Related
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
If you are sure bootloader is unlocked and using Linux OS, run fastboot commands as root/admin (as sudo).
oppili said:
If you are sure bootloader is unlocked and using Linux OS, run fastboot commands as root/admin (as sudo).
Click to expand...
Click to collapse
Yes, im sure. On bootloader mode is in red color - Phone unlocked, but i not using Linux, im on Windows 7 and this not help me....
Try fastboot oem unlock - command again.
If still not works, try fastboot erase of that *.img file before flashing that new img file.
oppili said:
Try fastboot oem unlock - command again.
When i try this command...
c:\Minimal ADB and Fastboot>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.004s]
finished. total time: 0.006s
If still not works, try fastboot erase of that *.img file before flashing that new img file.
Click to expand...
Click to collapse
I know about this but im above when i try erase all after this fastboot send me "Failed..." and i will be have dead phone, tell me - when i try erase command for all partitions - will be phone work wit fastboot after this??
THX
Are you the only user in pc ? Do you have admin rights ?
or
try any other pc
or
use Ubuntu OS
Lulu_568 said:
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
Click to expand...
Click to collapse
the reason for this case, that you should not apply updates while you are rooted.
(assuming that you are in lollipop stock )I suggest you check for the driver .. try to run adb (when your phone is in the active state, not powered off)
now, reboot to bootloader and try any other fastboot commands, like fastboot reboot (just to check that fastboot is responding to the device drivers..)
if it does respond, then I'm afraid you have a serious problem, if it doesn't respond, then you have to deal with the drivers, or you have to double check if your phone is unlocked
thilak devraj said:
the reason for this case, that you should not apply updates while you are rooted.
(assuming that you are in lollipop stock )I suggest you check for the driver .. try to run adb (when your phone is in the active state, not powered off)
now, reboot to bootloader and try any other fastboot commands, like fastboot reboot (just to check that fastboot is responding to the device drivers..)
if it does respond, then I'm afraid you have a serious problem, if it doesn't respond, then you have to deal with the drivers, or you have to double check if your phone is unlocked
Click to expand...
Click to collapse
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Lulu_568 said:
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Click to expand...
Click to collapse
then you should take it to the service center. the only best thing you can do now..
Lulu_568 said:
Yes, i allready try, commands like fastboot reboot, or devices - its work, but when i try fastboot flash .... or erase cache - Command not allowed, when fastboot oem unlock - data parse fail...fastboot just respond but i cannot write or erase flash - dont know why....
Click to expand...
Click to collapse
erase cache command is blocked by huawei in fastboot irrespective of locked or unlocked state. somewhere i read unlock lost permissions after update. if you have not tried unlock after update try it. driver can also be an issue, install hisuite it comes with drivers.
Lulu_568 said:
Hi,
i need help with this strange problem, i want update my phone to android 6.0 but when i start local update phone reboot and freeze on Honor logo, when i try factory reset or reboot to stock recovery menu - its same, again only Honor logo. Bootloader work ok, its unlocked, phone rooted, but when i for example try flash twrp recovery - fastboot send me "Failed...command not allowed"...Cant access recovery menu by fastboot, any app in phone and by keys combination too..also vol up, vol down and power for update from sd card not work, trying to seek for solutions to more than 2 weeks, can anybody here help me please?Thx.
Click to expand...
Click to collapse
Try this once,
copy firmware in folder 'dload' in sdcard root.
press vol up + vol down + power for 20 secs then release power but keep pressing vol up and vol down
shady143 said:
Try this once,
copy firmware in folder 'dload' in sdcard root.
press vol up + vol down + power for 20 secs then release power but keep pressing vol up and vol down
Click to expand...
Click to collapse
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Lulu_568 said:
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Click to expand...
Click to collapse
okay. are you sure the bootloader is unlocked? no harm done. just hold vol down + power up. and you get that green android with white background and the text in RED that says UNLOCKED. if its LOCKED, get the UNLOCK CODE first. just a reminder, you can only fastboot flash those *.imgs if you are UNLOCKED. and there are only some files will be flashed properly (recovery.img, recovery2.img, boot.img, you can try). yes, you can use Huawei Update Extractor to get those files, even in Marshmellow files. but for reviving the phone, use B067 Kitkat or any Kitkat you can get from Huawei Downloads.
1. Get into bootloader mode. I guess you already know how to do that. Plug the phone to wall charger. Yes, leave it charged with white screen showing. Leave it until you finished preparing the PC.
2. Make sure you can use fastboot. You can use Minimal ADB and Fastboot.exe found somewhere in XDA. And make sure that it can detect the phone when you write fastboot devices. It will show up if set up properly.
3. Huawei Update Extractor + Any Kitkat firmware. Extract everything. Note the tags beside each .img inside that Update Extractor. Youre gonna need those tags in order to flash properly.
4. Copy all those *.imgs that extracted into Minimal ADB and Fastboot folder. Check program files (x86).
5. Now ready the pc by launching that minimal adb and fastboot.exe as admin. THIS IS IMPORTANT!
6. fastboot devices. pull the phone from wall charger. plug it to pc. listen to usb connecting sound and driver installation. hit enter and the device should show up.
7. This is where its getting interesting. remember the tags? use that tags like this.
RECOVERY.img = fastboot flash RECOVERY RECOVERY.img
BOOT.img = fastboot flash BOOT BOOT.img
CHECK THE TAGS BEFORE FLASHING!!! and yes, just 5 or less files will be flashed successfully. Ignore it. fastboot reboot it. Yes, its stuck, plug it to the wall again while we prepare the microsd.
8. update.app file. Put that update.app file inside /microsd/dload/update.app folder. Put the microsd inside the phone. Yes, its stuck.
9. Now do the force update. when you see the emui logo, immediately plug it back to wall charger. wait until 100% and it rebooted itself, and you can see the language selection screen again.
DO WITH YOUR OWN RISK. Ive already done it, I hope it worked for you too.
zzztidurvirus said:
okay. are you sure the bootloader is unlocked? no harm done. just hold vol down + power up. and you get that green android with white background and the text in RED that says UNLOCKED. if its LOCKED, get the UNLOCK CODE first. just a reminder, you can only fastboot flash those *.imgs if you are UNLOCKED. and there are only some files will be flashed properly (recovery.img, recovery2.img, boot.img, you can try). yes, you can use Huawei Update Extractor to get those files, even in Marshmellow files. but for reviving the phone, use B067 Kitkat or any Kitkat you can get from Huawei Downloads.
1. Get into bootloader mode. I guess you already know how to do that. Plug the phone to wall charger. Yes, leave it charged with white screen showing. Leave it until you finished preparing the PC.
2. Make sure you can use fastboot. You can use Minimal ADB and Fastboot.exe found somewhere in XDA. And make sure that it can detect the phone when you write fastboot devices. It will show up if set up properly.
3. Huawei Update Extractor + Any Kitkat firmware. Extract everything. Note the tags beside each .img inside that Update Extractor. Youre gonna need those tags in order to flash properly.
4. Copy all those *.imgs that extracted into Minimal ADB and Fastboot folder. Check program files (x86).
5. Now ready the pc by launching that minimal adb and fastboot.exe as admin. THIS IS IMPORTANT!
6. fastboot devices. pull the phone from wall charger. plug it to pc. listen to usb connecting sound and driver installation. hit enter and the device should show up.
