I was hoping that I could get some insight here on the Nexus forum for an issue I'm having w/ xposed. I did post this over there but the thread for snapprefs has been closed. Any insight would be appreciated.
I cannot get snapprefs working in snapchat. I have been trying to get this to work for the last couple of days w/ no luck. I am running about 8 other modules in xposed w/ no issues. The first time I started from scratch yesterday, I removed all modules & only have snapprefs enabled currently. But what I have tried is completely removing xposed/installer (Framework: xposed-v80-sdk23-arm/installer: 3.0 alpha4) & both apps then starting from scratch. Even using past versions of SP & SC made no difference. I am attaching a logcat from xposed. The only other things worth mentioning is that my device is encrypted & I am not running a current version of Pure Nexus(I'm on ver-6.0.1-20160103 w/ stock kernal)but I wouldn't think these would make a difference since my other modules are working. So any help would be appreciated. Let me know if more information is needed.
Thanks!!
The thread was closed because any question you may have has already been answered. Snapprefs works fine on mine. Every rom I have have tried. Mind you I don't have mine encrypted as there really is no point.
Your issue from that log is the wrong version of Snapchat. The last version supported Is 9.21.1. So you will have to use that version and not update.
Also do not post the same thing across different threads.
Had you followed directions you would have been fine.
zelendel said:
The thread was closed because any question you may have has already been answered. Snapprefs works fine on mine. Every rom I have have tried. Mind you I don't have mine encrypted as there really is no point.
Your issue from that log is the wrong version of Snapchat. The last version supported Is 9.21.1. So you will have to use that version and not update.
Also do not post the same thing across different threads.
Had you followed directions you would have been fine.
Click to expand...
Click to collapse
Thank you, zelendel & sincere apologies man. I can't believe I overlooked that. Such an easy fix. Doh!
I don't use Snapchat but when I set it up for a friend I had an issue. If you have xposed framework installed, Snapchat will not login. You have to flash the xposed uninstaller in recovery. Then reboot and login to Snapchat. Once you successfully login then reboot and reinstall xposed and you will be good to re set up your other modules and snapprefs. Just a heads up and good luck.
bghouse10 said:
Thank you, zelendel & sincere apologies man. I can't believe I overlooked that. Such an easy fix. Doh!
Click to expand...
Click to collapse
No prob, but to be honest it's questions like that the dev had me close the thread.
Glad you got it working.
I completely understand & feel like a tool cuz I get annoyed when I come across it on the forum. I have been a member for a few years & not that anyone wants to look at my history but if you did, the few posts that I have made, were made after much reading, searching & as relevant as possible. Won't happen again. Thanks!
Related
Cheers.
I have recently updated my module http://repo.xposed.info/module/com.ceco.sbdp
and users reported new version cannot be downloaded. I am experiencing the same issue.
Already tried to remove the update and re-add it but with no success.
I wonder if it's a general/temporary issue or it has something to do with my APK?
Yes, there are some issues with the download server at the moment. Access to the file system is very, very slow. That seems to be causing issues with synchronizing new files as well. The server admin is already aware of it, but it's night time in the US.
We have set up public status pages so you can see whether it's something on your side or a general issue:
Repository (website and module index)
Download server (APKs)
Still looking for a good place to put these, another sticky thread seems to be too much.
Maybe you could implement to web interface another field for "Alternative download link" in case of server troubles (since there are often ones last time). So developers could add mirror of release.
This has happened 3 times for me in the past 2 weeks... I thought it was just me again.
Glad to see it isn't, not glad to see there isn't a mirror Thankfully I backed up my modules on Titanium Backup. But was looking forward to update, guess I'll wait for 'em.
Ok, it's not just me.
I was trying to update some modules and install 2 new ones. I was thinking my wifi router needed to be reset.
At first I thought the problem was from my phone but after seeing that other person has the same issue, i understoud that its the xposed server.
Thanks for informations and i hope that this problem will be fix in little time..
rovo89 said:
We have set up public status pages so you can see whether it's something on your side or a general issue:
Repository (website and module index)
Download server (APKs)
Still looking for a good place to put these, another sticky thread seems to be too much.
Click to expand...
Click to collapse
How about http://repo.xposed.info/ start page?
