Database Develop

Update From 4.4.2 to 5.0

HI
I recently bought a S5 G900A and i have been looking to find a way to upgrade it to 5.0 and of course i am not in the US
I looked over the internet and forums but didn't found anything familiar
Just some guides TO UPDATE to 5.0 but they need minimum software version 4.4.4
I have been looking to find all ota files but can't locate them , was only able to locate NCE_to_NG3 & NG3_tA1 update files
Below attached is a screenshot of my device About Info
Can anyone please guide me how i can make it possible , how can i update to 5.0

its.hamz said:
HI
I recently bought a S5 G900A and i have been looking to find a way to upgrade it to 5.0 and of course i am not in the US
I looked over the internet and forums but didn't found anything familiar
Just some guides TO UPDATE to 5.0 but they need minimum software version 4.4.4
I have been looking to find all ota files but can't locate them , was only able to locate NCE_to_NG3 & NG3_tA1 update files
Below attached is a screenshot of my device About Info
Can anyone please guide me how i can make it possible , how can i update to 5.0
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3076803
Hope that helps you out.

dirtydodge said:
http://forum.xda-developers.com/showthread.php?t=3076803
Hope that helps you out.
Click to expand...
Click to collapse
Thanks but there is nothing mentioned if it will update 4.4.2 directly to 5.0 but still i'll give it a try downloading rom
Thanks
Will let you know about the result

its.hamz said:
Thanks but there is nothing mentioned if it will update 4.4.2 directly to 5.0 but still i'll give it a try downloading rom
Thanks
Will let you know about the result
Click to expand...
Click to collapse
You must be rooted in order to use the flash fire. If your not already rooted you will need to download towelroot.com. download and install it. If it says your version is not supported then you'll need to downgrade to nce and then root. Then you'll be able to use flash fire to flash the stock rooted rom that i posted earlier.
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
The info you'll need is in the OP of that thread. Hollar if you need help and I'll help as much as i can

dirtydodge said:
You must be rooted in order to use the flash fire. If your not already rooted you will need to download towelroot.com. download and install it. If it says your version is not supported then you'll need to downgrade to nce and then root. Then you'll be able to use flash fire to flash the stock rooted rom that i posted earlier.
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
The info you'll need is in the OP of that thread. Hollar if you need help and I'll help as much as i can
Click to expand...
Click to collapse
Thanks a Lot Bro , it worked

its.hamz said:
Thanks a Lot Bro , it worked
Click to expand...
Click to collapse
Good deal.

//SM-G890A\\ **Stock Firmware G890AUCU4CPF1**

As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
AP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
BL_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CSC_ATT_G890AATT4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ysvmpb3p61vdeq7/G890AUCU4CPF1_MM.zip?dl=0

Downloading now! Will update once flashed.

loustu said:
Downloading now! Will update once flashed.
Click to expand...
Click to collapse
Let me know .. enjoy!

i downloaded the file and place it on my adb folder and i also copied the exact name of the file i did shift right click and went into command i put
adb sideload G890AUCU4CPF1_MM or G890AUCU4CPF1_MM.zip but i kept getting cannot read what am i doing wrong?

Chillin2323 said:
i downloaded the file and place it on my adb folder and i also copied the exact name of the file i did shift right click and went into command i put
adb sideload G890AUCU4CPF1_MM or G890AUCU4CPF1_MM.zip but i kept getting cannot read what am i doing wrong?
Click to expand...
Click to collapse
You need to extract it and use Odin

JUSMEJOSE said:
You need to extract it and use Odin
Click to expand...
Click to collapse
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
---------- Post added at 05:11 PM ---------- Previous post was at 04:32 PM ----------
Chillin2323 said:
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
Click to expand...
Click to collapse
okay so used odin and flashed it on and got a final pass successful but its stuck on the boot logo

Chillin2323 said:
let me try that i have been trying all morning to get marshmellow but no luck let me try that and il let you know if successful
---------- Post added at 05:11 PM ---------- Previous post was at 04:32 PM ----------
okay so used odin and flashed it on and got a final pass successful but its stuck on the boot logo
Click to expand...
Click to collapse
boot might take 5-10 minutes i noticed that on my side ...

JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
https://www.dropbox.com/s/ysvmpb3p61vdeq7/G890AUCU4CPF1_MM.zip?dl=0
Click to expand...
Click to collapse
Thank you so much! Downloading now...!
P.S. If you manage to find the latest G890AUCS4CPF3, please shout.

g890a 6.0.1
bro the link doesn't work anymore do you have any other link please

Yeah, throws a 429 error. Can someone upload to Mega?

Can anyone get the latest firmware for G890a and G891A. PI3 Please?

Link please

thank you

Re upload
Can someone reupload this firmware version please? Want to update to nougat. Thanks
---------- Post added at 01:18 AM ---------- Previous post was at 01:11 AM ----------
And is it possible to root the g920a? Been wanting to install titanium

its on easy firmware .. let me download it & upload it somewhere
G890AUCU6DQD1_7.0_4File_USA (AT&T).7z

link caido
JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware ... Enjoy!
AP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
BL_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CP_G890AUCU4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
CSC_ATT_G890AATT4CPF1_CL8347181_QB9920104_REV02_user_low_ship.tar.md5
el link para la descarga del firmware esta caido amigo. lo puede restaurar?
Click to expand...
Click to collapse

AT&T S6 Edge - July 2017's Latest Security Update - G925AUCS6EQG1

Greetings to all the fine members of the XDA community, specially to norbarb!!, I noticed that AT&T released the latest security patch (July 2017), based on Android 7.0.1.
Can someone please post either the full Odin firmware or the ADB incremental update?? The update brings the AT&T S6 Edge to version G925AUCS6EQG1.
Thanking you in advance for your kind support.

Noslen4Ever said:
Greetings to all the fine members of the XDA community, specially to norbarb!!, I noticed that AT&T released the latest security patch (July 2017), based on Android 7.0.1.
Can someone please post either the full Odin firmware or the ADB incremental update?? The update brings the AT&T S6 Edge to version G925AUCS6EQG1.
Thanking you in advance for your kind support.
Click to expand...
Click to collapse
I will upload ADB files later today.
On Edge of Galaxy

Thanks Norbarb! you totally rock!!
norbarb said:
I will upload ADB files later today.
On Edge of Galaxy
Click to expand...
Click to collapse
Awesome!, thank you for your continuous contributions to the community, Norbarb!

hi, where can i find the files???

saicharit04 said:
hi, where can i find the files???
Click to expand...
Click to collapse
https://forum.xda-developers.com/at...al/eqc9-build-nougat-adb-links-t3582693/page7

norbarb said:
I will upload ADB files later today.
On Edge of Galaxy
Click to expand...
Click to collapse
@norbarb, could you please do the same for G920A (non-edge)? It will mean the world to me since I am abroad and can't update via OTA!
Thank you for everything you do for the community!
Cheers!

benzino90 said:
@norbarb, could you please do the same for G920A (non-edge)? It will mean the world to me since I am abroad and can't update via OTA!
Thank you for everything you do for the community!
Cheers!
Click to expand...
Click to collapse
I was doin this for regural g920a but seems like people do not appreciate what I done for them in G920A forum so I quit. So I will not waste my my time on people who can't even press "thank you" button.
On Edge of Galaxy

benzino90 said:
@norbarb, could you please do the same for G920A (non-edge)? It will mean the world to me since I am abroad and can't update via OTA!
Thank you for everything you do for the community!
Cheers!
Click to expand...
Click to collapse
You got PM's
Thanks.

norbarb said:
You got PM's
Thanks.
Click to expand...
Click to collapse
I really appreciate all the effort you put into helping us!
I wish more people will show their appreciation and won't take you'r help for granted!
Thank you for being such an awesome person!
Cheers!

how to install G925AUCS6EQG1 ?
how to install G925AUCS6EQG1 ? I download this file 22.1 mb but idont know how to install..sorry for my bad english

Arbri [email protected] said:
how to install G925AUCS6EQG1 ? I download this file 22.1 mb but idont know how to install..sorry for my bad english
Click to expand...
Click to collapse
Your English is just fine. Search for ADB sideload on YouTube.
On Edge of Galaxy

