hello
i have note5 920c
my phone is root and recovery...
i flash custom rom with twrp ( custom note7) and every things is good but after restart my phone bootloop on samsung logo and on logo write : Custom Binary block by FRP lock
i tried to flash stock rom by odin.... but not flash this rom(stock 6.0.1 )... and error odin.. after flash my phone dont turn off and stay on : an error occurred while
updating the device software
use the emergency recovery function
in the smart switch pc software
on this error write : sw check fail device 1 binary 0
how can fix this problem ? may solve it ba samsung box ? zx3 ?
you can flash the latest stock rom for N920C
Uhm...i faced similar issue. You left oem unlock disabled, which is wrong.
First book into stock recovery, wipe data/factory reset. Wipe everything wipable, then go to download mode. Flash 5.1 stock. If it doesn't work, repeat the wiping, then flash 6.0. Good luck
yesterday i have flashed twrp recovery to my lenovo a7000 and rooted the phone ..
but bt worng i 've wiped every think via twrp recovery ..
then i tried to power up the phone then i still stuck at the boot logo .
then i tried to flash the stock rom via sp flash tool but it didn't work because when i connect the phone to the usb cable " while the power off " it starts and stock at the boot logo again ..
i still have the twrp recovery on phone but i can't flash the stock rom . what shuld i do ?
mohamed khaled OK said:
yesterday i have flashed twrp recovery to my lenovo a7000 and rooted the phone ..
but bt worng i 've wiped every think via twrp recovery ..
then i tried to power up the phone then i still stuck at the boot logo .
then i tried to flash the stock rom via sp flash tool but it didn't work because when i connect the phone to the usb cable " while the power off " it starts and stock at the boot logo again ..
i still have the twrp recovery on phone but i can't flash the stock rom . what shuld i do ?
Click to expand...
Click to collapse
Flash a custom ROM using twrp.first download the ROM in PC or another mobile which has sd card. Then copy that ROM using ADB push commands or just insert a memory card with Rom in it. Then instll through TWRP
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
dude , first thing to remember;
even if your os is completely gone and recovery option is still working , then don't ever do these stupid things.
I've been in your place . But i always knows that if your recovery is still working then there's 99.9% you can fix it.but it seems like you've ruined everything with other flash tools. Dude , unlike every phones, k3 note has it's own k3 note manager software available in xda forums. You can download twrp backups here . Lenovo stock rom backup was here, only you have to do is download and place it on the correct folder. Then press restore!!!
But you ruined everything. I don't know if it turn on again. You came here after all of this and asking us to help now? I
install a custom rom after installing the stockrom (which got error7 during install)
after u get error7 when installing the firmware,,you wont have any os for the phone to boot.
just flash someother custom rom after u got that error.. phone will boot up.
Please compare whether all files of the stockrom you downloaded are extracted,i got error 7,and when i investigated the reason was that one of the file inside the rar file was not extracted.which inturn caused error during instalation
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
i hv facing same issue try every think bt nothing is work thn i hv flash my phone sp flash with original stock rom and when i flash i untk recovery option bcoz in 89 percent i got error than aftr untk it successfully flash and when i start i only show twrp thn i reconnect my phone to pc and untck all in stock rom only tck recovery and successfully flash recover and restart my mobile....... and boom its work nw i very happy
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
hows your phone?? alive??
Hey!I have a serious problem with my phone and I really need some help
My phone was running Android 8.1 (Custom ROM) before someone cracked the screen of my phone.After that i leave the phone to a service for repair.All good since i take it back.After i went to home i do a factory reset and guess what...bootloop.I tried to flash other ROM ( I was using TWRP 3.2) but smae results...I tried to flash other version of TWRP ,but when i typed in adb fastboot boot (recovery image name).iso the phone still remains in FASTBOOT and nothing happened.
Finally I saw that an older version of TWRP was workig (cofface TWRP recovery) and i flashed the original ROM (MIUI) wich was working
Now I want to know what they did to my phone.Why i can't flash any other recovery or Custom ROMs...What can I do?
I really need some help
Hello i am using mi a2 , with a custom rom miui ( didnt turn my phone to wayne) , and i wanna revert back to stock android q and relock the bootloader. Any guide or any help will be much apreciated
s'n'v said:
Hello i am using mi a2 , with a custom rom miui ( didnt turn my phone to wayne) , and i wanna revert back to stock android q and relock the bootloader. Any guide or any help will be much apreciated
Click to expand...
Click to collapse
just download twrp flashable stock .zip for jasmine. Flash with recovery like any rom. Afterwards *enable* oem unlock and adb permissions... connect to pc via cable ...reboot to recovery ..if you still have twrp flash stock recovery ...
if you have stock recovery ..enter fastboot mode and use to lock bootloader
alternatively download a stock fastboot image amd flash it using Miflash
*just use a tutorial
* i suggested using first option because this option sometimes causes a soft brick if you use the wrong options