SM-G935AUCS4BRC1/BRD1_Odin_Factory_Firmware_With_CRE4_Oreo _Update - AT&T Samsung Galaxy S7 Edge Guides, News, & Discus

G935AUCS4BRD1 Firmware
ODIN FIRMWARE
G935AUCS4BRD1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRD1-to-U4CRE4-UP.zip
Flash G935AUCS4BRD1 with above odin
Place SS-G935AUCS4BRD1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
G935AUCS4BRC1 Firmware
ODIN FIRMWARE
G935AUCS4BRC1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Flash G935AUCS4BRC1 with above odin
Place SS-G935AUCS4BRC1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
Odin Patche 3.13
Odin3_v3.13.1_3B_PatcheD.zip
THANKS
@FatalONEM8 For Update zips

Thread title
Should be SM-G935AUCS4BRC1

bzzybfrm313 said:
Should be SM-G935AUCS4BRC1
Click to expand...
Click to collapse
Thanks man

So if I download the update zip and install it with the SD card will it be back to a stable build and official?

arilion315 said:
So if I download the update zip and install it with the SD card will it be back to a stable build and official?
Click to expand...
Click to collapse
That's the official build

Ok so I don't need odin or any custom recovery to install it through the SD card correct?

Is this for the s7 or s7 edge? because I have an s7 and it aborted the installation.

arilion315 said:
Is this for the s7 or s7 edge? because I have an s7 and it aborted the installation.
Click to expand...
Click to collapse
It's for the s7 Edge

bzzybfrm313 said:
It's for the s7 Edge
Click to expand...
Click to collapse
ok it aborted the update and said something about finger prints? I'm confused.

Will this work to get my phone off of G935U then onto stock and then to Oreo?

Aaron78 said:
Will this work to get my phone off of G935U then onto stock and then to Oreo?
Click to expand...
Click to collapse
Yes

This is what I was talking about

Can I flash this on G935AUCU4BQD4?

arilion315 said:
This is what I was talking about
Click to expand...
Click to collapse
Ah....didn't you say it's an s7 and not the s7 edge?
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
tjizzle said:
Can I flash this on G935AUCU4BQD4?
Click to expand...
Click to collapse
I don't think so...has to be BRC1

bzzybfrm313 said:
Ah....didn't you say it's an s7 and not the s7 edge?
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
I don't think so...has to be BRC1
Click to expand...
Click to collapse
No I have the s7 edge.

If I'm on G935AUCS4BRA1 can I use the update.zip?

jrkruse said:
G935AUCS4BRD1 Firmware
ODIN FIRMWARE
G935AUCS4BRD1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G935AUCS4BRD1-to-U4CRE4-UP.zip
Flash G935AUCS4BRD1 with above odin
Place SS-G935AUCS4BRD1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
Click to expand...
Click to collapse
Where is the update zip file for BRD1 to U4CRE4-UP? Its gone off of Android File Host?

Aaron78 said:
Where is the update zip file for BRD1 to U4CRE4-UP? Its gone off of Android File Host?
Click to expand...
Click to collapse
I fixed it recheck OP and refresh page

My phone is on the G935U. It was already answered that it can be used to go back to AT&T version and update to Oreo. My question is... Will it delete all my data?
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
bzzybfrm313 said:
Yes
Click to expand...
Click to collapse
Aaron78 said:
Will this work to get my phone off of G935U then onto stock and then to Oreo?
Click to expand...
Click to collapse
Did you try the update already? Like you, I had flashed the G935U on the AT&T S7 Edge. Were you able to do it without deleting your data?

Danny1976 said:
My phone is on the G935U. It was already answered that it can be used to go back to AT&T version and update to Oreo. My question is... Will it delete all my data?
---------- Post added at 10:33 PM ---------- Previous post was at 10:26 PM ----------
Did you try the update already? Like you I had flashed theG935U on the AT&T S7 Edge. Were you able to do it without deleting your data?
Click to expand...
Click to collapse
I'm pretty sure that your data will be deleted

