My screen stuck in "Unlocked Booloader.." and reset again and again, (this happended after i'm root it). I've tried many ways to fix it, include: http://forum.xda-developers.com/showthread.php?t=2218273. but have nothing..
The problem is that my computer doesn't reconigse my mobile. I can't go to "Recovery screen" by holding both "Power button and vol -" or ues file .bat. It still warning" device not found" and reset my phone despite of my drivers are fully installed
Sorry you guys because of my English, its not very well..
I'm very appreciated if any one find the way to fix it for me, i'm very confused now . Is it will be bricked forever ??. My moto xt890 is only 3 days old
Are you sure you booted it up correctly? Try holding down power and vol - until it vibrates. As soon as you feel it release power and hold vol - only. You have to be really quick though. Then you should be able to go to fastboot and reflash a new system image.
You can use this tutorial for more instructions: http://forum.xda-developers.com/showthread.php?t=2157162
Gesendet von meinem XT890 mit Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=2218273
Try asking the OP in this thread, he might be able to help
Hello thanks for reading!
I have a ascend p7, wich i once rooted but then i got my P8.
Now i want to sell the P7 and i decided to factory reset the P7, then things got messy.
if i turn on the phone i get a message that the boot failed, i can press the volume down key to get into rescue mode, or hold the power button to shut down
Its the l10 model and i am from the netherlands. downloaded some roms but can't install those through SD card.
Hope someone can help me out!
Thanks
you need to boot into bootloader mode..
then you have to flash the right boot.img and recovery.img of the original rom you want to install..
after that put the update.app (of the rom you want - it must be a full rom!!) onto a sdcard inside folder named "dload"..
perform a force update by pressing power and both volume +&- together until the recovery appears..
the phone should install the rom and after that automatically reboot into OS..
all steps are written thousand times inside the p7 forum..
pls search for the steps if you don't know how to proceed..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
blueIBI said:
you need to boot into bootloader mode..
then you have to flash the right boot.img and recovery.img of the original rom you want to install..
after that put the update.app (of the rom you want - it must be a full rom!!) onto a sdcard inside folder named "dload"..
perform a force update by pressing power and both volume +&- together until the recovery appears..
the phone should install the rom and after that automatically reboot into OS..
all steps are written thousand times inside the p7 forum..
pls search for the steps if you don't know how to proceed..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
Click to expand...
Click to collapse
Thanks for replying! I will try !
HI! I flashed by P9 AL00 with stock Rom. It was running on fRomFuture NewWorld 4.1. First I unrooted my phone. Flashed it with stock rom by SRK Tool. Put the update file in dload folder of the sdcard. Switched the phone off. Pressed all 3 buttons together. It started uploading. Once it got completed, it never turned on. I have tried all the ways to turn it on. Pressed Power button fore more than 30 mins, pressed Vol Up + Power, Vol Down + Power, All 3 buttons together, but nothing helped. Its just not switching on. Please Help.
Maybe it's not charged.
UPDATE:
adb is not recognising the device while fastboot does. This is my only hope now. Can I somehow retrieve my phone back by fastboot?
usmaggu said:
UPDATE:
adb is not recognising the device while fastboot does. This is my only hope now. Can I somehow retrieve my phone back by fastboot?
Click to expand...
Click to collapse
HiSuite cant halp you ? there is recovery option in it, try that first!
Tried it, it says "Your device is not supported for system recovery." In supporting devices it's showing only EVA-L09 and EVA-L019, whereas mine is EVA-L00
Arnys said:
HiSuite cant halp you ? there is recovery option in it, try that first!
Click to expand...
Click to collapse
Tried it, it says "Your device is not supported for system recovery." In supporting devices it's showing only EVA-L09 and EVA-L019, whereas mine is EVA-L00
maybe in this post can find solution http://forum.xda-developers.com/p9/how-to/hard-brick-l-19-t3507768
Hello,
after a couple of attempts at installing TWRP recovery, some successful, some not, a ROM reinstall and finally this last factory reset, my Huawei P9 phone is stuck at what appears to be boot or restart loop. It is interesting however that I am unable to turn off the phone at all and it's been like this for an hour. At first, TWRP recovery wouldn't boot but the OS would. Then I did factory reset and phone restarted. Since then it won't boot or turn off. When I hold the power button to turn it off, it vibrates once, then vibrates again and then Huawei logo is displayed. After that a message that says "Your device has been unlocked and can't be trusted." & "Your device is booting now..." which is normal since I unlocked my phone bootloader, but the problem is that it is just stuck there.
