best workaround seems to be to disable and re-enable mobile data, or to go to airplane mode and back again. That solves the issue until you drop LTE connection the next time, then you will have to re-iterate.
Click to expand...
Click to collapse
My phone had this issue after the over the air update. I reset the phone to factory, wiped all data. Two days on, now, and no more problems with this.

Same problem. I tried factory reset out of desperation, but it didn't work.
Love this phone, but very discouraged by this bug.
(I'm on t-mobile in Seattle, fwiw)

Funkmonk said:
Same problem. I tried factory reset out of desperation, but it didn't work.
Love this phone, but very discouraged by this bug.
(I'm on t-mobile in Seattle, fwiw)
Click to expand...
Click to collapse
As posted in the other thread, there is now a fix/workaround:
From reddit user FishStik5: Going into the APN settings and changing the APN protocol to iPv4 only (it was iPv6 before) seems to fix the problem.
How to find the setting: Settings-> Wirelessa and Network / more -> Mobile networks -> APN -> T-mobile data -> APN protocol -> Set to IPv4.

jolindbe said:
As posted in the other thread, there is now a fix/workaround:
From reddit user FishStik5: Going into the APN settings and changing the APN protocol to iPv4 only (it was iPv6 before) seems to fix the problem.
How to find the setting: Settings-> Wirelessa and Network / more -> Mobile networks -> APN -> T-mobile data -> APN protocol -> Set to IPv4.
Click to expand...
Click to collapse
Looks like this worked for me (T-mobile, San Francisco area). Thanks for posting this

i'm having the same problem and didn't work for my the ipv4. still loosing data, i have to reboot the phone

I have also problem with that (Orange, Poland). I sent my phone to official Sony service, they reload the software, but I still have that problem. Lte is working for a while and when my phone switches to wcdma (because it is not in a range of lte) it is not working either. However, when I change the preferred network from lte to wcdma it is working without any issues.

Same problem here although I'm on ipv4 [emoji34]
Sent from my Z3 Compact

I thınk you shouldnt buy operator phones. Buy ınternatıonal models next tıme

Mine isn't an operator model, I'm using Straight Talk and also have the issue. It made my phone useless....I almost never have data

This worked for me
This worked on my Doogee Valencia2 Y100Pro
Install and Open app "Hidden Android Settings" (by 0Alex)
Select choose and open "RadioInfo"
Move to Last option "TOGGLE DNS CHECK"
mine read "0.0.0.0 not allowed"
press the "TOGGLE DNS CHECK" so that it displays "0.0.0.0 Allowed"
That's it - my mobile data worked, I hope it works for yo

Aenyee said:
I have also problem with that (Orange, Poland). I sent my phone to official Sony service, they reload the software, but I still have that problem. Lte is working for a while and when my phone switches to wcdma (because it is not in a range of lte) it is not working either. However, when I change the preferred network from lte to wcdma it is working without any issues.
Click to expand...
Click to collapse
1. Change "APN Protocol" to IPv4
2. Change "APN Type" to: "default,supl" only
3. Change "APN" to "internet"
4. Save.
Best, Martin.

elvakin said:
Looks like this worked for me (T-mobile, San Francisco area). Thanks for posting this
Click to expand...
Click to collapse
this is a bug on 5.1.1 sony need to fix it

Any news with this issue?

No problem here with LTE on the CM 12.1 Cyanogenmod flavor of 5.1.1 on T-mobile (that I've noticed at least). But I think CM 12.1 may handle the APN settings differently (mine is set to T-Mobile LTE ipV4) from the stock ROM or it could be something Sony messed up from the AOSP code. I'm NOT suggesting anyone try a CM ROM as a solution as there are lots of downsides to unlocking your phone and flashing any non-stock ROM. But the problem does seem to be specific to the Sony ROM and not 5.1.1 in general.

