Error applying OTA update from 23.1.A.0.690 - Xperia Z3 Compact Q&A, Help & Troubleshooting

I rooted the stock 4.4.4 my Z3C came with (without unlocking the bootloader), and then applied the OTAs as they appeared.
The device is still rooted according to Root Check and on 23.1.A.0.690
Now there is another OTA being offered (only 11.7meg). When it reboots to apply, the progress bar under the graphic only briefly moves to ~10% and the the phone boots fully. But it says "Software update: could not install new software version. please try again" after I enter my pass pattern.
Trying again doesn’t change anything.
Is there a log file or something I can check to debug ?
Edit: used FlashTool http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706 to upgrade to the next verson (D5803_23.1.A.0.726_Generic UK) *without* clearing USERDATA. After that reboot (and slightly panicky longer than expected time to flash), a new OTA update appears that was much larger (~10meg). That one downloaded and installed exactly as expected, and I'm now on a couple of versions after that with all my previous data intact.
I did not retain root. giefroot will come to the rescue I'm sure once all the updates are installed. Another 200meg of OTA update just showed up!

Related

2nd OTA lollipop update failing

I recieved the first OTA update for lollipop and it installed correctly. Now I went to download the large 700+mb 2nd OTA update and after the download completes my phone resets. It goes into installing the update, however about 1/4 of the way through the update, i get the dead droid screen flash on my screen and then my phone reboots back to 4.4.4 and tells me that the updated was unsuccessful. I have a moto x XT1060 dev ed, build KXA21.12-L1.26-4 on system version 212.166.4.
I'm stumped on what to try next. I have already returned everything back to stock and downloaded all updates and I get to the same point and get the same results. I've wiped all data, system, cache, and davlik, installed stock recovery and still get the same results. i've removed super user rights to see if that would work but it did not. I'm at a lose at what to try next. Anyone have any other ideas?
[email protected] said:
I recieved the first OTA update for lollipop and it installed correctly. Now I went to download the large 700+mb 2nd OTA update and after the download completes my phone resets. It goes into installing the update, however about 1/4 of the way through the update, i get the dead droid screen flash on my screen and then my phone reboots back to 4.4.4 and tells me that the updated was unsuccessful. I have a moto x XT1060 dev ed, build KXA21.12-L1.26-4 on system version 212.166.4.
I'm stumped on what to try next. I have already returned everything back to stock and downloaded all updates and I get to the same point and get the same results. I've wiped all data, system, cache, and davlik, installed stock recovery and still get the same results. i've removed super user rights to see if that would work but it did not. I'm at a lose at what to try next. Anyone have any other ideas?
Click to expand...
Click to collapse
I was having this same problem, but here is the process I went through to get through the full update to 5.1:
I saw this post this morning and started with it: http://forum.xda-developers.com/moto-x/general/help-lollipop-update-unlocked-bootloader-t3201426 I had previously downloaded the version of 4.4.4 referenced in it.
I don't have RDSLite installed so I moved on to this post: http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425 and used Option #5 since I already the Android SDK tools on my computer. After going through all the steps I have successfully stepped through all three updates, rebooting the phone after each whether it helps or not. My phone is currently optimizing apps after the second 5.1 update.
For reference I was on the most current version of 4.4.4, rooted with TWRP with no modifications to any system/bloatware apps. I originally tried Option #6 in the above thread which allowed me to take the first 5.1 update but the second update failed in the same way you described.
Hope this helps, and good luck!
Thanks for the post. I was reading through that post late last night and I was going through option #2. I didn't read further down to option #5, but that worked perfectly. My phone is optimizing apps as we speak.

pblem with restart's and stuck device

hi
all, i have nexus 6 device with 6.0 MRA58R and open bootloader and it was update by the device from google,still before that i try to do root and didn't succeedwith 5.1, so i go back to 5.1 and it was update as i said but the device is stuck by the start or just by regular use...something is wrong and i don't know what, there is also sound when it stuck like A screech sound and it stuck
what to do next?
thanks
If your bootloader is unlocked, as mentioned in your other thread, download a stock image from Google and flash its components (except userdata.img) using ADB. As a result of your tinkering, something got messed up on the device, and flashing the stock image should resolve that.
tried these ...didn't help,it stuckes even after good flash with adb cause with OTA it stucks at the middle
You flashed MMB29Q from the shamu section of the page here? That is the absolute latest factory image available. There should be NO OTA update available.
first of all i tried to download the OTA cause i was with root and did unroot and i want to saw thet it get's the OTA's correct ,then i installed the version as you write, but still when i start the wifi or in regular use the device can be stuck and restart.
any idea to solve it? even in safe mode it stucks
No, not really. Like you mention in your other thread, it appears to be a hardware problem.
For the record, downloading the OTA updates is a waste of time when the latest factory image is available. When you get your replacement device, assuming it's not already on 6.0.1, install the image from the link I gave you, as it already includes in the image all the updates Google has released for Android 6.0.1.

