[Ubuntu] Won't boot after battery died - Xperia Z1 Q&A, Help & Troubleshooting

Hi, I recently flashed the new Ubuntu Touch image for the Xperia Z1 without any issues, but then my battery died after a few days of no usage and I can't get the phone to boot, nor can I get it into fastboot or recovery: When I put it on charge, first the notification-LED starts blinking red, then after a few minutes it begins starting up to charging mode (battery icon). Pressing any volume buttons while the Sony logo shows doesn't help, and after that the phone begins totally bugging around. I can't get it to boot to Ubuntu, but I also can't get it to turn back off without waiting until the battery drains, and then I'm back at plugging it in again. I also tried hitting buttons while plugging in the USB-cable, but again, no results.
Any suggestions? Thanks in advance.

Related

+ [Solution] Empty 0% battery bootloop on 4.3 Xperia T

I still didn't get my OTA in Croatia so I decided to try this. I came across an issue which wasn't present in official 4.1.2. and maybe someone had (and still has) it as well. I'm posting this here so that it's easier to find if anyone has this issue and wants to fix it.
I have installed 4.3 on my Xperia T with Locked Bootloader and everything worked fine. However, I have come across a issue and managed to solve it as well. Here's what happened and how I solved it, maybe it helps someone with same problem.
Today my battery drained to 0% and the phone shut down. Now when I plug it in to wall socket to charge, red LED goes on and it turns the phone on. Once Android boots I can see 0% in status bar and it starts shutting down again. Then it boots up again and loops like that. I remember that on 4.1.2. there would be a battery icon when it was completely empty and it wouldn't boot the system. Now it just loops. This didn't happen on official 4.1.2.
I have Googled for solutions and have tried this.
"1. Press and hold down the power key on the right side of the phone. If the battery status LED flashes red, try plugging the charger into the phone at the same time as you are pressing and holding in the power key.
When plugging the charger into the phone there is a risk that nothing happens – no red battery status LED as indication of charging, or nothing appearing on the screen.
If the charging doesn’t start, follow the instructions under To let the charger be plugged in for 24 hours.
2. If the charging starts, keep charging the phone until it’s fully charged. Indication of charging is that the battery status LED lights up in red, or that the SONY symbol appears on the screen and then the LED lights up."
Problem was that when I left it to charge (screen off, LED red) it would start booting again after a few minutes. When it started to boot, I would press volume up + power key to shut it down and keep charging. I had to do this many times (10 to 15) and it was very frustrating but it worked in the end. I decided to let it boot and voilà! it showed 1% battery and didn't start shutting down. Now it's charged to 2% and keeps on charging.
The lesson - don't EVER let your Xperia discharge below 1%, you'll have a world of problems.
I have the exact same problem, except that it doesn't even charge when my screen is off.
Great find! I used a separate way to get it to charge but I can assure you it gave me a world of pain! Thank you for sharing
What about the Xposed module DisableCriticalBatteryShutdown?
If or devices were no longer turning off again after booting when battery is 0%, the problem would be fixed, right?
Sent from my LT25i using xda app-developers app

Endless boot cycle, don't know if it's power or OS issue

I looked in the previous threads about non-booting but no one I could find had my issue. Bought the Nook HD+ about 4 months ago and rooted it and installed Android (not sure which version but cm11). Out of the blue, last week I pulled it out of my bag and the battery % was flipping between 1% and 31%, so I put some stuff on it via USB and then shut it down to charge. I plugged it in overnight and tried turning it on in the morning. All I was getting was the low battery picture, so I kept trying to charge it, but it wasn't charging, the power light would go to orange when I plugged it in, thena fter 3-5 seconds it would flip green and then turn off and retry. My assumption is the battery is dead, but it could be a corrupted OS now as I got it to charge long enough to get to the CM11 boot menu. But I even went out and bought a new charger and converter to rule that out and it still is stuck in the same boot sequence. I obviously can NOT charge this thing while it is off because of it's reboot loop, it can't charge. I'm not quite sure what is going on or whether it is a battery or boot issue but after I leave it for a big it freezes on the cyan picture (which is frozen on some scrambled version of it) until I turn it off.
I can't power it on enough to charge it to rule out the battery, I tried holding the power and n button for 3 seconds, letting go of the power, and then pressing it again to get into the recovery menu, but that isn't working either. And I prepared another SD card for a second flash for a corrupted OS and that didn't seem to work either.
I'm stuck here and I'm not sure what to do now to get it running again. I don't care about the data on my tablet at the moment.
Try plugging it into a PC USB port over night.
Sent from my SPH-L900 using XDA Free mobile app
That's what I did that got it charged enough to get to try to boot, where it now shuts down. But now as it tries to boot it reboots, maybe from too much power consumption? I only had it plugged in for half hour or hour before that got it charged to the point where it boots to the logo screen. I have a feeling it is not charging because every reboot the light turns off (orange light stays on for like 5 seconds)
I will plug it in to my PC and charge it overnight and let you know what happens. It's interesting, I plug it in now and the orange charge light comes on, shows the Nook screen, then shows the low battery screen and shuts off, then the orange light turns off, but it remains plugged in... not sure if it is still charging but as I said, I will leave it overnight and see what that gets me.
No success. I can turn it on and the charging lights turns on for 5 seconds and shows the nook screen, then goes black and shows the low battery screen, then immediately shuts off and the charging light turns off and it no longer charges.
Any other suggestions? I can't seem to do anything with the Nook now.

