Problem while installing twrp in my samsung galaxy s advance gt i9070 - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Respected developers,
A few days ago I had installed kitkat 4.4.2 carbon rom. Then I got the news that 6.0.1 cm13 has been realesed . I watched a couple of videos on how to install it . It needed TWRP for installing it so I flashed twrp kernal.md5 using odin and I am not sure about the file name after that my device was unable to boot then I flashed the stock rom using odin . It worked . Now can I flash that file which I used before to get a twrp now ?
The .md5 file which I used was from xda.
Currently I am using rooted jelly bean 4.1.2 with a temp cwm

You can use this: http://www.androidiani.com/forum/mo...-cyanogenmod-13-di-polishvodka-s-advance.html
Download CM13.zip, install it with temp cwm, do a wipe data and reboot (if cwm ask you about root, select No).

sanathxda said:
Respected developers,
A few days ago I had installed kitkat 4.4.2 carbon rom. Then I got the news that 6.0.1 cm13 has been realesed . I watched a couple of videos on how to install it . It needed TWRP for installing it so I flashed twrp kernal.md5 using odin and I am not sure about the file name after that my device was unable to boot then I flashed the stock rom using odin . It worked . Now can I flash that file which I used before to get a twrp now ?
e .md5 file which I used was from xda.
Currently I am using rooted jelly bean 4.1.2 with a temp cwm
Click to expand...
Click to collapse
flash cocore kernel via temp cwm then you will get twrp after that follow the instructions to flash cm13 from its threat
here is cocore thread
http://forum.xda-developers.com/showthread.php?t=2140597

Cassiusss said:
You can use this: http://www.androidiani.com/forum/mo...-cyanogenmod-13-di-polishvodka-s-advance.html
Download CM13.zip, install it with temp cwm, do a wipe data and reboot (if cwm ask you about root, select No).
Click to expand...
Click to collapse
Should I be in a stock ROM or a custom to flash it!!

madkita said:
flash cocore kernel via temp cwm then you will get twrp after that follow the instructions to flash cm13 from its threat
here is cocore thread
http://forum.xda-developers.com/showthread.php?t=2140597
Click to expand...
Click to collapse
Done and worked fine tnx

sanathxda said:
Should I be in a stock ROM or a custom to flash it!!
Click to expand...
Click to collapse
Works on both.

thanks
sanathxda said:
Should I be in a stock ROM or a custom to flash it!!
Click to expand...
Click to collapse
thanks

Related

[Q] flash using cwm 6.0.4.6

hello all..after installing cm 11 kitkat 4.4.2 using cwm 6.0.4.6 i am unable to flash any thing using the recovery...every time getting same error of "installation aborted".....i can flash with the recovery only two things..1-cm 11
2-cwm 6.0.4.6
so anyone faced this problem,please tell me the solution...
Cwm 6 only for cm 11
Sent from my GT-S5830 using xda app-developers app
tell me
aurisltu said:
Cwm 6 only for cm 11
bro,please can you tell me how to change the cwm 6.0.4.6????
Click to expand...
Click to collapse
debajyoti1 said:
aurisltu said:
Cwm 6 only for cm 11
bro,please can you tell me how to change the cwm 6.0.4.6????
Click to expand...
Click to collapse
Download cwm5 zip from here and flash via recovery http://forum.xda-developers.com/showthread.php?t=
Click to expand...
Click to collapse
debajyoti1 said:
Cwm 6 only for cm 11
bro,please can you tell me how to change the cwm 6.0.4.6????
Click to expand...
Click to collapse
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I helped
aayushkhajuria2842 said:
debajyoti1 said:
Download cwm5 zip from here and flash via recovery http://forum.xda-developers.com/showthread.php?t=
Click to expand...
Click to collapse
sorry bro...but I had told already that the cwm6.0.4.6 can flash only two files.........so when ever i went to the recovery to flash any file it just says that the installation is aborted....
Click to expand...
Click to collapse
mahithm said:
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I helped
Click to expand...
Click to collapse
but bro,i have no problem with my rom...i have problem with the cwm 6.0.4.6 recovery as it cannot flash any files except two files.
debajyoti1 said:
but bro,i have no problem with my rom...i have problem with the cwm 6.0.4.6 recovery as it cannot flash any files except two files.
Click to expand...
Click to collapse
CWM6 was designed only to flash CM 11( KitKat) based roms. You won't be able to flash anything other than that using it. Your rom might be working perfectly. But in order to install CWM5 in your current state, your only option is to flash stock rom back. You can't flash CWM5 from CWM6, similarly you can't flash any other roms using CWM6 either. So do a complete back up of data using Titanium Backup, flash stock rom using odin, install root and install CWM5. You won't have any problem with non-KitKat based roms. As for the KitKat based roms, you can either make any CM 11 rom compatile with CWM 5( thanks to @brijeshep) or use CM 11 rom flashable through CWM 5 (thanks to @Salim El Yabouri).
Make CM 11 ROM Compatible with CWM 5.x ~ Cooper Device
Kitkat For All
Once installed, you can restore the data back. Hope I helped
I have the same problem before and i dowload the two recovery 5.0.x.x and 6.0.4.6 , i open the two zip and place the recovery.img of the 5.0.x.x zip into the 6.0.4.6 zip i erase the old recovery.img of 6.0.4.6 zip and i flash the 6.0.4.6 whith the recovery on my phone (6.0.4.6) , it show me the installation of a 6.0.4.6 cwm and when i reboot into recovery i had a 5.0.x.x recovery

