Hello guys i archived all dgadelha rom's (without mokee os) and i created dgadelha cm12.1 (28.03 version) flashable zip .
This zip is compatible with twrp 2.x.x.x and 3.x.x.x recovery's
Thanks for very good cm12.1 rom @dgadelha
How to flash it:
Step 1:
You should download files for flashing:
Flashable zip with Cm12.1 rom (Cm12.1-20160328-Flashable-Zip-By-Arda-Sen.zip): http://bit.ly/1qlknsJ
ADB v1.0.32: http://bit.ly/23Aw8dk
Recovery [Personal choice] :
Twrp 2.x.x.x : http://bit.ly/1VjtaIH
Twrp 3.x.x.x : http://bit.ly/1SvFHlV
Step 2:
1) Unpack archive with ADB and put TWRP image there.
2) Copy file with rom to internal/external memory of your phone.
3) Then you should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB folder and hold Shift + Right Mouse button and write this command:
Code:
Recovery flash codes
For Twrp 2.x.x.x :
Code:
fastboot flash recovery new-zen5-reco.img
For Twrp 3.x.x.x :
Code:
fastboot flash recovery cm-13.0-20160410-UNOFFICIAL-T00F-recoverytwrp-3.0.M2-0.img
Then you should reboot your phone in the recovery mode. (turn off you gadget then press Turn off button and volume - button)
Step 3:
Then you phone will reboot in the recovery. In the recovery you should install package with rom.
Step 4:
After flashing, you should format (not wipe) data and cache in the TWRP.
Then you should reboot to system.
Enjoy.
Thanks @dgadelha
Main Thread : http://bit.ly/1N60Dnd
Does this work on zenfone 6?
Sent from my ASUS_T00F using XDA-Developers mobile app
tej12345 said:
Does this work on zenfone 6?
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah its work but sensors is dead
Try this (its builded my friend): http://forum.xda-developers.com/android/development/zenfone-6-cm12-1-t3352609
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
tank0412 said:
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
Click to expand...
Click to collapse
Nope its not a modification !
Im just created flashable zip !
tank0412 said:
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
Click to expand...
Click to collapse
And he is deleted this rule on cm12.1/cm13 thread
format?instead of wipe data? which recovery is the most stable?
emirfahimi said:
format?instead of wipe data? which recovery is the most stable?
Click to expand...
Click to collapse
My opinion is 2.x.x.x
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
rafoca said:
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
Click to expand...
Click to collapse
This is rom more stable in my opinion. Worth having a few tweaks, but it's not the fault of the developer.
MrPhodovisck said:
This is rom more stable in my opinion. Worth having a few tweaks, but it's not the fault of the developer.
Click to expand...
Click to collapse
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
rafoca said:
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
Click to expand...
Click to collapse
Yes, I think so.
rafoca said:
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
Click to expand...
Click to collapse
Yup , its most stable cm rom
rafoca said:
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
Click to expand...
Click to collapse
CyanoZenMod is based soo old source's probably knone or quan cm12.1 rom based but this rom is more stable ,liquid ,battery backup
The WiFi does not connect the Bluetooth does not work
reboot first or flash gapps first?
I did all the right steps: reboot in recovery, flash rom, flash gapps, format data and cache, reboot system.
Wi-fi wont work at all when the rom loads
rafoca said:
I did all the right steps: reboot in recovery, flash rom, flash gapps, format data and cache, reboot system.
Wi-fi wont work at all when the rom loads
Click to expand...
Click to collapse
Take a logcat with adb and send me
Code:
adb logcat > logcat.txt
TechGenius said:
Take a logcat with adb and send me
Code:
adb logcat > logcat.txt
Click to expand...
Click to collapse
I can't. I uninstalled the rom after trying multiple solutions for the Wi-Fi issue =/
rafoca said:
I can't. I uninstalled the rom after trying multiple solutions for the Wi-Fi issue =/
Click to expand...
Click to collapse
No problem and
*Spoiler*
I builded new cm12.1 rom and now testing this without any problem
*1 April Security Patch
*Lastest Sources
Related
DO NOT INSTALL THIS IF YOU HAVE UPGRADED TO THE LOLLIPOP BUILD. FOR 32 BIT RECOVERY ONLY.
YU Yureka Official Cyanogen OS Odexed & De-Odexed
This is the official untouched YU Yureka ROM zip which can be installed from custom recoveries say CWM, TWRP, Philz etc…
Installing ROM from recovery is simpler than installing firmware from fastboot (but if you soft-bricked your phone, flashing firmware may save it yeah but don't flash kk fastboot images in lolliopop fastboot as itl hard brick the device).
Odexed vs De-Odexed?
Odexed firmware is faster and more secure, but a deodexed one gives more modification to freedom, and is the only way possible to change the look and feel of system apks (theming). In actual terms, deodexed ROMs are only slower in the first ever boot, after which they are the same speed as the former ones. Also, deodex doesn’t entail any serious security risks to your device either, and you can be rest assured that the millions of users opting for these aren’t suffering (including me).
Downloads:
Odexed ROM: (DEFAULT)
Yureka_Original_ROM_Odexed
MD5: 7D3BF824F4A0D28DD578084F132DDFD8
De-Odexed ROM:
Yureka_Original_ROM_De-Odexed
It has few Force Close's. I recommend Odexed ROM.
MD5: AE73E1D0C6353E65CD9FBDB103E8631D
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
SOURCE:
Device
Kernel
DISCLAIMER: I'm not held responsible if somehow something bad happens to your device. I've tested the ROM in my YUREKA/AO5510/tomato and it works.
XDA:DevDB Information
Yureka Official ROM Odexed & De-Odexed, ROM for the YU Yureka
Contributors
Shivam Kumar Jha
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery say CWM, TWRP, Philz etc.
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Odexed
Stable Release Date: 2015-02-28
Created 2015-02-28
Last Updated 2015-02-28
Screenshots:
Reserved
bro how to flash this properly....
i mean step by step
Good work...
The play store keeps crashing no matter what
sharan565 said:
bro how to flash this properly....
i mean step by step
Click to expand...
Click to collapse
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
there select the ROM you downloaded odexed/ deodexed..
Iqbal641 said:
Good work...
Click to expand...
Click to collapse
sohny said:
The play store keeps crashing no matter what
Click to expand...
Click to collapse
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
A weird question
Will i get official OTA after installing this?? as this is stock...
sharan565 said:
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
The updater-script has a command to mount and then format system..
so doing just factory reset is totally fine...
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
Yes you will..
just make sure the update recovery while OTA is enabled in developer options (by default it is)..
or manually install the stock recovery
Click to expand...
Click to collapse
Shivam Kumar Jha said:
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Click to expand...
Click to collapse
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
sohny said:
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
Click to expand...
Click to collapse
Doesnt matter wont work
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Is this modified?
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
sohny said:
Doesnt matter wont work
Click to expand...
Click to collapse
try flashing CM11 gapps..
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
AndroTech said:
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Click to expand...
Click to collapse
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
nikhilchandhra said:
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
Click to expand...
Click to collapse
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Headset Bug
Shivam Kumar Jha said:
try flashing CM11 gapps..
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
[OPTIONAL]To re-lock your boot loader:
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Click to expand...
Click to collapse
The headset bug which some times irritates me to the peaks, the audio routing isnt perfect in stock, i.e even after connecting a headset the sound comes from the speaker and it can be only solved by restarting the mobile. Even though it detects the headset, when i remove the headset the audio will be still routed to headset, i.e no sound from speaker. Again a restart is needed to solve this problem. Is this problem solved? and no headset icon on connecting a headset, any way i use a third party app for that. Is this issue solved in this rom? Do say it.
---------- Post added at 11:56 AM ---------- Previous post was at 11:36 AM ----------
Could some one give me the link of the gapps for odexed rom? Thanq
sanjeev7 said:
Will i get official OTA after installing this??...
Click to expand...
Click to collapse
Shivam Kumar Jha said:
.....Your device is now ready to receive OTA updates!....
Click to expand...
Click to collapse
even if we're running stock de-odexed rom? or do we have to get back on odexed rom?
Shivam Kumar Jha said:
....I''l prepare a custom one using the deodexed ROM as base...
Click to expand...
Click to collapse
please do. and, try and keep it as slim as possible.
i'm sure there are folks who don't use much of g00gle stuff anyway.
problem in deodexed rom
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
problems in de-odexed
gokuss1234 said:
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
Click to expand...
Click to collapse
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
dalvi.nishant9 said:
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
Click to expand...
Click to collapse
yeah i checked as it wasnt deodexed properly..
cant help this one now as im lollipop now .. cant revert back to x32 kitkat..
y dont u guyz update to lollipop as well?? make d most of ur hardware with x64 lollipop
** BRICK WARNING/Disclaimer/Requirements **
>> Only flash with unlocked bootloader <<
>> Scripts are released under GPlv2 license <<
>> Run at own risk <<
Hi,
I patched the TWRP 3.0 recovery from faust93 to include important partitions
that make switching between different versions of Android/Ubuntu very simple.
All partitions are properly added to the fstab, but out of fear that some of
you will brick your device i disabled most of them.
Next version will contain a backup of all unique partitions, but i will have
to test this thoroughly.
Steps to install:
1. Download the zip file from attachments below
2. Unpack the zip file
3. Check checksum with md5sum -c *.md5
4. Put phone into fastboot mode (boot device with [vol-] and [power] button)
5. Flash recovery with:
# fastboot flash recovery TWRP_3.0_m86_patched_st0rm77.img
# fastboot reboot
then boot the device with [vol+] and [power] button, to enter recovery
[Requested by @p82maarj]
Already on an older TWRP version ?
- Flash "update_TWRP_3.0_m86_patched_st0rm77.zip" from TWRP
or
- Unpack the zip and flash the recovery manually in TWRP by selecting "install image"
Enjoy
Warning:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Hi @st0rm77
Thanks for your contrubution!
It will be good if you create a flashable zip of your new recovery. It can be flashed directly from the stock recovery or from the other twrp recovery without entering in fastboot.
Furthermore to have a flashable zip is usefull to flash a new rom update. For updating the new rom version I enter in TWRP, flash rom zip, flash unlocked bootloader zip and flash TWRP zip.
I attach the other flashable TWRP zip you can based on (only replace recovery.img by your recovery.img).
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
PYCON said:
Personally I like android as OS, I don't wish to try Ubuntu, in my case it's useful to update my "old" TWRP by Faust93 with this one ?
Click to expand...
Click to collapse
Yeah, you get some extra abilities:
- Backup of Boot Logo
- Backup of Device Tree
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Thanks for everything you've been releasing, great work!
st0rm77 said:
Hi @p82maarj,
Thanks, as per your request, i added an update_TWRP_3.0_m86_patched_st0rm77.zip . This is directly flashable from an older TWRP.
I added some extra verification so people dont end up with a corrupt recovery.
Enjoy
(in order not to confuse people to much, can you remove your download)
Click to expand...
Click to collapse
Done Thanks!
st0rm77 said:
** If you flash an official update.zip from Flyme, remove bootloader, ldfw & recovery from ZIP**
** Otherwise you'll find yourself with a locked bootloader **
Click to expand...
Click to collapse
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
PYCON said:
Another little question... What's the difference from 2 ZIP files ? Older one and updated ZIP ?
Click to expand...
Click to collapse
I know the answer to this one!
The first zip contains the img file that you can flash using fastboot.
The second (update) zip is the one you need if you already have (an older) TWRP and you wish to update to this version (use it from inside TWRP).
abePdIta said:
Sorry for the stupid question but it's just to be sure. I should remove the file named "bootloader" or the one named "boot.img"? Or both of them?
Thank you very much!
Click to expand...
Click to collapse
boot.img is your boot partition, you need this one :good: (NEEDED)
bootloader is the locked bootloader from meizu, avoid this one as the plague (AVOID)
Dont brick your device, check everything carefully :fingers-crossed:
st0rm77 said:
Dont brick your device, check everything carefully :fingers-crossed:
Click to expand...
Click to collapse
Thank you very much! I will be careful in the future, I promise!
i follow the a to I tutorial
then unlock bootloader
then this
now when i conect meizu to pc i try to pass custom rom to internal memory and the phone restart
what is the problem
---------- Post added at 10:35 PM ---------- Previous post was at 09:56 PM ----------
managed to download the rom in phone browser now i have RR and all it´s ok
I flash stock recovery ( use update 5.1.10.0g) but not success, hÃc hÃc, help me restore stock recovery, many thanks!!!!
st0rm77 said:
Now you can backup/restore in TWRP without manually flashing dtb (device tree) in order to switch between Flyme, AICP, ResurrectionRemix or Ubuntu.
Click to expand...
Click to collapse
Just to be sure I understood :
Going from Flyme to CM :
-Backup Flyme (system+data+dtd)
-Flash CM archive
Going back to Flyme
-(optional) Backup CM (system+data+dtd)
-Restore Flyme (system+data+dtd)
Is there is a quikier way ?
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
help
hi .i change meizu pro 5 from china to national (5.6.1.19 daily )and unlock it and flash recover TWRP 3.0 but not login it the recovery .
i want updated
PYCON said:
TWRP 3.1.0.0 is out... It's possible to port it for our PRO5 ?! :silly:
Click to expand...
Click to collapse
I too vote for a port!
3.1.1 was released
munky-head said:
3.1.1 was released
Click to expand...
Click to collapse
Not for PRO5
This is an update of stable oxygen os 4.1 based on 7.1.1
Here are some highlights:
Upgraded Android 7.1.1
Updated Google security patch to 1st March 2017
Added expanded screenshots
Improved picture taking of moving objects with blur reduction
Improved video stability when recording
Improved WiFi connectivity
Improved bluetooth connectivity
General bug fixes
Downloads:
OP3T:
https://mega.nz/#!nhsVyJQR!2kegOJbHAVh-CmcelNkoKicQ_Mq16dcYlbkyUOKOGtw
https://drive.google.com/file/d/0B0pr-ZA5b-1pYUZoTHZNSi0xYmM/view
OP3:
https://mega.nz/#!CUVmkICS!oOvhFwbF5icXQS60gpZNVqnpWe7UbMX9IttKtLNhwA4
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
thanks @Viren for link
Steps:
download the zip
factory reset
use twrp/official recovery or adb to install
U R DONE
Video:
https://youtu.be/E7QtX9ug1pM
Official OTA links
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:
Can I flashed this from beta 12 with TWRP?
What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Can someone extract the gallery and camera app in oos and post it. Thanks
Pritster5 said:
What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?
Click to expand...
Click to collapse
Clean flash include system wipe
HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
Boot ur phone take complete backup than go to recovery n do wipe
evertking said:
Can I flashed this from beta 12 with TWRP?
Click to expand...
Click to collapse
Yes u cn do dirty flash
ashokmor007 said:
Boot ur phone take complete backup than go to recovery n do wipe
Click to expand...
Click to collapse
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.
HatRiGt said:
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.
Click to expand...
Click to collapse
Which twrp u r using?
Viren said:
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:
Click to expand...
Click to collapse
Thanks man ill do that now
ashokmor007 said:
Which twrp u r using?
Click to expand...
Click to collapse
3.0.4-1
HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
What version of TWRP that you are using? Mine is 3.0.4.1 and i have no issue on the encryption error. Try to flash the latest TWRP version to see if that can bypass the error message or not.
Google Drive link for OP3. anyone? Thank you.
I have also decrypted memory. How to upgrade to the new version without encrypting memory again (and loosing everything)?
HatRiGt said:
3.0.4-1
Click to expand...
Click to collapse
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..
null0seven said:
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..
Click to expand...
Click to collapse
Flashed stock recovery n also tried twrp recovery.. Nothing bypassed the encryption. Asked for password. Finally decided to wipe the internal storage.
Lost all my personal data n pics :crying:
Video installation guide? I may not want to have TWRP problems..
Just one simple question: Why are you all staying at 3.0.4-1, when official 3.1.0.0 is out, able to get the job done without any problem? Just asking.
Is there a guide to root & install TWRP for the model G610Y? As well as any compatible Roms & Xposed as well...
UPDATED:
I found a method to add custom recovery, root and add xposed with success on android 6.0 on POST #4. If anyone knows of custom roms please share...
all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:
lionelandres said:
all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:
Click to expand...
Click to collapse
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
I used this method to install CWM Recovery & Root with success:
https://forum.xda-developers.com/android/general/root-samsung-galaxy-j7-prime-cwm-t3516777
This is the Xposed (custom-build-by-wanam) I used for this device as well:
Flashed this zip using ADB side load method on CWM: https://androidfilehost.com/?fid=24591000424962808
Use the Installer I attached.
I ALSO INCLUDED ALL THE XPOSED FILES AS WELL
Here is the uninstaller just in case:
https://androidfilehost.com/?fid=24499762635998273
insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
I tried that method... Could not mount internal or sd card to flash...
insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
insane209 said:
I tried that method... Could not mount internal or sd card to flash...
Click to expand...
Click to collapse
Use OTG to flash. There's still a bug on TWRP.
lionelandres said:
Use OTG to flash. There's still a bug on TWRP.
Click to expand...
Click to collapse
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?
insane209 said:
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?
Click to expand...
Click to collapse
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
Will give it a go! Thank u good sir! ??
Nvm I Got it
https://forum.xda-developers.com/ga.../request-to-solve-twrp-sd-card-mount-t3734050
insane209 said:
Can I flash a rom using CWM adb side load as well?
Click to expand...
Click to collapse
only use ADB side load or TWRP.:good:
lionelandres said:
only use ADB side load or TWRP.:good:
Click to expand...
Click to collapse
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?
insane209 said:
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?
Click to expand...
Click to collapse
not sure about CWM though, most ROM were built for TWRP install method. I always use TWRP and it has Aroma :good:
TUTORIAL
lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!
JMags777 said:
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!
Click to expand...
Click to collapse
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done
insane209 said:
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done
Click to expand...
Click to collapse
Thank you so much for the tip sir. I already flashed my phone with XenOs1.1 and it is running well so far. ??
lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
What ROM do you think is the most stable?
any of you guys tried the LineageOS 15.1?
Xenos rom pro
Code:
*** Disclaimer ***
All flashing is done at your own risk!
While nothing from this thread should break your device,
don't come back here blaming anyone if it does!
Introduction
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and
customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to
mash. The GUI is also fully XML driven and completely theme-able. You can change just about
every aspect of the look and
Click to expand...
Click to collapse
Prerequisites:
Code:
. Unlocked Bootloader
Installation instructions:
Recovery Install Method:
Simply download the TWRP-3.5.1_10-0 from twrp website and flash it using fastboot mode, steps are mentioned below
Fastboot Install Method:
You will need the platform-tools from the Android SDK on your computer. Download only the platform-tools according to your device to get adb and fastboot binaries.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type
Code:
adb reboot bootloader
You should now be in fastboot mode.
Download the zip file attached to this thread and copy the recovery.img file into the same folder as your adb and fastboot binaries and type:
Code:
fastboot flash recovery recovery.img
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Device Changelog
Version:3.5.1-10-0:
Initial Official Release
Click to expand...
Click to collapse
Version: 3.5.1_10-0-2:
Upstreamed to 3.5.1_10.0
Fixed issue related to fs of ext_media
Fixed issue related to format data
Click to expand...
Click to collapse
Version: 3.5.0_10-0-1:
Fixed Android 11 loop errors
Click to expand...
