[MM][E6603][SOUND] Xperia Z5 Headphones/Speakers Volume Boost - Xperia Z5 Android Development

Hi guys here's my mixerpath file. This is boost your speaker and headphone volume. Please backup your stock "mixer_paths.xml" file.
It reques root
Im tested on my phone, E6603 and Marshmallow(6.0) rom.
I thing it's actually works on E6653 devices BUT im not tested yet. THIS IMPORTANT
HOW TO ;
1 - Backup your stock file; (you need the root explorer, ""es file"" or ""root explorer"")
Go to "/system/etc" folder and copy "mixer_paths.xml" to sd card. (This is your stock file please keep it)
2 - Boost your volumes;
Download this file and put in your device. Than copy and go to "/syatem/etc" folder and paste it.
Than change permissions to "-rw-r--r--"
Rebot phone and enjoy !!
(Sorry my bad English)

ramone01 said:
Hi guys here's my mixerpath file. This is boost your speaker and headphone volume. Please backup your stock "mixer_paths.xml" file.
It reques root
Im tested on my phone, E6603 and Marshmallow(6.0) rom.
I thing it's actually works on E6653 devices BUT im not tested yet. THIS IMPORTANT
HOW TO ;
1 - Backup your stock file; (you need the root explorer, ""es file"" or ""root explorer"")
Go to "/system/etc" folder and copy "mixer_paths.xml" to sd card. (This is your stock file please keep it)
2 - Boost your volumes;
Download this file and put in your device. Than copy and go to "/syatem/etc" folder and paste it.
Than change permissions to "-rw-r--r--"
Rebot phone and enjoy !!
(Sorry my bad English)
Click to expand...
Click to collapse
Hey bro, the music stops after 1 minute playing with all the volume on headphones, do you think you can fix that? Lowing one level or two please

Can I try this on latest firmware (.224) ?

korom42 said:
Can I try this on latest firmware (.224) ?
Click to expand...
Click to collapse
yes backup your old mixerpaths first

worked on E6683 but i dont know if it louder or not. it seem you removed warning message when adjust louder volume hearing with headphone ?

could someone please post the original file for .224 ?
Edit : I found it somewhere
Edit : Can you please make version with a slight volume boost because with this the sound is very very loud . even with 1 volume step still loud . It would be nice if you can make one . @ramone01
cheers,

IMy secondary mic has very low volume. People can't hear me in calls. I forgot to backup.
So, could someone give me the original file mixer_paths.xml and mixer_paths_i2s.xml for Xperia Z5 Dual E6683 please?

