Related
Hi am trying to reinstall from scracth to my HTC one i am a total Noob i admit and think i have Bricked my phone Help me out .
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.161.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35AW901680
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
VODAP001 = CID
3.63.161.6 = Version Main
also when i run boot loader to install rom i keep getting the message
FAILED (remote: 12 signature verify fail)
finished. total time: 84.256s
Don't worry it can be fixed , same issue I had before , first tell me can are you unlock , temporary ????
HTC One M7 ( International )
relocked
I relocked the phone with fastboot
Stuck at bootloader Screen Help
have tryed numerous ways to get back to stock and cannot need help thanks
pely15967 said:
OTA_M7_UL_JB43_SENSE55_MR_Vodafone_UK_3.63.161.6-2.24.161.1_release_340013akpd6pd8gw00infp
the above RUU his what i get the errors with also and the original RUU that i got from downloading the update but i accidently deleted sorry
Click to expand...
Click to collapse
1- go back to your post and remove IMEI, that shouldnt be shared online.
2- an OTA is not a RUU.... there is now way to flash an OTA!!
3- there is no ruu for you
4- go unlock your bootloader again
5- what's the whole point of this exercise?
unlocked
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
pely15967 said:
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
Click to expand...
Click to collapse
5- what's the whole point of this exercise?
pely15967 said:
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
Click to expand...
Click to collapse
You need to flash custom recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
when you get in TWRP you need to adb sideload a rom
TWRP / Advanced / Sideload
From PC adb /fastboot folder
you use
adb sideload guru_reset_m7_2-24-161-1-zip
you get it here >> http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
When installing the Reset choose Yes to install stock recovery and No to Root
this will allow you to take the OTA update. After setting up your phone takeing all the OTA updates
then flash back your custom recovery and Root
nkk71 said:
5- what's the whole point of this exercise?
Click to expand...
Click to collapse
I think he tried to install the OTA as a ruu and it borked his phone
rumrunner error
C:\Users\Paul\Desktop\fastboot>fastboot flash zip hboot_rumrunner_2.24_401.8.zip
sending 'zip' (517 KB)...
OKAY [ 0.232s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 0.475s
am i doing something wrong ?
pely15967 said:
C:\Users\Paul\Desktop\fastboot>fastboot flash zip hboot_rumrunner_2.24_401.8.zip
Where did this come from ????
What Happened to the Guru reset I linked you
sending 'zip' (517 KB)...
OKAY [ 0.232s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 0.475s
am i doing something wrong ?
Click to expand...
Click to collapse
Why are you flashing a custom Hboot ?
download stuck
TWRP 2.6.3.3 download is stook at 99.99% any other place to download the file ?
Sorry clsA didnt see your post thanks for the links will try sort my mess up thanks will let you know how it goes thanks once again
pely15967 said:
TWRP 2.6.3.3 download is stook at 99.99% any other place to download the file ?
Sorry clsA didnt see your post thanks for the links will try sort my mess up thanks will let you know how it goes thanks once again
Click to expand...
Click to collapse
here's my TWRP
https://www.dropbox.com/s/bzep2vfb5pphr45/openrecovery-twrp-2.6.3.3-m7.img
back to TWRP
have put the guru rest rar into fastboot folder when i go to sideload it gives me 2 options
1 wipe Delvik Cache
2 wipe cahe
sorry i am a total Noob at this
pely15967 said:
have put the guru rest rar into fastboot folder when i go to sideload it gives me 2 options
1 wipe Delvik Cache
2 wipe cahe
sorry i am a total Noob at this
Click to expand...
Click to collapse
check both and swipe to begin sideload
and it's gurureset.zip not rar
from command prompt on pc
adb sideload gurureset.zip
Didn't I already say all this ?
when you get in TWRP you need to adb sideload a rom
TWRP / Advanced / Sideload
From PC adb /fastboot folder
you use
adb sideload guru_reset_m7_2-24-161-1.zip
Click to expand...
Click to collapse
errors
tryed wiping the cache and get errors show in picture
pely15967 said:
tryed wiping the cache and get errors show in picture
Click to expand...
