I have installed the team win recovery project on my s3 mini 18200n, and forgot to back up my stock rom. I then wiped, and flashed a zip, as said to do in the guide. When I try to flash a new rom, it states that it has failed, and that "Skipping md5 check : no md5 file found" and then states of how the zip signature failed. I am genuinely stuck, and if anyone could help me, I would be forever grateful
ToenailJuicebox said:
I have installed the team win recovery project on my s3 mini 18200n, and forgot to back up my stock rom. I then wiped, and flashed a zip, as said to do in the guide. When I try to flash a new rom, it states that it has failed, and that "Skipping md5 check : no md5 file found" and then states of how the zip signature failed. I am genuinely stuck, and if anyone could help me, I would be forever grateful
Click to expand...
Click to collapse
Flash the stock rom using odin...It should fix your prob...and which zip file did ya tried to flash?
I encountered a problem while flashing a Custom Rom using TWRP....It could not flash the Rom...But later I tried to flash it with Philiz Touch Recovery, it flashed just fine...You could try to flash the rom using Philiz Recov...
nekart said:
Flash the stock rom using odin...It should fix your prob...and which zip file did ya tried to flash?
I encountered a problem while flashing a Custom Rom using TWRP....It could not flash the Rom...But later I tried to flash it with Philiz Touch Recovery, it flashed just fine...You could try to flash the rom using Philiz Recov...
Click to expand...
Click to collapse
I tried to flash a few different roms, all which where variants of the stock, but deodexed or customised. I tried philz recovery at first, but for some reason i thought that didn't work, so I installed teamwin. Thank you so much for helping, I have been so worried!
ToenailJuicebox said:
I tried to flash a few different roms, all which where variants of the stock, but deodexed or customised. I tried philz recovery at first, but for some reason i thought that didn't work, so I installed teamwin. Thank you so much for helping, I have been so worried!
Click to expand...
Click to collapse
I8200 or I8190? and can u tell me which rom it was that u tried to flash the first time with philiz?
nekart said:
I8200 or I8190? and can u tell me which rom it was that u tried to flash the first time with philiz?
Click to expand...
Click to collapse
Don't worry, I have fixed it using the above said method of flashing through odin.
Congrats!! :good:
Related
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
warfareonly said:
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Click to expand...
Click to collapse
asf58967 said:
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
Click to expand...
Click to collapse
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Pantherx12 said:
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Click to expand...
Click to collapse
Did you wipe ? Make sure you're on safe kernel.
I had the same !
When you want to flash sth, just uncheck that two thing above "slide to flash"
I always get a unsuccessful message when flashing rom through twrp. After that, I wanna restore my stock 4.1 I backup earlier, but it went into boot loop after I restore, I had Odin back to stock for twice, reroot and things remain the same, any help?
Thanks in advance!
If i remember right in TWRP must mount your system before flash.
Powered by CM11
R_a_z_v_a_n said:
If i remember right in TWRP must mount your system before flash.
Powered by CM11
Click to expand...
Click to collapse
I'm a newbie, can you kindly link me to a related article about that? Thanks btw
quanlim said:
I'm a newbie, can you kindly link me to a related article about that? Thanks btw
Click to expand...
Click to collapse
What error message receive in TWRP after you try to flash?
R_a_z_v_a_n said:
What error message receive in TWRP after you try to flash?
Click to expand...
Click to collapse
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash
quanlim said:
I'm not able to boot after that, I Odin back to stock, it showed failed after trying to flash
Click to expand...
Click to collapse
From what ROM you are trying to restore?
quanlim said:
... it showed failed after trying to flash
Click to expand...
Click to collapse
And the cause which led to the installation failure?
Try to use CWM recovery from CoCore Kernel and see if you can flash custom ROM's.
But make a backup in CWM of your stock ROM, because that one from TWRP don't work in CWM.
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
I will try first, will report back =D
elementbt said:
I have never had any bugs/errors with CWM, NEVET. So try to follow Razvan's comment
Click to expand...