I installed before with adb but this is zip file not work :/
---------- Post added at 10:04 PM ---------- Previous post was at 09:26 PM ----------
loading: G925AUCS6EQF-to-S6EQG1
*canot read G925AUCS6EQF-to-S6EQG1

Arbri [email protected] said:
I installed before with adb but this is zip file not work :/
---------- Post added at 10:04 PM ---------- Previous post was at 09:26 PM ----------
loading: G925AUCS6EQF-to-S6EQG1
*canot read G925AUCS6EQF-to-S6EQG1
Click to expand...
Click to collapse
What is your build now?
On Edge of Galaxy
---------- Post added at 05:24 PM ---------- Previous post was at 05:20 PM ----------
Arbri [email protected] said:
I installed before with adb but this is zip file not work :/
---------- Post added at 10:04 PM ---------- Previous post was at 09:26 PM ----------
loading: G925AUCS6EQF-to-S6EQG1
*canot read G925AUCS6EQF-to-S6EQG1
Click to expand...
Click to collapse
You got typo. You missing 1 at end 6EQF. Command should be adb sideload G925AUCS6EQF1-to-S6EQG1.zip
On Edge of Galaxy

my build is EQCF
---------- Post added at 10:41 PM ---------- Previous post was at 10:34 PM ----------
again same problem :/
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
[IMG=":"]http://Upload on directupload.net
I have just uploaded these images:
http://www.directupload.net/file/d/4806/fo5fxp2v_jpg.htm[/IMG]

Arbri [email protected] said:
my build is EQCF
---------- Post added at 10:41 PM ---------- Previous post was at 10:34 PM ----------
again same problem :/
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
[IMG=":"]http://Upload on directupload.net
I have just uploaded these images:
http://www.directupload.net/file/d/4806/fo5fxp2v_jpg.htm[/IMG]
Click to expand...
Click to collapse
You going to need some more files then from here :
http://forum.xda-developers.com/showthread.php?t=3582693
You need to ADB sideload files CF to E1 then E1 to F1 and then F1 to G1. You can't go directly because this are updates from specific build to specific build.
This are last 2 symbols of builds.
On Edge of Galaxy

I test with CF to E1 again same problem :/

Arbri [email protected] said:
I test with CF to E1 again same problem :/
Click to expand...
Click to collapse
Ok. In CMD you need to switch to your ADB folder and updates needs to be in root of ADB.
On picture looks like you want to start ADB from System32 folder. This will not work at all. Search on YouTube and read more how to use ADB sideload to be more familiar with whole process.
Good luck.
On Edge of Galaxy

SM-G935AUCS4BRC1/BRD1_Odin_Factory_Firmware_With_CRE4_Oreo _Update

G935AUCS4BRD1 Firmware
ODIN FIRMWARE
G935AUCS4BRD1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRD1-to-U4CRE4-UP.zip
Flash G935AUCS4BRD1 with above odin
Place SS-G935AUCS4BRD1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
G935AUCS4BRC1 Firmware
ODIN FIRMWARE
G935AUCS4BRC1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Flash G935AUCS4BRC1 with above odin
Place SS-G935AUCS4BRC1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
Odin Patche 3.13
Odin3_v3.13.1_3B_PatcheD.zip
THANKS
@FatalONEM8 For Update zips

Thread title
Should be SM-G935AUCS4BRC1

bzzybfrm313 said:
Should be SM-G935AUCS4BRC1
Click to expand...
Click to collapse
Thanks man

So if I download the update zip and install it with the SD card will it be back to a stable build and official?

arilion315 said:
So if I download the update zip and install it with the SD card will it be back to a stable build and official?
Click to expand...
Click to collapse
That's the official build

Ok so I don't need odin or any custom recovery to install it through the SD card correct?

Is this for the s7 or s7 edge? because I have an s7 and it aborted the installation.

arilion315 said:
Is this for the s7 or s7 edge? because I have an s7 and it aborted the installation.
Click to expand...
Click to collapse
It's for the s7 Edge

bzzybfrm313 said:
It's for the s7 Edge
Click to expand...
Click to collapse
ok it aborted the update and said something about finger prints? I'm confused.

Will this work to get my phone off of G935U then onto stock and then to Oreo?

