Bricked from resurrectionmix, please help - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks

Stiria said:
I was using resurrectionremix, and bluetooth/lte wasn't working so well so I decided to factory reset it and install the stock factory image.
But when I try to flash using Odin (3.07, 3.09 tried both) it gives me this error.
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone
UDC START
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC write fail : ABOOT
And the firmwares I tried are
NIH, NK4, COD
MTP Isn't working, the phone isn't recognizing my microSD card either so there's no way for me to flash anything through zip TWRP.
Can somebody help me out? Thanks
Click to expand...
Click to collapse
Did you contact the dev?

Related

I have a problem with odin ?! help !

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070JVBMD1_I9070OJVBMD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> hidden.img.md5
<ID:0/009> __XmitData_Read ..
<ID:0/009> XmitData Fail..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that's what i got when i'm trying to flash stock jb 4.1.2 :/
it's not the first time that i flash stock jb
edit: solved by flashing custom recovery by odin then reflash stock GB

SM-G900A firmware corrupted

Hi, i recently got the SM-G900A from AT&T and the firmware corrupted. It was running stock lollipop with the build number G900AUCU4BOF3. At first i was on a screen where it said for me to "Connect to Kies and select Emergency Recover" or something, but my phone isn't supported nor does it show up on Kies. I have tried every stock version i could find to try and downgrade my build number if possible, but it would always fail in Odin.
Also, in Recovery Mode it shows a completely different build number: G900AUCU1ANCE
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The thing i don't really get is why it let me flash "system.img.tar" and it won't flash a full stock rom without the output above.. Any help would be greatly appreciated! If possible, can someone dump their stock rom?

[T715] Flash FAIL!

Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
enolaN_Fr said:
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
Click to expand...
Click to collapse
You don't need to flash hidden.img.
Remove it from the firmware then flash again.
Well done, thanks for your help!

Help can't flash anything to TMobile Note 5

I'm trying to go back to stock and i've tried every which way. When I try to do it through Odin it fails. I've tried on every USB port I have.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried through Smart Switch and it says its a Galaxy Edge 7 so it doesn't let me do the emergency restore.
Then I tried to flash any other room though TWRP and it just says failed and give Error 7.
Any help will be appreciated.
You need to download the correct firmware for your device

Note 5 (SM-N920V) fails at modem.bin when flashing with Odin

New to using Odin, Note 5 crashed and try to fix it by flashing with Odin. Downloaded the MD5 file and every time I try to flash it I get a big "FAIL" at modem.bin. Thoughts?
This is what I get. Please help!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you solve this yet? Same issue here!
what version odin you using?
What firmware you want to flash?downgrade or upgrade?

Categories

Resources