[Q] Recovery for CM11 kitkat

Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
ANDROID-000 said:
Guys i am new here, i am looking for a recovery to flash kitkat rom. on my previews device i just only need cwm zip then flash for recovery. in there device as i read you need kernel or something before flashing cwm (im not sure sorry. ) my phone galaxy n7000 was new, i need you advice guys and can you guys give me the link for cwm for kitkat. thanks in advance.
Click to expand...
Click to collapse
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
treacherous_hawk said:
If you are on stock rom, flash philz kernel first and reboot to recovery , flash Raw kernel and reboot recovery and flash KK rom with gapps.
Click to expand...
Click to collapse
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
ANDROID-000 said:
2 kernel? Is that a permanent recovery?
Flash phils kernel using stock recovery?
Can i flash kk without rooting my phone? Can i ask for the link. Thanks for the reply:thumbup:
Click to expand...
Click to collapse
Yes permanent recovery.
Yes flash philz kernel in stock recovery. Do the factory reset and wipes in philz recovery. It will root your phone too but only till you flash another rom with or without root.
You can flash omnirom with gapps and don't flash superSU wouldn't have root.
Google for philz kernel n7000 and Raw kernel R4.
Sent from my GT-N7000 using Tapatalk
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
ANDROID-000 said:
Thanks a lot bro....:thumbup: I'll just look in development section it is there right?:what::beer:
Click to expand...
Click to collapse
I mentioned google, easiest way out.
Philz kernel: http://lmgtfy.com/?q=philz+kernel+n7000
Raw kernel: http://lmgtfy.com/?q=raw+kernel+n7000

[Q] Downgrade CWM from 6.??? to 5.???

Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
You can either flash stock rom via odin on comp and reroot, or download and install mobile odin ported to our device. And then flash the odin flashable cwm.tar file through mobile odin.
Sent from my GT-S5830 using Tapatalk 2
Downgrade
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
You cannot downgrade from android 4.x to android 2.x. That's because 4.0.4 and higher roms have a different bootloader. So don't try to flash gingerbread over kitkat, but if you tried and your phone didn't bricked let me know!!!
rapkiller91 said:
You cannot downgrade from android 4.x to android 2.x. That's because 4.0.4 and higher roms have a different bootloader. So don't try to flash gingerbread over kitkat, but if you tried and your phone didn't bricked let me know!!!
Click to expand...
Click to collapse
Bro, he meant to downgrade the recovery mod and not the android version. CWM stands for ClockWorkMod Recovery Mod. He just wants to downgrade from CWM6 to CWM5. Hope I Helped
mahithm said:
Bro, he meant to downgrade the recovery mod and not the android version. CWM stands for ClockWorkMod Recovery Mod. He just wants to downgrade from CWM6 to CWM5. Hope I Helped
Click to expand...
Click to collapse
I know well what CWM stand for and what it is. I know he was asking how to downgrade from CWM 6 to CWM 5 but he was asking also for a downgrade from KitKat to Gingerbread. I just said that it could brick the phone.
For the CWM downgrade you must:
1) reboot in recovery mode
2) install the latest PX recovery for galaxy ace
3) reboot recovery
4) install CWM5
5) reboot recovery
6) done!
Inviato dal mio K00F utilizzando Tapatalk
rapkiller91 said:
I know well what CWM stand for and what it is. I know he was asking how to downgrade from CWM 6 to CWM 5 but he was asking also for a downgrade from KitKat to Gingerbread. I just said that it could brick the phone.
For the CWM downgrade you must:
1) reboot in recovery mode
2) install the latest PX recovery for galaxy ace
3) reboot recovery
4) install CWM5
5) reboot recovery
6) done!
Inviato dal mio K00F utilizzando Tapatalk
Click to expand...
Click to collapse
Actually downgrading from KitKat to Gingerbread will not brick the phone as long as you flash it through odin. Then again flashing any Gingerbread custom rom will not brick your phone as they are made to work only on CWM5. Hence flashing Gingerbread custom rom through CWM6 will only give you errors. Its always safe to install Gingerbread stock rom using odin. Here is the link on how to install stock rom using odin along with all firmwares and drivers (check "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin/
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Also if you still want to use KitKat, then you can use the KitKat version flashable through CWM5 by @Salim El Yabouri. Here is the link,
KitKat for all
Hope I Helped
Great help thank you
hubert.3346 said:
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
Click to expand...
Click to collapse
Sorry I hadn't got back sooner but busy with six kids
Thanks for your great help this was easy to do.
Paul
csjjpm said:
Sorry I hadn't got back sooner but busy with six kids
Thanks for your great help this was easy to do.
Paul
Click to expand...
Click to collapse
Next time you can also use the following tutorial tailor-made for such problems,
[TUTORIAL] HOW TO GO BACK FROM CWM 6.x TO CWM 5.x
Hope I Helped
I think these is s5830i Section not s5830 's.
Hitesh2626 said:
I think these is s5830i Section not s5830 's.
Click to expand...
Click to collapse
Already asked FM to move this to right section :good:
i want to downgrade from CWM 6.0.3.3 to 6.0.2.8 please help
csjjpm said:
Hi
I updated CWM to 6.??? to try a KitKat ROM but I want to go back to a Gingerbread one. I don't know how to downgrade the CWM to 5. When I try and install a CWM 5 zip file via CWM it gives me lots of errors.
Is it possible to downgrade the CWM?
thanks
Paul
Click to expand...
Click to collapse
Hi There,
you can flash the CWM reecovery v5 using Odin or fastboot. If you need help flashing it do consalt me. Thanks
downgrade successful
hubert.3346 said:
There is my solution:
Go to CWM 6 recovery and install:
- downgrade to CWM 4 - link here