Click to collapse
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
I can't really help. Try to search on forum for this error, I have read something about it time ago but can't remember where, sorry.
quanlim said:
Using CWM, getting a 'bad zip' message, when I try to restore, it says 'md5 mismatch'
Click to expand...
Click to collapse
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.
R_a_z_v_a_n said:
Redownload the ROM. Zip is corrupted, or you renamed the folder zip and name contain spaces.
Try first with redownload. I'm almost sure for corrupted zip.
Click to expand...
Click to collapse
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?
quanlim said:
Ok, and how about the unable to restore what i backed up? btw, just to double confirm, do I flash CWM by downloading Cocore, extract it, and flash the tar.md5 with universal kernel flasher?
Click to expand...
Click to collapse
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.
R_a_z_v_a_n said:
Make sure what version you flash. If your phone is I9070P you must download EP version, and for I9070 must flash E version.
Click to expand...
Click to collapse
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too
quanlim said:
Re-rooted, install recovery, just not able to flash roms, still get the 'bad' message, redownloaded the rom, and tried other roms too
Click to expand...
Click to collapse
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.
R_a_z_v_a_n said:
Bro, what kind of phone do you have?
What recovery are you trying to install?
What ROM ?
Tell more details if you want help.
Click to expand...
Click to collapse
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups
quanlim said:
GT-i9070, rooted with the root.zip (from recovery), flash shaan temporary cwm, from there flashed cocore kernel (CWM), and I'm stuck here, unable to flash roms, unable to restore stock rom backups
Click to expand...
Click to collapse
Put screenshot of your system
R_a_z_v_a_n said:
Put screenshot of your system
Click to expand...
Click to collapse
here you go
quanlim said:
here you go
Click to expand...
Click to collapse
Hmm, now you have custom recovery.
Enter in recovery, and if choose backup to sdcard1., and wit until finish that operation and receive message "backup complete".
Then, if you already have downloaded ROM and GApps, make wipe cache and dalvik and do a wipe of data/factory reset (be sure you have already backed up your apps with some backup app like Titanium Backup or other), go to install zip, choose zip from external card and proceed to flash, first ROM after that GApps.
Hey guys!
my s3 mini i8190 is stuck on "Samsung Galaxy SIII Mini I8190" in infinite restart!
it's not reaching the samsung logo at all
it happened after i flashed cm11 novafusion 4.4.2 but i got no network (using maclaw twrp)
so i tried carbon but it was the same problem (no network)
so i flashed stock rom 4.1.2 (using odin) that's when this problem occured
plz if anyone has a clue on what this problem might be
Can u go into recovery mode?
o0VIP0o said:
Can u go into recovery mode?
Click to expand...
Click to collapse
thanks for responding!
yes i can go into recovery and download mode too
i tried to wipe cache and factory reset
but still the same
flash custom recovery and reflash rom from recovery
Gw|n said:
flash custom recovery and reflash rom from recovery
Click to expand...
Click to collapse
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
warezhafid14 said:
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
Click to expand...
Click to collapse
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
xXPR0T0TYPEXx said:
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
Click to expand...
Click to collapse
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
warezhafid14 said:
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
Click to expand...
Click to collapse
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
moonryder said:
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
Click to expand...
Click to collapse
thanks man
i will try that
eventhough i did it before
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
then flash stock rom and try it again.
otherwise i have no idea...
moonryder said:
then flash stock rom and try it again.
otherwise i have no idea...
Click to expand...
Click to collapse
thanks man for your time
i tried flashing stock rom many times even rooted ones
anyway thanks man
i appreciate your help
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
xXPR0T0TYPEXx said:
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
Click to expand...
Click to collapse
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
warezhafid14 said:
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
Click to expand...
Click to collapse
Does it only happen if you flash TWRP?
xXPR0T0TYPEXx said:
Does it only happen if you flash TWRP?
Click to expand...
Click to collapse
CWM too
You said :
warezhafid14 said:
i tried flashable ones it gives me signature error
Click to expand...
Click to collapse
can you make a screenshot of this error?
xXPR0T0TYPEXx said:
You said : can you make a screenshot of this error?