It stays there forever, screen on, phone on, can't restart because it comes back to the same point, can't turn it off since battery is impossible to take out... Any hope? I bought the phone a couple of days ago and this is really bad... Help!
Edit: In case someone else stumbles upon similar situation - after trying everything possible with these 3 buttons I had available (vol+- and power), I have managed to boot by (I THINK) holding the power button for 10 secs but releasing it really fast after the screen turns off and BEFORE the first vibration happens.
Edit 2: Now I have the same problem again and I can't seem to get the right button "combo" to pass the booting phase like I did some hour ago... Any ideas?
Edit 3: It appears that the ROM I have flashed caused problems with TWRP - after I got an SD card, managed to put stock ROM (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) on it and then did force upgrade, the phone booted successfully.
Step by step:
1) Drained battery to 0% and forced phone to turn off (otherwise it would vibrate twice and get stuck loading TWRP if I tried to turn it off using power button)
2) When I plugged it in and it got some battery power it started, avoided TWRP and regularly booted the OS (which was causing problems with TWRP in my case I think). If you don't have any OS, do not recharge or turn on your phone until you have prepared and put SD card into the phone
3) Downloaded and extracted the dload folder from the P9 stock ROM archive (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) to root directory of SD card
4) Unplugged and turned off the phone using OS Shutdown option
5) Turned it on by holding power, volup and voldown buttons together - "Your device has been unlocked and can't be trusted. Your device is booting now..." message appeared so I thought it was stuck again and was about to hang myself, but then the OS upgrade started (if it doesn't work right away, try restarting the phone with power, volup and voldown buttons held together again)
6) Upgrade was successful but the phone wouldn't boot without complete factory reset, after which it booted normally. Bootloader was relocked, then I updated to the latest stable EMUI (4.1.1) and life returned to normal.
BUMP
I can access Fastboot&Rescue mode and use abd (but phone is not rooted). Other than that I can't get to repeat what I did when I managed to boot the phone previous time this happened some hours ago... Can anyone post all volume+- and power key combinations which I can try?
Any other ideas more than welcome...
Guys can someone help with this. I'm having the same sort of issues. I have flashed an update and now I have lost touch on the screen. I can't even use twrp because the touch is not working.
Please can someone advise.
Sent from my SM-G928F using Tapatalk
Vernicht said:
BUMP
I can access Fastboot&Rescue mode and use abd (but phone is not rooted). Other than that I can't get to repeat what I did when I managed to boot the phone previous time this happened some hours ago... Can anyone post all volume+- and power key combinations which I can try?
Any other ideas more than welcome...
Click to expand...
Click to collapse
After getting an SD card (everything I did so far was using internal storage) and putting stock Huawei P9 ROM on it (Android 6 and EMUI 4), then shutting down (forced by draining battery) and doing force upgrade (vol+ and vol- held after power up) I have managed to (upgrade and) boot my phone and get it back to normal again. If anyone needs more detailed explanation on how I solved this, feel free to ask.
Open bootloader again, i had the same problem few days ago
Yes please vernicht. My touchscreen has stopped responding after flashing an update.app using DC Phoenix.
I really need to get the phone back to normal.
Thanks in advance
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
Yes please vernicht. My touchscreen has stopped responding after flashing an update.app using DC Phoenix.
I really need to get the phone back to normal.
Thanks in advance
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Can you boot into OS? Please provide more exact details.
How I got out of the TWRP(?) boot loop: I couldn't take out the battery, but I have managed to drain it to 0% by letting the phone stay on for hours thus eventually shutting itself down. After that I have charged it and then powered it up. It didn't attempt to boot TWRP (no loop) but instead booted back the OS. After that I could regularly restart the phone and do all operations without getting stuck in loop, which allowed me to issue force upgrade command using hardware power up/down buttons.
Nope. I manage to flash it with DC Phoenix fully but it just keeps boot looping and going back to the Huawei logo. Then after that if goes into its recovery menu and the only my to use the menus is with the volume keys.
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
Nope. I manage to flash it with DC Phoenix fully but it just keeps boot looping and going back to the Huawei logo. Then after that if goes into its recovery menu and the only my to use the menus is with the volume keys.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Are you able to put files on your SD card? If yes, you can try putting stock ROM on it and then force force upgrading (hold vol+ and vol- together after power up). It should overwrite everything and boot up.
I have done this but it won't even force flash the stock rom. It gets to 5% and says 'system error'
I followed your suggestion to let the battery drain and then I charged it fully, but when charging it got to 1% and rebooted the phone into eRecovery.
I wish I could get this phone fixed and back to normal.
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
I have done this but it won't even force flash the stock rom. It gets to 5% and says 'system error'
I followed your suggestion to let the battery drain and then I charged it fully, but when charging it got to 1% and rebooted the phone into eRecovery.
I wish I could get this phone fixed and back to normal.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Did you use this stock ROM for P9 (if it's EVA-L09 like mine) or something else?
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
It worked fine with force upgrade for me, while some other ROMs didn't.
Do you have Wipe cache and data/factory reset options available in eRecovery, did you try that?
I'll try that. The only problem I have is my touchscreen won't respond under eRecovery. I have to use the volume and power key to navigate. Any idea what's happened there?
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
I'll try that. The only problem I have is my touchscreen won't respond under eRecovery. I have to use the volume and power key to navigate. Any idea what's happened there?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
It will probably return to function after you restore to stock ROM. Until then you can use power button to select items in eRecovery if needed.
Btw I have edited my original first post in this thread with step by step guide on what I did in my case.
Thank you Vernicht for all your help.
I finally manage to get the phone fully working again. I also managed to get it changed from C900 to C432, lock the bootloader and join the beta.
Thank you so much again. It's very much appreciated.
Merry Christmas too
Sent from my SM-G928F using Tapatalk
Hi nscxp2005
how did you manage that?
i have the same Problem.
i have done a "Wipe Cache" and a factory reset.
i have copied the "update.app" from PauloBrien zip on a sd card in a folder named dload.
then i have done a Force flash -> it goes to 5% an says Invalid File.
when i look in the device with DC Phoenix it says it is a EVA-L09C900B136
Why have i done that?
My wive have the EVA-L09C432B136 and i updatet it OTA to Nougat.
i thought i could switch to that version to get the new Nougat but something went wrong......
thanks in advance and sry for my english =)
trx850 said:
Hi nscxp2005
how did you manage that?
i have the same Problem.
i have done a "Wipe Cache" and a factory reset.
i have copied the "update.app" from PauloBrien zip on a sd card in a folder named dload.
then i have done a Force flash -> it goes to 5% an says Invalid File.
when i look in the device with DC Phoenix it says it is a EVA-L09C900B136
Why have i done that?
My wive have the EVA-L09C432B136 and i updatet it OTA to Nougat.
i thought i could switch to that version to get the new Nougat but something went wrong......
thanks in advance and sry for my english =)
Click to expand...
Click to collapse
Did you manage to fix this issue??
---------- Post added at 10:55 PM ---------- Previous post was at 10:52 PM ----------
Hi Guys, hope you can help
I have got an P9 EVA-L09 which I tried to update to B378 but failed and now it stuck in a boot loop and won't recover using the phone.
I have tried to download the update mentioned above and doing a forced recovery on the phone Power + VOL+ + VOL- but no luck, gets 5% and fails.
Would like some help please.
Hello, I have the same problem, I tried to install Lineage 14.1 and it didn't work. Then i tried to go back to EMUI 5.0 and i just all fell apart. No i have no android on my P9 (cos i wiped all data and the system through TWRP 3.1.1.1), and now my touchscreen doesn't work. When i try to force install, it blockes on 5%. Anyone have any idea on how to fix it? Thanks
weineckcobra said:
Hello, I have the same problem, I tried to install Lineage 14.1 and it didn't work. Then i tried to go back to EMUI 5.0 and i just all fell apart. No i have no android on my P9 (cos i wiped all data and the system through TWRP 3.1.1.1), and now my touchscreen doesn't work. When i try to force install, it blockes on 5%. Anyone have any idea on how to fix it? Thanks
Click to expand...
Click to collapse
Inatall System via Srk Tool
Bricked my P9 while trying to remove branding.
Vernicht said:
Hello,
after a couple of attempts at installing TWRP recovery, some successful, some not, a ROM reinstall and finally this last factory reset, my Huawei P9 phone is stuck at what appears to be boot or restart loop. It is interesting however that I am unable to turn off the phone at all and it's been like this for an hour. At first, TWRP recovery wouldn't boot but the OS would. Then I did factory reset and phone restarted. Since then it won't boot or turn off. When I hold the power button to turn it off, it vibrates once, then vibrates again and then Huawei logo is displayed. After that a message that says "Your device has been unlocked and can't be trusted." & "Your device is booting now..." which is normal since I unlocked my phone bootloader, but the problem is that it is just stuck there.
It stays there forever, screen on, phone on, can't restart because it comes back to the same point, can't turn it off since battery is impossible to take out... Any hope? I bought the phone a couple of days ago and this is really bad... Help!
Edit: In case someone else stumbles upon similar situation - after trying everything possible with these 3 buttons I had available (vol+- and power), I have managed to boot by (I THINK) holding the power button for 10 secs but releasing it really fast after the screen turns off and BEFORE the first vibration happens.
Edit 2: Now I have the same problem again and I can't seem to get the right button "combo" to pass the booting phase like I did some hour ago... Any ideas?
Edit 3: It appears that the ROM I have flashed caused problems with TWRP - after I got an SD card, managed to put stock ROM (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) on it and then did force upgrade, the phone booted successfully.
Step by step:
1) Drained battery to 0% and forced phone to turn off (otherwise it would vibrate twice and get stuck loading TWRP if I tried to turn it off using power button)
2) When I plugged it in and it got some battery power it started, avoided TWRP and regularly booted the OS (which was causing problems with TWRP in my case I think). If you don't have any OS, do not recharge or turn on your phone until you have prepared and put SD card into the phone
3) Downloaded and extracted the dload folder from the P9 stock ROM archive (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) to root directory of SD card
4) Unplugged and turned off the phone using OS Shutdown option
5) Turned it on by holding power, volup and voldown buttons together - "Your device has been unlocked and can't be trusted. Your device is booting now..." message appeared so I thought it was stuck again and was about to hang myself, but then the OS upgrade started (if it doesn't work right away, try restarting the phone with power, volup and voldown buttons held together again)
6) Upgrade was successful but the phone wouldn't boot without complete factory reset, after which it booted normally. Bootloader was relocked, then I updated to the latest stable EMUI (4.1.1) and life returned to normal.
Click to expand...
Click to collapse
I have the same issue after flashing the rollback package from the official huawei site. The phone isn't rooted, it just had a branding for some odd reason. So I installed the C432B182 but somehow ended up with a C900B... firmware. So I installed the Rollback package C900B300 using the 3 button method. It said successfull but ever since I've been stuck in the same loop. At the logo. Trying to enter recovery mode (Volume Up + Power) or Force flash any of the firmwares (stock C432.. or rollback C900) doesnt succeed. It wont attempt. Only vibrates as you described and turns the screen off for a second before entering the same loop again.
How did you manage to enter the flash Menu??
Thanks in advance and hope you can help.
SherifSabet said:
I have the same issue after flashing the rollback package from the official huawei site. The phone isn't rooted, it just had a branding for some odd reason. So I installed the C432B182 but somehow ended up with a C900B... firmware. So I installed the Rollback package C900B300 using the 3 button method. It said successfull but ever since I've been stuck in the same loop. At the logo. Trying to enter recovery mode (Volume Up + Power) or Force flash any of the firmwares (stock C432.. or rollback C900) doesnt succeed. It wont attempt. Only vibrates as you described and turns the screen off for a second before entering the same loop again.
How did you manage to enter the flash Menu??
Thanks in advance and hope you can help.
Click to expand...
Click to collapse
Hello!
At me too such problem. When charging to sit at 0% and plug it into the charger, it immediately turns on and goes into the system, then the screen is worth a long logo. I have a phone EVA-L09C627B150.
Help me find my full version! Or I can use this version by reference https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Sorry for my English!
Hi
I am looking for a savior
I have uninstalled (in root mode) several applications to make some free space on my honor 4X but I have probably made some mistakes
Yesterday, the issue started with a classical bootloop.
At the beginning the fasboot mode and the recovery mode was reachable with the special combos (Vol+ and Power or Vol- and Power)
To fix the problem I have launched an update by sdcard (Vol+ Vol- Power) but the status bar is still stucked to 90%
I have used an official firmware 4.4.2 with the UPDATE.app file within the dload folder in my SDCard.
But the situation is very tricky. I have no access to the fasboot or recovery mode any more.
The phone restarts itself on the update mode (no power off possible)
I have the same message : "Software Updating, Please Wait, DONOT unplug USB or press any key !"
But after two hours, the status bar doesn't move anymore (still to 90%)
Any idea to make my honor 4x survive ? :angel:
Model :: Honor 4X Che2-L11
Huawei Recovery 1.0
EMUI 3
Android 4.4.2
triolo said:
Hi
I am looking for a savior
I have uninstalled (in root mode) several applications to make some free space on my honor 4X but I have probably made some mistakes
Yesterday, the issue started with a classical bootloop.