Click to collapse
so try again and don't choose wipe cache
still getting errors
Sorry but i am still geting the same errors in ADB sideload even with not wiping the caches
pely15967 said:
Sorry but i am still geting the same errors in ADB sideload even with not wiping the caches
Click to expand...
Click to collapse
then you need to
adb push guru_reset_m7_2-24-161-1.zip /sdcard/
I'm assuming that's the name of your file, if not correct it
push
Think i have pushed the Guru zip but when i goto install in TWRP i get what his shown in the picture what do i need to do now ? no matter how long i wait it his still saying the same do i reboot phone ? then go back nto recovery ?
rebooted
Rebooted back into recovery and the push didnt work managed to delete all cache and got sideload to load up on phone but just my luck it wont work in dos window
I mistakenly wiped the htc one m7 trying to install a rom based off kit kat I believe. Well, now I have no radios listed at all on the boot screen. I followed the tutorial on the forum for using fast boot to reflash the boot I believe. Process involved an older boot, which didn't flash with an error. I successfully flashed the latest 4.06 version of boot which was successful.
The thread went on to say I should start with the stock rom. Couldn't get it to load with adb side loader or fast boot flash zip name.zip. I have been able to successfully side load viper one, the latest version, and I have the latest version of terp as the recovery.
My problem is the phone will stay on no more than 15 sec. Before it reboots. I cannot see it in my computer although it shows up in device manager. I installed the latest driver from a thread on here.
Seems my options are fast boot and side loader, but I get a signed verification fail when I try to fast boot the radio , also taken from a radio thread here. I'm pretty sure I need s off which is the only thing left. Would this cause the phone to reboot continuously?
I'm tired of messing with it is it time to trash it or is this fixable? Thanks in advance and I'll give any info you guys need to help.
Latest Sprint Radio
from fastboot getvar
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C4S903734
(bootloader) imei: 990004288501756
(bootloader) meid: 99000428850175
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3796mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
I dont know if this helps or not.
This is what I get from fastboot when I try to load the radio...
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot flash radio Rad
io_HTC.zip
sending 'radio' (18554 KB)...
OKAY [ 2.250s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 5.500s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
This is where I was last night. After searching on the threads, it seems that flashing hboot is ok, but the radios cannot be flashed without S-OFF. At this point what are my options as far as getting this radio in.
It did this auto reboot every 10-15 sec. the minute i flashed the improper rom. Again I've tried fixing with thread guidance on here for softbricking a Sprint device by flashing an ATT, etc. device.
Please help. Are there people you can call to undo damage like this or are you stuck fixing yourself?
Thanks
tpan1983 said:
This is what I get from fastboot when I try to load the radio...
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot flash radio Rad
io_HTC.zip
sending 'radio' (18554 KB)...
OKAY [ 2.250s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 5.500s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
This is where I was last night. After searching on the threads, it seems that flashing hboot is ok, but the radios cannot be flashed without S-OFF. At this point what are my options as far as getting this radio in.
It did this auto reboot every 10-15 sec. the minute i flashed the improper rom. Again I've tried fixing with thread guidance on here for softbricking a Sprint device by flashing an ATT, etc. device.
Please help. Are there people you can call to undo damage like this or are you stuck fixing yourself?
Thanks
Click to expand...
Click to collapse
if you are using fastboot the radio has to be an image file, not a zip, or a boot.img, or get a radio zip file and flash from recovery.
54594563 3255
Aldo101t said:
if you are using fastboot the radio has to be an image file, not a zip, or a boot.img, or get a radio zip file and flash from recovery.
Click to expand...
Click to collapse
Woops typo. So, what I was doing was opening the .zip, and there are two files. A .inf I believe, and the image file (which Windows recognizes as such). I'm copying and pasting this file in the folder with the tools and fastbooting the .img with the command
fastboot devices
I see the phone serial and fastboot
fastboot flash radio radio.img
I get the error I posted before...
I would like to explore flashing from recovery. Given my situation is this possible? Also, do the stock ROMs, the RUU I believe, does it have the radio installed?
