Hi,
when i was trying to install a new ROM (CM13) to my phone (xiaomi mi3). when i connected it to the computer my computer said i need to format the disk before using. After i did so, when i sideloaded the ROM i told me i was missing partitions to flash this ROM. Does anyone know how to deal with this?
Thanks for any help
Put it in fastboot mode and MiFlash factory image.
Download MIUI ROM Flashing Tool and Xiaomi Mi 3 CDMA/WCDMA Lastest Global Developer Version Fastboot File Download:
http://en.miui.com/a-234.html
Then install TWRP and CM13.
Related
Wipe everything
Install global developer zip file
When reboot, twrp says no OS installed
Help pls
if the recovery method of flashing the full rom fails, then you have no other recourse except to flash via fastboot method.
take note of this "Please wipe all data in Recovery mode if you want to update to a discontinuous ROM version, or downgrade to an older ROM version using MIUI full ROM pack. If you upgrade from MIUI Stable ROM based on Android M to MIUI Developer ROM based on Android N, please flash it via Fastboot update. Recovery update might cause upgrade failure."
http://en.miui.com/a-232.html
http://en.miui.com/a-234.html
lucasho2312 said:
Wipe everything
Install global developer zip file
When reboot, twrp says no OS installed
Help pls
Click to expand...
Click to collapse
Did you just tried rebooting to system after flashing? I also got that error "no OS installed" in TWRP so many times, but rebooting to system with no problems at all.
nnth said:
Did you just tried rebooting to system after flashing? I also got that error "no OS installed" in TWRP so many times, but rebooting to system with no problems at all.
Click to expand...
Click to collapse
Unmounted system before flashing ROM .
in my opinion why just not use rom from xioami.eu because you have custom recovery .
p.chandra284 said:
Unmounted system before flashing ROM .
Click to expand...
Click to collapse
Dont unmount system flash zip and after flash use hardware buttons to reeboot
U need to format data before installing miui
lucasho2312 said:
Wipe everything
Install global developer zip file
When reboot, twrp says no OS installed
Help pls
Click to expand...
Click to collapse
The reason is, that you can't flash OFFICIAL Chinese (Developer/Stadle) Rom with cusom recovery (TWRP). But you can flash anything esle. Like Lineage OS. If you want to use MIUI Rom, you have to flast a Xiaomi.eu ( developer or stable) rom. NOT OFFICIIAL CHINESE !!! If you prefer Official Chinese Global rom, you must download a FASTBOOT rom (not recovery) , and flash it in fastboot mode, with MiFlash.
instead of beating around the bush, why not follow the official procedure of flashing an official miui rom
if you are coming from a custom rom, as specified herein?:
http://en.miui.com/a-234.html
When can we expect official RR for mi max 2?
It was already available for redmi note 4 which is having the same processor.
You have to wait for custom Rom until miui release the kernel source which is must have to develop a custom one. please be patience...
If you flash rom with out error, Even no os installed warning, you can boot into system without problem.
hi friend i have xiaomi redmi 4x i have unlocked bootloader OK
I have install twrp 3110 OK
when i install this xiaomi.eu rom latest beta everything is OK
when i want install back latest stable global 9.110 by xiaomi i download normal recovery rom from xiaomi site and put it on phone storage then i normal go twrp wipe (factory reset) install 9110 install is ok
when i click reboot system i see on boot only mi logo and no this .... powered by android
also same when i choose in twrp wife all data system etc expect storage where is this downloaded rom.
could any explain me why it stuck at boot if installation via twrp is ok ?
but when i install back this xiaomi.eu rom boot works OK
tubabuyukustun said:
hi friend ....
could any explain me why it stuck at boot if installation via twrp is ok ?
Click to expand...
Click to collapse
Hello, this happens because official MIUI boot.img verifies if recovery.img is also official/original.
You have 2 options to resolve the boot problem:
1. If you want to keep TWRP then modify boot.img... http://en.miui.com/thread-249666-1-1.html (with R4X image of course)
and flash it from TWRP or fastboot: fastboot flash boot boot.img
2. If you want original recovery, get "recovery.img" from the exact TGZ image as your MIUI ZIP
and flash it: fastboot flash recovery recovery.img
:good:
hello: this maybe a newbie question, but how do you flash back to the factory rom in case I bork the custom rom install? With factory recovery of course.
I imagine there must be an official way to flash back the rom, but I downloaded a PC suite tool from miui.com, and it wouldn't read my CC9 when connected. Weird.
I also found online that there's a chinese version and a global version of the CC9 official MIUI rom. What's the global version? Was it meant for Mi9 Lite?
Thanks for any input.
If you unlocked bootloader ,then you can flash old ROMs. Otherwise you can't.
I unlocked it. But i dont know what the official method/software is for flashing back to factory spec. I now have twrp and xiaomi.eu and just want to know how to get back to factory rom and recovery. Tks
Download mi flash tool or flash tool pro.
Now install them and driver also.
Download mi cc 9 latest fastoot rom
Unzipped the rom.