- reboot your phone and go to recovery and install:
- upgrade to CWM 5 - link here
- press thanks if i helped you
Click to expand...
Click to collapse
1. I proceeded as you said, to downgrade from 6.0.4.6 to 5.0.2.6.
It worked.
Thank you very much indeed.
2. Do you know if there is any 6.0.4.7 zip or 6.0.4.8 zip for s5830?
Mardon's 6.0.5.3_1
Dr.Ghobar said:
1. I proceeded as you said, to downgrade from 6.0.4.6 to 5.0.2.6.
It worked.
Thank you very much indeed.
2. Do you know if there is any 6.0.4.7 zip or 6.0.4.8 zip for s5830?
Click to expand...
Click to collapse
Well i mentioned it earlier in a post but still instead of upgrading to 6.0.4.7 mardon's new recovery has more feastures: Check this link.
But I recommend 5.0.2.6 as it can flash almost all zips without any problem whatsoever.
As written on mardon's page that 6.0.5.3_1 was ported to Ace for flashing his kk custom rom
anand44 said:
Well i mentioned it earlier in a post but still instead of upgrading to 6.0.4.7 mardon's new recovery has more feastures: Check this link.
But I recommend 5.0.2.6 as it can flash almost all zips without any problem whatsoever.
As written on mardon's page that 6.0.5.3_1 was ported to Ace for flashing his kk custom rom
Click to expand...
Click to collapse
Is there any TOUCH custom recovery for s5830 with official 2.3.5 rom?
Not fully supported
Dr.Ghobar said:
Is there any TOUCH custom recovery for s5830 with official 2.3.5 rom?
Click to expand...
Click to collapse
I think cwm 6.0.4.8/philz edition will work. @Dr.Ghobar you know it right? you did try it.
anand44 said:
I think cwm 6.0.4.8/philz edition will work. @Dr.Ghobar you know it right? you did try it.
Click to expand...
Click to collapse
Thank you.
About your remarks:
1. cwm 6.0.4.8/philz edition did not work. a) it has mount problems; b) it prevented android 2.3.5 from booting.
2. You, before editing, said recovery is independent of the rom on the phone. If this is the case, then why all cwm 6 versions are in trouble with /system on my phone? and why mardon said that won't work with stock rom?
Dr.Ghobar said:
Thank you.
About your remarks:
1. cwm 6.0.4.8/philz edition did not work. a) it has mount problems; b) it prevented android 2.3.5 from booting.
2. You, before editing, said recovery is independent of the rom on the phone. If this is the case, then why all cwm 6 versions are in trouble with /system on my phone? and why mardon said that won't work with stock rom?
Click to expand...
Click to collapse
Cwm 6 or 5 cannot mount /system /data or /cache bcoz cwm cannot handle samsung's filesystem rfs used in galaxy ace. This problem has no solution except changing to custom rom or using cfroot kernel which has ability to change fs type to ext4.also it is quite better than stock kernel. Proceed with caution. Also i think you need android 2.3.6 for cf root kernel. You can download official android 2.3.6 from sammobile.com and cf root kernel for s5830
from Google. Also do try cwm 5.0.2.6 once it can work.
And btw flashing 2.3.6 will wipe data cache root everything.
If you choose to flash 2.3.6, try cf auto root kernel. Cm roms use ext4 by default with quite better kernels.
anand44 said:
Cwm 6 or 5 cannot mount /system /data or /cache bcoz cwm cannot handle samsung's filesystem rfs used in galaxy ace. This problem has no solution except changing to custom rom or using cfroot kernel which has ability to change fs type to ext4.also it is quite better than stock kernel. Proceed with caution. Also i think you need android 2.3.6 for cf root kernel. You can download official android 2.3.6 from sammobile.com and cf root kernel for s5830
from Google. Also do try cwm 5.0.2.6 once it can work.
And btw flashing 2.3.6 will wipe data cache root everything.
If you choose to flash 2.3.6, try cf auto root kernel. Cm roms use ext4 by default with quite better kernels.
Click to expand...
Click to collapse
1. CWM 5.0.2.6 does not have any mounting problem.
2. I do not want changing to custom rom.
3. Can "cfroot kernel" be used along with my official 2.3.5 rom?
4. What caution do you mean when you say "Proceed with caution"?
5. If I install 2.3.6, then will I have "cfroot kernel" and consequently can I install CWM 6 without mounting problem?