Related

4.4.1 Bootloader & Radio (Flashable)

I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
MD5: 807f95b809df0630668e10d3ed029306
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
MD5: 32b70505615d22cf0c9e86507e114f44
Are they necessary for updating toe 4.1.1 (custom rom), or just a nice bonus?
Bonus
DubelBoom said:
Are they necessary for updating toe 4.1.1 (custom rom), or just a nice bonus?
Click to expand...
Click to collapse
I usually do to avoid potential issue with custom roms and enjoy the benefits of any bugfixes and battery savings of the new baseband.
NoobieExtraordinare said:
I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
Click to expand...
Click to collapse
Excellent thanks! flash in recovery I assume?
If I flash a boot loader through recovery, will it start as unlocked then I assume? Sorry that's a pretty noobish question.
NoobieExtraordinare said:
I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
Click to expand...
Click to collapse
and these two files will work with the US models of the Nexus 5 correct?
I have d821, it's the same file or not?
vomer said:
Excellent thanks! flash in recovery I assume?
Click to expand...
Click to collapse
Yup, flash away. I did!
Hooya said:
If I flash a boot loader through recovery, will it start as unlocked then I assume? Sorry that's a pretty noobish question.
Click to expand...
Click to collapse
Yes, I'm using Cataclysm ROM with Franco's kernel and both these and the HDR+ Camera worked just fine.
sushi829 said:
and these two files will work with the US models of the Nexus 5 correct?
Click to expand...
Click to collapse
Will work with US and EU models from what I gathered.
safendi said:
I have d821, it's the same file or not?
Click to expand...
Click to collapse
Yes it is, I have the D821.
how do i confirm these two files were flashed correctly after flashing both files in TWRP?
Can i flash it and also use catalysm 4.4 without problems?
Gesendet von meinem Nexus 5 mit Tapatalk
can someone provide a mirror? i can't access links from work or from my Nexus 5.
Trying to flash the bootloader fails.. "file_getprop: failed to stat "/system/build.........." "E:Error executing updater binary in zip....................."
Flashing it in TWRP.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
@NoobieExtraordinare Any idea?
---------- Post added at 09:02 PM ---------- Previous post was at 08:55 PM ----------
Nvm, wasnt on any 4.4.1 rom so couldnt flash for some reason.
tuffCookie said:
can someone provide a mirror? i can't access links from work or from my Nexus 5.
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=2557523
nerotix said:
Trying to flash the bootloader fails.. "file_getprop: failed to stat "/system/build.........." "E:Error executing updater binary in zip....................."
Flashing it in TWRP.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
@NoobieExtraordinare Any idea?
---------- Post added at 09:02 PM ---------- Previous post was at 08:55 PM ----------
Nvm, wasnt on any 4.4.1 rom so couldnt flash for some reason.
Click to expand...
Click to collapse
Seems to be flashing fine. Corrupt download? I don't believe you have to be on a 4.4.1 rom to flash the bootloader.
Ever since updating to 4.4.1 I've had full bars for network signal strength, but terrible speeds. Tried re-flashing the radio only. No improvement seen. Is there a way to roll back the radio only, or re-flash the old radio (via TWRP)?
Had someone flashed the bootloader on D820?
EDIT:
I did. Worked
Thanks!
Is Bootloader flash necessary?
Inviato dal mio Nexus 5
DubelBoom said:
Had someone flashed the bootloader on D820?
EDIT:
I did. Worked
Thanks!
Click to expand...
Click to collapse
Can someone post a zip because It won't let me download.
Sent from my Nexus 5 using Tapatalk
I second that please add zips so it can be done on phone without computer
Sent from my Nexus 5 using Tapatalk 2
Guys it is a zip file! That's how it's viewed from mobile. Open the link and use your browser to select "Use Desktop Mode" Now on the top left, click Download. It will download the full zips. Don't you see (flashable) in the thread title?
Downloaded & flashed just fine from my N5

