The worst kind of brick. - Galaxy S III Mini Q&A, Help & Troubleshooting

Hello.
I have managed to brick my I8190N, by installing TWRP through this app https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en
I can't access recovery, download mode, and I cant even get the phone to boot. When I hold down the power button, it displays the S3 Mini logo for a few seconds and then blacks out. After that, it wont show anything on the display even when I hold down the power button. But when I pull the battery and reinsert it, I can turn it on again for a few seconds.
The problem started with me installing Virginity V14 over CM 5.1.1 Then i couldn't get it to recovery mode anymore so I thought i'd reinstall recovery through TWRP MANAGER app from google play store. After that the phone went bricked. Also, my Home button and back button are not working, because the flex cable is broken. I used virtual buttons to emulate these. Now I've hears that you could get to download mode when holding vol dn + home+ power although i've gotten there with vol dn + power buttons before. So I would like to know shall I order new buttons from ebay, or what else are my possibilities of getting the phone working again.
ty in advance.

Fix the buttons!!
Fix the buttons dude!!

Related

[Q] Problem booting into Recovery

So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?

[Q] Any chance of recovery from bricked state?

I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
How did you flash, and when did you realize there was an issue
Captivate
Cog 2.2
I flashed using ROM manager and I realised the issue after the screen remained black for around 30 mins.
sag.misc said:
I was upgrading to Cog 9.1 using 2e recovery and I think my captivate is now bricked. It does not display anything (only black screen). Even after connecting to USB I do not see the battery charging symbol. Is there anyway out of this mode?
I have tried all the different key combos to try to get into download mode. I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
the volume buttons and power combo are used to put it in recovery. Mine got stuck on the at&t logo. I pulled the battery after about 40 minutes, turned it on into recovery, wiped my data, rebooted, then worked flawlessly. My advice -> pull battery, put it back in, hold volume buttons, then connect the usb while continuing to hold up/down volume buttons, this should get you into download mode.
sag.misc said:
I could always get into download mode earlier using down button + power button combo.
Any pointer will be very helpful.
Click to expand...
Click to collapse
This sounds like i9000 rom button combo. Won't work with COG. For recovery hold both volume buttons and hold power button in. When at&t logo shows up, wait about a second and release the power button but continue to hold the vol. buttons. Should get you there.
For download, hold volume buttons down and plug in usb. Should put ya right there.
If you have a cappy that has the no buttons bug, you're pretty much hosed.
Designgears has a thread in the development section about the 3 button issue, with a mod that fixes it. Give it a read.
If you had usb debugging enabled and the computer sees the phone, you should be able to use adb to reboot recovery or download too.

[Q] recovery boot for XT701

By lack of another location, can someone tell me how I can get into the recovery mode for the XT701?
I tried pressing the media button and powering up (with media button pressed). This gives me the exclamation mark-in-triangle display, after that I tried Volume-up plus media button, and volume-up plus camera button, but neither seemed to bring up a recovery menu.
I also tried startup with camera button and volume-up pressed, which gives a boot loader meny, which only tells me I have to connect to a USB cable. (and if I do, nothing else happens...).
So basically those methods don't work (despite what people say on the internet).
Can someone tell me what is the right methode to start up recovery mode on the XT701? It is a necessity to use because without it no one can flash, so please let me know asap.
From what I remember when I was using this phone, powering the phone on while holding the media button will get you to the /!\ symbol. Once there, then holding the volume up button and pressing the camera button SHOULD get you into the recovery menu.
If that's not working... then I got nothin. That's what I did to get into recovery. I just tested it on my old XT701.

[Q] No Download Mode

I have an i9000 international, and I recently (attempted) to flash Darky's Rom 10 RC6, after flashing it in Odin, my phone started booting. All is fine until after 'S' logo screen. I've tried to get it into download mode frantically, but nothing is working. The 3 button press, not working. I've tried other methods, like removing the battery and plugging it into your computer, then volume buttons, but nothing...
Please help
Are you holding the Vol down + Home + Power buttons together long enough ?
Yeah, I've tried holding them down until the splash screen goes away. Just regularly boots, and then stop holding down power button when the splash screen is up. No luck. I think I might have to just jig it.
It can be tricky, in mine you first have to press home, then on+down, but in order that on goes before down...all other combinations at least in my I9000 won't work, and if it fails, remove the battery put back and try again.
SamBroomby said:
Yeah, I've tried holding them down until the splash screen goes away. Just regularly boots, and then stop holding down power button when the splash screen is up. No luck. I think I might have to just jig it.
Click to expand...
Click to collapse
You shouldn't even be seeing the splash screen.
What works for me everytime, is doing it in this order:
Press & hold down the vol-down button & home button, then (while still holding down those 2 buttons), press & hold the power button. You should be in Download mode in like 1 to 2 second. When you see the Download mode, let go of all 3 buttons.

Note 5 volume button broke stuck in safemode.

Hi my volume button down is broken and everytime it boots it's in safemode.
Whenever trying to access recovery it normally boots up when buttons are pressed.
Booting into download mode freezes it, I have to do a hard reboot by pressing all the buttons.
Volume/power button work fine when in use.
I've opened up my phone to disconnect my volume button it stills boots up in safemode.
I've tried 2 new roms still in safemode.
Hello brother,
Even you flash 2 new roms still booting up safe mode, bad seen
i feel your volume down button was keep pressed maybe,,,,,maybe (it should be b coz of dust or something else).
to be confirm is that your volume button broken or pressed follow the steps below
1. switch on your mobile release the power key and Press again the power key and wait till finish the boot, (if the device get restarted it means we can confirm your volume down button was pressed & hold)
2. press home button & power button check if the device is going to download mode ( if you stuck press power button u will get exit)
how ever try to clean the volume down button inside and pull slightly. after turn on your mobile.
if your damn sure volume button was broken not working at all, then lets think about it

Categories

Resources