Database Develop

[Q] Bricked Bionic !! Serious !!

Hey guys,
I have bionic with 902 radio. Two days ago I wanted to come back from Eclipse 2.2 to stock also 902. Started Bootstrap , wiped files and i picked WRONG file ... :/ flashed Deodexed first stock file :/ .... Now when i turn on bionic it puts me to green android guys that says Welcome Droid Bionic , touch android to begin, when i do it it shows " Please wait, this may take a few minutes" .....Im not lucky already 8 hours ... :/ its still there with notification and does nothing ..... I can connect USB and put files on SD card and phone is seen on PC. I tried to go into fastboot and thru RSD Lite flash over stock FXZ file BUT when I connect in AP Fastboot mode (S) my phone is not seen on PC.....when i go into SBF mode its seen as Motorola Flash Module Interface....:|
Now i dont know what to go .... I can start phone holding volume buttons and pick recovery ( i put Eclipse rom back on SD CARD but it doesnt want to flash , it says that there is problem with signature)....
So I dont know what to do ....I ask YOU guys for help ....I hope its not THE END of my bionic .....

Nope...its not the end
You need to use RSDlite 5.6 with the full 902 xml file.
Make sure you have the latest moto-drivers (5.4 or 5.5) installed on your PC.
Make sure you are using the cable that came with your phone when using RSDlite.
If you want to save your internal sdcard...there is an edited file that timmy10shoes made.
I can dropbox all these items for you except, the full 902 xml file.
Or you can get all the files here... http://www.droidforums.net/forum/droid-bionic-hacks/202176-detailed-safestrap-instructions.html

I have cable that came with phone but i even reinstalled system from win 7 64 to 32... and still NOTHING
and yes can u drop box it ?

try plugging it in from the back of the pc. sometimes secondary usb hosts dont work. that was my problem for a while lol.

tyracz said:
I have cable that came with phone but i even reinstalled system from win 7 64 to 32... and still NOTHING
and yes can u drop box it ?
Click to expand...
Click to collapse
I am at work right now and I might not find the time to look through my dropbox.
But everything is at that website. Just go over there are start downloading the files. The full 902 xml file is going to take awhile.
---------- Post added at 01:40 PM ---------- Previous post was at 01:39 PM ----------
HorsexD said:
try plugging it in from the back of the pc. sometimes secondary usb hosts dont work. that was my problem for a while lol.
Click to expand...
Click to collapse
Great point. I guess, I just figured he tried all usb ports.

yes i did try all of them .... i hav 5.4.0 drivers and nothing :| sees phone in SBF mode but not in FastBoot :/
Dont upload anything on dropbox cuz i already have all the files....
Ap Fastboot Flash Menu Mode (S) ..... and pc doesnt see phone :/

Go here...http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
Try the 5.5 drivers
How old is your PC?
Sometimes Rsdlite might just say connected and wont say anything about the device that is connected.
Have you tried to run Rsdlite 5.6?
---------- Post added at 03:05 PM ---------- Previous post was at 02:55 PM ----------
Also, run rsdlite as administrator: right click, properties, compatiblty, run as admin, apply

Its new, i7 , 8gb ram ..... I downloaded those drivers u gave me ....i tried 3 RSD

Tried Rsdlite 5.6 and running as administrator?
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
1. start RSDLite 5.6 (have rsdlite on desktop)
2. turn phone off
3. press and hold the volume down and power button at the same time on the phone. The fastboot menu will appear.
4. plug your bionic into your computer with the cable.
5. Click on RSDLite, you should see your phone listed.
6. click on your phone to highlight.
7. click on "..." symbol.
8. navigate to the 5.9.902 file location and select that file.
9. select uncompress and start flashing.

I did how you wrote untill RSD start....yes its running as admin and my phone doesnt show on list ..... nothing like that ....i know how to do it, my biggest problem is that in Fastboot mode my phone is invisible for PC :/ and i have win 7 32bit....

I switched USB cables.... LOL !!! Motorola supply ppl with bad cables ?:| I used one from Blackberry and it works on it .... OMG !!! flashing and i will see where i finish.....
P.S
I switched .exe file compability mode to Windows XP SP 2 and i chose to run it all the time as Admin....
p.s
its stuck on 2/22.....LOL im still waiting ...

How long it been stuck?

It fails on 2/22 ....Failed flashing process. Failed flashing 2/22 reboot-bootloader > No arrival message notification, phone disconnected.....