H81120v - anybody else get this just now?

Did a clean flash of 20r about an hour ago, was in the middle of setting things up when I get the popup about a new update, roughly 164MB in size so I figured what the hell why not (I've got the bootloader unlocked on my H811). Went through the download/reboot/install (took about 3 minutes) and upon getting back into the normal state of the device I took a peek at the software info (pic attached) and note the radio version has changed somewhat and the security patch is now for April 1 2017. No idea what else has been added or changed but the size of the update at about 164MB stood out a bit, will try and find out more info as I'm able.
Of course T-Mobile's support site still only has info for 20r as the last available update but that's not really a big surprise I suppose.
EDIT:
Looked at the VersionInfo data just to see if the anti-rollback had changed but my H811 always shows "Non-fusing device" and I still can't get any accurate info about what that means precisely but anyway, added two pics for the info I'm seeing.
I did
Same here. Waiting for the debloated rom version of this update.....
yup, just saw after a cache and dalvik wipe on reboot.
https://www.mylgphones.com/firmware-update
If you take the OTA update on a rooted device with TWRP (running stock 20r), does it succeed and merely un-root the device, which can then be re-rooted by flashing SuperSu?
pretty sure you'd have to go back to OEM 1st and then root again. But I'd think the root may not keep the 20v.
Better to wait, as above, for a debloated rom version.
Rooted 20v kdz now available
User kevp75 has kindly created a kdz of 20v. There is a download link in this post.
[ROM][KDZ] LG G4 H811 20R Stock Rooted ROM and KDZ - Post #87 - https://is.gd/PD6DIf
Use LGUP in *upgrade* mode to keep apps and data. You will need to use ADB to re-install TWRP and flash SuperSu. xPosed also need to be reinstalled after an upgrade.
But all in all, pretty painless.
As of 5-17 there is a rooted zip of 20v:
https://forum.xda-developers.com/showthread.php?p=72328620

What is the purpose of each of the 3 different update zip files ?

Hi,
Sorry of this is a bit of a newbie question but:
What is the purpose of each of the 3 different update zip files ?
And do I have to apply them all - and in what order ?
In my case, I am about to update to B389, and I have downloaded 3 files for VIE-L29C636B389 (currently on VIE-L29C636B130), and I have an update.zip, an update_full_VIE-L29_hw_spcseas.zip and an update_data_full_public.zip.
I was planning on doing the first two by the dload method (with reboots in between), but the update_data_full_public.zip doesn't appear to have an update.app, so how do I load that ? (I do have TWRP on my phone, so could probably figure it out - eventually).
Cheers,
SZ
same question
I read somewhere that it should be flashed in that exact order. i'm guessing that is the same procedure as with auto OTA updates, except now we have rooted phones, so bye-bye to auto updates. I am currently on VIE-L29CB636B387 and i received an automatic Huawei notification of a new version (VIE-L29CB636B388) about a week ago. I tried to update to that version in System Update-Quick Update, but that didn't work (surprise!). There was no issue though as when I rebooted it just went back to 387. However, I now have a red "New Version" notification in my System Update. Please tell me how your upgrade went if you went ahead and flashed 389. I have the three files already from filefinder, i also have TWRP and/or I could use adb fastboot to install. Thanks in advance.
Hey,
I am not sure I want to proceed on the basis of something that somebody 'read somewhere' ....
Anyhow - I've not run these updates yet, as I wanted to backup my phone first, but TWRP keeps blowing up with an error in the middle of the backup, so I am not going to try anything until I get to the bottom of that.
Will let you know if/when I ever go ahead!
Cheers,
SZ
Hi,
TWRP blowing up during NAND backups? thats not a good thing. Upon the advice of a forum member (xzanium) I flashed TWRP 3.1.1-1 instead of TWRP-3.2.1-0-vienna. No hitches so far, solid backups and no hiccups in flashing SuperSU, also got xposed to work seamlessly and other stuff. I hope you are able to resolve the issue you mentioned and get around to getting VIE-L29CB636B389 on your phone.
Well good luck to you, and post here any progress if you would.
SZ,
I have an idea on what the purpose of each of the 3 different update zip files are for and whether you have to apply them all - and in what order.
Since I could make a NAND backup using TWRP without issues, and there was an OTA update notice for an upgrade to VIE-L29CB636B388 which I couldn't upgrade to while rooted, I decided to unroot in order to upgrade to that. First i did the requisite steps - uninstalled the xposed framework and proceeded with the full unroot with SuperSU. Then I performed the dload method to flash the update.app that I extracted from the update.zip.
It was here where i hit a snag. What followed was, I found out that Huawei needs a verified stock rom, meaning it has to be a fullOTA-MF-PV in order that the bootloader could be relocked. So I tried my luck and downloaded the stock ROM VIE-L29C636B370 and flashed that. Success! From there, and several auto upgrades later I was back to L29C636B370. Reinstalling my Google account also locked back FRP. At this point i am full stock EMUI 5
Now, to answer your question. When I tried to upgrade to VIE-L29C636B388 via system update quick update. I only saw one file - update.zip therefore this must the only one needed for incremental patches. The same holds true with update_data_full_public.zip as I later learned when I decided to use the proxy upgrade method in MT filefinder . It applied a 2nd patch. The third file, namely, update_full_VIE-L29_hw_spcseas.zip was not required for this incremental update. In fact, the update process was cut short and an error message appeared that the file could not be located, even though i copied that to the HwOUC folder. It appears that this was deleted before the fullOTA update could finish during the incremental update process. Clearly, this last zip is not necessary for incremental updates. So this must be the package which delivers the rest of the ROM, or the parts of it that needs to be changed.
So, obviously what "I read somewhere" was legit. I hope that answers your question.
cheers!
mm

