Related
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Xperia v brick
gregbradley said:
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Click to expand...
Click to collapse
no the phone doesnt connect in fastboot mode it shows no led nothing i only see in device manager that there is a
QHSUSB_DLOAD device wich i think is the processor...so what can i do man?and in device manager i see connected qualcomm hs-usb qdloader 9008 (com8)
did you try what I said?
hello greg, hows the z1, hope you enjoy it
thanks for your many many support to all questions here, hope it wasnt that frustrated when people not tried out what you suggested :silly:
to sash89: you unlocked bootloader, and flashed an cm img kernel? that let me comes to another question. you flashed that kernel above a stock rom, or you flashed CM ROM also?
Hi
The Z1 is great, I recommend it.
Yes, it does help if people try things you suggest.
brick
gregbradley said:
did you try what I said?
Click to expand...
Click to collapse
but where i must enter that code?in cmd?or where?
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
brick
gregbradley said:
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
nothing hapened man...it may be a hard brick???if yes what can i do?
sash89 said:
nothing hapened man...it may be a hard brick???if yes what can i do?
Click to expand...
Click to collapse
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
brick
gregbradley said:
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
Click to expand...
Click to collapse
nothing happens man...no leds showing up no connection to pc...only this is showing up on device manager when i connect phone to pc qualcomm hs-usb qdloader 9008 com8
This is not looking good for you.
Try this link
or this google search
but I have not heard of good things with phones that want that driver. Best of luck and hopefully someone can come up with a solution
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
YudiA1 said:
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
brick
gregbradley said:
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
Click to expand...
Click to collapse
so may i send it to warranty?what are your suggestions guys?
sash89 said:
so may i send it to warranty?what are your suggestions guys?
Click to expand...
Click to collapse
Your warrenty is void because you unlocked the bootloader.
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
brick
immerblind said:
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
Click to expand...
Click to collapse
and what is this meaning man?my battery was something like 18 percent when i flashed...so may the battery be broken?anyway when i put the phone into charge without battery red led flashes for one time...what this means?
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?
immerblind said:
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?[/QUOTEi was on stock rom man
Click to expand...
Click to collapse
Well I explain you my problem.
Since I installed last saturday the last 4.3 ROM thanks to Doomlord, I noticed my phone doesn´t charge while in power off, it just doesn´t respond to the cable charger, I tried with several cables, wall chargers, via PC,... with no result, also looking for a solution I also noticed it doesn´t also respond to comands with volume buttons so it can not boot to flashmode and fastboot using the normal way.
booting to flashmode or Flashmode is not an issue as I found a way of doing it actually a couple of them, I will explain them just in case somebody is in a similar problem than me...
Via software Using flashtool (flash/fastboot) the aplication can force the phone to boot in fastboot via adb, using PCcompanion, (flash/repair) when it checks the phone after downlodaing the firmware it forces the phone to reboot in flashmode (in my case it doesn´t it just powers off and gets stucked but just pressing the power button it does, once booted in flashmode you can open flashtool and flash the desired ROM)
Via Hardware As I said it doesn´t respond when I plug in the cable but with the cable connected to the computer and pressing volume UP/down and power until it vibrates it will boot to flashmode or fastboot.
Now lets go back to my main problem...
I have being doing several things in order to solve it with no luck...
1º flash .278 kernel with recovery thanks to sj8023ld
2º Downgrade to .145 Xperiment custom ROM
3º Downgrade to .141 oficial using flashtool (result bootloader allowed: no" when it was unlocked before)
4º Flash again .141 with flashtool (bootloader again unlocked)
5º relock bootloader and flash with PCcompanion (flash/repair)
6ºFlash .145 oficial using Flashtool
7º Unlock bootloader, Root (easyrooting toolkit Doomlord) and CWM V9 by davidmarco.
Now I am again in 4.3 leaked with root and .278 kernel
After doing all this I couldn´t find a solution, Do you know guys if I can do anything else?
Thanks a lot for your help in advance
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
iSpammer said:
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
Click to expand...
Click to collapse
How did you solve your problem?
Thanks
onomico said:
How did you solve your problem?