Aaron78 said:
Will this work to get my phone off of G935U then onto stock and then to Oreo?
Click to expand...
Click to collapse
Yes

This is what I was talking about

Can I flash this on G935AUCU4BQD4?

arilion315 said:
This is what I was talking about
Click to expand...
Click to collapse
Ah....didn't you say it's an s7 and not the s7 edge?
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
tjizzle said:
Can I flash this on G935AUCU4BQD4?
Click to expand...
Click to collapse
I don't think so...has to be BRC1

bzzybfrm313 said:
Ah....didn't you say it's an s7 and not the s7 edge?
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
I don't think so...has to be BRC1
Click to expand...
Click to collapse
No I have the s7 edge.

If I'm on G935AUCS4BRA1 can I use the update.zip?

jrkruse said:
G935AUCS4BRD1 Firmware
ODIN FIRMWARE
G935AUCS4BRD1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRD1-to-U4CRE4-UP.zip
Flash G935AUCS4BRD1 with above odin
Place SS-G935AUCS4BRD1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
Click to expand...
Click to collapse
Where is the update zip file for BRD1 to U4CRE4-UP? Its gone off of Android File Host?

Aaron78 said:
Where is the update zip file for BRD1 to U4CRE4-UP? Its gone off of Android File Host?
Click to expand...
Click to collapse
I fixed it recheck OP and refresh page

My phone is on the G935U. It was already answered that it can be used to go back to AT&T version and update to Oreo. My question is... Will it delete all my data?
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
bzzybfrm313 said:
Yes
Click to expand...
Click to collapse
Aaron78 said:
Will this work to get my phone off of G935U then onto stock and then to Oreo?
Click to expand...
Click to collapse
Did you try the update already? Like you, I had flashed the G935U on the AT&T S7 Edge. Were you able to do it without deleting your data?

Danny1976 said:
My phone is on the G935U. It was already answered that it can be used to go back to AT&T version and update to Oreo. My question is... Will it delete all my data?
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
Did you try the update already? Like you I had flashed theG935U on the AT&T S7 Edge. Were you able to do it without deleting your data?
Click to expand...
Click to collapse
I'm pretty sure that your data will be deleted

//SM-G935A\\ **Stock Oreo Odin G935AATT4CRE4**

Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
https://www.androidfilehost.com/?fid=674106145207493788

JUSMEJOSE said:
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
Click to expand...
Click to collapse
If i have the baseband G935AUCU4BQD4 can i still use this flash?

deleted

thank you!

I am on initial Oreo beta, can I flash this directly using Odin?

vineet381 said:
I am on initial Oreo beta, can I flash this directly using Odin?
Click to expand...
Click to collapse
Yes sir

juni12 said:
Yes sir
Click to expand...
Click to collapse
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?

vineet381 said:
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
Click to expand...
Click to collapse
No

Can I Flash this to G935U.

Hamza khAnz said:
Can I Flash this to G935U.
Click to expand...
Click to collapse
Yes

What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]

jrkruse said:
Yes
Click to expand...
Click to collapse
Hello people
i have S7 Edge G935A working on nugat 7.0
buildnummber : NRD90M.G935AUCU4BQA6
my problem is when i want to turn wifi on i must turn airplan mode on first...
is there any sulotion
and i didnt receive any ota update till now to solve this problem......

Anyone? Hoping to do this today!
JWhipple said:
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
Click to expand...
Click to collapse

JWhipple said:
Anyone? Hoping to do this today!
Click to expand...
Click to collapse
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806

jrkruse said:
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
Click to expand...
Click to collapse
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!

JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?

MichaelJCarr2302 said:
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
Click to expand...
Click to collapse
That's the same boat I was in - worked without a hitch!

JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
This little morsel of information should probably get added to the OP. I was in the same boat having flashed from 935A to 935U on Odin 3.12.7 (as was recommended for that process) and then tried to use the same version to go from 935U to 935A (Oreo). When that process failed, I went deeper into the thread and found this. Pulled a copy and it worked like a champ, but if we could add this info to the top post, it would be helpful.
--C#

JWhipple said:
That's the same boat I was in - worked without a hitch!
Click to expand...
Click to collapse
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?

MichaelJCarr2302 said:
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
Click to expand...
Click to collapse
Correct, assuming you're using the version of Odin above