The link BD Posted here are flashable zips for recovery install
Sent from my HTCONE using Tapatalk
Hi Guys
i think i really messed up my HTC one first of all here's the screen details on the boot loader
and I'm a complete noobie on android and this is phone is my frist android device
****UNLOCKED****
M7_UL PVT SHIP S-OFF RH
CID-HTC__044
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Apr 25 2014
PC: Windows 7 Ultimate
The story is I tried to root my device using this tutorial in youtube from zedomax
and it was a success without trouble,
So I tried to install a custom ROM ViperOne_6.2.0.zip
and its where everything got messed up when the installation returned an error during installation
I tried reinstalling and i think i wiped all the data on the storage including the backup using the TWRP wipe button including OS files
after several attempts i was able to re enter TWRP and/or CWP trying to install via Sideload command but failed
i cant load zip files via my PC too because my pc cant read/write the storage of my phone. (I installed USB drivers and phone is detectable on device manager)
now the bootloader have this error Active cmdline overflow! (1094 Bytes)
Since I'm a real newbie in android may I kindly ask a step-by-step instruction on how can i recover if possible from this trouble.
I would really appreciate everyone's help from this forum.
here's a guide to fix that active cmdline overflow, you messed up one of your partitions and your phone wont work until you fix that issue, you need to follow that guide to the letter, do not skip any parts, read it all first and understand it, if you get any of the commands wrong you could end up with a complete brick so copy and paste them.
http://forum.xda-developers.com/showthread.php?t=2739126
Thank you for the quick reply,
I tried to install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly
when I erased cache then rebooted the fast booth, the "Active cmdline overflow! (**** Bytes)" error was gone
but when i enter recovery, it reboots again to fastboot and the error reappears.
and the cycle repeats again.
I can't get past this
one more thing...I noticed that you used a different adb C:\ADB3> is there a version 3 or is it just a folder name?
when I try to detect device in fastboot:
D:\HTCOne recover\HTCOneRoot>fastboot devices
FA32GW9**** fastboot
but when i try to use the same command on adb:
D:\HTCOne recover\HTCOneRoot>adb devices
List of devices attached
nothing on the list. And ADB commands don't work because it can't recognize the device.
I really need your help. Thanks in Advance
I would like to add that I can't access the phone storage through my PC
one more thing...
how would I know if i got these?
from the guide
"Well you need adb commands, root and busybox... which are only available in a custom recovery or a rooted ROM (with USB debugging enabled)"
1. adb commands
2. root and
3. busybox
4. custom recovery or a rooted ROM (with USB debugging enabled)
which are only available in a custom recovery or a rooted ROM (with USB debugging enabled)"
WilmanB said:
Thank you for the quick reply,
I tried to install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly
when I erased cache then rebooted the fast booth, the "Active cmdline overflow! (**** Bytes)" error was gone
but when i enter recovery, it reboots again to fastboot and the error reappears.
and the cycle repeats again.
I can't get past this
one more thing...I noticed that you used a different adb C:\ADB3> is there a version 3 or is it just a folder name?
Click to expand...
Click to collapse
have you restored mmcblk0p19 like said in the guide?
but when i try to use the same command on adb:
D:\HTCOne recover\HTCOneRoot>adb devices
List of devices attached
nothing on the list.
and ADB commands don't work because it can't recognize the device.
I really need your help. Thanks in Advance
I would like to add that I can't access the phone storage through my PC
Click to expand...
Click to collapse
adb only works from custom recovery or from a booted rom with usb debug on. adb will not works from bootloader and you will not see phone storage from bootloader.
alray said:
have you restored mmcblk0p19 like said in the guide?
Click to expand...
Click to collapse
but adb does not recognize my phone so i cant restore mmcblk0p1 like it says on the instruction
adb wont respond to any adb commands
but fastboot is responsive
"adb only works from custom recovery or from a booted rom with usb debug on."
how do i do this? How will I know if I'm running in a booted ROM with USB debug On?
I install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly but it wont enter recovery mode
First of all you will know if you are running a booted Rom if your phone boots up lol, in your case, yours doesn't, so ignore this and usb debugging.
Fastboot commands only work in bootloader.
Adb commands for you will only work inside recovery.