Thanks
Click to expand...
Click to collapse
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
iSpammer said:
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
Click to expand...
Click to collapse
No, sorry, when powered on it is recognized as normal and on power off it is not detected at all
I have problems in my stock fw with charging while powered off. Does not at all, quite the inconvenience. However if you hold the power button my charge light comes on until my phone has enough juice to power up (well it doesn't have enough juice ever, but I quickly put into airplane mode till it charges a but more...)
Sent from my LT30a
i acidentally turned off my Z1 after doing a freash room reset in a recovery menu, now my phone wont boot, is there a way i can install a rom?
josh2527 said:
i acidentally turned off my Z1 after doing a freash room reset in a recovery menu, now my phone wont, is there a way i can install a rom?
Click to expand...
Click to collapse
Can you get into flash mode?
Sent from my Xperia Z1 using Tapatalk
josh2527 said:
i acidentally turned off my Z1 after doing a freash room reset in a recovery menu, now my phone wont, is there a way i can install a rom?
Click to expand...
Click to collapse
repair using pccompanion or flash a stock ftf.
301stSpartan said:
Can you get into flash mode?
Sent from my Xperia Z1 using Tapatalk
Click to expand...
Click to collapse
if flash mode is when you hold volume down and power then no :/
run pccompanion and follow the instructions to update software
Then choose repair option
gregbradley said:
run pccompanion and follow the instructions to update software
Then choose repair option
Click to expand...
Click to collapse
The phone wont connect to my pc it gets stuck on the sony loo when it boots
josh2527 said:
The phone wont connect to my pc it gets stuck on the sony loo when it boots
Click to expand...
Click to collapse
Leave your phone off
Run pccompanion
click on software update
click on repair
attach phone in flashmode when it prompts you to
gregbradley said:
Leave your phone off
Run pccompanion
click on software update
click on repair
attach phone in flashmode when it prompts you to
Click to expand...
Click to collapse
i think i have a different version of pc companion cause it wont let me do anything until i connect the phone
Install it from here
http://www.sonymobile.com/gb/support/faq/xperia-neo-v/update-software/install-pc-companion-ps107/
It will work without the phone being connected
gregbradley said:
Install it from here
same version as the one i had, still wants me to connect my phone when i go to support zone, then update
Click to expand...
Click to collapse
http://prntscr.com/3567m8
http://prntscr.com/3567qk
http://prntscr.com/3567uf
Thanks for that, I'm doing it now, might take a while internets been a bit slow
thanks a million gregbradley!!!!!!!!!!!!! you just saved me my back side being kicked by my dad for wrecking my new phone, and the when it repaired it, it put it on 4.4 which is the whole reason i tried to root it so thanks a million!!!!
no worries.
For my knowledge, this operation via PC COMPANION, can repair what kind of brick? Bad flashing or something like that which stop flashmode run?
My sony xperia z will not power on anymore. If i connect it to a charger, it shows the sony logo and keeps restarting. When i connect it to my computer not much happens. SUS can detect it and i tried updating it, it downloads and installs and tells me to restart my phone but still nothing happens and the same thing as before happens when i connect it with a charger.Sony PC Companion app does not detect the phone.
So i tried flashing with xperia flasher and i downloaded a 4.3 stock rom, flashed it but then at the end it says usb debugging mode must be enabled but i do not think its enabled, nor can i check since my phone does not power on.
Please Help!!!
HPTL7 said:
My sony xperia z will not power on anymore. If i connect it to a charger, it shows the sony logo and keeps restarting. When i connect it to my computer not much happens. SUS can detect it and i tried updating it, it downloads and installs and tells me to restart my phone but still nothing happens and the same thing as before happens when i connect it with a charger.
So i tried flashing with xperia flasher and i downloaded a 4.3 stock rom, flashed it but then at the end it says usb debugging mode must be enabled but i do not think its enabled, nor can i check since my phone does not power on.
Please Help!!!
Click to expand...
Click to collapse
Hi, was it a stock rom on it before this issue occured?
gaza1994 said:
Hi, was it a stock rom on it before this issue occured?