Ok. Stop. We dont want the battery to die.
You either need to use a different pc or moto-fastboot the images.
I can help with the moto-fastboot if ya have time.

yes i do have time, how it works ?

You have google talk on your pc? can you get it? Pm your user name if ya can/do.

Cant put my x8 to flashmode ..y x8 to flashmode

As the title says guys, i cant put my x8 to flashmode ... when Im pressing the back button , and im pluging in my phone to computer , the Green flashmode diod its not appearing ... a also cant connect my x8 to computer even though i installed latest PCC. Yes i did full wipe and also install another ROM but it doesnot help Really guys please help me with my problem because im running out of ideas what to do ..

Did You install drivers from Flashtool folder?
And - does Your x8 recognize the charger? Cause maybe USB port is damaged.

i did install Gordon's Gate..
Well when i plug in the cable my x8 is charging ..
i also tried to connect my brother x8 to the computer but the same thing happens , i cant enter flashmode and i cant see my sdcard ..
oh yea i forgot to add that the same cable its working on my other computer but not working on this one ;(

You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!

sidkota said:
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
Click to expand...
Click to collapse
yes thats exactlly what im doing , yesterday it was working perfectly but now it does not . But the key is that the green light its not appearing.I don't know what is the cause of that.

Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!

sidkota said:
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
Click to expand...
Click to collapse
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately

Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working

Bolussimo said:
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Click to expand...
Click to collapse
i did 3 times

proadi96 said:
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Click to expand...
Click to collapse
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!

sidkota said:
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
Click to expand...
Click to collapse
OK i tried to look for the drivers but as far as i can see they are not there.Hey does PCC still installs the drivers automatically? because some time ago i remember it was , it was actually saying ''installing drivers'' or something like this , but now i downloaded the newest version and there is only install bar , not any other as it was in previous versions ... maybe thats the cause that i dont have proper drivers?

I have this problem too week ago. I tried to connect and disconnect the usb. Didnt work. When i checked again, usb port on my computer didnt mount my usb cable correctly.
thanks for the thanks......
Sent by my sexy orange W8 using XDA app...................

Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...

proadi96 said:
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
Click to expand...
Click to collapse
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s

Pull out all usb connect to pc, uninstall all usb port driver , from system manager, restart pc. plug in you phone.
Sent from my thumb using my eyes

biscoitu said:
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Click to expand...
Click to collapse
everything is falling apart because it stopped working even on my laptop ;/ I removed all the drivers by the program you provided , Now i will restart my PC and see if its working or not
and PS. I dont have original cable for my x8 ! But it was working and now its not ..

[Solved] Help!! Xperia Z bricked after trying to unlock bootloader

[solved] Sorry for my English first, I have been reading thousand thread but with no luck.
My xperia Z is
- locked bootloader
- no root
- didn't install driver properly (I guess)
I was trying to unlock bootloader, but the driver wasn't installed properly somehow as using flashtool even I followed step by step to install. Then, it got stuck for an hour at "Device connected in flash mode". I had to reset the device (power with - volume) with no choice. Now I keep rebooting at the colorful wave after Song logo.
I know flashtool is the only choice for me now, but i can't go in fastboot mode(- volume then plug in usb) because of the bad ADB driver probably. LED is no light (no blue, red, green) at all.
Also, ADB driver that i need to install now, but boot loop on my device is so swift that ADB driver doesn't have enough time to install to my device.
I am stuck at this stage for a few days. Any idea what I should do now???
PS: using latest flashtool

chungjimmybb said:
Sorry for my English first, I have been reading thousand thread but with no luck.
My xperia Z is
- locked bootloader
- no root
- didn't install driver properly (I guess)
I was trying to unlock bootloader, but the driver wasn't installed properly somehow as using flashtool even I followed step by step to install. Then, it got stuck for an hour at "Device connected in flash mode". I had to reset the device (power with + volume) with no choice. Now I keep rebooting at the colorful wave after Song logo.
I know flashtool is the only choice for me now, but i can't go in fastboot mode(+ volume then plug in usb) because of the bad ADB driver probably. LED is no light (no blue, red, green) at all.
Also, ADB driver that i need to install now, but boot loop on my device is so swift that ADB driver doesn't have enough time to install to my device.
I am stuck at this stage for a few days. Any idea what I should do now???
PS: using latest flashtool
Click to expand...
Click to collapse
Since you have a locked BL, Flashtool isn't your only solution...
Install the correct drivers if you haven't already, after that use Sony's updating service to restore your phone.
http://www.sonymobile.com/gb/tools/update-service/

Dsteppa said:
Since you have a locked BL, Flashtool isn't your only solution...
Install the correct drivers if you haven't already, after that use Sony's updating service to restore your phone.
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
I just tried sony's updaing service in which fastboot mode was needed.
Since i install the bad ADB driver, how can i install the driver at this stage? should I install from flashtool?
I did uninstalled the driver and install back again from flashtool. Fastboot mode doesn't seem to response at all means. I actually followed the step by step guide from flashtool thread, but i don't think i install the driver properly somehow.