7. This is where its getting interesting. remember the tags? use that tags like this.
RECOVERY.img = fastboot flash RECOVERY RECOVERY.img
BOOT.img = fastboot flash BOOT BOOT.img
CHECK THE TAGS BEFORE FLASHING!!! and yes, just 5 or less files will be flashed successfully. Ignore it. fastboot reboot it. Yes, its stuck, plug it to the wall again while we prepare the microsd.
8. update.app file. Put that update.app file inside /microsd/dload/update.app folder. Put the microsd inside the phone. Yes, its stuck.
9. Now do the force update. when you see the emui logo, immediately plug it back to wall charger. wait until 100% and it rebooted itself, and you can see the language selection screen again.
DO WITH YOUR OWN RISK. Ive already done it, I hope it worked for you too.
Click to expand...
Click to collapse
First...many thanks for your interest!
Look, about bootloader, on boot mode is in red PHONE UNLOCKED, i try this command in fastboot:
C:\Minimal ADB and Fastboot>adb reboot bootloader
C:\Minimal ADB and Fastboot>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Minimal ADB and Fastboot>fastboot oem backdoor info
...
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ -0.000s]
finished. total time: -0.000s
so what is FB Lockstate??Is my bootloader unlocked or locked??
Here is another command which i try....
C:\Minimal ADB and Fastboot>fastboot -w
wiping userdata...
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: Command not allowed)
erasing 'userdata'...
FAILED (remote: Command not allowed)
finished. total time: 0.000s
Cant derermine partition type - is this problem?
I also try this....
C:\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (25034 KB)...
OKAY [ 0.783s]
writing 'recovery'...
OKAY [ 1.033s]
finished. total time: 1.831s
C:\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.801s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.801s
It seems that fastboot write recovery (with your help i need use admin rights now this work) but i still cant boot to recovery no matter how...
I can also flash and backup boot and recovery via Flashify or Rashr and when i open backup with HEX editor it seems that i succesfully upload TWRP but still cannot acess TWRP recovery....
This is all what i try in this time, of course i read your help words about Huawei extractor etc. but not try at this time, i hope i explain more detailed my problem. Look im not a newbie, i allready flash etc. my Lenovo and P9 lite what i have here but not understand where can be problem in this Honor 4x, it seems like corrupted recovery partition or can be problem in read only/write partition - i play with this option before....
anyway - run as admin - this help me a lot i think, THX and wait your answer.
EDIT: one thing, you think that when i try flash stock recovery (i can, no problem of course) it will be work?
Update: Big success, i just try flash stock recovery B064b and now im in stock recovery menu, im surprised but what now? I want update to Marshmallow 6.0....?
But in stock recovery is: phone and the data cannot be recovered. Continue?
Oh sorry, this is about "not sd card inserted" problem
What will now progress? I have inside B130 firmware and want Marshmallow, also TWRP recovery must i flash now especially for B130 firmware for work?
Update: Yes, all working now, factory reset, recovery etc. you help me a lot, only if you can tell me what number of firmware must i upload for Marshmallow, thx
Last update: So finally, coz im too hurry and dont want wait for your answer :angel:, i just upload from local update first Android 5.1.1. after this 6.0 and all is perfect and working!
My big thanks and kisses goes to you zzztidurvirus, im lucky and still cant beleive that all works, again thx!!
I did once on Win to revert back to Stock from CM12.1 by using img from update.app file. For my case, it's the MM update.app not working, I couldn't flash img files into phone, then I tried to flash files from LP, it worked. I boot into LP ROM and update from there to MM.
Hey hey people.
I was trying to upgrade my friend's Honor X4 Che2-L11 variant to 6.0 age from it's lollipop and ****ed up - big time. It seems to have a recovery, and it bootloops. I can't get it to install any update.app though, it either errors or gets stuck/crashes at 5%.
Now I am trying to flash a individual stock recovery with fastboot. Like the guide by zzztidurvirus there, but whenever I try to issue flash command this is what I get:
target reported max download size of 471859200 bytes
sending 'RECOVERY' (9304 KB)...
OKAY [ 0.258s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 0.261s
- so basically any flash command sends OKAY, Writing Fails with Command not allowed. Bootloader is unlocked, "PHONE unlocked" on screen and same status messages from fastboot as Lulu up there when making queries.
What gives, what could I try still?
Lulu_568 said:
This not work, when i try this - phone freeze on Honor logo, same as on factory reset or when i try go to Recovery menu...
I check 100 times that is bootloader unlocked, can be problem in bad root or...?
Click to expand...
Click to collapse
I had faced same issue but get back by using the that method.
Sumea said:
Hey hey people.
I was trying to upgrade my friend's Honor X4 Che2-L11 variant to 6.0 age from it's lollipop and ****ed up - big time. It seems to have a recovery, and it bootloops. I can't get it to install any update.app though, it either errors or gets stuck/crashes at 5%.
Now I am trying to flash a individual stock recovery with fastboot. Like the guide by zzztidurvirus there, but whenever I try to issue flash command this is what I get:
target reported max download size of 471859200 bytes
sending 'RECOVERY' (9304 KB)...
OKAY [ 0.258s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 0.261s
- so basically any flash command sends OKAY, Writing Fails with Command not allowed. Bootloader is unlocked, "PHONE unlocked" on screen and same status messages from fastboot as Lulu up there when making queries.
What gives, what could I try still?
Click to expand...
Click to collapse
In this case help me i think run adb/fastboot as a admin and i use stock recovery .img from Huawei extractor when i got first success with writing as i remember, hope this help you...
Lulu_568 said:
In this case help me i think run adb/fastboot as a admin and i use stock recovery .img from Huawei extractor when i got first success with writing as i remember, hope this help you...
Click to expand...
Click to collapse
Sadly not, as I tried both running ADB fastboot as admin from administrator command line and I tried three different recovery images from huawei, 6.0 (because the flash went bad during attempt to flash a 4.1EMUI with 6.0 B506 ROM for CHE2-L11) - And it keeps denying the write attempt with the same message. More info on the flash: I tried to TWRP flash from 5.1 rom to the EMUI4.1 6.0 ROM following guide someone made with updateappflasher.zip or something, during the flash the phone just crashed 60% in the bar and after that the phone is boot looping into recovery but it can't do anything. Like said any attempt to flash a stock rom even if a recovery seems to exist when booting VOL+ & POWER at the same time, but it will fail if attempting to do wipe data/factory reset in 40% mark. Forced updater can also be accessed but again, thanks to the firmware situation the phone is in it does not flash anything beyond 5% without crashing and being stuck or just giving an error message outright.
Only thing I might have not have is the right kind of ADB drivers but googling about CHE2-L11 I really cannot find a ADB drivers for this phone for life of me and dealing with windows 10 these days makes it worse. At least it used to be that I was with windows 7, back when I myself unlocked the bootloader of the phone and rooted it myself, I have some memory of that being harsh to deal with too, as I had hard time getting drivers that worked right with the phone etc.
I will check into this... At this point my friend bought a new phone already but I still will try to fix the phone for him since I feel personally pretty bad for pretty big mess I made.
I will also try this with a windows XP machine I have still, it is meant entirely for different things but at times like these it is somewhat nice to have a XP around. At least the darn driver problems are not a problem.
UPDATES:
I unbricked the phone. The stock recovery was intact enough for just a normal dload install of a update.app from huawei - why it did not initially work was probably the USB connection to computer and/or 64gig microSD card my friend had, not being compatible with Huawei's recovery updater. I myself had a 8gig card around which worked and I restored the phone ultimately to a 6.0 official ROM. I also went ahead to root it - and final find really was that the reason why recovery etc. would not flash, was because I wrote "fastboot flash RECOVERY twrp.img" - instead of "fastboot flash recovery twrp.img" - the latter works, and the all caps for "RECOVERY" results in illegal command error - and it was no bigger than that.
Meanwhile even after sorting this all out my friend already ended up buying a new phone so it hurts but I hope some other people find some info here useful.
My phone is stuck in boot screen since last night. Powering it off it just boot and stuck again. I've never modded the phone. It's stock with 2 months of life. I can access EMUI recovey menu to wipe cache or factory reset and connecting it to a pc and pressing volumkey down+bootkey It enter in FASTBOOT&RESCUE mode.
Is there something I can do to access phone memory? I really need to save some files.
I thought I could use adb to pull the files I need but I suppose I've usb debug disabled so the device is not recognized. It's recognized by fastboot.
Try to extract the following partitions: boot, recovery, cust & system with Huawei Updater Extractor and flash them manually by.
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
Of course you need to download the right firmware for your variant.
haky 86 said:
Try to extract the following partitions: boot, recovery, cust & system with Huawei Updater Extractor and flash them manually by.
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
Of course you need to download the right firmware for your variant.
Click to expand...
Click to collapse
What is the purpose in doing this? And What do u mean with right firmware for your variant?
(my bootloader is locked)
canaio said:
What is the purpose in doing this? And What do u mean with right firmware for your variant?
(my bootloader is locked)
Click to expand...
Click to collapse
I guess you can flash stock images even if your bootloader is locked.
about firmware variant: something like pra-lx1c432b115
try to reflash stock boot.img only if fastboot is recognized, I've the phone about 2 week and no issues for now.
haky 86 said:
I guess you can flash stock images even if your bootloader is locked.
about firmware variant: something like pra-lx1c432b115
try to reflash stock boot.img only if fastboot is recognized, I've the phone about 2 week and no issues for now.
Click to expand...
Click to collapse
Is there any way I can access files on my phone? I really need some recordings
I dont understand why the phone is not seen as adb device. I think usb debug is enabled because I used hisuite some days ago and I think that software needs it enabled
My phone is also stuck at the boot screen, I guess I have the same issue. My phone is also about 2 months old, not rooted, not unlocked, original software. I cannot boot into recovery mode, I can only boot into fastboot&rescue mode while holding the power button and volume down button when attach to the computer by a USB cable. The screen on my phone says the following:
-------
FASTBOOT&RESCUE MODE
Please Connect Usb Cable to
Your Computer and Open Hisuite
Android reboot reason:
AP_S_ABNORMAL
NA
volumekey_down_press_process_func
[android logo]
PHONE Locked
FRP Lock
rescue mode enter..
-------
I tried to flash boot.img and recovery.img (extracted from an update.app through HuaweiUpdateExtractor) but I get the following message in Minimal ADB and Fastboot:
-------
target reported max download size of 471859200 bytes
sending 'boot' (15498 KB)...
OKAY [ 0.625s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time 1.375s
-------
I assume that I'm not able to flash anything because my phone is locked and USB-debugging is not enabled on the phone through settings (and I cannot get there since the phone doesn't boot into Android). When I connect my phone to the PC the Hisuite does open automatically but it doesn't show any phone, nor cannot recover it through that software.
If only I could flash anything on the phone, that would be a step forward in reviving this phone. Does anyone have ideas?
FaceBeppy said:
My phone is also stuck at the boot screen, I guess I have the same issue. My phone is also about 2 months old, not rooted, not unlocked, original software. I cannot boot into recovery mode, I can only boot into fastboot&rescue mode while holding the power button and volume down button when attach to the computer by a USB cable. The screen on my phone says the following:
-------
FASTBOOT&RESCUE MODE
Please Connect Usb Cable to
Your Computer and Open Hisuite
Android reboot reason:
AP_S_ABNORMAL
NA
volumekey_down_press_process_func
[android logo]
PHONE Locked
FRP Lock
rescue mode enter..
-------
I tried to flash boot.img and recovery.img (extracted from an update.app through HuaweiUpdateExtractor) but I get the following message in Minimal ADB and Fastboot:
-------
target reported max download size of 471859200 bytes
sending 'boot' (15498 KB)...
OKAY [ 0.625s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time 1.375s
-------
I assume that I'm not able to flash anything because my phone is locked and USB-debugging is not enabled on the phone through settings (and I cannot get there since the phone doesn't boot into Android). When I connect my phone to the PC the Hisuite does open automatically but it doesn't show any phone, nor cannot recover it through that software.
If only I could flash anything on the phone, that would be a step forward in reviving this phone. Does anyone have ideas?
Click to expand...
Click to collapse
Unlock fastboot. Google it.
p8tgames said:
Unlock fastboot. Google it.
Click to expand...
Click to collapse
I guess you mean unlock bootloader? I emailed Huawei with the question if I could get Unlock Bootloader code. To get that I need the phone's serial number, IMEI number and product ID. The first two I have, the product ID I can't get, because I cannot boot into Android and dial *#*#1357946#*#*. I read somewhere that there is an algorithm to figure out the product ID, there's even an Huawei Product ID Generator.exe, but the P8 lite 2017 isn't supported. If I know the product ID I can get the Unlock Bootloader code, unlock the bootloader and hopefully flash a new recovery and boot and rom.
i have the same issue. how did you fix yours?
haky 86 said:
Try to extract the following partitions: boot, recovery, cust & system with Huawei Updater Extractor and flash them manually by.
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
Of course you need to download the right firmware for your variant.
Click to expand...
Click to collapse
sir haky no cust.img was in there CRC.img and CURVER.img was only in there
EXE bahotin said:
sir haky no cust.img was in there CRC.img and CURVER.img was only in there
Click to expand...
Click to collapse
Is your bootloader unlocked if yes give a try with above method.
If no go to the nearest service center as it is happening to many devices.
miststudent2011 said:
Is your bootloader unlocked if yes give a try with above method.
If no go to the nearest service center as it is happening to many devices.
Click to expand...
Click to collapse
yes i unlock my bootloader
I am having the same problem I can't flash anything using the ADB & Fastboot and my device is stuck at loading. Can't even access the TWRP =/
Hi, i have the same issue : phone stuck on Huawei Logo, original firmware, bootloader locked.
I cannot unlock bootloader since Huawei unlock plugin has closed.
I can only access fastboot mode but flashing commands seems to be "not allowed".
How did you managed to solve this ?
https://forum.xda-developers.com/p8...on/guide-unbrick-huawei-p8-lite-2017-t3766678
YoussefR said:
https://forum.xda-developers.com/p8...on/guide-unbrick-huawei-p8-lite-2017-t3766678
Click to expand...
Click to collapse
Hi YoussefR, thanks for the answer.
But I cannot enter the eRecoery mode, when I try the phone is still stuck on Huawei Logo
Obviously i cannot access to the playstore neither
Avorsan said:
Hi YoussefR, thanks for the answer.
But I cannot enter the eRecoery mode, when I try the phone is still stuck on Huawei Logo
Obviously i cannot access to the playstore neither
Click to expand...