Click to expand...
Click to collapse
Yes. Stock rom and also never been rooted.
bump
HPTL7 said:
Yes. Stock rom and also never been rooted.
Click to expand...
Click to collapse
Did you try to hard reset it? Try to press power and vol up.
What to you mean with xperia flasher? Download a .ftf file and use flashtool
St.Jimmy90 said:
Did you try to hard reset it? Try to press power and vol up.
What to you mean with xperia flasher? Download a .ftf file and use flashtool
Click to expand...
Click to collapse
sorry meant FlashTool. i did flash and it completed it successfully but when i tried powering on, nothing happend. so i connected to charger and the sony logo loop restart happen again. it said at the end of flashing that usb debugging must be enabled so i think that may be the problem why it did not work.
I have tried hard reset. It vibrates once, pauses and then vibrates 3 times and then nothing.
HPTL7 said:
sorry meant FlashTool. i did flash and it completed it successfully but when i tried powering on, nothing happend. so i connected to charger and the sony logo loop restart happen again. it said at the end of flashing that usb debugging must be enabled so i think that may be the problem why it did not work.
I have tried hard reset. It vibrates once, pauses and then vibrates 3 times and then nothing.
Click to expand...
Click to collapse
What if you open pcc, select repair phone and follow the steps on screen? (your phone has to be powered off)
St.Jimmy90 said:
What if you open pcc, select repair phone and follow the steps on screen? (your phone has to be powered off)
Click to expand...
Click to collapse
Thanks for the reply but as stated earlier in my first post, i said that pc companion does not detect my phone.
HPTL7 said:
Thanks for the reply but as stated earlier in my first post, i said that pc companion does not detect my phone.
Click to expand...
Click to collapse
I know, but I wasn't sure if you tried it with the repair method. If you just plug your phone in to the pc, it won't recognize it. But when you use the repair method, pcc tells you to power off the phone, and bring it into flashmode
St.Jimmy90 said:
I know, but I wasn't sure if you tried it with the repair method. If you just plug your phone in to the pc, it won't recognize it. But when you use the repair method, pcc tells you to power off the phone, and bring it into flashmode
Click to expand...
Click to collapse
when i do it pcc tells me to connect a phone.
HPTL7 said:
when i do it pcc tells me to connect a phone.
Click to expand...
Click to collapse
When I open up pcc and select "Support Zone" - "phone / tablet software update" - "repair phone" it'll ask what phone you have, then you select it, it will download the firmware and ask you to power off the phone and plug it in while holding vol up
St.Jimmy90 said:
When I open up pcc and select "Support Zone" - "phone / tablet software update" - "repair phone" it'll ask what phone you have, then you select it, it will download the firmware and ask you to power off the phone and plug it in while holding vol up
Click to expand...
Click to collapse
Sorry my bad. You were right.
However i don't think i had a repair option. It is currently downloading a firmware i think.
I'll keep you updated.
Thanks a lot.
HPTL7 said:
Sorry my bad. You were right.
However i don't think i had a repair option. It is currently downloading a firmware i think.
I'll keep you updated.
Thanks a lot.
Click to expand...
Click to collapse
No worries, if this doesn't work try again with flashtool, and select everything at wipe
St.Jimmy90 said:
No worries, if this doesn't work try again with flashtool, and select everything at wipe
Click to expand...
Click to collapse
It did not work.
How do i try that repair thing you mentioned?
HPTL7 said:
It did not work.
How do i try that repair thing you mentioned?
Click to expand...
Click to collapse
nvm, found out how to do it. Completed it but it still does not work.
Is it cause i need at least 50% battery? If so, is there any way of doing so? because if i connect to wall charger it does the sony logo restart loop and when i connect to pc it goes in mtp mode.
HPTL7 said:
nvm, found out how to do it. Completed it but it still does not work.
Is it cause i need at least 50% battery? If so, is there any way of doing so? because if i connect to wall charger it does the sony logo restart loop and when i connect to pc it goes in mtp mode.
Click to expand...
Click to collapse
I don't think it's because of your battery level..... I'm sorry, but I can't help you on that....