XSP won't charge or boot

Hi
I am stuck with a phone that won't boot, charge, or be detected by flashtool (or windows) and will not boot in flashmode/fastboot either.
I had plugged in the phone for charging when the battery was considerably low ~ 5-10% before I went to sleep. I remember the red LED glowing, meaning the phone must've been charging.
The next morning I check the phone, the LED was STILL red and the handset was kind of dead - no response at all, whatsoever. Even the reset button on the bacl panel doesn't work (no vibration).
The phone was running BlissPop (5.1.1) with Tangerine kernel.
Now when I plug in the phone for charging, nothing happens at all, not even the red LED. The LED does glow red for as long as I press and hold the power button while it is plugged in (both PC and wall outlet)
I took it to the service center; they say they'll have to change the motherboard. Obviously the phone is not in warranty and there is no way I can pay 10,000 INR that Sony is demanding for the job.
Someone somewhere in the forums suggested allowing the battery to drain completely, but I don't think my battery is holding any charge.
Can anyone help me out?
Thanks
msainani said:
Hi
Can anyone help me out?
Thanks
Click to expand...
Click to collapse
1. Press and hold the reset button for 8 seconds and check if it vibrates. Now plug in charger as there is a possibility that phone is not booting because of insufficient charge.
2. Charge for atleast 20 min without switching on phone.
3. Make sure flashtool is installed properly and so as drivers.
4. Flash Stock ftf
If the above didnt work then try Fastboot mode and simply flash Tangerine kernel.
If nothing works, then its an hardware issue and there is no point in spending 10k in repairing.
Get yourself a brand new Moto G or yureka.
http://forum.xda-developers.com/showthread.php?t=2717303 <- this guy had a pretty similar problem and managed to fix it
I was following the steps he provided: i plugged the phone to PC and held the power button pressed. Surprisingly the PC did recognize the phone after a while- but it was only momentarily and the red LED also stopped glowing. Unfortunately I haven't been able to reproduce a similar situation after that.
bump!

[Q] Strange (hard?) brick

Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Qba_S said:
Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Click to expand...
Click to collapse
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
tilakpatel22 said:
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
Click to expand...
Click to collapse
Thanks for the info! I've ordered a replacement battery already.
I'll open my phone today and measure all voltages. I'll keep you updated.
Good luck
tilakpatel22 said:
Good luck
Click to expand...
Click to collapse
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Qba_S said:
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Click to expand...
Click to collapse
no problem

my phone stop responding sudden death Z3+ e6533

I have Xperia Z3+ dual E6533 that was on custom ROM working fine for almost 4 months.
suddenly after installing Xposed framework second day while on ultra stamina mode once I try to deactivate it and go back to normal it goes into boot loop.
once I turn off the phone and let it charge to 100% tried again to boot but still the same so I left the phone for a couple of hours to be cool down after around 15 min boot loop.
suddenly it's not responding anymore for any key combination or hard reset or reflash.
I tried hard reset by the small button next to sim card slot, by (Power & Volume +), by removing the battery and reinstall it again.
now the computer does not recognize the phone at all and cannot go in flash mode or fastboot mode.
I tried also holding the volume- before connecting the phone and holding it until connecting to PC but nothing showing in device manager.
now all that is coming that once it's connected to wall charger it's blinking red for 2 days now and while pressing the power button the blinking red light turns into stable one not blinking.
I have already read most of the similar issues written for other devices and tried most of them but still nothing.
can anyone help me?

Categories

Resources