You must get into recovery to use adb to fix your phone, the reason you apprear to not be able to get in is because of your hboot version, you need to downgrade it, however I leave this completely in your hands and won't be held responsible if you brick your phone, simply, if you flash even the slightest wrong hboot, you'll have a brick, read the rest of that thread after the instructions, your same issue is in that thread.
WilmanB said:
but adb does not recognize my phone so i cant restore mmcblk0p1 like it says on the instruction
adb wont respond to any adb commands
but fastboot is responsive
Click to expand...
Click to collapse
ADB commands = Usable from custom recovery mode or from a normally booted phone (not your case)
FASTBOOT commands = Usable only from bootloader, where you currently are. You can't use adb here
"adb only works from custom recovery or from a booted rom with usb debug on."
how do i do this? How will I know if I'm running in a booted ROM with USB debug On?
Click to expand...
Click to collapse
flash the nobcb verison of twrp, boot in recovery and then you'll be able to use ADB commands.
I install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly but it wont enter recovery mode
Click to expand...
Click to collapse
Code:
fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img
fastboot erase cache
fastboot reboot-bootloader
then try to boot in recovery mode again.
if you are still not able to boot the nobcb recovery, better to ask in the thread Seanie280672 linked you
Wow, thank you all very much. I am now able to enter recovery mode using HBOOT -1.44.0000 through CWT recovery
no more cmdline overflow.
and I'm done restoring mmcblk0p19
now i just need to find the correct RUU to flash I need your help again guys? I'm not really sure what RUU to flash or what to do next from here
WilmanB said:
Wow, thank you all very much. I am now able to enter recovery mode using HBOOT -1.44.0000 through CWT recovery
no more cmdline overflow.
and I'm done restoring mmcblk0p19
now i just need to find the correct RUU to flash I need your help again guys? I'm not really sure what RUU to flash or what to do next from here
Click to expand...
Click to collapse
post the output of "fastboot getvar all" excluding imei and serialno and we'll be able to tell you what ruu you can use.
alray said:
post the output of "fastboot getvar all" excluding imei and serialno and we'll be able to tell you what ruu you can use.
Click to expand...
Click to collapse
@elray
Thanks for replying these are what i got from the getvar command
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.707.1
version-misc: PVT SHIP S-OFF
serialno: FA32GW9*****
imei: 3558590500*****
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: HTC__044
battery-status: good
battery-voltage: 4318mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
I wish you can locate a proper RUU for my device.
I would also like to ask if it is possible to install custom ROM on my phone.
I tried to install the ViperOne 6.2.0 and Android Revolution HD 71.1 but it's both unsuccessful
now I'm stuck on Android 4.2.2 in HTC Sense 5 because i can't install new updates to KitKat and Sense 6
WilmanB said:
@elray
Thanks for replying these are what i got from the getvar command
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.707.1
version-misc: PVT SHIP S-OFF
serialno: FA32GW9*****
imei: 3558590500*****
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: HTC__044
battery-status: good
battery-voltage: 4318mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
I wish you can locate a proper RUU for my device.
I would also like to ask if it is possible to install custom ROM on my phone.
I tried to install the ViperOne 6.2.0 and Android Revolution HD 71.1 but it's both unsuccessful
now I'm stuck on Android 4.2.2 in HTC Sense 5 because i can't install new updates to KitKat and Sense 6
Click to expand...
Click to collapse
http://www.htc1guru.com/dld/ruu-zip-m7_u_asia_wwe_custom_guruu_3-63-707-4-zip/
or any other ruu if you change your mid/cid
alray said:
http://www.htc1guru.com/dld/ruu-zip-m7_u_asia_wwe_custom_guruu_3-63-707-4-zip/
or any other ruu if you change your mid/cid
Click to expand...
Click to collapse
Sorry @alray but the file in your link returned an error while flashing
3x to flash without rebooting, returned this error:
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.103s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.549s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.183s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.610s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.112s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.540s
D:\HTCOne recover\HTCOneRoot>fastboot reboot
rebooting...
finished. total time: 0.038s
I think the RUU file is incompatible with my device that's why it wont proceed.
this is the filename:
RUU Zip M7_U_Asia_WWE_Custom_GuRUU_3.63.707.4.zip
Android.txt
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
mainver: 3.63.707.4
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
WilmanB said:
Sorry @alray but the file in your link returned an error while flashing
3x to flash without rebooting, returned this error:
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.103s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.549s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.183s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.610s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.112s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.540s
D:\HTCOne recover\HTCOneRoot>fastboot reboot
rebooting...
finished. total time: 0.038s
I think the RUU file is incompatible with my device that's why it wont proceed.
this is the filename:
RUU Zip M7_U_Asia_WWE_Custom_GuRUU_3.63.707.4.zip
Android.txt
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
mainver: 3.63.707.4
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
Click to expand...
Click to collapse
was your phone in ruu mode?
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
alray said:
was your phone in ruu mode?
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
yes sir it was in ruu mode. the one with green HTC logo and black background.
WilmanB said:
yes sir it was in ruu mode. the one with green HTC logo and black background.
Click to expand...
Click to collapse
try this one: http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
otherwise, change your mid and cid and try to flash another version ruu.
I can't install any recovery TWRP from version 2.7.x.x+, etc, I can install, but when I try run recovery I see only Entering recovery, black screen for few seconds then again entering recovery and htc logo. When I install twrp 2.6.3.3 all works perfectly, I don't know what is wrong.. I trying fastboot metod and comend fastboot erase cache, didn't help. What Can I do now? I Try use flashify and more more more, I have a root, unlock bootloader, s-on. When I try instalation cwm or cwm touch the newest is the same problem, but I need this twrp, because I wanna try new rom port from Oneplus One.
THANK U VERY MUCH MAJMOZ AND ALRAY! If u will know how to install twrp 2.7.0.0+, message me
schizyk12 said:
I can't install any recovery TWRP from version 2.7.x.x+, etc, I can install, but when I try run recovery I see only Entering recovery, black screen for few seconds then again entering recovery and htc logo. When I install twrp 2.6.3.3 all works perfectly, I don't know what is wrong.. I trying fastboot metod and comend fastboot erase cache, didn't help. What Can I do now? I Try use flashify and more more more, I have a root, unlock bootloader, s-on. When I try instalation cwm or cwm touch the newest is the same problem, but I need this twrp, because I wanna try new rom port from Oneplus One.
Click to expand...
Click to collapse
Don't know why they are failing but 2.7.0.0 and 2.7.1.0 have caused problems before. And some people say that 2.7.1.1 can cause issues, I didn't have issue with it but not all phones are created equal. You can try 2.7.1.2, I have used it for the past month or so. I read the OP on the port and they stated the lastest TWRP but you could try the 2.6.3.3 if you cannot get the others to work. I am also assuming that you have a GSM phone not Sprint or Verizon.
majmoz said:
Don't know why they are failing but 2.7.0.0 and 2.7.1.0 have caused problems before. And some people say that 2.7.1.1 can cause issues, I didn't have issue with it but not all phones are created equal. You can try 2.7.1.2, I have used it for the past month or so. I read the OP on the port and they stated the lastest TWRP but you could try the 2.6.3.3 if you cannot get the others to work. I am also assuming that you have a GSM phone not Sprint or Verizon.
Click to expand...
Click to collapse
I try everyone, 2.7.1.3 beta also, everyone.. ;< What Can I do? 2.7.0.0+ and bootlop on htc logo when I try run recovery with inscription entering recovery.. I try flashify, fastboot and many aplications from play store to flash recovery. :< Can I flashed this rom, port from oneplus one other metod?
schizyk12 said:
I try everyone, 2.7.1.3 beta also, everyone.. ;< What Can I do? 2.7.0.0+ and bootlop on htc logo when I try run recovery with inscription entering recovery.. I try flashify, fastboot and many aplications from play store to flash recovery. :< Can I flashed this rom, port from oneplus one other metod?
Click to expand...
Click to collapse
Post a fastboot getvar all except the imei and serialno. What computer are you using Win 7 or Win 8?
majmoz said:
Post a fastboot getvar all except the imei and serialno. What computer are you using Win 7 or Win 8?