Updating Pixel 4 To March 2020 OTA w/Magisk

I went to check for system updates today and my pixel initially started to download the latest patch and then after a couple of seconds went straight to telling me that there is no update available. Anyone else have this issue and/or successfully update to the March 2020 OTA via the process below?
Updating Phone Once Rooted:
- Check for device updates, when found:
- Tap uninstall in 'Magisk Manager'
- Tap restore images
- install OTA (do not reboot)
- Back to magisk, tap install > select install to inactive slot
- When magisk installed, press the reboot button in it. It'll force to the other slot AND you'll be updated AND rooted​
I assume I should be able to go under 'System' -> 'Advanced' and get the OTA under 'System Update'. I've already disabled 'Automatic system updates' under 'Developer Options'. Just making sure google is somehow not blocking the update on rooted devices and that the above steps are correct. Thank you in advance!
Found similar thing on reddit here.
It's very common for unlocked and rooted Pixel phones to not "find" or complete the monthly OTA updates. There must be some sort of check in the OTA process that fails on rooted phones.
You should get familiar with the "sideloading" process of manually flashing OTA images.
Here is a set of instructions that I wrote in my Pixel 3a rooting guide. The process is exactly the same for the Pixel 4 series.
Taking an OTA update should be as easy as the above instructions. However there is another option available to install an OTA update called sideloading. Sometimes the update doesn't appear on the phone in a timely manner and you may want to manually install the update. Other times the OTA update seems to fail for some reason. In the end, you may decide to sideload the OTA instead of trying get it via the update feature on the phone. Surprisingly, it's actually faster to install the update via sideloading than it will be to take the OTA normally. I'll walk through the sideloading steps.....
Optional Step 1 - Uninstall Magisk (so that it restores the stock boot.img). If you find yourself unable to boot into recovery, you will have to restore the stock boot.img. I've run into this issue on some Android 10 images, but not all.
Step 2 - Download to your computer the correct OTA image from here
Step 3 - Connect to your phone via ADB on your computer. You should see the device listed if you type the command "adb devices".
Step 4 - Boot your phone into recovery (type the command "adb reboot recovery").
Step 5 - The phone will have a green android robot with a red sign over it's open access panel. Press the power button and then the volume up button while still holding down the power button.
Step 6 - Select "Apply update from ADB" using the volume buttons to highlight the choice and the power button to select it to enter the sideload mode.
Step 7 - Using your computer, type "adb sideload ota_file.zip" where ota_file.zip is the name of the OTA file you downloaded in step 2.
Step 8 - Once the update finishes, reboot the phone to complete the update process. (See note below about initial boot times).
Step 9 - To obtain root again, please use one of the two root methods listed above
Please note, the initial boot may take quite a while. I've seen the process take upwards of 20 minutes and longer. I think part of the reason it can take so long is that it optimizes the apps during this boot process. The more apps you have, the longer the process may take. When you take a regular OTA update, the phone will change to a screen where is specifically tells you it is optimizing the apps and counts up as the apps are optimized to give you status updates. When you use the the side-load method, it all happens with just the regular boot animation running and without any status updates. Because of this, it is easy to assume something has gone wrong with the boot process while in fact the phone is working through the process normally. If it isn't boot looping (showing the initial power screen before moving back to the boot animation), everything is fine and you just be patient and let the phone complete the process.
Click to expand...
Click to collapse
sic0048 said:
It's very common for unlocked and rooted Pixel phones to not "find" or complete the monthly OTA updates. There must be some sort of check in the OTA process that fails on rooted phones.
You should get familiar with the "sideloading" process of manually flashing OTA images.
Here is a set of instructions that I wrote in my Pixel 3a rooting guide. The process is exactly the same for the Pixel 4 series.
Click to expand...
Click to collapse
Thanks for the reply! I'm very used to sideloading/dirty flashing the updates, was hoping to use the Magisk method . Seems like google is getting smarter with their updates. I am guessing the current inability to see the OTA is due to the updates with google pay and google wanting to ensure banks it is safe.