[Q] Doubts about Recovery

Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
samnettt said:
Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
Click to expand...
Click to collapse
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
installing custome rom
Gw|n said:
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
Click to expand...
Click to collapse
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Gw|n said:
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Click to expand...
Click to collapse
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Aronuser said:
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
Click to expand...
Click to collapse
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
samnettt said:
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Click to expand...
Click to collapse
That's NANDROID backup
samnettt said:
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
Click to expand...
Click to collapse
Here I uploaded it for you
https://www.dropbox.com/s/9082qxym9ysukxc/cm11.0_golden.maclaw.20140323.zip

TWRP recovery for liquidsmooth rom 4.4.2 for galaxy s advance

I've installed liquidsmooth rom kitkat 4.4.2 on my galaxy s advance GTI9070.. I made a backup of my stock jellybean update using TWRP recovery mode. But it seems that the new rom has CWM recovery mode. I want to restore my phone to backup rom, but i can't access TWRP recovery mode.. Everytime i enter into recovery mode it shows CWM mode and it doesn't show my backup.. Plzz help..
bhaukali said:
I've installed liquidsmooth rom kitkat 4.4.2 on my galaxy s advance GTI9070.. I made a backup of my stock jellybean update using TWRP recovery mode. But it seems that the new rom has CWM recovery mode. I want to restore my phone to backup rom, but i can't access TWRP recovery mode.. Everytime i enter into recovery mode it shows CWM mode and it doesn't show my backup.. Plzz help..
Click to expand...
Click to collapse
On what ROM you was before?
If it was on 4.4 too, take its kernel, install it with Universal kernel flasher and go to recovery and restore it.
Kernel is in ROMs zip, name of it is boot.img.
shut_down said:
On what ROM you was before?
If it was on 4.4 too, take its kernel, install it with Universal kernel flasher and go to recovery and restore it.
Kernel is in ROMs zip, name of it is boot.img.
Click to expand...
Click to collapse
No, i was not on v4.4. I was on stock jellybean update.
bhaukali said:
No, i was not on v4.4. I was on stock jellybean update.
Click to expand...
Click to collapse
Then best way is to flash stock JB with Odin, install CoCore with TWRP and do nandroid restore.
shut_down said:
Then best way is to flash stock JB with Odin, install CoCore with TWRP and do nandroid restore.
Click to expand...
Click to collapse
isn't there any other way without downloading stock JB.. Is there any way i can get get a kernel with TWRP for kitkat 4.4.2 for my phone?
bhaukali said:
isn't there any other way without downloading stock JB.. Is there any way i can get get a kernel with TWRP for kitkat 4.4.2 for my phone?
Click to expand...
Click to collapse
I was lazy to give you full answer there.
First on 4.4. our developers repartitioned preload partition to use it as a swap, and on 4.1.2 there were some apks. So if you want to go from 4.4 (and 4.3.) you must repartition it with this guide.
Then you download SlimKat or OmniROM and use its kernel to get TWRP, extract its ZIP and copy kernel to phone (it is boot.img in root of ZIP file). Then install Universal kernel flasher and some root explorer from the Play store and install kernel. When it is done go to recovery (you will have TWRP) and restore your backup.
P.S. You can use CoCore kernel with TWRP too. But the process is the same.
shut_down said:
I was lazy to give you full answer there.
First on 4.4. our developers repartitioned preload partition to use it as a swap, and on 4.1.2 there were some apks. So if you want to go from 4.4 (and 4.3.) you must repartition it with this guide.
Then you download SlimKat or OmniROM and use its kernel to get TWRP, extract its ZIP and copy kernel to phone (it is boot.img in root of ZIP file). Then install Universal kernel flasher and some root explorer from the Play store and install kernel. When it is done go to recovery (you will have TWRP) and restore your backup.
P.S. You can use CoCore kernel with TWRP too. But the process is the same.
Click to expand...
Click to collapse
Sorry for bothering you guys here, but does someone know how to flash cocore remix r 10 on any rom that is not stock? I mean any other flashable zip roms....... because everytime I end up in bootloop .
pictorul20 said:
Sorry for bothering you guys here, but does someone know how to flash cocore remix r 10 on any rom that is not stock? I mean any other flashable zip roms....... because everytime I end up in bootloop .
Click to expand...
Click to collapse
You get a bootloop because CoCore is for Stock ONLY. You can't use CoCore on any other ROM than on Stock based one.
@shut_down
My zip to restore is needed in 4.4 ROMs based on Team Canjica sources built till 14 June, after that date (since we removed /preload as swap partition on 15 June) is no longer needed with new builds this is only an info, most of the users don't know neither on what build they are :silly: better to continue to tell them to flash that zip before restoring that kind of ROMs, nice work.

Categories

Resources