Repo BACK!
Sent by me from my Z2.
Still cant access the repo from my phone...just getting a blank page.
Same here. Gonna have to download the apks from the website instead.
rovo89 said:
Yes, there are some issues with the download server at the moment. Access to the file system is very, very slow. That seems to be causing issues with synchronizing new files as well. The server admin is already aware of it, but it's night time in the US.
We have set up public status pages so you can see whether it's something on your side or a general issue:
Repository (website and module index)
Download server (APKs)
Still looking for a good place to put these, another sticky thread seems to be too much.
Click to expand...
Click to collapse
hey @rovo89
i just installed your gravity exposed on 4.4.2 android phone .. why all my icons are changed??? wth ?
i want them back as they were ...
why u not responding rovo u feeling guilty ?
Simona Simmy said:
hey rovo89
i just installed your gravity exposed on 4.4.2 android phone .. why all my icons are changed??? wth ?
i want them back as they were ...
Click to expand...
Click to collapse
Simona Simmy said:
why u not responding rovo u feeling guilty ?
Click to expand...
Click to collapse
He's not responding because you're asking in completely the wrong place. He isn't responsible for every Xposed module and even if he was this thread is in no way related to that.
I suggest you find the correct thread for GravityBox and ask in there, but only after you read the first post of the thread and make sure your device is supported by GravityBox.
Edit - Going by your post history, your device isn't supported by GravityBox, so if you're having issues then you'll either have to live with them or uninstall it as the developer won't make adjustments for your device.
Sent from my C6603
Simona Simmy said:
hey @rovo89
i just installed your gravity exposed on 4.4.2 android phone .. why all my icons are changed??? wth ?
i want them back as they were ...
Click to expand...
Click to collapse
kingvortex said:
He's not responding because you're asking in completely the wrong place. He isn't responsible for every Xposed module.
I suggest you find the correct thread for GravityBox and ask in there, but only after you read the first post of the thread and make sure your device is supported by GravityBox.
Sent from my C6603
Click to expand...
Click to collapse
This sometimes happens after installing xposed framework without enabling any module on some "special" devices. So it's maybe the case. But it doesn't change anything on the fact it's still off topic ,though.
C3C076 said:
This sometimes happens after installing xposed framework without enabling any module on some "special" devices. So it's maybe the case. But it doesn't change anything on the fact it's still off topic ,though.
Click to expand...
Click to collapse
Hmm. I don't have any experience with any device from Huawei or other Chinese OEMs so wasn't aware of that. It seems they all like to mess with Android's framework etc for little gain from what I read about them.
I thought it only occurred after activating GravityBox though, as they mentioned "gravity".
Oh well, back on topic.
Sent from my C6603
kingvortex said:
He's not responding because you're asking in completely the wrong place. He isn't responsible for every Xposed module and even if he was this thread is in no way related to that.
I suggest you find the correct thread for GravityBox and ask in there, but only after you read the first post of the thread and make sure your device is supported by GravityBox.
Edit - Going by your post history, your device isn't supported by GravityBox, so if you're having issues then you'll either have to live with them or uninstall it as the developer won't make adjustments for your device.
Sent from my C6603
Click to expand...
Click to collapse
men that is HIS PROBLEM as he on PURPOSE blocked private msgs.. so i had to ask him this way !
and i know about gravity box.. but i want install g-box without xposed installer ..
---------- Post added at 08:34 PM ---------- Previous post was at 08:32 PM ----------
C3C076 said:
This sometimes happens after installing xposed framework without enabling any module on some "special" devices. So it's maybe the case. But it doesn't change anything on the fact it's still off topic ,though.
Click to expand...
Click to collapse
well it happens actualy onc eu install active .. so after activation all goes sht .. tried put theme back no help..
well there is no way to catch him .. why he is hiding ? dunno.. so i searched where he posted and i just wrote..
---------- Post added at 08:37 PM ---------- Previous post was at 08:34 PM ----------
kingvortex said:
Hmm. I don't have any experience with any device from Huawei or other Chinese OEMs so wasn't aware of that. It seems they all like to mess with Android's framework etc for little gain from what I read about them.
I thought it only occurred after activating GravityBox though, as they mentioned "gravity".
