Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
enolaN_Fr said:
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
Click to expand...
Click to collapse
You don't need to flash hidden.img.
Remove it from the firmware then flash again.
Well done, thanks for your help!
Related
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070JVBMD1_I9070OJVBMD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> hidden.img.md5
<ID:0/009> __XmitData_Read ..
<ID:0/009> XmitData Fail..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that's what i got when i'm trying to flash stock jb 4.1.2 :/
it's not the first time that i flash stock jb
edit: solved by flashing custom recovery by odin then reflash stock GB
Hi, i recently got the SM-G900A from AT&T and the firmware corrupted. It was running stock lollipop with the build number G900AUCU4BOF3. At first i was on a screen where it said for me to "Connect to Kies and select Emergency Recover" or something, but my phone isn't supported nor does it show up on Kies. I have tried every stock version i could find to try and downgrade my build number if possible, but it would always fail in Odin.
Also, in Recovery Mode it shows a completely different build number: G900AUCU1ANCE
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The thing i don't really get is why it let me flash "system.img.tar" and it won't flash a full stock rom without the output above.. Any help would be greatly appreciated! If possible, can someone dump their stock rom?
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Stiria said:
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Click to expand...
Click to collapse
Did you contact the dev?
I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.
Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz
It was the stock firmware, wrong version, I cry today.
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk