DO NOT INSTALL THIS IF YOU HAVE UPGRADED TO THE LOLLIPOP BUILD. FOR 32 BIT RECOVERY ONLY.
YU Yureka Official Cyanogen OS Odexed & De-Odexed
This is the official untouched YU Yureka ROM zip which can be installed from custom recoveries say CWM, TWRP, Philz etc…
Installing ROM from recovery is simpler than installing firmware from fastboot (but if you soft-bricked your phone, flashing firmware may save it yeah but don't flash kk fastboot images in lolliopop fastboot as itl hard brick the device).
Odexed vs De-Odexed?
Odexed firmware is faster and more secure, but a deodexed one gives more modification to freedom, and is the only way possible to change the look and feel of system apks (theming). In actual terms, deodexed ROMs are only slower in the first ever boot, after which they are the same speed as the former ones. Also, deodex doesn’t entail any serious security risks to your device either, and you can be rest assured that the millions of users opting for these aren’t suffering (including me).
Downloads:
Odexed ROM: (DEFAULT)
Yureka_Original_ROM_Odexed
MD5: 7D3BF824F4A0D28DD578084F132DDFD8
De-Odexed ROM:
Yureka_Original_ROM_De-Odexed
It has few Force Close's. I recommend Odexed ROM.
MD5: AE73E1D0C6353E65CD9FBDB103E8631D
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
SOURCE:
Device
Kernel
DISCLAIMER: I'm not held responsible if somehow something bad happens to your device. I've tested the ROM in my YUREKA/AO5510/tomato and it works.
XDA:DevDB Information
Yureka Official ROM Odexed & De-Odexed, ROM for the YU Yureka
Contributors
Shivam Kumar Jha
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery say CWM, TWRP, Philz etc.
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Odexed
Stable Release Date: 2015-02-28
Created 2015-02-28
Last Updated 2015-02-28
Screenshots:
Reserved
bro how to flash this properly....
i mean step by step
Good work...
The play store keeps crashing no matter what
sharan565 said:
bro how to flash this properly....
i mean step by step
Click to expand...
Click to collapse
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
there select the ROM you downloaded odexed/ deodexed..
Iqbal641 said:
Good work...
Click to expand...
Click to collapse
sohny said:
The play store keeps crashing no matter what
Click to expand...
Click to collapse
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
A weird question
Will i get official OTA after installing this?? as this is stock...
sharan565 said:
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
The updater-script has a command to mount and then format system..
so doing just factory reset is totally fine...
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
Yes you will..
just make sure the update recovery while OTA is enabled in developer options (by default it is)..
or manually install the stock recovery
Click to expand...
Click to collapse
Shivam Kumar Jha said:
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Click to expand...
Click to collapse
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
sohny said:
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
Click to expand...
Click to collapse
Doesnt matter wont work
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Is this modified?
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
sohny said:
Doesnt matter wont work
Click to expand...
Click to collapse
try flashing CM11 gapps..
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
AndroTech said:
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Click to expand...
Click to collapse
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
nikhilchandhra said:
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
Click to expand...
Click to collapse
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Headset Bug
Shivam Kumar Jha said:
try flashing CM11 gapps..
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
[OPTIONAL]To re-lock your boot loader:
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Click to expand...
Click to collapse
The headset bug which some times irritates me to the peaks, the audio routing isnt perfect in stock, i.e even after connecting a headset the sound comes from the speaker and it can be only solved by restarting the mobile. Even though it detects the headset, when i remove the headset the audio will be still routed to headset, i.e no sound from speaker. Again a restart is needed to solve this problem. Is this problem solved? and no headset icon on connecting a headset, any way i use a third party app for that. Is this issue solved in this rom? Do say it.
---------- Post added at 11:56 AM ---------- Previous post was at 11:36 AM ----------
Could some one give me the link of the gapps for odexed rom? Thanq
sanjeev7 said:
Will i get official OTA after installing this??...
Click to expand...
Click to collapse
Shivam Kumar Jha said:
.....Your device is now ready to receive OTA updates!....
Click to expand...
Click to collapse
even if we're running stock de-odexed rom? or do we have to get back on odexed rom?
Shivam Kumar Jha said:
....I''l prepare a custom one using the deodexed ROM as base...
Click to expand...