Click to collapse
Version: 3.5.0_10-0:
Initial Stable version
Fastbootd Mode Working Fine
Adb sideload Working Fine
A11 decryption working Fine
Nandroid Backup and Restore Working(not tested on miui)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads
Official TWRP Website
My Telegram TWRP Support Group:
Poco X2 | Recoveries
Recovery Support For Poco X2 Rules: 1. Dont spam 2. Be polite and help others 3. No Purn spam 4. English is recommended
t.me
Credits:
Huge thanks to @Captain_Throwback for his guidences
Sources
TWRP: https://github.com/TeamWin/android_bootable_recovery
Device Tree: https://github.com/TeamWin/android_device_xiaomi_phoenix
Kernel Tree: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/phoenix-q-oss
Status: Stable
TWRP: 3.5.1_10
Nice. Hope it go official soon
Has anybody tried this? Time zone settings, display time out setting, none of the settings are saving. It goes back to default after reboot. I installed the zip via older version of TWRP. I tried installing via Fastboot but it stuck on splash screen.
after formatting data and rebooting to recovery, copying files to device does not work. Internal storage does not show up. i have to reboot to system again to get copy to device working and get internal storage to show up again. this is a bug with every other twrp out there except the LR team one. Hope you fix this bug.
LEGACY710 said:
after formatting data and rebooting to recovery, copying files to device does not work. Internal storage does not show up. i have to reboot to system again to get copy to device working and get internal storage to show up again. this is a bug with every other twrp out there except the LR team one. Hope you fix this bug.
Click to expand...
Click to collapse
I have shared a new test build for that
Join the support group to test it
Hey, glad to see someone working on X2 TWRP again.
Normal versioning would be like 3.5.0_10-1 (then 3.5.0_10-2, etc.) not 3.5.0_10.0.1, by the way, but otherwise looking good over here!
osm0sis said:
Hey, glad to see someone working on X2 TWRP again.
Normal versioning would be like 3.5.0_10-1 (then 3.5.0_10-2, etc.) not 3.5.0_10.0.1, by the way, but otherwise looking good over here!
Click to expand...
Click to collapse
10.0.1 is just the incremental version by my side
HimanshuRaj said:
10.0.1 is just the incremental version by my side
Click to expand...
Click to collapse
Yeah normally the device-side increment is just the -1 or -2, etc. No worries though.
osm0sis said:
Yeah normally the device-side increment is just the -1 or -2, etc. No worries though.
Click to expand...
Click to collapse
Thankyou sir for telling me that, i wasn't knowing it,
Himanshu,
Does this twrp support android 11 rom flashing? And will it allow us to flash any phoenix roms on phoenixin phone?
Please make it official
AIDROOS said:
Himanshu,
Does this twrp support android 11 rom flashing? And will it allow us to flash any phoenix roms on phoenixin phone?
Click to expand...
Click to collapse
It supports android 11, only miui based on a11 is not supported yet
Yeh u can flash phoenix and phoenixin both
404fac said:
Please make it official
Click to expand...
Click to collapse
I don't know till how long i can maintain it, so i am not going for official,
And did official or unofficial matter ?
HimanshuRaj said:
I don't know till how long i can maintain it, so i am not going for official,
And did official or unofficial matter ?
Click to expand...
Click to collapse
For me it doesn't matter . . .
Installed it on Android 11..Internel storage shows 0
Mukit222 said:
Installed it on Android 11..Internel storage shows 0
Click to expand...
Click to collapse
Cuz it didn't support miui a11 rn
Hi, I have a poco x2(miui 12.1.2) and I'm looking to flash a custom rom. Can I use this safely? I'm new to all of this and I'd like to avoid bricking my phone by accident, If not, would you mind suggesting an alternative?
Mukit222 said:
Installed it on Android 11..Internel storage shows 0
Click to expand...
Click to collapse
Cuz of keymaster 4.1, it isn't supported by twrp as of now, but the team is working....
HimanshuRaj said:
Cuz of keymaster 4.1, it isn't supported by twrp as of now, but the team is working....
Click to expand...
Click to collapse
Eagerly Waiting ))
E:Unable to decrypt FBe device
help pls
I bought this phone in China,I think it is someting different from yours