Related

How to get Sound working on HTC Pure from ATT

Hello guys/girls.....I finally got sound working on my HTC Pure.....here is what I did....
1. Download and install: XDANDROID.2.2.AOSP.29.7.10.RC2.1
2. Download and extract: XDANDROID.19.8.10.system.ext2. Replace this System.ext2 file with one in Step 1 folder.
3. download and extract: linux-msm.201008261332. Replace ZImage and Modules...files with one in Step 1 folder.
4. download and extract: initrd-latest. Rename this file to initrd and replace it with the one in Step 1 folder.
5. Put all the files in the root of your SD card as explained on this thread: [SOUND!][19/08/10] XDAndroid - Topaz [2.1/2.2 RC2.1]
6. Start your HTC Pure and ENJOY......
I would like to thank all who has helped to make this possible.....
Thank you
Has anyone tried this?
has this helped anyone?
please post if this instructions are helpful or not
I'll try it now.
Will this play my music back or only speakerphone?
It will play music. It plays on mine
I also have topa 210 (Pure). I have found a way to ge a ringtone, but you would have to do the procedure after reboot. Also i have not found a way to get notifications or alarms yet. Hope I don't have to
1. boot into Andoroid
2. Open media scanner (You should be able to play music from your sdcard now!)
3. Using Astro file manager, navigate to sdcard/media/audio/ringtones
4. Select a ringtone you want to use (you can play it first).
5. Hold the File down until menu comes up
6. Select music options
7. Select set as ringtone
8. Enjoy!
If you look to see if your ringtones are selectable, they wil NOT be there. It will still say Silent, but the ringtone will still work. Try it out.
This is for Astro, but it may work with other programs
Tried the OP's and the post above me
Neither of them got ringtones or notifications working for me
Corwen said:
Tried the OP's and the post above me
Neither of them got ringtones or notifications working for me
Click to expand...
Click to collapse
Did you use Astro with my suggestion, or another file manager? What happened? Did you try to call the phone? It will say "set ringtone" after you select the ringtone, but after that there is no notifactation that it is set. If you tried calling the phone it should ring.
Once I'm in Astro and I'm in the music options menu, both of the options are greyed out.
I click 'set as ringtone' but it's greyed out and doesn't seem to work
Thanks! It worked on my Topaz! Yay
For step 4, it should be:
Download initrd-latest. Rename this file to initrd and replace it with the one in Step 1 folder. (you don't have to extract it)
Thank you all for making the sound works on xdandroid!
hello,
just to help you guys out further...
make sure that you have the froyo version of android from forum.xda-developers.com/showthread.php?t=509493
then, get the latest builds from
this is required!-->zImage Autobuild ( glemsom / balsat ):
• glemsom.users.anapnea.net/android2/ -> glemsonAutobuilds
or
• balsat.hopto.org/ -> balsatAutobuilds
this is optional ---> Rootfs Autobuild ( Stinebd ):
• xdandroid.southcape.org/rootfs/ -> RootfsAutobuilds
this is optional ---> Initramfs Autobuild ( Stinebd ):
• xdandroid.southcape.org/initramfs/ -> InitramfsAutobuilds
lkc0987 said:
hello,
just to help you guys out further...
make sure that you have the froyo version of android from forum.xda-developers.com/showthread.php?t=509493
then, get the latest builds from
this is required!-->zImage Autobuild ( glemsom / balsat ):
• glemsom.users.anapnea.net/android2/ -> glemsonAutobuilds
or
• balsat.hopto.org/ -> balsatAutobuilds
this is optional ---> Rootfs Autobuild ( Stinebd ):
• xdandroid.southcape.org/rootfs/ -> RootfsAutobuilds
this is optional ---> Initramfs Autobuild ( Stinebd ):
• xdandroid.southcape.org/initramfs/ -> InitramfsAutobuilds
Click to expand...
Click to collapse
Are the builds different?
I can verify that I got a very favorable result with sound. I did find a difference with the Balsat and Glemson builds of the zimage and linux-msm.20100830xxxx.tar.gz builds. The glemson file seems smalle size and worked fine. The Balsat file would not boot. I was using a Linux ext2 partiton but have have had better luck with the windown only.
Thanks itout it works. The incomecall can rings now.
king200 said:
Are the builds different?
I can verify that I got a very favorable result with sound. I did find a difference with the Balsat and Glemson builds of the zimage and linux-msm.20100830xxxx.tar.gz builds. The glemson file seems smalle size and worked fine. The Balsat file would not boot. I was using a Linux ext2 partiton but have have had better luck with the windown only.
Click to expand...
Click to collapse
i would like to believe that both of them are different builds, but serve the same purpose. i am just guessing. i could be completely wrong
It worked
Finally a tip that I both managed to understand AND solve my increasingly irritating no-sound-problem.
Thanks a lot
im still lost ? any one got a package of this ?
xhozt said:
im still lost ? any one got a package of this ?
Click to expand...
Click to collapse
what do u need help with?
i tried this, but for incoming calls i dont get any sound
phanishashank said:
i tried this, but for incoming calls i dont get any sound
Click to expand...
Click to collapse
try using the call volume buttons to enable sound in a call, its a small glitch with the new kernals
itout said:
Hello guys/girls.....I finally got sound working on my HTC Pure.....here is what I did....
1. Download and install: XDANDROID.2.2.AOSP.29.7.10.RC2.1
2. Download and extract: XDANDROID.19.8.10.system.ext2. Replace this System.ext2 file with one in Step 1 folder.
3. download and extract: linux-msm.201008261332. Replace ZImage and Modules...files with one in Step 1 folder.
4. download and extract: initrd-latest. Rename this file to initrd and replace it with the one in Step 1 folder.
5. Put all the files in the root of your SD card as explained on this thread: [SOUND!][19/08/10] XDAndroid - Topaz [2.1/2.2 RC2.1]
6. Start your HTC Pure and ENJOY......
I would like to thank all who has helped to make this possible.....
Thank you
Click to expand...
Click to collapse
can u put those files up cant find them
goat4568 said:
can u put those files up cant find them
Click to expand...
Click to collapse
or fix the folder and put it in a zip file for download please

Broken Out Revo - Boot Sound

I found how get boot sounds on my Revo with BrokenOut. Here are the steps I used.
1) Find whatever music file you like (should fairly be short)
2) Convert it to an ogg file with your favorite music editor.
3) Rename the file you just created to VZW_PowerOn.ogg
4) Mount System as R/W if is R/O
5) Put the VZW_PowerOn.ogg file into /system/sounds/power
6) Reboot
Please let me know how works!
Thanks
Here is a screenshot while in Root Explorer.
It didn't work for me. I skipped Step 4 - I was able to create the /power directory and rename the .ogg file and put it in there, so I didn't think I needed to do Step 4. Is that where it went wrong? Let me know, as I think it'd be great to have a boot sound!
I added a screenshot to the original post above while inside Root Explorer.
This is for Broken Out. If you are using a different rom I can't help.
Another problem could be that the sound is too long. I would keep it under 15 sec.
Make sure the sound plays correctly on your phone before restarting.
Have a look at the screenshot. Make sure the sound is in the correct location.
Hope this helps!
works for me.
Sent from my VS910 4G using xda premium
Super Manager
Mark Once Again said:
I added a screenshot to the original post above while inside Root Explorer.
This is for Broken Out. If you are using a different rom I can't help.
Another problem could be that the sound is too long. I would keep it under 15 sec.
Make sure the sound plays correctly on your phone before restarting.
Have a look at the screenshot. Make sure the sound is in the correct location.
Hope this helps!
Click to expand...
Click to collapse
I am on BO and using Super Manager I do not have the extension of for power that you show in the screenshot.
I can get system/sounds/effect. It shows LowBatteryM3.ogg but does not show a power option. Any thoughts?
Just make the necessary folder and put the sound inside.
Need help updating
I would love to be able to update my revolution from gingervolt 2.0 to Broken Out Revo but unfortunately every link to the vz7 rom takes me to a dead end. This is becoming very frustrating, could someone please provide a link to download vz7 that actually works?