n9208 battry-how to update n9208

hi
sorry for my bad eng
Note 5 I sleep mode , 1 hour=4.5 OR 5% Discharge
In normal use there is no problem!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ONLY IN SLEEP
My rom is N9208XXU2APC3
how to fix?????
-----------------------------------------------------------------------
i flash N9208ZZT2BPD2 from odin
NAND Write Start
cm.bin
FAIL !
how to fix and flash android 6.0.1?????????????????????????????????????????????
helpppppppppppppppppppppppppppppppppppppp
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
factory reset your phone.
as far as I know, there is no marshmallow for n9208 yet
loveinfire said:
helpppppppppppppppppppppppppppppppppppppp
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
Do you have a Taiwan or a Malaysian variant?
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
kelok622 said:
factory reset your phone.
as far as I know, there is no marshmallow for n9208 yet
Click to expand...
Click to collapse
there is...i am on stock MM from samsung
anmolkakkar said:
Do you have a Taiwan or a Malaysian variant?
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
there is...i am on stock MM from samsung
Click to expand...
Click to collapse
not for malaysian variant
kelok622 said:
not for malaysian variant
Click to expand...
Click to collapse
So the reason i asked in my first question that is it Taiwan or Malaysian. Since Taiwan MM ROM is out and is not compatible with Malaysian variant and hence the Malaysian Variant N9208 people have to wait till Samsung releases MM for them.
i also experienced that.. i just flashed super su zip on custom recovery to fix the deep sleep issue
sniperyong said:
i also experienced that.. i just flashed super su zip on custom recovery to fix the deep sleep issue
Click to expand...
Click to collapse
how to root??????????????????
http://forum.xda-developers.com/note5/general/guide-how-to-root-sm-n9208-t3214659/page24 not work to me
i flash twrp 3.0.2.0 and flash supersu 4,65
but not boot!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
no kerenl for me???????
SM-N9208_SEA--kernel-SkyHigh_TW_v4.5--[16-02-19] not work
cf not work
help
https://ph.search.yahoo.com/yhs/mob...TA-SuperSU-v2.67-20160121175247&type=APN11955
try this super su..
please wipe cache and dalvik first then flash zip on twrp
sniperyong said:
https://ph.search.yahoo.com/yhs/mob...TA-SuperSU-v2.67-20160121175247&type=APN11955
try this super su..
please wipe cache and dalvik first then flash zip on twrp
Click to expand...
Click to collapse
i flsh from twrp but bootloop
not boot
loveinfire said:
i flsh from twrp but bootloop
not boot
Click to expand...
Click to collapse
plz
help me
how to root
loveinfire said:
i flsh from twrp but bootloop
not boot
Click to expand...
Click to collapse
read the the HOW TO ROOT SM-N9208 thread.
One fellow shared us a working TWRP 3.0.0.0.
I am having bootloop with the ones that I used last time but that one is working flawlessly.

//SM-G920A\\ **Stock Firmware G920AUCS4CPF1**

As usual xda members ... This is stock PF1 MM firmware .. If you simply want to restore back to stock for any reason or wanting to update .. enjoy!
AP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ft00m2pm369f40i/G920AUCS4CPF1_MM.zip?dl=0
JUSMEJOSE said:
As usual xda members ... This is stock PF1 MM firmware .. If you simply want to restore back to stock for any reason or wanting to update .. enjoy!
AP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPF1_CL7368506_QB9796065_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ft00m2pm369f40i/G920AUCS4CPF1_MM.zip?dl=0
Click to expand...
Click to collapse
hello! i want to add mode language at this firmware....
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
loustu said:
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
Click to expand...
Click to collapse
What do you mean is not the correct file?
loustu said:
The zip file I downloaded from the link ended up being an G890AUCU4CPF1_MM.zip file. I try to flash a couple of times, and was getting a Secure check fail : (PIT) error. I was not paying attention at first then I took a second look and realized it was not the correct file.
Click to expand...
Click to collapse
I went back to the link and see you upadated the file. I will try again and follow up.
loustu said:
I went back to the link and see you upadated the file. I will try again and follow up.
Click to expand...
Click to collapse
Alright they are working links and i just double check..
JUSMEJOSE said:
What do you mean is not the correct file?
Click to expand...
Click to collapse
Once the file finished downloading, I extracted and the file is titled G890AUCU4CPF1_MM.zip.
loustu said:
Once the file finished downloading, I extracted and the file is titled G890AUCU4CPF1_MM.zip.
Click to expand...
Click to collapse
Weird .. but on my side ..
JUSMEJOSE said:
Weird .. but on my side ..
Click to expand...
Click to collapse
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
Click to expand...
Click to collapse
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
Click to expand...
Click to collapse
I guess it took a little while to load, but all files are there. Flashing now.
loustu said:
File just finished downloading and its titled G920AUCS4CPF1_MM.zip. Seems to be the correct one now. I'm going to give it a go.
---------- Post added at 01:16 AM ---------- Previous post was at 01:13 AM ----------
I just extracted the file and it is only a single AP file. Should that be all? There is not an CP, CSC, or BL file.
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
I guess it took a little while to load, but all files are there. Flashing now.
Click to expand...
Click to collapse
everything good so far?
w_thenujaya said:
everything good so far?
Click to expand...
Click to collapse
Success!! Going through setup now.
loustu said:
Success!! Going through setup now.
Click to expand...
Click to collapse
Ok,please tell us later if the peformance is good and other stuff
Sent from my Andromax I56D2G using Tapatalk
Would you happen to have CPG1? That's the version I currently have..
w_thenujaya said:
Ok,please tell us later if the peformance is good and other stuff
Sent from my Andromax I56D2G using Tapatalk
Click to expand...
Click to collapse
Everything seems to be working just fine. Performance is excellent, signal is great. Battery life is better than it was on Lollipop.
Thanks for the rom!
General_Mayhem said:
Would you happen to have CPG1? That's the version I currently have..
Click to expand...
Click to collapse
Yes i do .. But it will be uploaded sometime this week because im uploading MM for other devices ...
loustu said:
Everything seems to be working just fine. Performance is excellent, signal is great. Battery life is better than it was on Lollipop.
Click to expand...
Click to collapse
Are all data got wiped after the update?
Sent from my Andromax I56D2G using Tapatalk
Yes, I used Samsung Smart switch to backup and then restore.
loustu said:
Yes, I used Samsung Smart switch to backup and then restore.
Click to expand...
Click to collapse
Even updating fro PD6 the data got wipe?
Sent from my Andromax I56D2G using Tapatalk
Flashed it,and so far so good!
Sent from my Andromax I56D2G using Tapatalk

ADB Official updates all the way to Nougat

For this people who can't update via OTA.
Full ODIN stock At&t G920AUCS6DQC1 Files
This are ADB sideloads files.
G920AUCS6DQC1 to U6EQCF - Official Nougat 7.0 update with April 1 security.
Also if someone is on unoficial U5EQB8 Nougat i have file U5EQB8 to U6EQCF
Hey Norbarb, have any links for the S6 Edge?
troyboytn said:
Hey Norbarb, have any links for the S6 Edge?
Click to expand...
Click to collapse
Yes i post it in Edge forum : https://forum.xda-developers.com/att-galaxy-s6-edge/general/eqc9-build-nougat-adb-links-t3582693
Norbarb. It keeps saying vannot read file. Help me. I have done it before but stuck this time
---------- Post added at 03:14 PM ---------- Previous post was at 03:12 PM ----------
If u can give me the odin files that would more helpful if u have or tell me when they will b available ni really go to nougat
Cannot read coming i tried laa.exe too. No help please help me i really wanna go.to nouvattt
Beasty2215 said:
Cannot read coming i tried laa.exe too. No help please help me i really wanna go.to nouvattt
Click to expand...
Click to collapse
there is so many things could be wrong, PC, cable, phone, adb installed twice , PC not able to read larger files in CMD.. search google for answers. There is to early to get ODIN files for 7.0 for S6. You need to wait week or so.
BTW i will not look for any more any files for S6 since people do not even care to click "Thank You" . I will not waste my time for something i'm not even appreciated for. I DON'T have S6 so i have no idea why i'm doing this. BYE
Im new to this i dnt know how to say thanku hinestly
---------- Post added at 12:08 PM ---------- Previous post was at 12:07 PM ----------
I liked ur posts. How to say thanks?
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
Norbabrb im aorry its nt like i dnt appreciate u idk about otheres. But yeah i really like it when u help. Please help bro?
---------- Post added at 12:11 PM ---------- Previous post was at 12:09 PM ----------
I searched google. But i dnt get any help .please help me please
---------- Post added at 12:13 PM ---------- Previous post was at 12:11 PM ----------
And tell me im using same cable same adb. My adb is reading other files smaller and about 200mb file. But not reading this. Can u tell me how to do this please?
Hey norbarb thNks for the link. Worked.it out on another device
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
gst_r said:
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
Click to expand...
Click to collapse
Yes you can
gst_r said:
thanks, I am on 6.0.1 PJ1, Can I update directly to nougat via ODIN with your files? I am using a G920A from AT&T, Thanks in advance!
Click to expand...
Click to collapse
Nop. First u have to update via odin to qc1 firnwRe then the last adb. Odin nougat file not released yet
I installed the unofficial build a while back, but it says I'm on 'U5EQA8' not 'U5EQB8'. Can I sideload the update here or should I just format and upgrade w odin
TheNightman said:
I installed the unofficial build a while back, but it says I'm on 'U5EQA8' not 'U5EQB8'. Can I sideload the update here or should I just format and upgrade w odin
Click to expand...
Click to collapse
You need to odin to EQC1 then update to official by adb sideload.
Complete nougat files for odin?
cesarsuarez said:
Complete nougat files for odin?
Click to expand...
Click to collapse
Not realised yet.
On Edge of Galaxy
Hi Norb,
Im done with below, but when I login to samsung account error appear "invalid id or pass".. But I can login thru web.
This is because nougat won't need gmail to login? My phone reactivation is currently on.
When i finished the update, then it will go to welcome screen-login wifi-samsung account.. no more gmail login page. Please help
norbarb said:
For this people who can't update via OTA.
Full ODIN stock At&t G920AUCS6DQC1 Files
This are ADB sideloads files.
G920AUCS6DQC1 to U6EQCF - Official Nougat 7.0 update with April 1 security.
Also if someone is on unoficial U5EQB8 Nougat i have file U5EQB8 to U6EQCF
Click to expand...
Click to collapse
jrosea said:
Hi Norb,
Im done with below, but when I login to samsung account error appear "invalid id or pass".. But I can login thru web.
This is because nougat won't need gmail to login? My phone reactivation is currently on.
When i finished the update, then it will go to welcome screen-login wifi-samsung account.. no more gmail login page. Please help
Click to expand...
Click to collapse
I don't have s6. I think this was discussed already.
On Edge of Galaxy
norbarb said:
Yes you can
Click to expand...
Click to collapse
can you update directly from 5.02 directly to 7.0?
pierre3408 said:
can you update directly from 5.02 directly to 7.0?
Click to expand...
Click to collapse
Yes. You can ODIN from 5.0.2 to 7