Click to collapse
please do. and, try and keep it as slim as possible.
i'm sure there are folks who don't use much of g00gle stuff anyway.
problem in deodexed rom
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
problems in de-odexed
gokuss1234 said:
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
Click to expand...
Click to collapse
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
dalvi.nishant9 said:
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
Click to expand...
Click to collapse
yeah i checked as it wasnt deodexed properly..
cant help this one now as im lollipop now .. cant revert back to x32 kitkat..
y dont u guyz update to lollipop as well?? make d most of ur hardware with x64 lollipop
Related
Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)
SMARTY BOY said:
Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)
Click to expand...
Click to collapse
Will this work with Micromax Canvas A1 also ??
iremofaisal said:
Will this work with Micromax Canvas A1 also ??
Click to expand...
Click to collapse
Its posted in the android one group so I think it should work with an android one phone.
What do you think?
akhilnarang said:
Its posted in the android one group so I think it should work with an android one phone.
What do you think?
Click to expand...
Click to collapse
is it working with canvas a1 ?
srikantrn said:
is it working with canvas a1 ?
Click to expand...
Click to collapse
Yes
Sent from my A1 using XDA Free mobile app
After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1
ashesshubham said:
After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1
Click to expand...
Click to collapse
Had you created a backup with custom recovery?
Yes
ashesshubham said:
Yes
Click to expand...
Click to collapse
Ok. Which custom recovery did you use to create the backup?
Just boot into recovery and restore from the backup you created .
But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that
ashesshubham said:
But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that
Click to expand...
Click to collapse
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.
Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone
ashesshubham said:
Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone
Click to expand...
Click to collapse
No. But you will be able to download the OTA updates but it will not be installed on your phone.
Installing OTA updates require Stock Recovery.
You need to unlock your bootloader and then flash the stock recovery for your phone.
So how i install stock recovery bro pls tell
ashesshubham said:
So how i install stock recovery bro pls tell
Click to expand...
Click to collapse
Alright. I will upload the required tools and stock recovery by tomorrow evening.
Yes bro do that a great help bro pls upload bro and jusy post a rply a great help bro
How did you flash custom recovery with locked bootloader???
Sent from my A1 using XDA Free mobile app
Follow the instructions below.
1) Backup all your important data
2) Download the zip file from the attachment and extract it into a folder of your choice
3) Enable USB Debugging on your phone and connect it to your PC via USB cable
4) Open the folder where you extracted the downloaded attachment
5) Run "Unlock Bootloader.bat" file. Follow the on-screen instructions. This will unlock your bootloader and will factory reset your phone. Your phone will now reboot automatically.
6) Go to Settings >> About Phone >> Tap on Build Number 10 times >> Go back to Settings >> Developer Mode >> Allow USB Debugging . A pop-up message will appear on your screen asking you to confirm USB Debugging from your PC. Tap on Allow.
7) Now, connect your phone again by enabling USB Debugging mode.
8) Run "Recovery Installer.bat" from the extracted folder. Now, your phone has stock recovery (for Micromax Canvas A1). Your phone will now reboot automatically.
9) Again, Run "Lock Bootloader.bat" file from the extracted folder. This will relock your bootloader.
---------------------
Now, your bootloader is locked and you have stock recovery in your phone. You can confirm this by booting your phone into recovery.
Now, you'll be able to install the OTA Updates.
DONE!
Moreover the official image file here: Android One Stock Recovery.img (KitKat) can be used to flash the stock recovery from fastboot mode or using flashify app in rooted phone.
nope that dosent work
iremofaisal said:
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.
Click to expand...
Click to collapse
been there done that that but it can't install
Hello guys i archived all dgadelha rom's (without mokee os) and i created dgadelha cm12.1 (28.03 version) flashable zip .
This zip is compatible with twrp 2.x.x.x and 3.x.x.x recovery's
Thanks for very good cm12.1 rom @dgadelha
How to flash it:
Step 1:
You should download files for flashing:
Flashable zip with Cm12.1 rom (Cm12.1-20160328-Flashable-Zip-By-Arda-Sen.zip): http://bit.ly/1qlknsJ
ADB v1.0.32: http://bit.ly/23Aw8dk
Recovery [Personal choice] :
Twrp 2.x.x.x : http://bit.ly/1VjtaIH
Twrp 3.x.x.x : http://bit.ly/1SvFHlV
Step 2:
1) Unpack archive with ADB and put TWRP image there.