Oh well, back on topic.
Sent from my C6603
Click to expand...
Click to collapse
it completelly f-up my honor 6 ! i uninstalled al that crap and applied default theme ..but that sht is back with f up icons .. after reboot.. jeess christ.. it not possible to rid of it..
He probably blocked private messages because of people bombarding him with hundreds of questions. Posting off topic stuff in an unrelated thread isn't the way to go about this.
You're using a device from a Chinese OEM that has modified Android, causing these unexpected results.
Let's get this clear: Is your problem with GravityBox or does it happen with only the Xposed framework and no other modules installed?
If with only Xposed installed, then read the FAQ thread and see if your problem is mentioned in there. If not, you should be OK creating a thread in this section to ask for help.
If your problem is with GravityBox, then either live with it or uninstall it. Those are the only choices.
In either case, we should stop filling this unrelated thread with off topic stuff.
Sent from my C6603
kingvortex said:
Let's get this clear: Is your problem with GravityBox or does it happen with only the Xposed framework and no other modules installed?
Click to expand...
Click to collapse
A quick Google search yielded some results saying that device comes with some kind of a theme engine which gets broken after xposed framework installation without any module active. A workaround is to "disable resource hooks" in xposed installer settings but many modules won't work with those hooks disabled. Including GravityBox.
Why from yesterday in xposed download list,there is no update of apps???
But,i can see those uodates/new modules only in repi
O.xposed.com web page!! Why not shows in app??
Sent from my Lenovo A3000-H
Q&A for xt1254 21.44.12 quark .img With root,adblock and Audio Patch
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for xt1254 21.44.12 quark .img With root,adblock and Audio Patch. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flashing 1.2 as we speak.
I'll try to update when the process is finished.
Hope you all guys enjoy the volume boost and all the features @computerfreek274 zipped for you!
Verizon bloatware removal
Hi!
Thanks for your work.
By the way, did you remove all the verizon bloat?
I`m outside the US, so there is no need for me to use it.
SuperSU Update
I installed your rom (thanks!) and SuperSU is saying that I need to update it, but when I try it fails and keeps putting a notification in the notification area. Is there a way to update the binary so it stops doing this?
EDIT: nvm work firewall was the issue.
1.5
I've been reading and trying to follow.. I have a turbo, with 21.44.12
Am I correct to say, that if I follow the root process and just replace the img file with the 1.5 img. I'm good? Is there a walk through? I'd really like to get rid of all the bloatware.
Are there any quirks with the 1.5 version?
root and lolllipop
Sorry if this question is in wrong section. New to this forum/have not re visited in awhile. I have the new phone all set up with my new apps etc. Do I have to wipe to install root with adblock (1.52) or can I just download and go? Also, should I wait until I get OTA Lollipop 5.1 and then see where new updates are? Thanks. (more knowledgeable than most smartphone peops but definitely a green pea compared to you guys!)
---------- Post added at 07:53 PM ---------- Previous post was at 07:09 PM ----------
Sorry if this question is in wrong section. New to this forum/have not re visited in awhile. I have the new phone all set up with my new apps etc. Do I have to wipe to install root with adblock (1.52) or can I just download and go? Also, should I wait until I get OTA Lollipop 5.1 and then see where new updates are? Thanks. (more knowledgeable than most smartphone peops but definitely a green pea compared to you guys!)
The newest flash is great but you removed verizon visual voicemail and I cannot seem to get any version of this apps APK files to install since then. Even at the store.
Can you please let visual voicemail be an allowed app because this is not bloatware to some people, thanks!
Rumsfield said:
The newest flash is great but you removed verizon visual voicemail and I cannot seem to get any version of this apps APK files to install since then. Even at the store.
Can you please let visual voicemail be an allowed app because this is not bloatware to some people, thanks!
Click to expand...
Click to collapse
All fixed in 1.5.2.a Thanks.
Thanks! Just flashed the newest a few minutes ago and it works great. I can finally use WiFi tether with my unlimited plan!
