I am a total beginner with Tasker...
I bought Tasker so I made a task: when the phone rings for an incoming call to be the maximum screen brightness. After that, go back to the auto-brightness.
Of course, I fail
Can you help me?
Profile 1.
State= phone = call incoming.
Task display auto brightness to off.
Next
Display= display brightness set to the level you want.
Phone = end call.
Display = auto brightness on.
Haven't test it. Try and tell me if works
Sent from my Nexus 5 using Tapatalk
Thank You very much.
Works great. But only the first two task: -State= phone = call incoming.
Task display auto brightness to off.
Next
Display= display brightness set to the level you want.
The rest I threw because it rejected incoming call.
After the call, brightness auto set to level before call.
Related
anyone managed to stop vibration on Phone in profile?
I have 2 profile,
Home - Wifi Toggle On, 2G only, all application group's application Vibration to off
Default - Wifi Toggle Off, 2G|3G, all application group's application Vibration on
When profile set to Home, all other application's notification does not vibrate. However the phone still vibrates on incoming calls. Any insights?
I'm having an issue with priority notifications affecting ring state.
Switching between vibrate and full ring volume will turn off priority notifications if they are set on (time limit, indefinitely, and through moto assist). Switching priority notifications on or off will turn the ringer back on if on vibrate. Is there any way to fix this? It seems like priority notifications should not affect ring state. I would test it on another phone, but I don't know anyone who has lollipop.
Moto X 2014 - sleep mode on dowtime allows only vibrate for priority interruptions
After the 5.1 update my moto assist, as expected, puts my phone in sleep mode at the downtime, timmings of which I have pre-defined.
I have chosen to allow only priority interruptions during that time.
However, the priority interruptions are vibrate only by default at the start of the downtime. Which I don't want. I want the priority interruptions to have max volume by default. And it was working just like that before. And I do not remeber making any settings changes. An I can't find how to set a default volume for priority interruptions.
Thanks for help in advance.
rohitrusty314 said:
After the 5.1 update my moto assist, as expected, puts my phone in sleep mode at the downtime, timmings of which I have pre-defined.
I have chosen to allow only priority interruptions during that time.
However, the priority interruptions are vibrate only by default at the start of the downtime. Which I don't want. I want the priority interruptions to have max volume by default. And it was working just like that before. And I do not remeber making any settings changes. An I can't find how to set a default volume for priority interruptions.
Thanks for help in advance.
Click to expand...
Click to collapse
In 5.1 the settings for interruptions are independent from Motorola sleep mode and they work together, you have to go to settings/sound and notifications/interruptions. There you can choose the priorities of the notifications. Hope this is what your looking for.
Thank you but not quite what I was looking for.
juliospinoza said:
In 5.1 the settings for interruptions are independent from Motorola sleep mode and they work together, you have to go to settings/sound and notifications/interruptions. There you can choose the priorities of the notifications. Hope this is what your looking for.
Click to expand...
Click to collapse
I have doen necessary settings according to my understanding. But the problem I am facing here is, allow me to explain,
In moto>Moto Assist>Sleeping I have set a downtime as 11pm to 5am (next day)
Allowing only priority interruptions,
At 11 pm, My phone goes to Sleep Mode as expected.
Alowing only priority interruptions, as expected.
However the problem here is, the volume for priority interruptions is only vibrate. But I want it to have maximum volume.
If I use the Interrruptions downtime settings of lollipop. It works as expected. However, it would be nice to get moto assist be able to do that. Thanks for your response earlier. And any further help.
I have a profile in Tasker that is supposed to set the phone to silent mode when I have a meeting scheduled. It works fine, has always done, until I got the OnePlus. The OnePlus has its built in system of Ring mode, DND mode and Silent mode which are triggered by the three step hardware switch on the side of the phone.
What happens is that when my "In a meeting"-profile triggers (and my phones hardware trigger is set to Ring), Tasker tries to set the volume to 0 but since the Ring mode prevents it the volume only goes down to 1 (out of 7 steps).
Someone tipped me of an app called "Sound Profile +volume schedule" which actually managed to change the volume to 0 in my phone when I applied the apps "silent" profile!
I however am not that clever at this (yet) that I can figure out what this app called on to make this happen.
But I'm counting on that some of you smart guys and girls here might know!
Thank you!
EDIT:
I have no ****ing idea how I suddenly got this to work but here it is. A silent profile in Tasker while slider is set to ring mode.
Volume is 0% and not 15% as it has been for a while for me. The ****er just suddenly gave in and works!
https://drive.google.com/folderview?id=0B6O1zb-OcKDmU2xUV21HMVlfM3c
rage77 said:
I have a profile in Tasker that is supposed to set the phone to silent mode when I have a meeting scheduled. It works fine, has always done, until I got the OnePlus. The OnePlus has its built in system of Ring mode, DND mode and Silent mode which are triggered by the three step hardware switch on the side of the phone.
What happens is that when my "In a meeting"-profile triggers (and my phones hardware trigger is set to Ring), Tasker tries to set the volume to 0 but since the Ring mode prevents it the volume only goes down to 1 (out of 7 steps).
Someone tipped me of an app called "Sound Profile +volume schedule" which actually managed to change the volume to 0 in my phone when I applied the apps "silent" profile!
I however am not that clever at this (yet) that I can figure out what this app called on to make this happen.
But I'm counting on that some of you smart guys and girls here might know!
Thank you!
Click to expand...
Click to collapse
This is a few days old so maybe you've moved on. There are apps that will capture intents, maybe that is a way to find out what the Sound Profile +volume schedule app is doing. Then you could send the same intent through tasker. Else, instead of lowering the volume a workaround might be to switch the ringtone to silent. Then there is always AutoTools.
I have no ****ing idea how I suddenly got this to work but here it is. A silent profile in Tasker while slider is set to ring mode.
Volume is 0% and not 15% as it has been for a while for me. The ****er just suddenly gave in and works.
https://drive.google.com/folderview?id=0B6O1zb-OcKDmU2xUV21HMVlfM3c
Hi.
sometimes (at least once a day) it happens to find the volume of notifications at 0. The volume of calls, system and multimedia are ok, that of notifications is set by itself to zero.
do you have any suggestions on what it might be?
Do you have any automation turned on? (Bixby Routines)
I use DnD during the night, but it is set like the other phone