I also have this problem after the update to 5.1.1 in the Netherlands. The first problem was that the update changed some mobile data settings, so I downloaded the settings from my provider. Unfortunately those settings were also incorrect as I had to manually remove the APN's Proxy and Port (they were set, be needed to be 'not set'/empty). This improved the connection a bit, but it still looses the mobile data at certain places (where the coverage is good). Did a factory reset as the Sony helpdesk suggested. For a few days this seemed to help, but again the same issue came up. The suggested solution mentioned in this thread did not work as those settings are already applied.
I have a profider (Telfort) which uses another provider's network (KPN's). So after the update I also see a annoying R in the signal icon, where in the previous version it always showed H+, H, 3G.
Does anyone know if this is resolved in the new update?

After the last update and a new reconfiguracion on the APN now work correct for me.

bracima said:
After the last update and a new reconfiguracion on the APN now work correct for me.
Click to expand...
Click to collapse
And which version are you on? 23.4.A.1.200 or 23.4.A.1.232?

6.0 update and issues

Hello,
I am using Sprint LG G4 in Pakistan and after 6.0 update my mobile internet stopped working. I have only two option available in network mode LTE/CDMA or CMDA and none on one is checked if I clicked anyone my mobile operator signal went off. Also battery is draining so fast, I need to charge phone twice in a day. software version is LS991ZVB. Any help would be highly appreciated
Regards
Imran

Also I am getting these option when I go into mobile networks link no gsm or global and phone is not detecting my sim. Please can anybody help me and tell me the solution?
imk79 said:
Hello,
I am using Sprint LG G4 in Pakistan and after 6.0 update my mobile internet stopped working. I have only two option available in network mode LTE/CDMA or CMDA and none on one is checked if I clicked anyone my mobile operator signal went off. Also battery is draining so fast, I need to charge phone twice in a day. software version is LS991ZVB. Any help would be highly appreciated
Regards
Imran
Click to expand...
Click to collapse

Unfortunately, there is no way to rollback to older versions from ZVB.
For data to get working, you will probably need root access to reset the APN from APN settings. Sadly no root yet for MM, i believe.
See if you can access IotHiddenMenuMain in any way. It usually doesnt require root. If success, go to APN settings and reset to default APN.
Start with the shortcut master app.
Best of luck.

imk79 said:
Also I am getting these option when I go into mobile networks link no gsm or global and phone is not detecting my sim. Please can anybody help me and tell me the solution?
Click to expand...
Click to collapse
Its normal if you're out of USA, the ZVB update screwup all unlocked sprint LG G4 phones. The only solution is flash this:
http://forum.xda-developers.com/sprint-g4/development/rom-mellowmallow-debloated-60fps-camera-t3358340
After you flash Mellowmallow rom, you have to do a factory reset to acceso a gsm network, use the global version.

How Can I Flash it as above "evilboygenius" Said that I can't root my g4 or ZVB? Can you please guide the process or refer to any thread where it is explained?
Many Thanks

Sprint LG G4 Network Solution
imk79 said:
Hello,
I am using Sprint LG G4 in Pakistan and after 6.0 update my mobile internet stopped working. I have only two option available in network mode LTE/CDMA or CMDA and none on one is checked if I clicked anyone my mobile operator signal went off. Also battery is draining so fast, I need to charge phone twice in a day. software version is LS991ZVB. Any help would be highly appreciated
Regards
Imran
Click to expand...
Click to collapse
I have purchased the same sprint LG G4 (LS991ZVB) and updated it to latest Marshmallow 6.0 including other mini security updates too. I was having the same problem. After selecting the LTE or CDMA losing the signal.
Here is the solution:
1. If you lost the signal after pressing the LTE/CDMA or CDMA
Go to settings>General>Backup&reset>Network setting reset.
you will have your signal back
2. You can use 3G internet services of any network. just need to fill the APN setting manually.
Go to settings>Network>Mobile data>Mobile Networks>Access point Name
Now add APN (only interent settings. ignore the mms or gprs settings)
Here is the link of all Pakistani networks APN settings.
As i am a new user. I am not allowed to give outside link. However I have sent you link for APN & my contact number in private message.
Now you can use 3G internet. :good:

T-Mobile WiFi Calling "Data service is blocked"

I just ported my number from Verizon to T-Mobile and they don't have service at my house (neither did Verizon). I'm trying to activate WiFi calling but I frequently get the message "Data service is blocked" from "Phone Services". I'm on latest Pure Nexus but I'm not sure if ROM has anything to do with it. I called T-Mobile and they did a network refresh but the issue is still persisting. Wondering if anyone else came across this and what fixed it?