2) Copy file with rom to internal/external memory of your phone.
3) Then you should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB folder and hold Shift + Right Mouse button and write this command:
Code:
Recovery flash codes
For Twrp 2.x.x.x :
Code:
fastboot flash recovery new-zen5-reco.img
For Twrp 3.x.x.x :
Code:
fastboot flash recovery cm-13.0-20160410-UNOFFICIAL-T00F-recoverytwrp-3.0.M2-0.img
Then you should reboot your phone in the recovery mode. (turn off you gadget then press Turn off button and volume - button)
Step 3:
Then you phone will reboot in the recovery. In the recovery you should install package with rom.
Step 4:
After flashing, you should format (not wipe) data and cache in the TWRP.
Then you should reboot to system.
Enjoy.
Thanks @dgadelha
Main Thread : http://bit.ly/1N60Dnd
Does this work on zenfone 6?
Sent from my ASUS_T00F using XDA-Developers mobile app
tej12345 said:
Does this work on zenfone 6?
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah its work but sensors is dead
Try this (its builded my friend): http://forum.xda-developers.com/android/development/zenfone-6-cm12-1-t3352609
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
tank0412 said:
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
Click to expand...
Click to collapse
Nope its not a modification !
Im just created flashable zip !
tank0412 said:
It is a rom modification.
dgadelha wrote that rom modification is denied.
And you violated this rule!
Click to expand...
Click to collapse
And he is deleted this rule on cm12.1/cm13 thread
format?instead of wipe data? which recovery is the most stable?
emirfahimi said:
format?instead of wipe data? which recovery is the most stable?
Click to expand...
Click to collapse
My opinion is 2.x.x.x
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
rafoca said:
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
Click to expand...
Click to collapse
This is rom more stable in my opinion. Worth having a few tweaks, but it's not the fault of the developer.
MrPhodovisck said:
This is rom more stable in my opinion. Worth having a few tweaks, but it's not the fault of the developer.
Click to expand...
Click to collapse
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
rafoca said:
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
Click to expand...
Click to collapse
Yes, I think so.
rafoca said:
Thanks! Is it stable and ready for daily use?
The original thread says experimental.
Thanks!
Click to expand...
Click to collapse
Yup , its most stable cm rom
rafoca said:
Thanks!
Is this rom the same as this one, but with its latest version?
http://forum.xda-developers.com/zenfone-5/development/rom-cyanozenmod-12-1-t3299201
Click to expand...
Click to collapse
CyanoZenMod is based soo old source's probably knone or quan cm12.1 rom based but this rom is more stable ,liquid ,battery backup
The WiFi does not connect the Bluetooth does not work
reboot first or flash gapps first?
I did all the right steps: reboot in recovery, flash rom, flash gapps, format data and cache, reboot system.
Wi-fi wont work at all when the rom loads
rafoca said:
I did all the right steps: reboot in recovery, flash rom, flash gapps, format data and cache, reboot system.
Wi-fi wont work at all when the rom loads
Click to expand...
Click to collapse
Take a logcat with adb and send me
Code:
adb logcat > logcat.txt
TechGenius said:
Take a logcat with adb and send me
Code:
adb logcat > logcat.txt
Click to expand...
Click to collapse
I can't. I uninstalled the rom after trying multiple solutions for the Wi-Fi issue =/
rafoca said:
I can't. I uninstalled the rom after trying multiple solutions for the Wi-Fi issue =/
Click to expand...
Click to collapse
No problem and
*Spoiler*
I builded new cm12.1 rom and now testing this without any problem
*1 April Security Patch
*Lastest Sources
This is an update of stable oxygen os 4.1 based on 7.1.1
Here are some highlights:
Upgraded Android 7.1.1
Updated Google security patch to 1st March 2017
Added expanded screenshots
Improved picture taking of moving objects with blur reduction
Improved video stability when recording
Improved WiFi connectivity
Improved bluetooth connectivity
General bug fixes
Downloads:
OP3T:
https://mega.nz/#!nhsVyJQR!2kegOJbHAVh-CmcelNkoKicQ_Mq16dcYlbkyUOKOGtw
https://drive.google.com/file/d/0B0pr-ZA5b-1pYUZoTHZNSi0xYmM/view
OP3:
https://mega.nz/#!CUVmkICS!oOvhFwbF5icXQS60gpZNVqnpWe7UbMX9IttKtLNhwA4
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
thanks @Viren for link
Steps:
download the zip
factory reset
use twrp/official recovery or adb to install
U R DONE
Video:
https://youtu.be/E7QtX9ug1pM
Official OTA links
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:
Can I flashed this from beta 12 with TWRP?