Click to collapse
Press The Vol.UP+VOL.DOWN+PowerButton at the same time even if the phone is on it will reboot and try to install a frimware it will fail the reboot to eRecovery
If it doesn't
Connect the phone to a USB cable and press the VOL.UP+PowerButton
YoussefR said:
Press The Vol.UP+VOL.DOWN+PowerButton at the same time even if the phone is on it will reboot and try to install a frimware it will fail the reboot to eRecovery
If it doesn't
Connect the phone to a USB cable and press the VOL.UP+PowerButton
Click to expand...
Click to collapse
Like I said, the combination doesn't work, it stuck on huawei logo and it doesn't go futher . The only mode i can access is fastboot with cable + vol down + power.
Avorsan said:
Like I said, the combination doesn't work, it stuck on huawei logo and it doesn't go futher . The only mode i can access is fastboot with cable + vol down + power.
Click to expand...
Click to collapse
Sorry, But these combinations got me into eRecovery
YoussefR said:
Sorry, But these combinations got me into eRecovery
Click to expand...
Click to collapse
I believe you, surely we don't share the same problem. I didn't flash anything on my phone, it just stop booting without a reason, like the original poster said.
Guys, here's the problem:
I've clicked reboot to recovery in power menu in Pure Nexus ROM and now I'm stuck in recovery bootloop.
The phone tries to boot into recovery, shows the leeco recovery message and then flashes red triangle android robot and just shows black screen. If I connect to PC at that point, adb recognises a device in recovery mode. But I can't flash anything.
If I try long enough I can boot into fastboot, but then I get the "Android Bootloader Interface" in the device manager - but adb doesn't see the device.
Any suggestions? Can i somehow make ADB see the device so I can reflash TWRP?
ziembus said:
Guys, here's the problem:
I've clicked reboot to recovery in power menu in Pure Nexus ROM and now I'm stuck in recovery bootloop.
The phone tries to boot into recovery, shows the leeco recovery message and then flashes red triangle android robot and just shows black screen. If I connect to PC at that point, adb recognises a device in recovery mode. But I can't flash anything.
If I try long enough I can boot into fastboot, but then I get the "Android Bootloader Interface" in the device manager - but adb doesn't see the device.
Any suggestions? Can i somehow make ADB see the device so I can reflash TWRP?
Click to expand...
Click to collapse
Dear
Press and hold vol - and power button together, then your phone will boot into fastboot mode.
then simply you can use fastboot commond below to flash recovery.
fastboot flash recovery recovery.img
OK I've managed to get my PC to recognize the device. Now fastboot sees the phone.
The thing is that I can't flash anything. I had probably disabled "Allow Oem Unlock" in Developer options.
So I have fastboot but can't flash anything there. Any suggestions? If I reboot without holding Vol- the phone tries to boot into recovery and fails.
EDIT: At this point I can either boot into fastboot, where I can't do: "fastboot oem unlock-go"
Or boot into recovery, which doesn't load properly, all that's left is a blank screen - but ADB sees a device in recovery mode"
Is there anything I can do to get out of those two options?
ziembus said:
OK I've managed to get my PC to recognize the device. Now fastboot sees the phone.
The thing is that I can't flash anything. I had probably disabled "Allow Oem Unlock" in Developer options.
So I have fastboot but can't flash anything there. Any suggestions? If I reboot without holding Vol- the phone tries to boot into recovery and fails.
EDIT: At this point I can either boot into fastboot, where I can't do: "fastboot oem unlock-go"
Or boot into recovery, which doesn't load properly, all that's left is a blank screen - but ADB sees a device in recovery mode"
Is there anything I can do to get out of those two options?
Click to expand...
Click to collapse
I want to know which recovery you tried to flash through fastboot. It may not allow you flashing twrp ultill oem is locked. You can try flashing stocking recovery.
ziembus said:
OK I've managed to get my PC to recognize the device. Now fastboot sees the phone.
The thing is that I can't flash anything. I had probably disabled "Allow Oem Unlock" in Developer options.
So I have fastboot but can't flash anything there. Any suggestions? If I reboot without holding Vol- the phone tries to boot into recovery and fails.
EDIT: At this point I can either boot into fastboot, where I can't do: "fastboot oem unlock-go"
Or boot into recovery, which doesn't load properly, all that's left is a blank screen - but ADB sees a device in recovery mode"
Is there anything I can do to get out of those two options?
Click to expand...
Click to collapse
When in fastboot mode, you can try to boot twrp from the pc with
Code:
fastboot boot nameoftwrp.img
JamBax said:
When in fastboot mode, you can try to boot twrp from the pc with
Click to expand...
Click to collapse
Tried that, it tells me that I can't do this because the phone os locked. Now I'm looking for Stock recovery IMG for x522
EDIT: Trying to flash stock recovery gets me this message:
target reported max download size of 536870912 bytes
sending 'recovery' (13904 KB)...
OKAY [ 0.435s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.451s
Its the same whether its TWRP image or stock recovery image.
I was thinking of using this:
https://forum.xda-developers.com/le-2/development/tools-unbrick-thread-leeco-le-2-x52x-t3634609
But, unfortunately, there is no file for American x522.
It sucks to be able to get into fastboot and not be able to do anything.
Thanks for the suggestions so far
ziembus said:
Tried that, it tells me that I can't do this because the phone os locked. Now I'm looking for Stock recovery IMG for x522
EDIT: Trying to flash stock recovery gets me this message:
target reported max download size of 536870912 bytes
sending 'recovery' (13904 KB)...
OKAY [ 0.435s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.451s
Its the same whether its TWRP image or stock recovery image.
I was thinking of using this:
https://forum.xda-developers.com/le-2/development/tools-unbrick-thread-leeco-le-2-x52x-t3634609
But, unfortunately, there is no file for American x522.
It sucks to be able to get into fastboot and not be able to do anything.
Thanks for the suggestions so far
Click to expand...
Click to collapse
Try Leeco AIO tool kit to reboot your device into recovery . It's working for me
leco le 2 x520 recovery problem
I have a problem with recovery in le 2 x520. It installs via fastboot by unlocking the bootloader but stops at the Le recovery logo and nothing else happens. I installed from version 3.0.2.0 to 3.1.1.1 and nothing happens, I do not have recovery and writes everything okey went. what is going on ??
I have same problem. how to fix
I have a new one (acutally two, got them for U$D 108.99 each one)
Using ADB devices it recognize the UID like 0123456789ABCDEF, so I think the recovery is corrupted, intentional or not, it is blocking fastboot and recovery to load normally.
At this point I can't do anything.... any suggestions?
You solved it ?
I having the same issue maybe the issue is with stock rom since i flashed in normal twrp,chinese twrp and also that stock recovery.
****!
what I have done is this:
Rooted phone
Installed TWRP
than I updated (stupid)
Lost root than I wanted to install Custom frimware what didnt work
Factory resetted phone, phone doesnt boot anymore now.
I can only access fastboot but I can not get fastboot to work on pc installed many different drivers just dont work.
lucmaas99 said:
what I have done is this:
Rooted phone
Installed TWRP
than I updated (stupid)
Lost root than I wanted to install Custom frimware what didnt work
Factory resetted phone, phone doesnt boot anymore now.
I can only access fastboot but I can not get fastboot to work on pc installed many different drivers just dont work.
Click to expand...
Click to collapse
Every two or three days people report here they bricked phones by forcing update or Factory reset (or relocking Bootloader) from custom or rooted phones (or by having TWRP) - one must first go back to the original stock firmware he had, before upgrading/resetting/relocking...
And this thread will also not help to somebody else -
since 'somebody' will not read (before bricking the phone) ;(
---
Do you still have TWRP - use HWOTA to flash stock
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
If you have no TWRP but Fastboot is showing Bootloader unlocked, you should be able to flash TWRP.
If Fastboot is showing Bootloader locked but FRP unlocked, you should be able to unlock Bootloader.
But if there is no more TWRP and Fastboot is showing FRP and Bootloader locked - maybe DC Phoenix can help you
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
I used this command in fastboot: fastboot oem device-info
But I get this error: FAILED (remote: Command not allowed)
On my phone it says: Phone: unlocked and FRP: Lock
lucmaas99 said:
I used this command in fastboot: fastboot oem device-info
But I get this error: FAILED (remote: Command not allowed)
On my phone it says: Phone: unlocked and FRP: Lock
Click to expand...
Click to collapse
Yeah, this is not adb/fastboot drivers problem but a fact that you either did not keep OEM Unlocking or it locked due to your procedures. But you have no system to boot in and to unlock.
Is TWRP still on? Press and keep pressing Power until phone shuts down (from Fastboot).
Try to boot to recovery by keeping pressed Vol + and Power -- if it boots to TWRP proceed by HWOTA as above.
If it boots to eRecovery instead, maybe you can try Factory reset (although, I don't believe it will work)
If you don't have recovery anymore (and you have no system and FRP is locked) then you really bricked the phone, you should pay for DC Phoenix and try to unbrick
zgfg said:
Yeah, this is not adb/fastboot drivers problem but a fact that you either did not keep OEM Unlocking or it locked due to your procedures. But you have no system to boot in and to unlock.
Is TWRP still on? Press and keep pressing Power until phone shuts down (from Fastboot).
Try to boot to recovery by keeping pressed Vol + and Power -- if it boots to TWRP proceed by HWOTA as above.
If it boots to eRecovery instead, maybe you can try Factory reset (although, I don't believe it will work)
If you don't have recovery anymore (and you have no system and FRP is locked) then you really bricked the phone, you should pay for DC Phoenix and try to unbrick
Click to expand...
Click to collapse
I cannot get into to recovery but when I let the phone die and than it starts normally,
but everytime it turns off its get back stuck in bootloop I got my oem key when it booted back but now I tried unlocking it agian but it says this:
C:\adb>fastboot oem unlock <code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot reboot bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.024s
lucmaas99 said:
I cannot get into to recovery but when I let the phone die and than it starts normally,
but everytime it turns off its get back stuck in bootloop I got my oem key when it booted back but now I tried unlocking it agian but it says this:
C:\adb>fastboot oem unlock <code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot reboot bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.024s
Click to expand...
Click to collapse
I cannot flash anything because I cannnot enable USB debugging in developers options
zgfg said:
Yeah, this is not adb/fastboot drivers problem but a fact that you either did not keep OEM Unlocking or it locked due to your procedures. But you have no system to boot in and to unlock.
Is TWRP still on? Press and keep pressing Power until phone shuts down (from Fastboot).
Try to boot to recovery by keeping pressed Vol + and Power -- if it boots to TWRP proceed by HWOTA as above.
If it boots to eRecovery instead, maybe you can try Factory reset (although, I don't believe it will work)
If you don't have recovery anymore (and you have no system and FRP is locked) then you really bricked the phone, you should pay for DC Phoenix and try to unbrick
Click to expand...
Click to collapse
What can I do I can access phone but cannot unlock bootloader because cannot use remote commands and I can not get into any recovery menu I am out of idea's
lucmaas99 said:
I cannot flash anything because I cannnot enable USB debugging in developers options
Click to expand...
Click to collapse
You can boot to system?
Which (full name) build it shows in About?
Can you enable Developer options - then why cannot you enable USB debugging?!
You must first enable Allow ADB debugging in charge... and only then USB debugging -otherwise USB debugging switches off
zgfg said:
You can boot to system?
Which (full name) build it shows in About?
Can you enable Developer options - then why cannot you enable USB debugging?!
You must first enable Allow ADB debugging in charge... and only then USB debugging -otherwise USB debugging switches off
Click to expand...
Click to collapse
Modelnumber: EVA-L19
Build: NRD90M test-keys
I think I should not supposed to have test-keys doesnt seem correct?
So I got my phone to boot but everytime I want to do something in recovery or something else It wont boot anymore and than I need to make the battery run out of juice. are there anyfix without needing root recovery or fastboot.
ADB wont work because usb debugging wont turn on (tried many things), Fastboot kinda works but gives the error (remote command not allowed)
Cannot get into any Recovery I can boot to OS
THIS IS NOT GUARANTEED TO WORK! If it does not work, feel free to let me know here and i will do what i can to help, but remember I probably can't help everyone.
IMPORTANT: ON XDA-LABS APP THIS POST IS KINDA BROKEN IDK WHY SO LOAD IT IN BROWSER!!!!
If the guide worked for you, please hit thanks button! If you are generous and want to donate pm me
What this can fix:
When booting, you get this error:
Func NO : 10 (boot image)
Error NO : 2 (load image)
When booting to recovery, you get this error:
Func NO : 11 (recovery image)
Error NO : 2 (load image)
Bootloops
Can't boot into fastboot
Can't boot into recovery for other reasons
Can't boot to system for other reasons
ETC...
First thing first, there really isnt a way to keep your data so expect it all to be gone, unless it is saved on an external sd card. Also, this guide is specifically for the PRA-LX1 model, however it might work with other p8 lite 2017 models and a similar method may work with other huawei phones.
Requirements:
The device boots in to fastboot mode. (If it does not, scroll down to problem 1)
You have a pc with a usb port and fastboot/adb installed
You have a micro usb to usb cable.
Unlocked bootloader and oem unlock.
Micro sd card
Problem 1: Can't boot into fastboot?
Try this:
1. Make sure device is fully powered off
2. Connect device to any pc.
3. Press and hold volume- and power button at the same time until your screen turns on.
If this doesn't work then unfortunately i can't help...
Problem 2: Only fastboot boots, but not recovery or os:
Lets start by flashing TWRP...
If your device was on android nougat (7.x.x) or the rom you were flashing was nougat based then do this:
Download this file:
https://drive.google.com/file/d/1TjNHI9FNdwQS2HphsjGfQCHKephibiKn/view
Boot into fastboot on your phone and open fastboot on your pc
Type: fastboot flash recovery *Nameofrecovery.img*
-----------------------------------------------------------------------------------------------------------------
If your device was on android oreo (8.x.x) or the rom you were flashing was oreo based then do this:
Download this file: https://drive.google.com/file/d/190zqju8ZmwZCzI4WXtujgKLFXvvuWTk8/view?usp=sharing
Boot into fastboot on your phone and open fastboot on your pc
Type: fastboot flash recovery_ramdisk *Nameofrecovery.img*
https://www.mrviking.co.uk/440246340
Problem 3: You can only boot into fastboot and TWRP recovery:
Thats OK! Heres how to restore the phone:
IMPORTANT: THE FILES LINKED HERE ARE ONLY FOR PRA-LX1 DEVICES! If your device has a different model number, or these files did not work for you, follow this guide to get files for your device: https://www.mrviking.co.uk/440246340
This will also update your device to android oreo!
Put the micro sd card in your pc.
On your pc download these files:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 (Download 0.3)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1194/g104/v148634/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...altice_all/update_full_PRA-L11_altice_all.zip
http://update.hicloud.com:8180/TDS/...34/f1/full/public/update_data_full_public.zip
Now Rename update_full_PRA-L11_altice_all.zip to update_all_hw.zip
Also rename update_data_full_public.zip to update_data_public.zip
Put all four files: update.zip, update_all_hw.zip, update_data_public.zip and HuRUpdater_0.3.zip into one folder on the external sdcard.
Take sdcard out of pc and put it into phone.
Boot into twrp tap on mount and select all partitions
Make sure 'mount system read only' is NOT checked.
Go back to twrp home
Go to install, find the huruupdater zip file
Flash ONLY hurupdater, DO NOT FLASH ANY OTHER ZIPS.
Follow instructions on screen.
Reboot to system and wait for the device to boot.
If it didnt boot, dont worry:
Go back to fastboot mode on your phone and pc, and download this file: https://drive.google.com/file/d/1daIos0yagHk9Kg-5hXLDwNYDHjP_N0EM/view?usp=sharing
Flash it with fastboot using:
fastboot flash recovery_ramdisk *Nameofrecovery.img*
now boot into recovery wipe cache wipe date/factory reset reboot to system
If none of this worked, try this last resort. (Likely won't work but it is worth a shot)
Firstly, place your micro sdcard into your pc. Create a folder called 'dload' in the root of it.
Now, locate the firmware files you downloaded from firmware finder.
Open the main update.zip file and extract the 'UPDATE.APP' file to the 'dload' folder in your sdcard.
Place sdcard back in phone
Make sure phone is powered off. (Can't power it off? Unplug anything connected (charger, pc, etc...) and hold the power button until screen goes black)
Hold all three function keys (VOL+,VOL- and POWER) until screen turns on.
Hope it works and wait
If it worked, please hit thanks button! If you want to donate pm me.
If it DID NOT work, post a reply here and either me or someone else will try and help.
Thanks!
tringo24 said:
I've got the same problem - I can boot to TWRP and bootloader.
I've wiped Dalvik/ART Cache, Cache, Data, System and formatted Data
When I try to flash HuRUpdater_0.4.zip I get:
Error finding input device
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/HuRUpdater_0.4.zip'
I've tried copying UPDATE.APP to 'dload' folder on external SD card, and EMUI hangs at 5%.
Is there anything else I can try? What does "Updater process ended with ERROR: 1" actually mean? I've googled it but haven't found anything useful.
Any help would be really appreciated!
Click to expand...
Click to collapse
Top tip - always follow all of the instructions. the version of TWRP listed in the instructions is the only one to use. I was using an incomaptible version. My phone if fixed!
tringo24 said:
I've got the same problem - I can boot to TWRP and bootloader.
I've wiped Dalvik/ART Cache, Cache, Data, System and formatted Data
When I try to flash HuRUpdater_0.4.zip I get:
Error finding input device
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/HuRUpdater_0.4.zip'
I've tried copying UPDATE.APP to 'dload' folder on external SD card, and EMUI hangs at 5%.
Is there anything else I can try? What does "Updater process ended with ERROR: 1" actually mean? I've googled it but haven't found anything useful.
Any help would be really appreciated!
Click to expand...
Click to collapse
Always use TWRP from OP
And if its not working, try Flashing Stock recovery and boot it and do tap some options e.g. reset/ clear cache etc. ( I got my mobile fixed via this method as Internal Memory got corrupted because of incompatible TWRP )
For problem 1 fix : Fully shutdown , connect the phone to via usb to pc , and fast hold down the volume - . Cheers
Edit : or the same : usb , power and volume - till you see the huawei logo , then just hold volume -
Frp and boot locked. dload/UPDATE.APP in fat32 formatted sd still error At 5%. Any way to recovery?
Thank you !!!
You saved my phone :victory:
lupastro82 said:
Frp and boot locked. dload/UPDATE.APP in fat32 formatted sd still error At 5%. Any way to recovery?
Click to expand...
Click to collapse
Force shut down the device (Hold power button) if it is on.
Connect to a pc
Hold down POWER and VOL- buttons untill screen turns on
If you see a screen with an android robot saying FASTBOOT at the top let me know, if not tell me that :good:
MrViking said:
Force shut down the device (Hold power button) if it is on.
Connect to a pc
Hold down POWER and VOL- buttons untill screen turns on
If you see a screen with an android robot saying FASTBOOT at the top let me know, if not tell me that :good:
Click to expand...
Click to collapse
yes, i've.
phone relocked and frp lock. really bad state.
all caused after a magisk installation via magisk manager (this brick my boot).
my giant error, test to install without verify if frp still unlocked and this has caused a giant brick :/
i need a way to bypass-removed frp, and unlock again bootloader.
then, reinstall twrp and recovery my system.
all is in standby cause frp
yes, i know, exist some windows (i use debian) pay app, but 19€ for "just a click" to a device that atm cost about 130€ ... i think isn't a great price.
i really cannot understood why huawei cannot make a real recovery tool.
----
edit, thanks to dc unlocker and some test, now i've bootloader unlocker, but frp remain locked - then, i still cannot fix.
any help? :|
lupastro82 said:
yes, i've.
phone relocked and frp lock. really bad state.
all caused after a magisk installation via magisk manager (this brick my boot).
my giant error, test to install without verify if frp still unlocked and this has caused a giant brick :/
i need a way to bypass-removed frp, and unlock again bootloader.
then, reinstall twrp and recovery my system.
all is in standby cause frp
yes, i know, exist some windows (i use debian) pay app, but 19€ for "just a click" to a device that atm cost about 130€ ... i think isn't a great price.
i really cannot understood why huawei cannot make a real recovery tool.
----
edit, thanks to dc unlocker and some test, now i've bootloader unlocker, but frp remain locked - then, i still cannot fix.
any help? :|
Click to expand...
Click to collapse
I'm exactly in ur same situation
I need ****ing help to unlock frp then i can solve the rest by my own.
lupastro82 said:
yes, i've.
phone relocked and frp lock. really bad state.
all caused after a magisk installation via magisk manager (this brick my boot).
my giant error, test to install without verify if frp still unlocked and this has caused a giant brick :/
i need a way to bypass-removed frp, and unlock again bootloader.
then, reinstall twrp and recovery my system.
all is in standby cause frp
yes, i know, exist some windows (i use debian) pay app, but 19€ for "just a click" to a device that atm cost about 130€ ... i think isn't a great price.
i really cannot understood why huawei cannot make a real recovery tool.
----
edit, thanks to dc unlocker and some test, now i've bootloader unlocker, but frp remain locked - then, i still cannot fix.
any help? :|
Click to expand...
Click to collapse
Have you tried flashing stock recovery img from fastboot?
MrViking said:
Have you tried flashing stock recovery img from fastboot?
Click to expand...
Click to collapse
i can try, but i think cannot work if frp is locked :/
atm, now, on boot i see advice for unlocked bootloader, then access to erecovery (but also if i fix dns with firmware finder dns and check firmware, still failed - and no reset etc).
if i reboot/power on with volume down > green robot with:
Code:
Attention!
Please update system again
Error NO : 10 (boot image) / or
Error NO : 2 (load failed)
if i reboot/power on with both volume button, check dload recovery, but still failed (damned huawei!!!).
now i check to work via fastboot. thanks.
---
[email protected]:~$ sudo $(which fastboot) flash recovery ./Scrivania/twrp-3.2.1-0-twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (4690 KB)...
OKAY [ 0.152s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.158s
[email protected]:~$ sudo $(which fastboot) oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.001s]
finished. total time: 0.001s
[email protected]:~$
[email protected]:~$ sudo $(which fastboot) flash recovery_ramdisk ./Scrivania/recovery.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (11204 KB)...
OKAY [ 0.362s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.369s
[email protected]:~$ sudo $(which fastboot) boot ./Scrivania/recovery.img
downloading 'boot.img'...
OKAY [ 0.378s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.381s
[email protected]:~$
Click to expand...
Click to collapse
lupastro82 said:
i can try, but i think cannot work if frp is locked :/
atm, now, on boot i see advice for unlocked bootloader, then access to erecovery (but also if i fix dns with firmware finder dns and check firmware, still failed - and no reset etc).
if i reboot/power on with volume down > green robot with:
Code:
Attention!
Please update system again
Error NO : 10 (boot image) / or
Error NO : 2 (load failed)
if i reboot/power on with both volume button, check dload recovery, but still failed (damned huawei!!!).
now i check to work via fastboot. thanks.
---
Click to expand...
Click to collapse
Wow thats a pretty bad brick. First try to boot to recovery like this:
1. Make sure phone is off.
2. Hold power and volume up until screen goes on.
3. When screen goes on quickly take fingers off buttons.
If it does not work, I think your only hope is to use funky huawei.
Do what this guy did (read the bottom of the first post)
https://forum.xda-developers.com/honor-7x/development/frp-lock-help-to-unbrick-honor-7x-t3769345
lupastro82 said:
yes, i've.
phone relocked and frp lock. really bad state.
all caused after a magisk installation via magisk manager (this brick my boot).
my giant error, test to install without verify if frp still unlocked and this has caused a giant brick :/
i need a way to bypass-removed frp, and unlock again bootloader.
then, reinstall twrp and recovery my system.
all is in standby cause frp
yes, i know, exist some windows (i use debian) pay app, but 19€ for "just a click" to a device that atm cost about 130€ ... i think isn't a great price.
i really cannot understood why huawei cannot make a real recovery tool.
----
edit, thanks to dc unlocker and some test, now i've bootloader unlocker, but frp remain locked - then, i still cannot fix.
any help? :|
Click to expand...
Click to collapse
Can you update to stock through erecovery via wifi? I had my phone frp locked + bl locked + bricked system. eRecovery was the only way out to get into a working system.
The unlock tool that costs too much is b.s and only works if it was locked because of Google Play account (tried it, did not unlock my frp).
After erecovery update and having a system, google play account was also locked because of stock firmware, this time I used the unlock tool. I used firmware finder afterwards for forcing an oreo update (because bl unlocking was grayed out). After oreo update, i enabled bl unlock from dev options and unlocked my bl again through fastboot. frp got unlocked along the way, i forgot when.
i can access in eRecovery, but when i check to download by wifi i still receive: "Getting package info failed" :/
-
via dload (8gb sd in fat 32 with only dload folder and old release UPDATE.APP inside it - but tested with more...) stuck for minuts at 5%, then reboot!
lupastro82 said:
i can access in eRecovery, but when i check to download by wifi i still receive: "Getting package info failed" :/
-
via dload (8gb sd in fat 32 with only dload folder and old release UPDATE.APP inside it - but tested with more...) stuck for minuts at 5%, then reboot!
Click to expand...
Click to collapse
Did you try what I mentioned?
MrViking said:
i can try, but i think cannot work if frp is locked :/
atm, now, on boot i see advice for unlocked bootloader, then access to erecovery (but also if i fix dns with firmware finder dns and check firmware, still failed - and no reset etc).
if i reboot/power on with volume down > green robot with:
Wow thats a pretty bad brick. First try to boot to recovery like this:
1. Make sure phone is off.
2. Hold power and volume up until screen goes on.
3. When screen goes on quickly take fingers off buttons.
If it does not work, I think your only hope is to use funky huawei.
Do what this guy did (read the bottom of the first post)
https://forum.xda-developers.com/honor-7x/development/frp-lock-help-to-unbrick-honor-7x-t3769345
Click to expand...
Click to collapse
sure yes, ill try, and enter in dload mode (but still fail) :/
MrViking said:
THIS IS NOT GUARANTEED TO WORK! If it does not work, feel free to let me know here and i will do what i can to help, but remember I probably can't help everyone.
If the guide worked for you, please hit thanks button! If you are generous and want to donate pm me
What this can fix:
When booting, you get this error:
Func NO : 10 (boot image)
Error NO : 2 (load image)
When booting to recovery, you get this error:
Func NO : 11 (recovery image)
Error NO : 2 (load image)
Bootloops
Can't boot into fastboot
Can't boot into recovery for other reasons
Can't boot to system for other reasons
ETC...
First thing first, there really isnt a way to keep your data so expect it all to be gone, unless it is saved on an external sd card. Also, this guide is specifically for the PRA-LX1 model, however it might work with other p8 lite 2017 models and a similar method may work with other huawei phones.
Requirements:
The device boots in to fastboot mode. (If it does not, scroll down to problem 1)
You have a pc with a usb port and fastboot/adb installed
You have a micro usb to usb cable.
Unlocked bootloader and oem unlock.
Micro sd card
Problem 1: Can't boot into fastboot?
Try this:
1. Make sure device is fully powered off
2. Connect device to any pc.
3. Press and hold volume- and power button at the same time until your screen turns on.
If this doesn't work then unfortunately i can't help...
Problem 2: Only fastboot boots, but not recovery or os:
Lets start by flashing TWRP...
If your device was on android nougat (7.x.x) or the rom you were flashing was nougat based then do this:
Download this file:
https://drive.google.com/file/d/1TjNHI9FNdwQS2HphsjGfQCHKephibiKn/view
Boot into fastboot on your phone and open fastboot on your pc
Type: fastboot flash recovery *Nameofrecovery.img*
-----------------------------------------------------------------------------------------------------------------
If your device was on android oreo (8.x.x) or the rom you were flashing was oreo based then do this:
Download this file: https://drive.google.com/file/d/190zqju8ZmwZCzI4WXtujgKLFXvvuWTk8/view?usp=sharing
Boot into fastboot on your phone and open fastboot on your pc
Type: fastboot flash recovery_ramdisk *Nameofrecovery.img*
https://www.mrviking.co.uk/440246340
Problem 3: You can only boot into fastboot and TWRP recovery:
Thats OK! Heres how to restore the phone:
IMPORTANT: THE FILES LINKED HERE ARE ONLY FOR PRA-LX1 DEVICES! If your device has a different model number, or these files did not work for you, follow this guide to get files for your device: https://www.mrviking.co.uk/440246340
This will also update your device to android oreo!
Put the micro sd card in your pc.
On your pc download these files:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 (Download 0.3)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1194/g104/v148634/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...altice_all/update_full_PRA-L11_altice_all.zip
http://update.hicloud.com:8180/TDS/...34/f1/full/public/update_data_full_public.zip
Now Rename update_full_PRA-L11_altice_all.zip to update_all_hw.zip
Also rename update_data_full_public.zip to update_data_public.zip
Put all four files: update.zip, update_all_hw.zip, update_data_public.zip and HuRUpdater_0.3.zip into one folder on the external sdcard.