This is from the PN thread:
ProBird79 said:
I have figured out the WIFI calling problem. If you delete the "T-Mobile IMS" APN it will neuter your WIFI calling. This APN isn't selected and I wasn't aware that you needed it since the standard "fast.t-mobile.com" APN is selected. I'm not sure if this is only within this ROM or widespread. Also, I'm wondering if this is the reason VoLTE hasn't been working. I don't have anyone to call at the moment to test this out but I will report back once I find out.
This was hard to find as it changes after a reboot and not instantaneously. So even though I didn't change anything I rebooted then the problem persisted.
Edit: Also, you must have to use the phone app within the ROM and not the Google Phone app or WIFI calling seems to break.
Edit #2: This was also the reason VoLTE wasn't working. All is good now!
Click to expand...
Click to collapse
pipper0419 said:
The above solution worked for me after I tweaked the APN settings from this post: https://forum.xda-developers.com/nexus-6p/help/getting-volte-wifi-calling-to-metro-pcs-t3284024 post #4
After that, the T-Mobile IMS" APN was listed and I deleted both entries for IMS. Once that was done, T-Mobile Wifi Calling was back!!
Click to expand...
Click to collapse

Unlocked US Note 9 loosing mobile network

Hey All,
I just got an unlocked US version could silver note 9. I am on N960U1UEU1AEL1 firmware and T-Mobile network. I seem to have an issue where the phone is dropping connection. It shows the LTE icon in the task bar but I cant connect to the internet. I have to restart the phone in order for it to connect. It seem to be tied to a wifi or something along those lines. If I connect to a wifi then walk away from it, the phone has trouble picking a tower but it shows that I am connected to LTE. I tried adding new APN settings but it defaults to the T-Mobile APN. Do I really need to flash TMB firmware, I really liked the unlocked version without all the bloat. All help is appreciated.

megaforcer said:
Hey All,
I just got an unlocked US version could silver note 9. I am on N960U1UEU1AEL1 firmware and T-Mobile network. I seem to have an issue where the phone is dropping connection. It shows the LTE icon in the task bar but I cant connect to the internet. I have to restart the phone in order for it to connect. It seem to be tied to a wifi or something along those lines. If I connect to a wifi then walk away from it, the phone has trouble picking a tower but it shows that I am connected to LTE. I tried adding new APN settings but it defaults to the T-Mobile APN. Do I really need to flash TMB firmware, I really liked the unlocked version without all the bloat. All help is appreciated.
Click to expand...
Click to collapse
That Baseband or Software version doesn't sound right. AEL1 isn't a version I see that was released.. All Unlocked software versions are AR**. Double check that.
Sent from my [device_name] using XDA-Developers Legacy app

Sorry, I just made a typo, it does end with ARL1.

megaforcer said:
Sorry, I just made a typo, it does end with ARL1.
Click to expand...
Click to collapse
Have you tried resetting the network settings? That's where I would start. Could be a bug with your software. If that doesn't work try rebooting the phone into recovery mode and wiping the cache partition the reboot. If that doesn't work back up your data then factory wipe the phone.
Sent from my [device_name] using XDA-Developers Legacy app

I haven't tried resetting the phone yet. This is my first phone that is not rooted and I started using Blokada from day one. I wonder if Blokada is causing this, hmmmm.

Ok, I did some more research and it sppears to be an issue with Blokada version 3.6.