Click to expand...
Click to collapse
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
schizyk12 said:
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
Click to expand...
Click to collapse
Microsoft Windows XP [Wersja 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Adam>cd C:\fastboot
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4118mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
C:\fastboot>
schizyk12 said:
I use old computer with windows xp, because I post in the official twrp thread, I'm im collage and I use only tablet and phone.
Click to expand...
Click to collapse
Lets check the basics:
** Double check the MD5 of the recovery to see if it downloaded properly
** Place the recovery.img in the adb/fastboot folder
** Fast boot is disabled in Settings >> Power >> Fast boot
** Boot into Bootloader/FASTBOOT USB
** Type: fastboot devices
You should see your device listed.
** Type: fastboot flash recovery <file-name>.img Replace file name with the actual recovery name.
** Type: fastboot erase cache
** Type: fastboot reboot-bootloader
Now check to see if it worked!
majmoz said:
Lets check the basics:
** Double check the MD5 of the recovery to see if it downloaded properly
** Place the recovery.img in the adb/fastboot folder
** Fast boot is disabled in Settings >> Power >> Fast boot
** Boot into Bootloader/FASTBOOT USB
** Type: fastboot devices
You should see your device listed.
** Type: fastboot flash recovery <file-name>.img Replace file name with the actual recovery name.
** Type: fastboot erase cache
** Type: fastboot reboot-bootloader
Now check to see if it worked!
Click to expand...
Click to collapse
All installation complete final 100%. But twrp doesn't work ;<
schizyk12 said:
All installation complete final 100%. But twrp doesn't work ;<
Click to expand...
Click to collapse
Let try flashing the stock firmware for your phone.
** Find the unlock code you got from HTCDev when you unlocked your bootloader - "Unlock_code.bin" and place in your fastboot folder
** Download stock_firmware 5.11.401.10.zip and rename "firmware.zip" then place in your fastboot folder. Check the MD5: 3b7b13b52f75ed516c888b827710f29a
** Backup your phone to include all of your personal data and copy the files off of your phone.
** Put your phone in bootloader/FASTBOOT USB
Code:
fastboot erase cache
Code:
fastboot oem lock
Code:
[B][I]fastboot oem rebootRUU[/I][/B]
Note: You will see a silver HTC logo on the phone screen
Code:
fastboot flash zip firmware.zip
Note: This will fail with a please flush again message; repeat the same command:
Code:
fastboot flash zip firmware.zip
Note: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Code:
fastboot reboot-bootloader
Note: We need to unlock your bootloader to flash the custom recovery. Using your previous code:
Code:
fastboot flash unlocktoken Unlock_code.bin
Now you should try to flash TWRP, I would try 2.7.1.1 or 2.7.1.2
Hopefully by flashing the stock firmware, it will clean up past flashes to allow the custom recovery to work.
But i'm s-on. I have unlock bootloader, but I Have s-on and I dont know my unlock Code, because before me whose had my HTC and he unlock my device
Any idea?
schizyk12 said:
But i'm s-on. I have unlock bootloader, but I Have s-on and I dont know my unlock Code, because before me whose had my HTC and he unlock my device
Click to expand...
Click to collapse
Here is a step by step guide to unlock your HTC One. There is also a video of the process here. It is pretty straight forward and if you encounter a problem just ask.
But I dont have unlock code and I cant get it
majmoz said:
Here is a step by step guide to unlock your HTC One. There is also a video of the process here. It is pretty straight forward and if you encounter a problem just ask.
Click to expand...
Click to collapse
But I dont have unlock code, and I cant get it
schizyk12 said:
But I dont have unlock code, and I cant get it
Click to expand...
Click to collapse
The procedure in my last post is for getting the code after you flash the firmware!
majmoz said:
The procedure in my last post is for getting the code after you flash the firmware!
Click to expand...
Click to collapse
Hello! I try do it, but I can't flash this firmware. I try few time and I saw only error. What Can I do? I relock my bootloader, and next lock again, but it didn't help.
schizyk12 said:
Hello! I try do it, but I can't flash this firmware. I try few time and I saw only error. What Can I do? I relock my bootloader, and next lock again, but it didn't help.