Pandora Freezing
@computerfreek274 Thanks for all the hard work, loving my rooted Turbo!! I have always rooted my devices but I have never run adblock. I downloaded and flashed 1.5.2a without issue. Everything seems to be working OK except Pandora Radio. Whenever an Ad should be played it causes app to freeze and force close. Not sure if this is normal for Adblock build. Any help would be awesome!! Thanks in advance.
computerfreek274 said:
All fixed in 1.5.2.a Thanks.
Click to expand...
Click to collapse
Thanks a lot! So far so good, you are doing an excellent job with your builds.
Thanks for all your hard work. I made a donation to you to show my appreciation. Other people who are using this should consider doing the same.
Thanks
DROIDturbo said:
@computerfreek274 Thanks for all the hard work, loving my rooted Turbo!! I have always rooted my devices but I have never run adblock. I downloaded and flashed 1.5.2a without issue. Everything seems to be working OK except Pandora Radio. Whenever an Ad should be played it causes app to freeze and force close. Not sure if this is normal for Adblock build. Any help would be awesome!! Thanks in advance.
Click to expand...
Click to collapse
Are you on 1.5.2a with Viper audio ? Just go to 1.5.2a without ad blocking. I Will put up an V4A without adblock if you need it?
computerfreek274 said:
Are you on 1.5.2a with Viper audio ? Just go to 1.5.2a without ad blocking. I Will put up an V4A without adblock if you need it?
Click to expand...
Click to collapse
I am on 1.5.2a with adblock without viper audio. If you can put 1.5.2a without adblock with viper audio that would be awesome. Thanks again for all the hard work!
DROIDturbo said:
I am on 1.5.2a with adblock without viper audio. If you can put 1.5.2a without adblock with viper audio that would be awesome. Thanks again for all the hard work!
Click to expand...
Click to collapse
Uploading now it will be posted tonight on the OP. Thanks.
---------- Post added at 01:56 AM ---------- Previous post was at 01:50 AM ----------
BreakingStrata said:
Thanks for all your hard work. I made a donation to you to show my appreciation. Other people who are using this should consider doing the same.
Thanks
Click to expand...
Click to collapse
Thank you @BreakingStrata.
Also 1.5.2a V4A WITHOUT ad blocking will be up tonight on OP.
1.5.2a V4A WITHOUT Ad blocking. ready for download on OP.
DROIDturbo said:
@computerfreek274 Thanks for all the hard work, loving my rooted Turbo!! I have always rooted my devices but I have never run adblock. I downloaded and flashed 1.5.2a without issue. Everything seems to be working OK except Pandora Radio. Whenever an Ad should be played it causes app to freeze and force close. Not sure if this is normal for Adblock build. Any help would be awesome!! Thanks in advance.
Click to expand...
Click to collapse
1.5.2a V4A WITHOUT Ad blocking. ready for download on OP.
warning message
Hello, I ran the root as per mofo and root checker says I am rooted. I tried to flash the computerfreak 1.5.2a and recieve this error message:
'C:\Users\DAN\Downloads\mofo\mofo\windows\Computerf
AdBlock1.5.2a.img.7z' does not look like a valid ex
This is bad. Type YES to continue and risk it all:
I went back and looked at the download file name and it looks like I didn't inadvertantly change anything.
did I do something wrong?
Do I just type yes?
I didn't read about this error looking through the thread, unless I missed it.
HELP.
mspt
I thought my Moto Voice not working was an isolated issue so I was about to ask about a potential mistake on my end. I see I'm not the only one and has to do with V4A. I just wanted to share that I'm another one that doesn't have it working.
i've been trying unsuccessfully for the past few hours to get xposed and gravitybox working on my nexus 6 that i just got on friday...unlocked and rooted fine, added the tethering line to build.prop are the only tweaks i've made so far (haven't even updated past 5.0 stock LNX07M). i just can't get this working...the xposed installer says the framework is installed, but gravitybox always says that the framework is not responding. is there a trick i'm missing to get this to work? i've been searching for the past few hours but haven't found anything that has helped me...
i've tried setting the kernel to permissive and that didn't work, but i thought the new versions of the apk didn't need to do that anymore anyway? i'm out of ideas...help please!
crackers8199 said:
i've been trying unsuccessfully for the past few hours to get xposed and gravitybox working on my nexus 6 that i just got on friday...unlocked and rooted fine, added the tethering line to build.prop are the only tweaks i've made so far (haven't even updated past 5.0 stock LNX07M). i just can't get this working...the xposed installer says the framework is installed, but gravitybox always says that the framework is not responding. is there a trick i'm missing to get this to work? i've been searching for the past few hours but haven't found anything that has helped me...
i've tried setting the kernel to permissive and that didn't work, but i thought the new versions of the apk didn't need to do that anymore anyway? i'm out of ideas...help please!