Take sdcard out of pc and put it into phone.
Boot into twrp tap on mount and select all partitions
Make sure 'mount system read only' is NOT checked.
Go back to twrp home
Go to install, find the huruupdater zip file
Flash ONLY hurupdater, DO NOT FLASH ANY OTHER ZIPS.
Follow instructions on screen.
Reboot to system and wait for the device to boot.
If it didnt boot, dont worry:
Go back to fastboot mode on your phone and pc, and download this file: https://drive.google.com/file/d/1daIos0yagHk9Kg-5hXLDwNYDHjP_N0EM/view?usp=sharing
Flash it with fastboot using:
fastboot flash recovery_ramdisk *Nameofrecovery.img*
now boot into recovery wipe cache wipe date/factory reset reboot to system
If none of this worked, try this last resort. (Likely won't work but it is worth a shot)
Firstly, place your micro sdcard into your pc. Create a folder called 'dload' in the root of it.
Now, locate the firmware files you downloaded from firmware finder.
Open the main update.zip file and extract the 'UPDATE.APP' file to the 'dload' folder in your sdcard.
Place sdcard back in phone
Make sure phone is powered off. (Can't power it off? Unplug anything connected (charger, pc, etc...) and hold the power button until screen goes black)
Hold all three function keys (VOL+,VOL- and POWER) until screen turns on.
Hope it works and wait
If it worked, please hit thanks button! If you want to donate pm me.
If it DID NOT work, post a reply here and either me or someone else will try and help.
Thanks!
Click to expand...
Click to collapse
Cheers Bruh Thank u so MUCH
Blackblock92 said:
Cheers Bruh Thank u so MUCH
Click to expand...
Click to collapse
No problem! Glad to hear it works
I've made a tutorial 1 day before you ^^
Hello i've made a tutorial on my thread for my solution to unbrick it so if you need to unbrick your phone with a different method
you can use my tutorial it has worked perfecty on my p8 lite 2017 and now he's on oreo
my phone personnaly was totaly broken i flashed some random things on my phone etc this is working 100% cause you are about to clear all the old android system for the new oreo one so for the peoples who got the same problem than me and got stuck
on the fastboot&rescue mode when VOLUME- + POWER for like 5 seconds with the phone off
(for the peoples who can't power off your device you can download the "universal fastboot and ADB tool" app and then click on reboot phone in the fastboot part)
the solution is to :
-Download the rom stock Oreo android 8.0 stechguide.com/huawei-p8-lite-2017-b370-oreo-firmware/
-exctract all files from the HuaweiUpdateExtractor find it on google it's easy just download update.zip
-extract and put the UPDATE.APP in the HuaweiUpdateExtractor
-run srk tool for huawei
-type 000 and press enter
-and now you have to flash all partitions that you have received from HUE commands are here:
[dont worry if some of theese are not working it's because certains commands are not allowed to use and certains commands are out of date :/ but dont worry the phone will boot correctly after ]
Code:
fastboot flash cache CACHE.img
fastboot flash crc CRC.img
fastboot flash curver CURVER.img
fastboot flash dts DTS.img
fastboot flash efi EFI.img
(i'm not putting erecorery imgs cause we cannot touch them it's an ultimate security from os :) )
fastboot flash fastboot FASTBOOT.img
fastboot flash hifi HIFI.img (only if you are the wifi is not working ;) )
fastboot flash kernel KERNEL.img
fastboot flash modem_fw MODEM_FW.img
fastboot flash modemnvm_update MODEMNVM_UPDATE.img
fastboot flash odm ODM.img
fastboot flash package_type PACKAGE_TYPE.img
fastboot flash product PRODUCT.img
fastboot flash ramdisk RAMDISK.img
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
fastboot flash recovery_vbmeta RECOVERY_VBMETA.img
fastboot flash recovery_vendor RECOVERY_VENDOR.img
fastboot flash sensorhub SENSORHUB.img
fastboot flash system SYSTEM.img
fastboot flash teeos TEEOS.img
fastboot flash trustfirmware TRUSTFIRMWARE.img
fastboot flash vbmeta VBMETA.img
fastboot flash vendor VENDOR.img
fastboot flash verlist VERLIST.img
fastboot flash xloader XLOADER.img
Now you have loader all partitions of an huawei p8 lite 2017 android 8.0 gg !
you just have to make a fastboot reboot to reboot your phone and enjoy !
notes:Everything is working properly after 3 day of use not any missing data some calls bugs but nothing hard
you will loose your TWRP recovery mode AND DO NOT INSTALL ONE OF THEM FOR NOW they are outdated for oreo wait some months (september on some sources)
you will loose all your data and the root (some sites prupose root methods for oreo p8 lite 2017 (and soft root this time :laugh:
idk about the bootloader but i keeped my imei number ^^
Thanks for your time and if anyone got questions i'm still here ^^
RedFiredu29!
btw that my first tutorial tell me if it's good ^^
RedFiredu29 said:
Hello i've made a tutorial on my thread for my solution to unbrick it so if you need to unbrick your phone with a different method
you can use my tutorial it has worked perfecty on my p8 lite 2017 and now he's on oreo
my phone personnaly was totaly broken i flashed some random things on my phone etc this is working 100% cause you are about to clear all the old android system for the new oreo one so for the peoples who got the same problem than me and got stuck
on the fastboot&rescue mode when VOLUME- + POWER for like 5 seconds with the phone off
(for the peoples who can't power off your device you can download the "universal fastboot and ADB tool" app and then click on reboot phone in the fastboot part)
the solution is to :
-Download the rom stock Oreo android 8.0 stechguide.com/huawei-p8-lite-2017-b370-oreo-firmware/
-exctract all files from the HuaweiUpdateExtractor find it on google it's easy just download update.zip
-extract and put the UPDATE.APP in the HuaweiUpdateExtractor
-run srk tool for huawei
-type 000 and press enter
-and now you have to flash all partitions that you have received from HUE commands are here:
[dont worry if some of theese are not working it's because certains commands are not allowed to use and certains commands are out of date :/ but dont worry the phone will boot correctly after ]
Now you have loader all partitions of an huawei p8 lite 2017 android 8.0 gg !
you just have to make a fastboot reboot to reboot your phone and enjoy !
notes:Everything is working properly after 3 day of use not any missing data some calls bugs but nothing hard
you will loose your TWRP recovery mode AND DO NOT INSTALL ONE OF THEM FOR NOW they are outdated for oreo wait some months (september on some sources)
you will loose all your data and the root (some sites prupose root methods for oreo p8 lite 2017 (and soft root this time :laugh:
idk about the bootloader but i keeped my imei number ^^
Thanks for your time and if anyone got questions i'm still here ^^
RedFiredu29!
btw that my first tutorial tell me if it's good ^^
Click to expand...
Click to collapse
That's interesting, never heard of that method!
However there are many good working twrps for oreo, especially the one by Dil3mm4.
MrViking said:
That's interesting, never heard of that method!
However there are many good working twrps for oreo, especially the one by Dil3mm4.
Click to expand...
Click to collapse
Yes i love searching for new solutions on this device but i never heard good unbrick methods for this phone
until our methods ^^
If you read this on XDA labs then please load it in the browser as for some reason lots of text is missing in xda labs.
Thanks ?