System sounds for people with low vision and blindness make your one ogg files

Hi guys
sometimes you hear a sound coming from smartfone and you do not know what it is
I think there have been found for A solution for
for people with low vision and blindness
I've already made ​​three with one voice files.ogg
Click on it to listen one that says (your battery charging now) and (your battery is low) and (Your battery is full) instead of a sound
here I have a flash zip with these two. ogg files
https://dl.dropboxusercontent.com/u/24472656/Themas/Media.zip
Installation
download the file and put it on your sd card go to recovery navigate to the file and flash the zip
(You must have a root device)
You can also make your own .ogg file type here what you want to make and download the file right mouse click on the audio player when you're done go to here to the file to convert online from wav-to-ogg
when you're done you change the name in which you want to replace
The files can be found in system / media / audio / ui

[HELP] Change Xperia Z Boot Audio

sooo, i have been trying to change the boot audio of my Xperia Z for a while now and haven't succeeded yet (i'm noob sreh)
I have tried
putting "boot_audio.mp3" in system/media
putting "bootaudio.mp3" in system/media
putting "PowerOn.wav" in system/etc
changed permissions and none of the 3 ways above worked..
how do i do it properly? thanks
Manersky.IA said:
sooo, i have been trying to change the boot audio of my Xperia Z for a while now and haven't succeeded yet (i'm noob sreh)
I have tried
putting "boot_audio.mp3" in system/media
putting "bootaudio.mp3" in system/media
putting "PowerOn.wav" in system/etc
changed permissions and none of the 3 ways above worked..
how do i do it properly? thanks
Click to expand...
Click to collapse
Can you tell me how exactly are you doing? Give out details including if you are using root explorer , giving root rights etc
STEP BY STEP
Hnk1 said:
Can you tell me how exactly are you doing? Give out details including if you are using root explorer , giving root rights etc
STEP BY STEP
Click to expand...
Click to collapse
things i've done (i use root browser to move files , i changed permissions of the audio file to rw-r--r--)
#1
download preferred audio (.mp3 & .ogg, tried both)
moved audio file to "system/media"
reboot to check if it'll work
(tried using file names "bootaudio.mp3 , bootaudio.ogg, boot_audio.mp3 & boot_audio.ogg"
failed
#2
download preferred audio (.mp3 & .ogg, tried both)
moved audio file (.wav) to "system/etc"
reboot to check if it'll work
(tried using file names "PowerOn.wav , PowerOn.mp3 , PowerOn.ogg , bootaudio.mp3 , bootaudio.ogg, boot_audio.mp3 & boot_audio.ogg"
failed
btw, ur reply is much appreciated
Manersky.IA said:
things i've done (i use root browser to move files , i changed permissions of the audio file to rw-r--r--)
#1
download preferred audio (.mp3 & .ogg, tried both)
moved audio file to "system/media"
reboot to check if it'll work
(tried using file names "bootaudio.mp3 , bootaudio.ogg, boot_audio.mp3 & boot_audio.ogg"
failed
#2
download preferred audio (.mp3 & .ogg, tried both)
moved audio file (.wav) to "system/etc"
reboot to check if it'll work
(tried using file names "PowerOn.wav , PowerOn.mp3 , PowerOn.ogg , bootaudio.mp3 , bootaudio.ogg, boot_audio.mp3 & boot_audio.ogg"
failed
btw, ur reply is much appreciated
Click to expand...
Click to collapse
Try the following methods
http://forum.xda-developers.com/showthread.php?t=1420991
http://forum.xda-developers.com/showthread.php?t=1096068
http://forum.xda-developers.com/showthread.php?t=1678540

[Q] Touch Sound

HI guys,
How can i change default sound ??
Problem Solved
Sid8802349807 said:
HI guys,
How can i change default sound ??
Click to expand...
Click to collapse
Download the touch sound and ES FILE MANAGER (just given example or use any other ROOT EXPLORER). Check that your NEW TOUCH SOUND in .ogg format. if not then just make it (by renaming and adding .ogg). Rename it as "TW_Touch.ogg" (without"). Copy it to /system/media/audio/ui. this will change your touch sound to the new touch sound copied. Then REBOOT it. Now the sound which we hear after pressing the HW KEYS (back and menu key) will be different. if you want to make it same as touch sound then rename it to S_HW_Touch.ogg and follow the same methord as above and your problem will be solved. DONT FORGET TO HIT THE THANKS BUTTON IF I HELPED YOU! :highfive:

Categories

Resources