I just finished sideloading March's OTA and patching the boot.img and everything seems to work, just a bit more effort than leveraging Magisk.
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
I experienced same exact thing. Looks like it saw the update at first then after a few seconds reverted to No updates available. About to try uninstalling Magisk, if no bueno, then gonna just sideload.
Spookymyo said:
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
Click to expand...
Click to collapse
Did you disable 'Automatic system updates' on the phone? That should still allow the download to occur just not the install. It seems like google got smarter with this update to detect rooted phones.
Gooch4130 said:
Did you disable 'Automatic system updates' on the phone? That should still allow the download to occur just not the install. It seems like google got smarter with this update to detect rooted phones.
Click to expand...
Click to collapse
Yes I disabled automatic updates. It didn't do it automatically, I clicked the check for update button. Normally when I do that it says there's a download available and then I know to check online for the flash file. This time it updated without stopping.
FAILED (remote: Failed to write to partition Not Found)
what i am doing wrong ????
---------- Post added at 12:21 PM ---------- Previous post was at 12:17 PM ----------
Boot loader is unlocked...
10.0.0 (QQ2A.200305.003, Mar 2020, All carriers except AT&T)
this version i did ota update
i am from germany.
okay, i found a way to root, but how is it with safety net fix ???
anyone an idea ???
Deleted
Spookymyo said:
I had something funny happen. I was rooted in the January update. I just decided to check for updates. It always shows there's an update but always fails to download it. This time it downloaded and installed it. All the way to the March update. This unrooted me. I still had Magisk and all my modules but it was disabled.
I've tried the usual methods to reroot it. I downloaded the March update. Extracted the boot image. Patched it in Magisk. Put it on my PC and flashed it. The phone restarted and displayed the Google start up screen and a waiting bar like it was optimizing apps. But when that was done it went to a black screen and never left it. I put the phone down and came back to it over an hour later and it was still black. I had to reflash the stock OTA update.
Anyone know why that happened?
Click to expand...
Click to collapse
It installed the OTA for me too, now I'm afraid to restart my phone.
mattcoz said:
It installed the OTA for me too, now I'm afraid to restart my phone.
Click to expand...
Click to collapse
I would flash Magisk again before you restart.
I still can't get my phone rooted. I'm not sure what's going on. I wonder if other people have been able to successfully root the March update.
I successfully rooted the March update, using the boot.img method.
Spookymyo said:
I would flash Magisk again before you restart.
I still can't get my phone rooted. I'm not sure what's going on. I wonder if other people have been able to successfully root the March update.
Click to expand...
Click to collapse
I rooted with boot.img method, as well
sruel3216 said:
I rooted with boot.img method, as well[/QUOTE
I ended up following this
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Click to expand...
Click to collapse
I got it rooted. It ended up taking a factory reset. It must have been some file interfering with the process. Once I reset my phone the rooting process went without incident.
As I'm searching for a more Phone based update wy, I'm thinking about to use maybe the Implemented OTA Process, but download the OTA-File manually... But for that We must know,how the OTA process is working. Did someone know:
- Where the update stores the download fine (I found a OTA and a OTA_Packge directory in the /Data/ folder)
- is there maybe a setting or information which must be injected somewhere (maybe a txt file)
- after that the ota update could then maybe started by hand
Has someone informations on that? If maybe someone where the ota still works and stil has root could check the files and places?
Chris.C said:
sruel3216 said:
I rooted with boot.img method, as well[/QUOTE
I ended up following this
https://www.youtube.com/watch?v=kZY8qiz2SZ0
Click to expand...
Click to collapse
Worked like charm!! Thanks!! :good:
Click to expand...
Click to collapse
I unlocked the bootloader, sideloaded the August 2020 OTA and flashed the patched boot image. Kept bootlooping, then I restored to the original, booted in, installed Magisk Manager and then flashed the patched image again. Just leaving this here in case it helps someone.

Categories

Resources