Click to expand...
Click to collapse
Did you activate the module and reboot?
Have you tried other modules?
Yep, I activated it and rebooted. Haven't tried any other modules yet because that's really the only one I want/need at the moment...
Sent from my Nexus 6 using Tapatalk
crackers8199 said:
Yep, I activated it and rebooted. Haven't tried any other modules yet because that's really the only one I want/need at the moment...
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I think you need to for troubleshooting purposes.
danarama said:
I think you need to for troubleshooting purposes.
Click to expand...
Click to collapse
alright, i'll try another module and report back here
alright, advanced power menu doesn't work either. so, it seems xposed itself is not working for me...i have no idea why, though.
nevermind, it seems it's an issue with the new installer and framework. went back to the previous versions suggested by people in the official xposed thread and it looks like it's working now...
crackers8199 said:
nevermind, it seems it's an issue with the new installer and framework. went back to the previous versions suggested by people in the official xposed thread and it looks like it's working now...
Click to expand...
Click to collapse
Glad you sorted it. Yeah the v65 stuff seems to be causing some people some issues. Works for some, even with the error but not for all.
New release!?
http://forum.xda-developers.com/showthread.php?t=
Hi,
I am new here. I am also new to rooting as I just rooted to 7.1 yesterday. I wanted the pixel look on my 6p. I believe I used superSu (not sure what that is lol I need some education), but that is the app on my phone. Everything is working pretty good aside from 2 things: 1. snapchat login doesn't work and from what I have seen online I cannot uninstall xposed installer because as of now I do not even have one installed because it's not released for Nougat yet. Or is that what SuperSu is? Also my battery is draining like crazy.... someone please tell me how to fix that and possibly educate me a bit on what these particular apps are, superSu and xposed installer. I am sorry to create another thread if these things were already stated but I am so confused..
Thank you!,
Brianna
I have two Xiaomi phones, one Redmi Note 8 and one Redmi Note 10, both with unlocked bootloaders. I made a fresh factory reset on them and installed the latest version of Magisk.
My problem is that SN basicintegrity fails on both of them (and ctsProfile as well of course). But I want to take care of basicintegrity first.
What I have done already is to enable MagiskHide and also Hide Magisk app with a custom name.
For MagiskHide, I selected all modules under "Google Play services" and "Google Play Services for AR". Not sure if I should select anything else. I also tested hiding with a root checker app and it looks that hiding works.
I have no Magisk modules installed. Using stock ROM on both phones.
Is there anything else I should to to pass basicintegrity SN?
API error?
If so, just wait for some days new version will solve this problem.
Pixel 3 XL on android 11 with magisk 22. Safetynet passed up until a few days ago. Not now tho. I wonder what changed?
Guys just put some more effort into searching, there is one big Magisk support thread and lot of discussion about this issue
Update to latest Canary
https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Lord Sithek said:
Guys just put some more effort into searching, there is one big Magisk support thread and lot of discussion about this issue
Click to expand...
Click to collapse
It's difficult to find info in one big thread, not sure why that's how most discussion happens. Separate threads make more sense.
hkjo said:
It's difficult to find info in one big thread, not sure why that's how most discussion happens. Separate threads make more sense.
Click to expand...
Click to collapse
Multiplying posts doesn't make sense in my opinion. Several different threads were created for the same issue. It's not really that difficult to check few last pages of the main support thread since the issue is relatively new
Yeah, multiple threads on the same topic aren't good.
But one big thread that mixes different discussions beats the whole idea. Threads were invented for a reason. To concentrate discussion on a specific topic or sub-topic, and to have a sensible title. To save you from scanning posts in a megathread to find out if they're about your topic or not. Also, not all discussion is necessarily recent.
I had the exact same issue yesterday.