At the beginning the fasboot mode and the recovery mode was reachable with the special combos (Vol+ and Power or Vol- and Power)
To fix the problem I have launched an update by sdcard (Vol+ Vol- Power) but the status bar is still stucked to 90%
I have used an official firmware 4.4.2 with the UPDATE.app file within the dload folder in my SDCard.
But the situation is very tricky. I have no access to the fasboot or recovery mode any more.
The phone restarts itself on the update mode (no power off possible)
I have the same message : "Software Updating, Please Wait, DONOT unplug USB or press any key !"
But after two hours, the status bar doesn't move anymore (still to 90%)
Any idea to make my honor 4x survive ? :angel:
Model :: Honor 4X Che2-L11
Huawei Recovery 1.0
EMUI 3
Android 4.4.2
Click to expand...
Click to collapse
either shut down the phone, or reinstall force update again. this time, the moment you see the 1%, immediately plug it to wall charger. you can even leave it overnight. leave it alone until you see the language selection screen. or else, fastboot mode.
Check this: https://forum.xda-developers.com/honor-4x/help/honor-4x-factory-reset-recovery-menu-t3542367/page2
Hello zzztidurvirus
First of all, my mobile does not switch off at all (reboot automatically if I press the power button)
I will try to wait until the battery is 0% and try your option. I will tell you
But how long the update process should normally take ? More than 1 hour ?
Hello
Yesterday evening, I have made some new tests.
I have opened the phone to disconnect the battery.
At this stage, I can access to Fasboot with USB connection (VOL DOWN + POWER)
I have used the "Huawei Multi-Tool by Team MT" from
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
During the flashing period, all the messages seems to be fine but at the end the phone restarts with the same page :
"Software Updating, Please Wait, DONOT unplug USB or press any key"
I have waited all the night to see if the status bar will go ahead 90% but nothing better after more than 6 hours.
With the flashboot reachable, do someaone has an advice to test something else ?
Thanks in advance
triolo said:
Hello zzztidurvirus
First of all, my mobile does not switch off at all (reboot automatically if I press the power button)
I will try to wait until the battery is 0% and try your option. I will tell you
But how long the update process should normally take ? More than 1 hour ?
Click to expand...
Click to collapse
max time should be no more than 1 hour.
first 15-20 min of waiting that forced update to 100%
next 15 min waiting that glowing red honor logo
next 15 min waiting the Android is updating... popup
then you can pick your language page.
---------- Post added at 04:48 PM ---------- Previous post was at 04:44 PM ----------
triolo said:
Hello
Yesterday evening, I have made some new tests.
I have opened the phone to disconnect the battery.
At this stage, I can access to Fasboot with USB connection (VOL DOWN + POWER)
I have used the "Huawei Multi-Tool by Team MT" from
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
During the flashing period, all the messages seems to be fine but at the end the phone restarts with the same page :
"Software Updating, Please Wait, DONOT unplug USB or press any key"
I have waited all the night to see if the status bar will go ahead 90% but nothing better after more than 6 hours.
With the flashboot reachable, do someaone has an advice to test something else ?
Thanks in advance
Click to expand...
Click to collapse
https://forum.xda-developers.com/hon...t3542367/page2
try this. yep its harder than this forced update trick, but it works. Ive tried it, ive bricked it multiple times, and its still alive and its my daily driver.
No harm done trying. PROCEED WITH YOUR OWN RISK.
Hello
My issue is finally solved.
The main important thing was to wait until the battery was totally down.
Indeed, I had to make a new fastboot flash (with the "Huawei Multi-Tool by Team MT")
With the unbrick menu, I have to extract the different usefil images files and it worked.
I don't understand why the first flashing test was with errors but the final one was the good one.
Thank you for your help !
Thank you
triolo said:
Hello
My issue is finally solved.
The main important thing was to wait until the battery was totally down.
Indeed, I had to make a new fastboot flash (with the "Huawei Multi-Tool by Team MT")
With the unbrick menu, I have to extract the different usefil images files and it worked.
I don't understand why the first flashing test was with errors but the final one was the good one.
Thank you for your help !
Thank you
Click to expand...
Click to collapse
Please add solved tag in thread title
can you tell us what rom or give us the step how did you unbrick your phone ? mine is che2-L22 cant unbrick