[Q] GT-I8200N boots in Android system recovery <3e> mode (bricked?) - Galaxy S III Mini Q&A, Help & Troubleshooting

Hi.
I've been given a bricked(?) SIII galaxy mini, which boots into Android system recovery <3e> mode.
I'm trying to revive it, but I'm not having much luck.
I have tried the following:
-wipe data/factory reset
-wipe cache partition
-enable download mode and flash using various odin versions.
-changed usb cables
-use different pc's windows 10/7/vista
-reinstall usb drivers
-start odin elavated
Odin does recognize the phone (<ID:0/004> Added!!)
But flashing fails
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8200NXXUAOL1_I8200NVDPAOD1_I8200NXXUAPB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> timh.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> obm.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Any suggestions ?

*bump*

Anyone ? Could anything be done using ADB ? The phone is not rooted.

Do your solve your problem?I am also having same problem. http://forum.xda-developers.com/showpost.php?p=68542525&postcount=2270

Related

need help fast..

i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Kenannp said:
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Try other USB port. Let me known if it works.
Force said:
Try other USB port. Let me known if it works.
Click to expand...
Click to collapse
did try... even tried on other pc but still same problem... went to buddy to repair it in service shop... he said that something is wrong with usb on the phone... so i left it there to get fixed. thx tho

Samsung SM-G870A ATT Stuck in Downloading Mode - need help please

Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius

Modem.bin fail in odin when trying to restore to 4.1.2

Recently I installed Clockwork Mod on my sisters Samasung Galaxy I8190N and attempted to flash lollipop on it. Much to my disappointment somewhere in the process I failed. Now when the phone boots I see the lollipop loading animation, but it goes no further during the boot. I can no longer access the Clockwork Mod recovery with up+power+home button. But can still access the download mode. So I tried to reinstall the 4.1.2 using odin, however with odin I get the following error when trying to flash using the PDA/AP:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone (in download mode) it says Custom Modem Binary installed.
Any help in getting my sisters phone back to how it was before she gave it to me (default 4.1.2) would be greatly appreciated!
Edit: I realise after posting that this would of been better in the troubleshooting forum, apologies for that.
Factory reset or flash original firmware from sammobile

S5 Active (G870A) stuck at AT&T logo

I was having issues with the WiFi on my phone so I made backups to the SD card, removed it and did a factory reset on the phone. I'm not sure what it was running at the time, but not lolipop. It now boots to AT&T logo and heats up until I pull the battery out (I've waited upwards of 30 mins). I tried flashing stock and 0F3 roms with odin and I get the error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone it says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
I've tried flashing with PIT, tried flashing the boot loader, G870AUCU1ANE4_Full_Odin, and G870A_OC5_Bootloader, to no avail. I also downloaded Samsung Kies 3 and tried to do Firmware upgrade and initialization, which also didn't work. It comes up to Firmeware emergency recovery and asks for a recovery code (which I don't have). I've also tried from recovery mode to factory data reset and also tried to flash the roms from external SD. Is there anything else I can try or something I am missing that can get this working? Any help would be greatly appreciated.

TWRP wipe and deleted /system haven't been able to get past system.img in odin HELPP

I have a sprint galaxy note 5. I accidently formatted in twrp. Since then its' stuck here ( NOTE: I WAS ON 5.1.1 AND I'M TRYING TO FLASH 6.0.1 I HAVE THE 6.0 TWRP THAT IS REQUIRED)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
Click to expand...
Click to collapse
Anyone have any ideas at all? I have no way to get a replacement until next week so I'm gonna do what I can to get this working. Any additional info can be provided
what I've tried:
different ROM ( could be using the wrong one)
N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5
N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5
ALL_SPT_N920PVPU2BPC3_N920PSPT2BPC3_CL7231607_QB8832851_REV00_user_low_ship.tar.md5
all of these have the same problem. I am starting with a clean phone pretty much. system 0 bytes data 0 bytes
I have noticed that /system won't mount in TWRP when trying to repair the directory possibly this has something to do with it
Any advice at all is welcome. I have no clue where to go from here
EDIT: Just tried a new usb port and it worked after 7 hours of trying over and over
I would try to get my hands on an updated stock rom bundled with boot image and kernel and try that with odin. Also be sure you are using the right Odin.

Categories

Resources