Click to expand...
Click to collapse
What was the error and when did you get it? Did it look like this:
Code:
sending 'zip' (71868 KB)...
OKAY [4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
If so, then this is expected. You just need to run the command again.
Code:
fastboot flash zip firmware.zip
If not, can you post the error so we can see it?
majmoz said:
What was the error and when did you get it? Did it look like this:
Code:
sending 'zip' (71868 KB)...
OKAY [4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
If so, then this is expected. You just need to run the command again.
Code:
fastboot flash zip firmware.zip
If not, can you post the error so we can see it?
Click to expand...
Click to collapse
Ok, no problem. I do anything and is the same situation. Look post down.
schizyk12 said:
I have a big prolem ;< all is okay, flash succesed. Green line 100%, reboot-bootloader
and I try boot into recovery, and screen is black, soo volume down+power, and I can't now boot into bootloader mode, device only boot again and try run, But I Have a custom rom, and device can't boot to firmware, soo I must run it in bootloader mode and Try install recovery.
Click to expand...
Click to collapse
Nevermind, but all of your instruction done, I boot into bootloader mode and flash twrp, again entering recovery, 2-3sec black screen, and again entering recovery every time..
schizyk12 said:
Nevermind, but all of your instruction done, I boot into bootloader mode and flash twrp, again entering recovery, 2-3sec black screen, and again entering recovery every time..
Click to expand...
Click to collapse
After the firmware update you have to unlock your bootloader before you can install TWRP. Follow this guide for unlocking your bootloader. It was in my earlier post. After you unlock the bootloader, reboot the phone into bootloader/FASTBOOT USB:
Code:
[B][I]fastboot devices[/I][/B]
** You should see your device listed.
Code:
[B][I]fastboot flash recovery <file-name>.img[/I][/B]
** Replace file name with the actual recovery name.
Code:
fastboot erase cache
fastboot reboot-bootloader
Over the weekend my phone died and somehow it got stuck in boot loop with tempered flag, I reflashed the recovery from TWRP to Clockwork and factory reset, it returned back to stock..sort of.
Everything had been slow ever since the latest OTA, hence the unlock, root and recovery change but I didn't flash any rom. Until today. I tried flashing "Android Revolution HD 81.0"
Now it won't boot through, at most I get now is bootloader/fastboot/recovery or stuck on green HTC screen.
I tired using RUU via exe (can't find zip because htc1guru.com appears to be down) and it gets stuck at checking header 5%
Issues: S-ON/Hboot 1.57/No USB Debug=no adb=no firewater
I've followed every how-to there is, but all of them require USB debug in some way, I can't get into the phone to get it down, therefore adb doesn't work. at most I have are fastboot commands.
Im at my wits. I just want to get it back to stock, to do that I would need S-off or even just have a RUU that works. This is the RUU:
RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3.exe
I've relocked it prior to update RUU but it didn't make a difference except preventing me to enter recovery for other tasks.
ANY help is appreciated
Here are my fastboot getvar all info:
C:\AndroidSDK\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXX
(bootloader) imei:XXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.108s
Click to expand...
Click to collapse
PlinXoom said:
Over the weekend my phone died and somehow it got stuck in boot loop with tempered flag, I reflashed the recovery from TWRP to Clockwork and factory reset, it returned back to stock..sort of.
Everything had been slow ever since the latest OTA, hence the unlock, root and recovery change but I didn't flash any rom. Until today. I tried flashing "Android Revolution HD 81.0"
Now it won't boot through, at most I get now is bootloader/fastboot/recovery or stuck on green HTC screen.
I tired using RUU via exe (can't find zip because htc1guru.com appears to be down) and it gets stuck at checking header 5%
Issues: S-ON/Hboot 1.57/No USB Debug=no adb=no firewater
I've followed every how-to there is, but all of them require USB debug in some way, I can't get into the phone to get it down, therefore adb doesn't work. at most I have are fastboot commands.
