Related
Can some developer help me?! I need to restore my ROM to official... How can i do that? Currently using I8190XXAMA1/I8190OXAAMA1_DBT rooted only...
help...! :crying:
thanks,
infected_
infected_ said:
Can some developer help me?! I need to restore my ROM to official... How can i do that? Currently using I8190XXAMA1/I8190OXAAMA1_DBT rooted only...
help...! :crying:
thanks,
infected_
Click to expand...
Click to collapse
Flash stock non rooted ROM.
Sent from my GT-I8190 using xda app-developers app
ppero196 said:
Flash stock non rooted ROM.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
tried that already... i even used pit file to repartition... it stays "custom"... tried my V3 4.1.2 ROM, tried vodafone pt 4.1.1 official an pit file, got a recovery loop, flashed i8190xxama1 dbt official 4.1.2, tried WIPE-I8190, PARAM-I8190, original recovery.tar.. nothing... always "custom"....
i don't know what else to do !!!
infected_ said:
tried that already... i even used pit file to repartition... it stays "custom"... tried my V3 4.1.2 ROM, tried vodafone pt 4.1.1 official an pit file, got a recovery loop, flashed i8190xxama1 dbt official 4.1.2, tried WIPE-I8190, PARAM-I8190, original recovery.tar.. nothing... always "custom"....
i don't know what else to do !!!
Click to expand...
Click to collapse
exactly the same problem I did not care what I do the custom status is I'm trying already are days. 're yesterday I still have the problem
AP: I8190XXAMA1
CP: XXXX <how do I get it back???
CSC: I8190OXAAMA1
sorry my english is not so good
jony1512 said:
exactly the same problem I did not care what I do the custom status is I'm trying already are days. 're yesterday I still have the problem
AP: I8190XXAMA1
CP: XXXX <how do I get it back???
CSC: I8190OXAAMA1
sorry my english is not so good
Click to expand...
Click to collapse
lets see if some developer can help us....
jony1512 said:
exactly the same problem I did not care what I do the custom status is I'm trying already are days. 're yesterday I still have the problem
AP: I8190XXAMA1
CP: XXXX <how do I get it back???
CSC: I8190OXAAMA1
sorry my english is not so good
Click to expand...
Click to collapse
All of the original recovery.tar in this forum are not Samsung signed.........for this reason it is set to Custom.
i think needs to reset to zero the custom binary counter
There is no way
infected_ said:
lets see if some developer can help us....
Click to expand...
Click to collapse
Just wait and see. would definitely good if someone could help
---------- Post added at 05:06 PM ---------- Previous post was at 05:02 PM ----------
cheech01 said:
All of the original recovery.tar in this forum are not Samsung signed.........for this reason it is set to Custom.
Click to expand...
Click to collapse
I've never done before a complete backup of my rom I have the orginal recovery.
yet not I get it out easily
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
I would have never bought samsung I was once stuck with Iphone, I have that now are almost 2 months I have only problem with the ****ing hire.
I know definitely that I'm going to get no more samsung
How can i see if my rom is official or custom?
Sent from my GT-I8190 using xda premium
reboot into download mod
Sn0w0nS said:
How can i see if my rom is official or custom?
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Settings> info to gerat> Status
must then let's see steady since then somewhere device status
how can i reset i8190 custom binary count?
jony1512 said:
Just wait and see. would definitely good if someone could help
---------- Post added at 05:06 PM ---------- Previous post was at 05:02 PM ----------
I've never done before a complete backup of my rom I have the orginal recovery.
yet not I get it out easily
---------- Post added at 05:11 PM ---------- Previous post was at 05:06 PM ----------
I would have never bought samsung I was once stuck with Iphone, I have that now are almost 2 months I have only problem with the ****ing hire.
I know definitely that I'm going to get no more samsung
Click to expand...
Click to collapse
you have open thread with recovery and like you see is not simple like that need some patiance and also some searche and help from other all this is not in 1 minute wait until dev add support to ur device now devloper are discovering how to run ur device is diferant from other galaxy s phone now if you are crying for binary count see here http://forum.xda-developers.com/showthread.php?p=37175660#post37175660 like i explaine above just wait and let time to dev
done... gonna pick it up repaired and with official 4.1.2 rom installed, tomorrow after 09.30 AM.... :fingers-crossed: i don't have resources to recover my device to is normal state... he owns a phone repair shops and knows lots about this stuff... :good:
infected_
jony1512 said:
exactly the same problem I did not care what I do the custom status is I'm trying already are days. 're yesterday I still have the problem
AP: I8190XXAMA1
CP: XXXX <how do I get it back???
CSC: I8190OXAAMA1
sorry my english is not so good
Click to expand...
Click to collapse
Exactly the same issue here. CP: XXXX But my phone is working no issues other than that one.
Benzonat0r said:
Exactly the same issue here. CP: XXXX But my phone is working no issues other than that one.
Click to expand...
Click to collapse
my cell phone only works this is not standard so
I don't care cause warranty covers factory defects anyway and nothing else. So if anything was gonna go wrong with my phone it would've gone wrong by now.
So all of this is due to custom recovery etc?
Ps, Binary count has nothing to do with the firmware status.
You can have 100 binary counts but if you never messed with custom recoverys,bad param.lfs files etc your device will remain Official.
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
jony1512 said:
my cell phone only works this is not standard so
Click to expand...
Click to collapse
You can make calls with the phone?
faria said:
So all of this is due to custom recovery etc?
Ps, Binary count has nothing to do with the firmware status.
You can have 100 binary counts but if you never messed with custom recoverys,bad param.lfs files etc your device will remain Official.
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
You can make calls with the phone?
Click to expand...
Click to collapse
dear faria,
as u know im facing with same problem. i use param.lfs to wake up my device. you said "messed with custom recoverys,bad param.lfs files..." can u share a good param.lfs for us...
Benzonat0r said:
I don't care cause warranty covers factory defects anyway and nothing else. So if anything was gonna go wrong with my phone it would've gone wrong by now.
Click to expand...
Click to collapse
who told you that...? has far i know, samsung devices with rooted and modified rom's aren't covered by warranty !!
Anyone know if there is a root method for the new verson of the note 4 yet? The N910T3? :laugh:
There is. Just odin team win recovery and flash this rom.
http://forum.xda-developers.com/showthread.php?t=3176500
Android_Monsters said:
There is. Just odin team win recovery and flash this rom.
http://forum.xda-developers.com/showthread.php?t=3176500
Click to expand...
Click to collapse
Do you know which file the flash there were two of them there. The first file says it's our ron but it says it's unrooted
It's the 2nd one that gives you root. TekHD just gave it a fancy name.
---------- Post added at 04:52 AM ---------- Previous post was at 04:52 AM ----------
It's still your rom.
Karakoram2 said:
It's the 2nd one that gives you root. TekHD just gave it a fancy name.
---------- Post added at 04:52 AM ---------- Previous post was at 04:52 AM ----------
It's still your rom.
Click to expand...
Click to collapse
The screen shot showed it was the N910TTMB1COG2 not the N910T3UVU1DOG1 rom so its confusing
re: DOG1
cwwjr1681 said:
The screen shot showed it was the N910TTMB1COG2 not the N910T3UVU1DOG1 rom so its confusing
Click to expand...
Click to collapse
That's what it's supposed to show,
It's due to the Tmobile N910T3 DOG1 modem would only work on an actual T3 device.
@TEKHD said that except for that, it's 100% T3 DOG1.
People who actually have a Note 4 N910T3 device don't have the display issue at all.
...On a lighter note, so far I have not seen anyone posting anything having to do with new
features and user options in the T3 DOG1 firmware, if it had any I am almost certain that
someone would have already mentioned it here. (not counting removing stagefright )
Good luck and have a great day!
Yes I can confirm flashing TEKXvirgin_N4_URv0_Gift_Edition works on N910T3 with baseband N910T3UVU1DOG1. I guess the warning "YOU MUST BE ON COG2 BASEBAND FOR A FLAWLESS EXPERIENCE" is only meant for flashing N910T
As usual xda members ... This is stock PF1 MM firmware .. If you simply want to restore back to stock for any reason or wanting to update .. enjoy!
AP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ft00m2pm369f40i/G920AUCS4CPF1_MM.zip?dl=0
JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware .. If you simply want to restore back to stock for any reason or wanting to update .. enjoy!
AP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ft00m2pm369f40i/G920AUCS4CPF1_MM.zip?dl=0
Click to expand...
Click to collapse
hello! i want to add mode language at this firmware....
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
loustu said:
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
Click to expand...
Click to collapse
What do you mean is not the correct file?
loustu said:
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
Click to expand...
Click to collapse
I went back to the link and see you upadated the file. I will try again and follow up.
loustu said:
I went back to the link and see you upadated the file. I will try again and follow up.
Click to expand...
Click to collapse
Alright they are working links and i just double check..
JUSMEJOSE said:
What do you mean is not the correct file?
Click to expand...
Click to collapse
Once the file finished downloading, I extracted and the file is titled G890AUCU4CPF1_MM.zip.
loustu said:
Once the file finished downloading, I extracted and the file is titled G890AUCU4CPF1_MM.zip.
Click to expand...
Click to collapse
Weird .. but on my side ..
JUSMEJOSE said:
Weird .. but on my side ..
Click to expand...
Click to collapse
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
Click to expand...
Click to collapse
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
Click to expand...
Click to collapse
I guess it took a little while to load, but all files are there. Flashing now.
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
I guess it took a little while to load, but all files are there. Flashing now.
Click to expand...
Click to collapse
everything good so far?
w_thenujaya said:
everything good so far?
Click to expand...
Click to collapse
Success!! Going through setup now.
loustu said:
Success!! Going through setup now.
Click to expand...
Click to collapse
Ok,please tell us later if the peformance is good and other stuff
Sent from my Andromax I56D2G using Tapatalk
Would you happen to have CPG1? That's the version I currently have..
w_thenujaya said:
Ok,please tell us later if the peformance is good and other stuff
Sent from my Andromax I56D2G using Tapatalk
Click to expand...
Click to collapse
Everything seems to be working just fine. Performance is excellent, signal is great. Battery life is better than it was on Lollipop.
Thanks for the rom!
General_Mayhem said:
Would you happen to have CPG1? That's the version I currently have..
Click to expand...
Click to collapse
Yes i do .. But it will be uploaded sometime this week because im uploading MM for other devices ...
loustu said:
Everything seems to be working just fine. Performance is excellent, signal is great. Battery life is better than it was on Lollipop.
Click to expand...
Click to collapse
Are all data got wiped after the update?
Sent from my Andromax I56D2G using Tapatalk
Yes, I used Samsung Smart switch to backup and then restore.
loustu said:
Yes, I used Samsung Smart switch to backup and then restore.
Click to expand...
Click to collapse
Even updating fro PD6 the data got wipe?
Sent from my Andromax I56D2G using Tapatalk
Flashed it,and so far so good!
Sent from my Andromax I56D2G using Tapatalk
For this people who can't update via OTA.
Full ODIN stock At&t G920AUCS6DQC1 Files
This are ADB sideloads files.
G920AUCS6DQC1 to U6EQCF - Official Nougat 7.0 update with April 1 security.
Also if someone is on unoficial U5EQB8 Nougat i have file U5EQB8 to U6EQCF
Hey Norbarb, have any links for the S6 Edge?
troyboytn said:
Hey Norbarb, have any links for the S6 Edge?
Click to expand...
Click to collapse
Yes i post it in Edge forum : https://forum.xda-developers.com/att-galaxy-s6-edge/general/eqc9-build-nougat-adb-links-t3582693
Norbarb. It keeps saying vannot read file. Help me. I have done it before but stuck this time
---------- Post added at 03:14 PM ---------- Previous post was at 03:12 PM ----------
If u can give me the odin files that would more helpful if u have or tell me when they will b available ni really go to nougat
Cannot read coming i tried laa.exe too. No help please help me i really wanna go.to nouvattt
Beasty2215 said:
Cannot read coming i tried laa.exe too. No help please help me i really wanna go.to nouvattt
Click to expand...
Click to collapse
there is so many things could be wrong, PC, cable, phone, adb installed twice , PC not able to read larger files in CMD.. search google for answers. There is to early to get ODIN files for 7.0 for S6. You need to wait week or so.
BTW i will not look for any more any files for S6 since people do not even care to click "Thank You" . I will not waste my time for something i'm not even appreciated for. I DON'T have S6 so i have no idea why i'm doing this. BYE
Im new to this i dnt know how to say thanku hinestly
---------- Post added at 12:08 PM ---------- Previous post was at 12:07 PM ----------
I liked ur posts. How to say thanks?
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
Norbabrb im aorry its nt like i dnt appreciate u idk about otheres. But yeah i really like it when u help. Please help bro?
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
I searched google. But i dnt get any help .please help me please
---------- Post added at 12:13 PM ---------- Previous post was at 12:11 PM ----------
And tell me im using same cable same adb. My adb is reading other files smaller and about 200mb file. But not reading this. Can u tell me how to do this please?
Hey norbarb thNks for the link. Worked.it out on another device
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
gst_r said:
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
Click to expand...
Click to collapse
Yes you can
gst_r said:
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
Click to expand...
Click to collapse
Nop. First u have to update via odin to qc1 firnwRe then the last adb. Odin nougat file not released yet
I installed the unofficial build a while back, but it says I'm on 'U5EQA8' not 'U5EQB8'. Can I sideload the update here or should I just format and upgrade w odin
TheNightman said:
I installed the unofficial build a while back, but it says I'm on 'U5EQA8' not 'U5EQB8'. Can I sideload the update here or should I just format and upgrade w odin
Click to expand...
Click to collapse
You need to odin to EQC1 then update to official by adb sideload.
Complete nougat files for odin?
cesarsuarez said:
Complete nougat files for odin?
Click to expand...
Click to collapse
Not realised yet.
On Edge of Galaxy
Hi Norb,
Im done with below, but when I login to samsung account error appear "invalid id or pass".. But I can login thru web.
This is because nougat won't need gmail to login? My phone reactivation is currently on.
When i finished the update, then it will go to welcome screen-login wifi-samsung account.. no more gmail login page. Please help
norbarb said:
For this people who can't update via OTA.
Full ODIN stock At&t G920AUCS6DQC1 Files
This are ADB sideloads files.
G920AUCS6DQC1 to U6EQCF - Official Nougat 7.0 update with April 1 security.
Also if someone is on unoficial U5EQB8 Nougat i have file U5EQB8 to U6EQCF
Click to expand...
Click to collapse
jrosea said:
Hi Norb,
Im done with below, but when I login to samsung account error appear "invalid id or pass".. But I can login thru web.
This is because nougat won't need gmail to login? My phone reactivation is currently on.
When i finished the update, then it will go to welcome screen-login wifi-samsung account.. no more gmail login page. Please help
Click to expand...
Click to collapse
I don't have s6. I think this was discussed already.
On Edge of Galaxy
norbarb said:
Yes you can
Click to expand...
Click to collapse
can you update directly from 5.02 directly to 7.0?
pierre3408 said:
can you update directly from 5.02 directly to 7.0?
Click to expand...
Click to collapse
Yes. You can ODIN from 5.0.2 to 7
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
https://www.androidfilehost.com/?fid=674106145207493788
JUSMEJOSE said:
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
Click to expand...
Click to collapse
If i have the baseband G935AUCU4BQD4 can i still use this flash?
deleted
thank you!
I am on initial Oreo beta, can I flash this directly using Odin?
vineet381 said:
I am on initial Oreo beta, can I flash this directly using Odin?
Click to expand...
Click to collapse
Yes sir
juni12 said:
Yes sir
Click to expand...
Click to collapse
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
vineet381 said:
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
Click to expand...
Click to collapse
No
Can I Flash this to G935U.
Hamza khAnz said:
Can I Flash this to G935U.
Click to expand...
Click to collapse
Yes
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
jrkruse said:
Yes
Click to expand...
Click to collapse
Hello people
i have S7 Edge G935A working on nugat 7.0
buildnummber : NRD90M.G935AUCU4BQA6
my problem is when i want to turn wifi on i must turn airplan mode on first...
is there any sulotion
and i didnt receive any ota update till now to solve this problem......
Anyone? Hoping to do this today!
JWhipple said:
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
Click to expand...
Click to collapse
JWhipple said:
Anyone? Hoping to do this today!
Click to expand...
Click to collapse
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
jrkruse said:
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
Click to expand...
Click to collapse
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
MichaelJCarr2302 said:
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
Click to expand...
Click to collapse
That's the same boat I was in - worked without a hitch!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
This little morsel of information should probably get added to the OP. I was in the same boat having flashed from 935A to 935U on Odin 3.12.7 (as was recommended for that process) and then tried to use the same version to go from 935U to 935A (Oreo). When that process failed, I went deeper into the thread and found this. Pulled a copy and it worked like a champ, but if we could add this info to the top post, it would be helpful.
--C#
JWhipple said:
That's the same boat I was in - worked without a hitch!
Click to expand...
Click to collapse
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
MichaelJCarr2302 said:
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
Click to expand...
Click to collapse
Correct, assuming you're using the version of Odin above