//SM-G935A\\ **Stock Oreo Odin G935AATT4CRE4**

Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
https://www.androidfilehost.com/?fid=674106145207493788
JUSMEJOSE said:
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
Click to expand...
Click to collapse
If i have the baseband G935AUCU4BQD4 can i still use this flash?
deleted
thank you!
I am on initial Oreo beta, can I flash this directly using Odin?
vineet381 said:
I am on initial Oreo beta, can I flash this directly using Odin?
Click to expand...
Click to collapse
Yes sir
juni12 said:
Yes sir
Click to expand...
Click to collapse
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
vineet381 said:
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
Click to expand...
Click to collapse
No
Can I Flash this to G935U.
Hamza khAnz said:
Can I Flash this to G935U.
Click to expand...
Click to collapse
Yes
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
jrkruse said:
Yes
Click to expand...
Click to collapse
Hello people
i have S7 Edge G935A working on nugat 7.0
buildnummber : NRD90M.G935AUCU4BQA6
my problem is when i want to turn wifi on i must turn airplan mode on first...
is there any sulotion
and i didnt receive any ota update till now to solve this problem......
Anyone? Hoping to do this today!
JWhipple said:
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
Click to expand...
Click to collapse
JWhipple said:
Anyone? Hoping to do this today!
Click to expand...
Click to collapse
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
jrkruse said:
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
Click to expand...
Click to collapse
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
MichaelJCarr2302 said:
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
Click to expand...
Click to collapse
That's the same boat I was in - worked without a hitch!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
This little morsel of information should probably get added to the OP. I was in the same boat having flashed from 935A to 935U on Odin 3.12.7 (as was recommended for that process) and then tried to use the same version to go from 935U to 935A (Oreo). When that process failed, I went deeper into the thread and found this. Pulled a copy and it worked like a champ, but if we could add this info to the top post, it would be helpful.
--C#
JWhipple said:
That's the same boat I was in - worked without a hitch!
Click to expand...
Click to collapse
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
MichaelJCarr2302 said:
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
Click to expand...
Click to collapse
Correct, assuming you're using the version of Odin above

Categories

Resources