Flash mode is volume down + connect the usb.
Sent from my C6603 using xda premium

gm007 said:
Flash mode is volume down + connect the usb.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
sorry i wrote it wrong, i did volume - then plug usb

Volume up + power for 15 seconds to shutdown your phone(3 vibrations).
Repair with Sony update service and don't forget volume down.
Or try another pc.
Sent from my C6603 using xda premium

gm007 said:
Volume up + power for 15 seconds to shutdown your phone(3 vibrations).
Repair with Sony update service and don't forget volume down.
Or try another pc.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
thanks for your reply again. Since i don't have another pc, any other means that I can get to the fastboot mode? (I can't install driver to my device properly because of bootloop perhaps)

chungjimmybb said:
thanks for your reply again. Since i don't have another pc, any other means that I can get to the fastboot mode? (I can't install driver to my device properly because of bootloop perhaps)
Click to expand...
Click to collapse
Uhm, the drivers are installed on your PC, it should work on your phone no matter what.
Of course, you need to have installed the correct drivers and in the correct way. Try to reinstall the drivers (Sony Updating service will give you a link if I'm correct, use that one).
After that use another usb port and try it again.

Dsteppa said:
Uhm, the drivers are installed on your PC, it should work on your phone no matter what.
Of course, you need to have installed the correct drivers and in the correct way. Try to reinstall the drivers (Sony Updating service will give you a link if I'm correct, use that one).
After that use another usb port and try it again.
Click to expand...
Click to collapse
Thanks for your reply.
prove me wrong if i say thing wrong. the ADB driver are installed on PC only and will not install on device? if so, no matter what my device status is, it should be able to connect to fastboot mode as long as it has enough battery?
Also, i just checked Sony Updating service that doesn't provide the driver and function like fasttool. Could you kindly send me the link of this driver so as to not screwing this up again?

You don't need fastboot drivers to use sony update service.
Anyway sus should install the drivers for you when you connect the phone by holding volume down.
You should download sus software not using the web update.
When you connect the phone go to device manager on your pc and check if all the drivers are ok and no yellow signs.
Sent from my C6603 using xda premium

gm007 said:
You don't need fastboot drivers to use sony update service.
Anyway sus should install the drivers for you when you connect the phone by holding volume down.
You should download sus software not using the web update.
When you connect the phone go to device manager on your pc and check if all the drivers are ok and no yellow signs.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for your support. I used SUS to install the rom again, but somehow takes - volume + power instead of - volume +plug in usb in fastboot mode. Now, it is back to factory stock rom.

ive the same problem
chungjimmybb said:
Thanks for your support. I used SUS to install the rom again, but somehow takes - volume + power instead of - volume +plug in usb in fastboot mode. Now, it is back to factory stock rom.
Click to expand...
Click to collapse
ive installed update soft. i turn down the volume button and connect the usb then blue light works. upadte soft got my phone. but when conneting it says i cannot update this softwere cause am cotaining modified firmwere.
Now any one can solve this issue!!???
or any other way to to turn on my phone!!??
---------- Post added at 08:07 PM ---------- Previous post was at 08:05 PM ----------
chungjimmybb said:
thanks for your support. I used sus to install the rom again, but somehow takes - volume + power instead of - volume +plug in usb in fastboot mode. Now, it is back to factory stock rom.
Click to expand...
Click to collapse
bro now can u tell me what was ur final procidure? Please bro

saifkhantt said:
ive installed update soft. i turn down the volume button and connect the usb then blue light works. upadte soft got my phone. but when conneting it says i cannot update this softwere cause am cotaining modified firmwere.
Now any one can solve this issue!!???
or any other way to to turn on my phone!!??
---------- Post added at 08:07 PM ---------- Previous post was at 08:05 PM ----------
bro now can u tell me what was ur final procidure? Please bro
Click to expand...
Click to collapse
did you root or unlock bootloader? if so, SUS is not the procedure that you are looking for.

chungjimmybb said:
did you root or unlock bootloader? if so, SUS is not the procedure that you are looking for.
Click to expand...
Click to collapse
SUS doesn't work on unlocked bootloader.