Click to expand...
Click to collapse
when i turn on my phone it shows "Samsung Galaxy SIII Mini GT-I8190"
than it is supposed to show the samsung logo
but no it restarts and again "Samsung Galaxy SIII Mini GT-I8190"
infinite loop
and for flashing from recovery it said
E:signature verification failed
warezhafid14 said:
and for flashing from recovery it said
E:signature verification failed
Click to expand...
Click to collapse
Recovery must be custom.
Gw|n said:
Recovery must be custom.
Click to expand...
Click to collapse
that's what im trying to do
im trying to flash custom recovery
I tried to flash CWM recovery with Odin in a Galaxy Mini 2 and it works, but when I try to reboot the phone go to recovery again. I tryed to flash Cyanogenmod 11 but It failed. Then I tryed to put binary in the phone and it failed too. So It is im bootloop and when I try to flash something Odin says me error with md5 binary.
SO WHAT CAN I DO?
(Sorry for english)
Nero03 said:
I tried to flash CWM recovery with Odin in a Galaxy Mini 2 and it works, but when I try to reboot the phone go to recovery again. I tryed to flash Cyanogenmod 11 but It failed. Then I tryed to put binary in the phone and it failed too. So It is im bootloop and when I try to flash something Odin says me error with md5 binary.
SO WHAT CAN I DO?
(Sorry for english)
Click to expand...
Click to collapse
hey have you unlocked Bootloader? if not than do it otherwise it wont work. if you have it unlocked visit this link that i found on youtube .. https://www.youtube.com/watch?v=6so68uoqI_Y. i owned mini 2 long time ago had done lots of custom roms etc.. try it out and let me know i will try to help you as much as i can
make you have all the drivers installed properly before doing anything in odin.
peace
royalasif said:
hey have you unlocked Bootloader? if not than do it otherwise it wont work. if you have it unlocked visit this link that i found on youtube .. https://www.youtube.com/watch?v=6so68uoqI_Y. i owned mini 2 long time ago had done lots of custom roms etc.. try it out and let me know i will try to help you as much as i can
make you have all the drivers installed properly before doing anything in odin.
peace
Click to expand...
Click to collapse
I've solved the problem. I just flashed stock ROM using Odin and It boots. Many many thanks for help.
The problem is that when I flash CWM when I try to reboot after flash It takes bootloop and I have to flash the stock ROM again
Nero03 said:
The problem is that when I flash CWM when I try to reboot after flash It takes bootloop and I have to flash the stock ROM again
Click to expand...
Click to collapse
There is a way dude dont worry.. Lets sort this problem out give me ur device model number so i can start my research coz there are one or more models of just one device
royalasif said:
There is a way dude dont worry.. Lets sort this problem out give me ur device model number so i can start my research coz there are one or more models of just one device
Click to expand...
Click to collapse
The model is GT-S6500
I have flashed the 3.2.1.0 version of twrp recovery but it stucks at reboot when i reboot the system well i don't know what to do if i flash the old versin 3.1.1.0 is it would be problem. Now i am on stock rom and recovery. Open for suggestions.
It may be a kernel problem. I had the same thing happen on stock. I fixed it by downloading a ROM then installing TWRP. After install go right into recovery after you disconnect from Odin and clean flash the new ROM. No problems after that.
Any errors on screen as it boots?
phuhcue said:
Any errors on screen as it boots?
Click to expand...
Click to collapse
İt's just shows note 5 logo and repeating that after and after.
sparkeymat said:
It may be a kernel problem. I had the same thing happen on stock. I fixed it by downloading a ROM then installing TWRP. After install go right into recovery after you disconnect from Odin and clean flash the new ROM. No problems after that.
Click to expand...
Click to collapse
Can you provide any more details and specifics on which files and procedures worked for you? Thank you.
[email protected] said:
Can you provide any more details and specifics on which files and procedures worked for you? Thank you.
Click to expand...
Click to collapse
I used the latest TWRP and immediately flashed the Teleteam s8n8 ROM after installing TWRP. You can find the ROM on here with a quick search.