A quick search of the support thread took me to
The solution
wfred said:
I had the exact same issue yesterday.
A quick search of the support thread took me to
The solution
Click to expand...
Click to collapse
Hello,
Please, if you could—I hope you could—post the link to the solution you found. The masked link isn't working.
Thanks!
Cyb3rFr4nk said:
Hello,
Please, if you could—I hope you could—post the link to the solution you found. The masked link isn't working.
Thanks!
Click to expand...
Click to collapse
The linked solution is:
Update Magisk (to build 22103 or later).
This thread is about the Magisk apps SafetyNet checker extension needing an update due to an API error. SafetyNet wasn't actually failing...
If you need a few tips on how to get SafetyNet passing, there are some collected here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
Cyb3rFr4nk said:
Hello,
Please, if you could—I hope you could—post the link to the solution you found. The masked link isn't working.
Thanks!
Click to expand...
Click to collapse
Here you go, don't know why it was messed up
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Basically it was moving to the canary
Didgeridoohan said:
The linked solution is:
Update Magisk (to build 22103 or later).
This thread is about the Magisk apps SafetyNet checker extension needing an update due to an API error. SafetyNet wasn't actually failing...
If you need a few tips on how to get SafetyNet passing, there are some collected here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
Click to expand...
Click to collapse
Thank you!
I had visited the link to your site, through Google search, while searching for a fix. I also went to magisk general discussion thread, and started reading from April 23rd backwards, in a bid to locate/trace "the solution." While doing that, I came across "the solution," but didn't really try that as I'm on a later stable build (23000) than that canary build.
Background: I started facing this issue, yesterday, after I installed 23.0, from 20.4—which I had been on for a long time and didn't really want to upgrade from to avoid something like this, but after updating my Redmi Note 7 to MIUI 12.5 (Q) (I'm on xiaomi.eu stable), I started having restarts. So, I made the jump.
The restarts stopped after uninstalling that build, so I decided to upgrade to the latest stable. Did that, only to find that SafetyNet no longer passes. Basic integrity fails, and that was before installing EdXposed, which usually causes this. When I first noticed it, I checked my Play Store for device certification status, and it came out positive. That changed after a couple of reboots—I don't know which one in particular, as there were quite some during that time.
I've tried everything—except uninstalling and re-installing magisk—without success: different versions of Universal SafetyNet Fix, MagiskHide Props, enabling and disabling MH.
I have decided to put up with it. Since only a couple of my apps are affected (no GPay in my country), I am trying to make do without them until I get my new phone. Don't wish to do something that would require a factory reset/data wipe, as this is currently my DD, and I'd hate to get stranded.
Thanks all the same.
wfred said:
Here you go, don't know why it was messed up
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Basically it was moving to the canary
Click to expand...
Click to collapse
Cyb3rFr4nk said:
Thank you!
I had visited the link to your site, through Google search, while searching for a fix. I also went to magisk general discussion thread, and started reading from April 23rd backwards, in a bid to locate/trace "the solution." While doing that, I came across "the solution," but didn't really try that as I'm on a later stable build (23000) than that canary build.
Background: I started facing this issue, yesterday, after I installed 23.0, from 20.4—which I had been on for a long time and didn't really want to upgrade from to avoid something like this, but after updating my Redmi Note 7 to MIUI 12.5 (Q) (I'm on xiaomi.eu stable), I started having restarts. So, I made the jump.
The restarts stopped after uninstalling that build, so I decided to upgrade to the latest stable. Did that, only to find that SafetyNet no longer passes. Basic integrity fails, and that was before installing EdXposed, which usually causes this. When I first noticed it, I checked my Play Store for device certification status, and it came out positive. That changed after a couple of reboots—I don't know which one in particular, as there were quite some during that time.
I've tried everything—except uninstalling and re-installing magisk—without success: different versions of Universal SafetyNet Fix, MagiskHide Props, enabling and disabling MH.
I have decided to put up with it. Since only a couple of my apps are affected (no GPay in my country), I am trying to make do without them until I get my new phone. Don't wish to do something that would require a factory reset/data wipe, as this is currently my DD, and I'd hate to get stranded.
Thanks all the same.
Click to expand...
Click to collapse