What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Can someone extract the gallery and camera app in oos and post it. Thanks
Pritster5 said:
What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?
Click to expand...
Click to collapse
Clean flash include system wipe
HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
Boot ur phone take complete backup than go to recovery n do wipe
evertking said:
Can I flashed this from beta 12 with TWRP?
Click to expand...
Click to collapse
Yes u cn do dirty flash
ashokmor007 said:
Boot ur phone take complete backup than go to recovery n do wipe
Click to expand...
Click to collapse
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.
HatRiGt said:
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.
Click to expand...
Click to collapse
Which twrp u r using?
Viren said:
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:
Click to expand...
Click to collapse
Thanks man ill do that now
ashokmor007 said:
Which twrp u r using?
Click to expand...
Click to collapse
3.0.4-1
HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
What version of TWRP that you are using? Mine is 3.0.4.1 and i have no issue on the encryption error. Try to flash the latest TWRP version to see if that can bypass the error message or not.
Google Drive link for OP3. anyone? Thank you.
I have also decrypted memory. How to upgrade to the new version without encrypting memory again (and loosing everything)?
HatRiGt said:
3.0.4-1
Click to expand...
Click to collapse
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..
null0seven said:
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..
Click to expand...
Click to collapse
Flashed stock recovery n also tried twrp recovery.. Nothing bypassed the encryption. Asked for password. Finally decided to wipe the internal storage.
Lost all my personal data n pics :crying:
Video installation guide? I may not want to have TWRP problems..
Just one simple question: Why are you all staying at 3.0.4-1, when official 3.1.0.0 is out, able to get the job done without any problem? Just asking.
Is there a guide to root & install TWRP for the model G610Y? As well as any compatible Roms & Xposed as well...
UPDATED:
I found a method to add custom recovery, root and add xposed with success on android 6.0 on POST #4. If anyone knows of custom roms please share...
all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:
lionelandres said:
all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:
Click to expand...
Click to collapse
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
I used this method to install CWM Recovery & Root with success:
https://forum.xda-developers.com/android/general/root-samsung-galaxy-j7-prime-cwm-t3516777
This is the Xposed (custom-build-by-wanam) I used for this device as well:
Flashed this zip using ADB side load method on CWM: https://androidfilehost.com/?fid=24591000424962808
Use the Installer I attached.
I ALSO INCLUDED ALL THE XPOSED FILES AS WELL
Here is the uninstaller just in case:
https://androidfilehost.com/?fid=24499762635998273
insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
I tried that method... Could not mount internal or sd card to flash...
insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
insane209 said:
I tried that method... Could not mount internal or sd card to flash...
Click to expand...
Click to collapse
Use OTG to flash. There's still a bug on TWRP.
lionelandres said:
Use OTG to flash. There's still a bug on TWRP.
Click to expand...
Click to collapse
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?
insane209 said:
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?
Click to expand...
Click to collapse
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
Will give it a go! Thank u good sir! ??
Nvm I Got it
https://forum.xda-developers.com/ga.../request-to-solve-twrp-sd-card-mount-t3734050
insane209 said:
Can I flash a rom using CWM adb side load as well?
Click to expand...
Click to collapse
only use ADB side load or TWRP.:good:
lionelandres said:
only use ADB side load or TWRP.:good:
Click to expand...
Click to collapse
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?
insane209 said:
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?
Click to expand...
Click to collapse
not sure about CWM though, most ROM were built for TWRP install method. I always use TWRP and it has Aroma :good:
TUTORIAL
lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!
JMags777 said:
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!
Click to expand...
Click to collapse
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done
insane209 said:
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done
Click to expand...
Click to collapse
Thank you so much for the tip sir. I already flashed my phone with XenOs1.1 and it is running well so far. ??
lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
What ROM do you think is the most stable?
any of you guys tried the LineageOS 15.1?
Xenos rom pro
Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.
To ROOT the ROM
Flash Magisk from TWRP and you will have root access
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.
Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do
Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app
AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269
Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST
Do these zips format internal storage or not ??
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.
aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.
aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.