I think you have to send it to sony for repair. As long as you haven't modified anything on your phone they should repair it
Edit: Before you send it to sony, try their chat, sometimes they can help
Your bootloader is unlocked? And have you tried flashing ftf using flashtool?
Sent from my C6603 using Tapatalk
pjgowtham said:
Your bootloader is unlocked? And have you tried flashing ftf using flashtool?
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I am not sure whether my bootloader is unlocked or not. is there anyway i can check?
HPTL7 said:
I am not sure whether my bootloader is unlocked or not. is there anyway i can check?
Click to expand...
Click to collapse
If you dont know bootloader unlock, its most probably its locked. Grab an ftf and flash with flashtool. Usually update service works.
Sent from my C6603 using Tapatalk
I have done that before so that means it should be unlocked.
Now what do i do?
hi
i have a Z3+ E6533 deadboot
i flashed wrong ftf file
i flashed Z5 ftf and its brack
no response to charger and no response led fastboot .
my sony work good , i just want to update with flashtool and i flash wrong file
please help me
Flash again with right ftf file.
waseemakhtar said:
Flash again with right ftf file.
Click to expand...
Click to collapse
not detect fastboot and flashmod for flashtool
no green light led
saber_fakhamati said:
not detect fastboot and flashmod for flashtool
no green light led
Click to expand...
Click to collapse
Unplug the phone from your pc then press and hold the power button and volume up button.. Till you feel it vibrate then release and hold volume down button and plug the USB wire connected to the PC. Flashtool should then recognise your phone.
angvil said:
Unplug the phone from your pc then press and hold the power button and volume up button.. Till you feel it vibrate then release and hold volume down button and plug the USB wire connected to the PC. Flashtool should then recognise your phone.
Click to expand...
Click to collapse
:| :| :|
i tell you its hard break
you tell me hold the power button and volume up button!?!?!?!!
saber_fakhamati said:
:| :| :|
i tell you its hard break
you tell me hold the power button and volume up button!?!?!?!!
Click to expand...
Click to collapse
Dude chill I was just trying to help.
angvil said:
Dude chill I was just trying to help.
Click to expand...
Click to collapse
ok tnx
sorrrryyyy , this phone not even one week work for me and i depresd
and sory for bad bad bad english
saber_fakhamati said:
ok tnx
sorrrryyyy , this phone not even one week work for me.
and sory for bad bad bad english
Click to expand...
Click to collapse
Did you try to fix phone option in Sony pc companion?
angvil said:
Did you try to fix phone option in Sony pc companion?
Click to expand...
Click to collapse
not detect usb
saber_fakhamati said:
not detect usb
Click to expand...
Click to collapse
Did you even try the power button and volume up (together at the same time) thing?
angvil said:
Did you even try the power button and volume up (together at the same time) thing?
Click to expand...
Click to collapse
yes not work
saber_fakhamati said:
yes not work
Click to expand...
Click to collapse
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Daeernis said:
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Click to expand...
Click to collapse
Same here. Need help.
have you tried press vol down and plug it to PC via USB cable? if the led is green you can flash ftf
Daeernis said:
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Click to expand...
Click to collapse
Try to repair with emma, it helped me when I bricked my z5
Of course, install all drivers, flashmode, fastboot, adb and try again
Your device is softbricked as the pc can recognize it as qhsus_bulk so you have to try and eventually you will succeed
kristijan15 said:
Try to repair with emma, it helped me when I bricked my z5
Of course, install all drivers, flashmode, fastboot, adb and try again
Your device is softbricked as the pc can recognize it as qhsus_bulk so you have to try and eventually you will succeed
Click to expand...
Click to collapse
Can you elaborate???? What is emma?
njaya95 said:
Can you elaborate???? What is emma?
Click to expand...
Click to collapse
Read more here,
I think that unlocked bootloader is required for this to work but I am not sure
http://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
kristijan15 said:
Read more here,
I think that unlocked bootloader is required for this to work but I am not sure
http://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
Click to expand...
Click to collapse
Yeah I googled it earlier and found it is nothing but a flashtool. But thanks for the help.