Help with Xiaomi mi5

Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk

Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts

casuk said:
Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If I were you I would definitely flash Lineage OS, its really solid, fast and has a good battery life.
Check this post for instructions. And give him a big thank

Spevky said:
Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts
Click to expand...
Click to collapse
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.

xdadevet said:
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.
Click to expand...
Click to collapse
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?

Spevky said:
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?
Click to expand...
Click to collapse
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.

xdadevet said:
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.
Click to expand...
Click to collapse
It is detected as QDLoader 9008 version of QDLoader 9008

im trying to follow the guides but im not understanding what to do I have downloaded adb and fastboot I extracted the files to a folder and im now stuck, whats this mean
•Append ;%USERPROFILE%\adb-fastboot\platform-tools to the end of the existing Path definition (the semi-colon separates each path entry)
that's were im am so far and im basically lost and need so help if anyone is kind enough to go through the steps with me
thanks
Ok I've unlocked the phone but i can seem to be able to root it

[Solved!] [OnePlus 8 Pro] Problems with OOS 11.0.4.4.IN11AA

I have a OnePlus 8 Pro running Oxygen OS 11.0.4.4.IN11AA. Upon installing Magisk, I can no longer turn Wifi on. I have tried restarting, clearing the cache from recovery, resetting network settings, basically all the things the "wifi wont turn on help pls" guides say to do. Mobile data and bluetooth work absolutely fine, so what's going on?
Sound is also non-functional. Even after plugging in earphones (which worked with this phone previously) nothing comes out, and the phone doesn't even seem to recognize them. I also noticed that after a reboot the volume controls are set back to the defaults.
Additionally, the system is very slow to start up and the screen stays black until after the unlock prompt (which displays over the black screen) and then the wallpaper and everything else loads. (after which the device is responsive as normal)
These problems occurred even without installing any modules or otherwise modifying the device. I'm using the latest version of Magisk, 22.0 (22000).
I originally tried to make a GitHub issue, but it was closed by the bot since I didn't follow the template GitHub never showed me. Also, us non-canary users experience issues too. [mini-rant over]
Sorry if this is a duplicate, the search system appears to be malfunctioning since the updates.
The Fix!
Looks like I'm solving all my problems today. I had a hunch that the culprit was the boot.img which I downloaded--it was corrupt. So I went to OnePlus' site and downloaded the OTA package, extracted the boot.img from that, and flashed it through fastboot. When I rebooted, I was greeted with the beautiful almost old-IOS charging sound, and Wifi!! That boot was quite speedy too!

Hi could you explain how did you reboot your phone i have totally same problem...i tried msm download tool but i cant get my device to show there....could you please tell me how did you put OTA package into phone ? thx
FIXED!
in the end I was able to use MSM Download tool....i just had to manually download Qualcomm drivers so that my phone can be recognized. After that MSM worked and rebooted my phone totally clean. Gosh not gonna root for a while now XD
PS: More fun is that my Windows PC wasn't connected to internet so i had to download everything on my macbook and through USB stick I was bringing all app to Windows.....longest 6 hours of my life

Jaywinik said:
Hi could you explain how did you reboot your phone i have totally same problem...i tried msm download tool but i cant get my device to show there....could you please tell me how did you put OTA package into phone ? thx
Click to expand...
Click to collapse
From fastboot, use the volume keys to select Power Off and then press the power button once. Make sure the phone is unplugged while doing this. Then, with the MSM tool ready on your computer, hold down both buttons on your phone and plug in the cable from the phone to the computer. It should automatically boot into EDL mode, and MSM should say Connected.

My
Jaywinik said:
Hi could you explain how did you reboot your phone i have totally same problem...i tried msm download tool but i cant get my device to show there....could you please tell me how did you put OTA package into phone ? thx
FIXED!
in the end I was able to use MSM Download tool....i just had to manually download Qualcomm drivers so that my phone can be recognized. After that MSM worked and rebooted my phone totally clean. Gosh not gonna root for a while now XD
PS: More fun is that my Windows PC wasn't connected to internet so i had to download everything on my macbook and through USB stick I was bringing all app to Windows.....longest 6 hours of my life
Click to expand...
Click to collapse
When I had to do this I didn't connect the device to the network since I don't trust Windows 10 not to open a billion ports up and use my infrastructure for Microsoft's business. Copying to and from a crappy 2.0 drive sucks!