[OTA] Huawei Mate S Firmware C432B321/C900B321 [MM] [Beta] - FRP Unlock enabled! - Huawei Mate S

A few days ago some users enrolled in MM beta program started receiving new B321 OTA, so I flashed it on top of my B303 MM and so far all good.
Apart from feeling really butter smooth and including WPS Office, Developer Options now again include OEM Unlock option(FRP unlock), solving the no bootloader unlock on MM issue.
Be sure to be on B303 MM stock recovery, extract the \dload folder from zip and place it on root of external SD card;
Get into Advanced Project Menu by dialing *#*#2846579159#*#*
Go to the bottom and select "HOTA Update"
Wait for reboot, EMUI will verify, install and optimize -took about 15 minutes, so be patient.
What I noticed is that on B321 Advanced Project Menu is gone, only standard(*#*#2846579#*#*) is available.
B321 OTA Update: https://mega.nz/#!t5EhnBQK!ewPCJtBvSd3kWOc2DBmL83poB8Lo1oXzHSguE2TIWbo
B303 stock recovery: https://mega.nz/#!Q0dhEZ7Q!stOQ_0oHPfXnMVfBZqBDkq1fEyxUJ8Jrt5z2mUcdYMo

hi, in dload folder, we have two files. which one should we use?

put the hole zip into dload and start the hota-update

Hi.
So i updated to this firmware and got the unlock OEM option, and i unlocked it, got into fastboot mode (well the FRP lock screen that showed b4 when i didn't have the oem unlock option). I did the fastboot unlock process with the oem unlock key i got from Huawei website and it said it unlocked sucessfully, but i have no changes, everytime i try to go into bootloader it says that it is FRP locked :/
Any ideas?

johnwickz said:
Hi.
So i updated to this firmware and got the unlock OEM option, and i unlocked it, got into fastboot mode (well the FRP lock screen that showed b4 when i didn't have the oem unlock option). I did the fastboot unlock process with the oem unlock key i got from Huawei website and it said it unlocked sucessfully, but i have no changes, everytime i try to go into bootloader it says that it is FRP locked :/
Any ideas?
Click to expand...
Click to collapse
Isn't FRP unlock different to bootloader Unlock?

Well basicly i get the same screen as if my phone was still FRP locked :s even tho i enabled oem unlock in dev settings..

johnwickz said:
Well basicly i get the same screen as if my phone was still FRP locked :s even tho i enabled oem unlock in dev settings..
Click to expand...
Click to collapse
You must activate the "Unlock OEM" option, reboot into fastboot and make sure you have "FRP: Unlocked" in red text. Once you confirm this use the bootloader unlock key provided by Huawei.

Well for me it says FRP locked :/ even tho i enabled oem unblock.

johnwickz said:
Well for me it says FRP locked :/ even tho i enabled oem unblock.
Click to expand...
Click to collapse
And from that screen have your run the appropriate command in fastboot using CMD in windows and the key you received from Huaweiupdateextractor?
---------- Post added at 04:42 PM ---------- Previous post was at 04:15 PM ----------
Battery consumption seems a little higher on B321...will need to keep an eye on it over the next few days

If you mean bootload unlock key yeah i have done it. Still only screen i get is FRP locked

johnwickz said:
If you mean bootload unlock key yeah i have done it. Still only screen i get is FRP locked
Click to expand...
Click to collapse
If in fastboot screen(picture, maybe?) you have BL unlocked/FRP locked I understand you have previously unlocked BL while on Lollipop and then somehow FRP re-locked again, maybe wrong TWRP restore...

No thats the thing i didnt have BL unlocked when in lollipop

I have managed to update to b321 from b303 version with little / no issue. Everything seems OK apart from a small annoyance - the haptic feedback for navigation buttons has stopped working. I've checked all settings and all seems OK. This was working fine on b303 so maybe it's a bug? Anyone else experiencing this?

nobbysheep said:
I have managed to update to b321 from b303 version with little / no issue. Everything seems OK apart from a small annoyance - the haptic feedback for navigation buttons has stopped working. I've checked all settings and all seems OK. This was working fine on b303 so maybe it's a bug? Anyone else experiencing this?
Click to expand...
Click to collapse
I'm not sure if it's a bug but I prefer it without the vibration....I was of the understanding that the bug was that it couldn't be turned off in lollipop so I think if anything it's fix.
Battery drain is my biggest concern... On mobile data it's appalling...can't wait to go back to lollipop

brumgav said:
I'm not sure if it's a bug but I prefer it without the vibration....I was of the understanding that the bug was that it couldn't be turned off in lollipop so I think if anything it's fix.
Battery drain is my biggest concern... On mobile data it's appalling...can't wait to go back to lollipop
Click to expand...
Click to collapse
I've checked this on my honor 7 and seems to work ok (e.g. haptic feedback for navigation buttons works) so I'm pretty sure it's not correct on mate s. I'll try factor reset and see if that cures the problem. - unless anyone else has any better ideas

So I am still on 303. will it be possible to flash the 321, then unlock the bootloader, flash custom recovery and thereafter restore an update of someone that provided a clean lollipop build via twrp?
As long as there isn't official 6.0 I would really like to get back to 5.1.1 xD
But my guess is we I still have to wait for a rollback firmware...
Sent from my OnePlus using XDA Labs

Cris7ianO said:
So I am still on 303. will it be possible to flash the 321, then unlock the bootloader, flash custom recovery and thereafter restore an update of someone that provided a clean lollipop build via twrp?
As long as there isn't official 6.0 I would really like to get back to 5.1.1 xD
But my guess is we I still have to wait for a rollback firmware...
Sent from my OnePlus using XDA Labs
Click to expand...
Click to collapse
Still no rollback works..you need to wait for official rollback update from huawei
Sent from my HUAWEI CRR-L09 using Tapatalk

Is anyone able to make an TWRP Flashable file? =/ i got an bootloop und cant flash over the Stock recovery without dialing the key =/
I need the complete Rom or i´m f**** =/

nobbysheep said:
the haptic feedback for navigation buttons has stopped working. I've checked all settings and all seems OK. This was working fine on b303 so maybe it's a bug? Anyone else experiencing this?
Click to expand...
Click to collapse
This error was also in lollipop version. try to switch it off in settings reboot and the switch on again and reboot and it should work like you want.

bgx said:
This error was also in lollipop version. try to switch it off in settings reboot and the switch on again and reboot and it should work like you want.
Click to expand...
Click to collapse
@bgx thanks for suggestion. Tried that and still no joy. I suspect it's a bug tbh. I'll try a factory reset tomorrow and see if that cures the problem. Not a massive problem but annoying as hell.

Related

[Q] i cant flash stock B136, Update fails at 50%

hey xda world,
first this is my first post ever on this forum and i cant hold myself of being amazed from how helpful and smart the people here,
my case is kinda hairy so bare with me
now lets get to the mess, so i got yesterday myself a p9 *EVA-L09C02B123/Vodafone*, unlocked its bootloader then installed twrp and root, after doing the process i tried to lock the bootloader because of the annoying message at the bootup, but i couldn't because of an error from fastboot {Root type is risk}.
i looked up the error around the interwebs and xda ofc, and somewhere i found that relocking can only be done if all the partitions are oem/stock, so i decided to get rid of the twrp and flashed back the default recovery from the SRK Tool and still couldnt relock it.
then i started to look for stock roms and couldn't find a stock for the L09C02, so i tried the dload B136 and it failed at 50%, knowing that oeminfo dictates which version the phone should get, i got the C432 one and flashed it using twrp, did factory reset and i noticed the vodafone boot logo being replaced by the default huawei, at this point the build became *EVA-L09C432B123* and tried the b136 dload and still no luck and failing at 50%.
please help ! :crying::crying::crying:
Welcome to xda
Does your phone still boot? And what is it you are trying to achieve right now? Relock your bootloader?
clouds5 said:
Welcome to xda
Does your phone still boot? And what is it you are trying to achieve right now? Relock your bootloader?
Click to expand...
Click to collapse
my phone does boot, and yes i want to relock for the reason i might want to sell it but having that boot message is kinda cringey for non power users.
also an update on the case, yesterday after posting this thread i downloaded an update zip from this post http://forum.xda-developers.com/showpost.php?p=67122856&postcount=47
then i flashed the zip using twrp and succeeded, now the version is L09C432B136 but still no luck locking the bootloader.
Possible bad download? Try downloading the whole stock rom again.
Any error messages?
colthekid said:
Possible bad download? Try downloading the whole stock rom again.
Any error messages?
Click to expand...
Click to collapse
this is not a fix to lock the bootloader as that is hardware level not software level. Use the tool DC-Unlocker or SRK Tools, look on the other threads under Huawei P9 and you will find these two options to lock the bootloader again. I have already done it on mine after de-branding and network unlocking my (what is now a....) EVA-L09C432B136
If you can boot and have the correct version, I'd say try a factory reset, download that full stock rom again and try flashing. I don't see why that shouldn't work. Unless there is something different hardware wise about those branded ones...
first must remove root via super su, then flash stock recovery then relock
I get a "root type is risk" when i relock with SRK Tool, any idea?
aliensmille said:
I get a "root type is risk" when i relock with SRK Tool, any idea?
Click to expand...
Click to collapse
same case here, also i got a question about the dload, should it be on an external sdcard or on internal
I think it works in internal and external, but havent tried!
aceclift said:
this is not a fix to lock the bootloader as that is hardware level not software level. Use the tool DC-Unlocker or SRK Tools, look on the other threads under Huawei P9 and you will find these two options to lock the bootloader again. I have already done it on mine after de-branding and network unlocking my (what is now a....) EVA-L09C432B136
Click to expand...
Click to collapse
Actually AFAIA flashing the stock rom will relock the bootloader.
ELGATOP9 said:
same case here, also i got a question about the dload, should it be on an external sdcard or on internal
Click to expand...
Click to collapse
External sdcard
i had an issue trying to update from B136 to B166 and i ****ed up everything
Only solution i found was to dload with stock rom B136 provided by PaulObrian in dev section, successfully, and guess what ? bootloader was locked again

[Solved] Any way to unlock FRP after OTA update? (P10 Lite)

Hello!
I recently rooted my new P10 Lite before version B124 was released, but then I decided to update my phone from B102 to B124 by flashing the recovery image from the Update file and then updating via OTA with the full update files.. The phone updated successfully but yesterday I used adb to boot into the bootloader in order to flash TWRP but noticed that FRP is now locked and i cannot flash TWRP without getting command not allowed error.
I also tried unlocking the bootloader (just in case it was locked for some reason) using the password i got from huawei but even that gives me an error. The enable OEM option in developer settings is greyed out since after the update and is till greyed out even after clearing cache and factory resetting the device. Now is there a way for me to unlock FRP again in order to flash TWRP? Or maybe another way to flash TWRP. Hopefully someone knows a way.
Use DC Unlocker.
I used it to unlock my bootloader on P9. Works perfectly.
They do FRP unlock and supports P10 Lite.
Costs 15 credits so 15 Euro.
dadvs1 said:
Use DC Unlocker.
I used it to unlock my bootloader on P9. Works perfectly.
They do FRP unlock and supports P10 Lite.
Costs 15 credits so 15 Euro.
Click to expand...
Click to collapse
Will do, thanks for the help!
Check that video bro...
https://youtu.be/h_uQqAHKJBg
Jonny93 said:
Will do, thanks for the help!
Click to expand...
Click to collapse
Wasted 15 credits on that and it didnt help me flash twrp like i thought it would
osa993ma said:
Check that video bro...
https://youtu.be/h_uQqAHKJBg
Click to expand...
Click to collapse
Thanks bro. Wish i saw it before spending 15 credits in DC unlocker. Even after removing frp i am still not able to tick enable OEM unlock in developer settimgs or flash twrp in fastboot. Only thing on my mind right now is to lock bootloader and see if enable oem unlock option will be available after that.

Please heelp frp lock

I accedentally switched OEM UNLOCK and now after reboot there is an error
Custom Binary Blocked By Frp Lock
Can you please help STEP BY STEP HWO TO FIX IT ?? i dont wanna to brick not8
klisza1993 said:
I accedentally switched OEM UNLOCK and now after reboot there is an error
Custom Binary Blocked By Frp Lock
Can you please help STEP BY STEP HWO TO FIX IT ?? i dont wanna to brick not8
Click to expand...
Click to collapse
Flash stock firmware with latest Odin in download mode. That should get you back up and running. OEM toggle switch should re-appear within 7 days (unless the date change trick works for you). The OEM unlock thread has more background, and there is a sticky thread here for the date workaround.
I have flashed all again and its working. Weird for me is about thso OEM issue - ive never had one xd even after flash srock firmware i could switch oem unlock. Curious what's depends from
klisza1993 said:
I have flashed all again and its working. Weird for me is about thso OEM issue - ive never had one xd even after flash srock firmware i could switch oem unlock. Curious what's depends from
Click to expand...
Click to collapse
Usually that error happens when you are not on stock (rooted with twrp, etc.) and hit the OEM toggle...it sees you have modified your phone in an unauthorized way and puts you in 'jail'.
I toggled it by myself i didnt know that it should be always on...
OEM issue - what is the problem. I have heard that the problem os thatbon some phones therenis no such options .... curious why
klisza1993 said:
I toggled it by myself [emoji14] i didnt know that it should be always on...
OEM issue - what is the problem. I have heard that the problem os thatbon some phones therenis no such options .... curious why
Click to expand...
Click to collapse
Snapdragon bootloaders are locked so OEM unlock toggle isn't really relevant there. For Exynos there is a long thread here with lots of info. Essentially it can take 7 days to appear if you don't see it at first boot or if you end up in jail.

Bootloop after recent Android OTA Update

Hello Community,
i have a Problem after the installation of the newest android Update (OTA).
The A2 just Boot till the white AndroidOne Logo and it hangs there after a time it seems it shut down itself.
My Device:
-USB Debugging is disabled, its a new testing device.
-I cant boot in recovery mode (vol-UP+Power) just boots to the white androidOne Screen and there it hangs
- I can enter fastboot(VOL-Down+power) mode and the device is listed when i type fastboot devices in my terminal on pc
- when i fire up MiFlash tool it list my device after clicking refresh, if i want flash the latest FW (http://en.miui.com/download-353.html) i get the error:
error:"Flash bluetooth_a error"
- My bootloader is locked.
Question:
How can I flash a offical Android with a locked bootloader?
is it a good idea? or better send it back for a warranty solution (i dont want wait)
is there another way to solve my problem? i really dont know whats the problem is. i did not rooted the device or anything.
would be lovely if someone could help me. with an instruction what i can try.
Thank you very much and have a nice day
Regards
If you have enabled 'OEM Unlock' setting in Developer settings, you will probably be good, you can unlock bootloader(oem/flashing/critical) and flash the official ROM ( as per now, 10.0.2.0 )
If not, you have 2 options
-Boot into EDL using short points and flash from there
-Warranty
Same thing happened to a friend's phone, it wasn't touched and just went brick after 10.0.2.0 OTA.
Guess everyone should enable 'OEM Unlock' in case this happens(Data Encrypted anyway, worst case stolen phone better than the chance of brick every time an OTA comes)
edit: If you want to save your data, you obviously shouldn't try the bootloader unlock way...EDL flashing allows flashing without wiping data, but haven't tested that personally
wow really? that are bad news...
thank you anyway :crying:
maybe someone other got a idea?
regards
Lot of users faced this after today's update including myself. Since my bootloader is locked, only option left is EDL flashing by connecting motherboard test points.
Just an advice for everyone reading this message from a Xiaomi Android One device: ALWAYS KEEP UR BOOTLOADER UNLOCKED, IT DOESNT MATTER IF USB DEBUG ISNT ACTIVE, JUST UNLOCK BOOTLOADER
sorry for caps, is just an important thing, i also had the issue but with unlocked bootloader i solved it easily
Just flash using fastboot
Sent from my LG-V930 using Tapatalk
Abrilabr said:
Just an advice for everyone reading this message from a Xiaomi Android One device: ALWAYS KEEP UR BOOTLOADER UNLOCKED, IT DOESNT MATTER IF USB DEBUG ISNT ACTIVE, JUST UNLOCK BOOTLOADER
sorry for caps, is just an important thing, i also had the issue but with unlocked bootloader i solved it easily
Click to expand...
Click to collapse
Yea, but if you want use it as enterprise Device the open Bootloader is a problem.
ilyas111 said:
Just flash using fastboot
Sent from my LG-V930 using Tapatalk
Click to expand...
Click to collapse
that seems not possible with a locked Bootloader (very new phone)
or can you provide a working solution with a locked bootloader? i wont use this EDL thing because its just new and i dont want open it.
Thank you all anyways
Try with this tool : https://forum.xda-developers.com/mi-a2/development/tool-mi-a2-xtrem-toolkit-t3879660
(edl included)
Same trouble here, we are fu...ed!
With Xiaomi mi flash tool, you can re active bootloader protection !
Simple flash with this tool with the option "clean and lock critical"
Works for me !
xotob said:
With Xiaomi mi flash tool, you can re active bootloader protection !
Simple flash with this tool with the option "clean and lock critical"
Works for me !
Click to expand...
Click to collapse
you had bootloader unlocked, i dont, i cant flash nothing with bootloader locked and i have unchecked the option in debug menù.
Reptant said:
If you have enabled 'OEM Unlock' setting in Developer settings, you will probably be good, you can unlock bootloader(oem/flashing/critical) and flash the official ROM ( as per now, 10.0.2.0 )
If not, you have 2 options
-Boot into EDL using short points and flash from there
-Warranty
Same thing happened to a friend's phone, it wasn't touched and just went brick after 10.0.2.0 OTA.
Guess everyone should enable 'OEM Unlock' in case this happens(Data Encrypted anyway, worst case stolen phone better than the chance of brick every time an OTA comes)
edit: If you want to save your data, you obviously shouldn't try the bootloader unlock way...EDL flashing allows flashing without wiping data, but haven't tested that personally
Click to expand...
Click to collapse
After got OTA update to 10.0.3.0 and Today i try to unlock bootloader but I can't unlock_critical and I can't flashing unlock
boonc said:
After got OTA update to 10.0.3.0 and Today i try to unlock bootloader but I can't unlock_critical and I can't flashing unlock
Click to expand...
Click to collapse
Same problem here, does anyone have a solution?
Does fastboot mode is detected in pc?
Sent from my MI 6X using Tapatalk
ilyas111 said:
Does fastboot mode is detected in pc?
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
yes, but i cant use more of fastboot comands, cause bootloader is locked, cant use "flashing unlock/unlock_critical"
Cizzle4 said:
you had bootloader unlocked, i dont, i cant flash nothing with bootloader locked and i have unchecked the option in debug menù.
Click to expand...
Click to collapse
I'm in your same situation
Exactly the same situation here... Waiting for a solution without losing warranty.
I think if your bootloader is not unlocked, the only possible solution left is to shorting the test points on motherboard. Those who have warranty can return the unit for claim. Yet another mess up from Xiaomi and this will be my last phone from them.
UnlimitedBB said:
I think if your bootloader is not unlocked, the only possible solution left is to shorting the test points on motherboard. Those who have warranty can return the unit for claim. Yet another mess up from Xiaomi and this will be my last phone from them.
Click to expand...
Click to collapse
I can understand that. I will claim warranty because its new and i dont want do that test point thing.
on private i would buy and recommend xiaomi anyways but if you want these hardware for some enterprise things then better not.
Iam out of this Thread now but if you want talk here some more feel free.. maybe somebody can bring a solution for all you guys who face this problem but i think its not possible without a open BL or the TestPoint Method.
Regards and have a nice day
Hi. I'm with locked bootloader. I received new January update. No change - stock variant updated to Pie. So it's safe to update or waiting for new one? Mi A2 4/64 micron ram

Relock bootloader VOG-L29

Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed
goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?
maurydes said:
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed
Click to expand...
Click to collapse
My lord he doesn't know BL Code and desperately trying to lock it.:laugh:
tassos_chry said:
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?
Click to expand...
Click to collapse
Hi did you tried above methods? What's the result? If not try TWRP tool which I've suggested you.
Another guide for you follow this link CLICK HERE.
I personally advise don't lock bootloader, if you don't know code ask your seller for it.
Thanks,
goldybewon
Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)
Hi guys,
Sorry for this stupid question but how do you check your bootloader status on this device?
fastboot oem relock command need oem bootloader code.
you can try with full ota upgrade via OTG via Dload metod. long press the volume up key + volume down key + power button.
Choose the right firmware ,same country of your PHone (example europe C432).
But you are very lucky to have an P30 pro unlocked...don't relock.....
look here
https://androidhost.ru/search.html
torytory said:
Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)
Click to expand...
Click to collapse
tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
lets exchange phones i'll give you a locked one gimme your unlocked one friend
so, how can you do relock if you do not have the code? I have the same problem...

Categories

Resources