Now open mi flash tool and load the unzipped folder
Turn off your device and press power + volume down for bootloader.
Now connect via usb cable.
Click on flah botton and wait until 100% complete.
Your device will be on after successfully flashed
hi guys
i just bought a brand new mi 8 se with a unlocked bootloader ! it was running android 8.1 and i installed miui_MI8SE_V11.0.2.0.QEBCNXM_3363abf171_10.0 on it with a old twrp (i think 3.2) because the newest twrp just refused to boot . after installing that rom recovery or the OS won't boot so i installed the newest twrp and both android and twrp 3.5.0 booted no problem !
buy that rom is a china version and it's BS ....
i downloaded miui 11 from xiaomi.eu and attempted installing it ! i did the following :
enabled usb debugging and reboot to fastboot mode and installed twrp 3.5.0 and booted in twrp
then i used advance wipe option and wiped everything but internal storage
so i installed the rom and wiped data with writing yes and rebooted the phone but it shows the fastboot mode and i can't boot into android or twrp ....
so i have to use miflash to install the stock rom and repeat the process and follow every guide i could find one by one but still i'll stuck in fastboot
HELP ME PLS .....
i just want to install the miui 11 or 12 eu on this phone but it doesn't work
btw fastboot command didn't work at the start on my pc so i found a batch file for AMD and after using that fastboot on pc started working just fine
I found a solution to it ! just follow this guy ! he's my hero
[Fix] Fastboot stuck on MI 8 SE, While flashing EU Rom
Follow these steps: •Flash MIUI China Dev 8.12.13 fastboot rom •After booting system, flash TWRP 1102 from ADB •Flash EU beta 8.12.27 on TWRP 1102 • Wipe data •Flash TWRP 1227 from the TWRP 1102 • Reboot TWRP from the TWRP boot menu •Then...
forum.xda-developers.com
Hi guys, i just flashed (with a light wipe) the last rom for my Xiaomi Mi 11 Ultra (obtained on the update section of parameters) and i first lost all my config.
So, i decided to restore the backup i made just before flashing and here is the drama, it boot directly into TWRP and i can't seem to find my storage anymore (tried file manager)
TWRP also tells me that no OS is installed, please help, i'm desperate
I think the first step is to recover access to internal sdcard, and maybe then i can restore a backup
Thank you !
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
hassanaliyeh said:
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
Click to expand...
Click to collapse
Ok, will try this tomorrow, thank you !
Is it this one : https://www.xiaomiflash.com/ ?
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
hassanaliyeh said:
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
Click to expand...
Click to collapse
Thank you very much, sir !
Will try this and post the result, maybe with a little tuto if it's not already everywhere ^^
So, tried 5 times and not once a good result, the better i can obtain is 12.5.7.0 global working, flashed with xiaomitool. TWRP ok, and i will try Magisk next.
Every other tries solded by an sdcard/os/data loss T_T
That's a mystery. I ran on 12.5.17.0 all fine before this incident and i cannot get it work anymore :/
I obtained rom from https://androidfilehost.com/?w=files&flid=321331
TWRP from https://androidfilehost.com/?fid=14943124697586336381
Also tried this method again (this was my first method and it worked like a charm till this 12.5.20.0... )
[ROM][MIUI][star/mars] Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra
How to install Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra We will release fastboot ROM versions until TWRP for star/mars is released TWRP RELEASED Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on...
forum.xda-developers.com
The problem with global is it seems to be greatly outdated (patch from 2021.09, that's a huge security risk to be months backward nowadays, let aside bug correction, new functionnality, etc)
I can't seem to find a more recent global version (updater within settings tells me there's no more up to date version).
Do someone have an idea, please ? :/
What i'm doing :
1. put device on fastboot mode
2. launch xiaomitool and flash 12.5.7.0 global rom
3. reboot into fastboot
4. launch xiaomi unlock and unlock device
5. boot TWRP with fastboot boot twrp.img in cmd (command returned all ok)
6. into "soft" TWRP, One Key Inject TWRP
7. into "hard" TWRP > install and give it the .zip rom file
8. after the rom installed, all broken again :/
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
gammelobst said:
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
Click to expand...
Click to collapse
Thanks for that ! ^^
That sure seem a simple task
You're telling me that i can, from my 12.5.7.0 global, patch the boot.img (90mb) from the 12.5.20.0 eu with magisk, flash this with fastboot and that it will work ?
Seems too wonderfull to be true XD
EDIT:
My bad, you said "optionnally", not "alternatively"
So, i'm stuck here, i don't know and can't seem to find the fastboot cmd to install the xiaomi eu rom in .zip format
Do you know it please ?
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Sathelp said:
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Click to expand...
Click to collapse
Hi Sathelp !
An ultra big thank you !! The flash worked wonderfuly it seems
That's awesome how simple it is, in fact, and to say that i lost hours and hours without being able to approach this, i'm so noob :/
much kudos :x
I'm now on the way to root and finally, can reuse my mi11 ^^