Im at my wits. I just want to get it back to stock, to do that I would need S-off or even just have a RUU that works. This is the RUU:
RUU_M7_UL_K44_SENSE55_MR_BrightstarUS_WWE_4.19.1540.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_353887_signed_3.exe
I've relocked it prior to update RUU but it didn't make a difference except preventing me to enter recovery for other tasks.
ANY help is appreciated
Here are my fastboot getvar all info:
Click to expand...
Click to collapse
You must flash ARHD using TWRP 2.6.3.3
you can not use older RUU version to restore your phone with S-ON
You can restore your phone back to stock using a nandroid backup of your version and then flash the stock recovery back.
USB debugging is only needed to use ADB when the phone is booted in the OS. Or you can also use ADB from custom recovery even if USB debug is NOT turned on.
So depending what your goal is you should try to either flash TWRP 2.6.3.3 and reflash ARHD or restore your phone using a nandroid backup if the latest dev edition software.
PlinXoom said:
Over the weekend my phone died and somehow it got stuck in boot loop with tempered flag, I reflashed the recovery from TWRP to Clockwork and factory reset, it returned back to stock..sort of.
Everything had been slow ever since the latest OTA, hence the unlock, root and recovery change but I didn't flash any rom. Until today. I tried flashing "Android Revolution HD 81.0"
Now it won't boot through, at most I get now is bootloader/fastboot/recovery or stuck on green HTC screen.
I tired using RUU via exe (can't find zip because htc1guru.com appears to be down) and it gets stuck at checking header 5%
Issues: S-ON/Hboot 1.57/No USB Debug=no adb=no firewater
Click to expand...
Click to collapse
alray is correct, you can not flash that RUU because you are S-ON and it is a lower version than your present phone. There is no RUU for your version at the moment only an OTA. Here is the stock firmware for your version. This would give you stock recovery, stock hboot but it may wipe all of your personal data off of the phone. Place the file in your fastboot/adb folder and rename it firmware.zip. Then you would flash it in bootloader/FASTBOOT USB:
Code:
[B][I]fastboot oem lock[/I][/B]
After that, type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot[/I][/B]
Click to expand...
Click to collapse
After the reboot, you can install TWRP and then flash ARHD 81.0.
C:\AndroidSDK\sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 1.146s
C:\AndroidSDK\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.034s]
finished. total time: 0.034s
C:\AndroidSDK\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (47665 KB)...
OKAY [ 2.657s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 8.713s
C:\AndroidSDK\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (47665 KB)...
OKAY [ 2.653s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 8.709s
C:\AndroidSDK\sdk\platform-tools>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
sending 'zip' (47665 KB)...
OKAY [ 2.653s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 8.710s
C:\AndroidSDK\sdk\platform-tools>
Click to expand...
Click to collapse
I downloaded the file and flashed it, that's what I got.
I went ahead and flashed TWRP 2.6.3.3, that allowed me to have ADB and then I sideloaded the ARHD, now it's working and im setting up.
Question, now that I have the OS back, how should I go about getting S-off and the tampered warning removed. I presume this would save me from loads of trouble down the load. Thanks again in advance.
PlinXoom said:
I went ahead and flashed TWRP 2.6.3.3, that allowed me to have ADB and then I sideloaded the ARHD, now it's working and im setting up.
Question, now that I have the OS back, how should I go about getting S-off and the tampered warning removed. I presume this would save me from loads of trouble down the load. Thanks again in advance.
Click to expand...
Click to collapse
Achieve S-OFF with firewater or sunshine
Download and install this Bootloader Reset Tool
I went ahead and tried with firewater but ran into HTC anti firewater warning. I was told I needed to go back to stock Rom with bulletproof kernel to get it to work then load ARHD after. Being that if I don't intend to change the Rom any time soon, is it worth doing all the swapping around?
PlinXoom said:
I went ahead and tried with firewater but ran into HTC anti firewater warning. I was told I needed to go back to stock Rom with bulletproof kernel to get it to work then load ARHD after. Being that if I don't intend to change the Rom any time soon, is it worth doing all the swapping around?
Click to expand...
Click to collapse
If you develop an issue down the road it is easier to fix with the phone being S-OFF. However, it is a personal choice.
I figured as much, thanks again! :highfive: