Database Develop

Please help - Stock FRF91 to CM6

Hi, really hoping someone can help me here.
I have a Nexus One that was running a stock Android 2.2 FRF91, and I want to go to a CM ROM.
I've been following the wiki guide here.
I have completed the "Unlocking the Bootloader" section.
I have chosen to use Amon_Ra's recovery. When I ran the command this is what I got back in the command window, so it looks to have been successful.
C:\AndroidSDK\tools>fastboot flash recovery recovery.img
sending 'recovery' (3962 KB)... OKAY [ 0.764s]
writing 'recovery'... OKAY [ 1.576s]
finished. total time: 2.340s
I was then able to update the Radio. Now I'm stuck trying to flash the ROM.
This is exactly what I do leading up to my current problem.
Switch the phone on holding down the trackball.
Select Bootloader option.
Select Recovery.
At this point it reboots, but I am left with a little green android man and a white triangle with an orange ! mark.
HELP! Thank you.

edesignuk said:
This is exactly what I do leading up to my current problem.
Switch the phone on holding down the trackball.
Select Bootloader option.
Select Recovery.
At this point it reboots, but I am left with a little green android man and a white triangle with an orange ! mark.
HELP! Thank you.
Click to expand...
Click to collapse
Simple:
After install recovery reboot holding VOL DOWN and enter first time in Amon-RA.
Now "flash update.zip"----->CyanogenMod6-RC2 (it contains root etc.)
If you reboot and retry to enter in recovery you'll have little android in triangle...that's because ota FRF91 has a script in system/etc/install-recovery.sh that at every boot change at default recovery. If you have root you can delete that file, but if you haven't you have to do that:
1. install recovery
2. at reboot enter directly in recovery (at first time)
3. install cyano rom
4. reboot
5. now you can flash amon-ra recovery and it is forever

Hello, and thanks for your quick reply!
Still problems though...I'll note exactly what I'm doing.
Phone is not connected to USB and is switched off.
Hold down VOL DOWN and Power button.
Press VOL DOWN and then press in the Power button to select RECOVERY.
Now the phone reboots and I'm back to the little green man with the triangle and orange ! mark.
:-S

edesignuk said:
Hello, and thanks for your quick reply!
Still problems though...I'll note exactly what I'm doing.
Phone is not connected to USB and is switched off.
Hold down VOL DOWN and Power button.
Press VOL DOWN and then press in the Power button to select RECOVERY.
Now the phone reboots and I'm back to the little green man with the triangle and orange ! mark.
:-S
Click to expand...
Click to collapse
So..
Enter in fastboot and reload recovery with fastboot, at the first reboot enter in recovery....first time you'll enter in AMon-RA and do what i wrote up.

Sorry, so just to be clear...
Are these the steps to follow?
Connect phone to PC.
Power on phone holding down the power button
From the PC running the command fastboot flash recovery recovery.img
At first reboot after this hold down VOL DOWN to flash CM update.zip
Is that correct?
Thanks.

edesignuk said:
Sorry, so just to be clear...
Are these the steps to follow?
Connect phone to PC.
Power on phone holding down the power button
From the PC running the command fastboot flash recovery recovery.img
At first reboot after this hold down VOL DOWN to flash CM update.zip
Is that correct?
Thanks.
Click to expand...
Click to collapse
No (IMPORTANT (not reboot completely):
1. connect phone and POWER UP holdin VOL DOWN
2. enter in fastboot and reload amon-ra recovery first
3. at reboot (after you have loaded amon-ra) VOL DOWN and choose recovery with POWER button----------->AMOn-RA
...............understood?

OK, so I'm doing what you say.
I have the phone connected to the PC.
I turn it on holding the VOL DOWN button.
I get to a white screen with 3 green android men and 4 options (FASTBOOT, RECOVERY, CLEAR STORAGE, and SIMLOCK).
From a command prompt on the PC I try to run fastboot flash recovery recovery.img, but this just sits there saying ( waiting for device ).
If I try to enter the RECOVERY mode it reboots back the point point where I was stuck to begin with.
I really appreciate your help, please stick with me! Thanks.
WAIT! Think I've got it working...will report back shortly.

edesignuk said:
OK, so I'm doing what you say.
I have the phone connected to the PC.
I turn it on holding the VOL DOWN button.
I get to a white screen with 3 green android men and 4 options (FASTBOOT, RECOVERY, CLEAR STORAGE, and SIMLOCK).
From a command prompt on the PC I try to run fastboot flash recovery recovery.img, but this just sits there saying ( waiting for device ).
If I try to enter the RECOVERY mode it reboots back the point point where I was stuck to begin with.
I really appreciate your help, please stick with me! Thanks.
Click to expand...
Click to collapse
When you are in blank screen you have to see fastboot in red.
In prompt have you written: fastboot devices?
It gives you such a "HTC 123455666..." If yes you have to load recovery like first time...after you have to choose recovery in blank screen if possible directly with POWER BUTTON...i hope..

Hurrah! Think it looks to be complete now.
Thank you so much for your help HTCDevil.

edesignuk said:
Hurrah! Think it looks to be complete now.
Thank you so much for your help HTCDevil.
Click to expand...
Click to collapse
Just a little help

[CLOSED] Stuck in bootloop - Cant load a recovery

Hello,
I tried to flash Slim ROM on my TMo HTC One and I accidentally soft-bricked it.
First, I unlocked the bootloader, put the zip folder in storage and then went straight for flashing a ROM.
Since then, I am stuck in a bootloop even when I try to run recovery - I flashed TWRP.
Can anoyone help?

nonaresu said:
Hello,
I tried to flash Slim ROM on my TMo HTC One and I accidentally soft-bricked it.
First, I unlocked the bootloader, put the zip folder in storage and then went straight for flashing a ROM.
Since then, I am stuck in a bootloop even when I try to run recovery - I flashed TWRP.
Can anoyone help?
Click to expand...
Click to collapse
yes, this is pretty simple:
You can boot into your bootloader by pressing the power button for a long time and if the display turns off, press the volume down button and hope you jump into your bootloader.. try this out until you manage to get into your bootloader. If this doesn't work, you should hold your phone below a bright light so the sensor recognizes it.. then play around with your power button and volume buttons and you should be able to boot into your bootloader. Then connect your phone to the PC and use this fastbootcommand after you navigated to fastboot on your phone:
Code:
fastboot erase chache
Now you should be able to boot into your recovery..
If it helped, hit the thanksbutton or ask other questions by quoting my post so I get notified and I can answer
If you managed to enter the recovery, say it, I write further instructions... Because if I write it now and the steps above didn't work... I wrote it for no reason and yeah... just say it

LibertyMarine said:
yes, this is pretty simple:
You can boot into your bootloader by pressing the power button for a long time and if the display turns off, press the volume down button and hope you jump into your bootloader.. try this out until you manage to get into your bootloader. If this doesn't work, you should hold your phone below a bright light so the sensor recognizes it.. then play around with your power button and volume buttons and you should be able to boot into your bootloader. Then connect your phone to the PC and use this fastbootcommand after you navigated to fastboot on your phone:
Code:
fastboot erase chache
Now you should be able to boot into your recovery..
If it helped, hit the thanksbutton or ask other questions by quoting my post so I get notified and I can answer
Click to expand...
Click to collapse
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself

nonaresu said:
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself
Click to expand...
Click to collapse
I would simply reflash recovery (maybe a different one) to make sure it's not the file you have

nonaresu said:
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself
Click to expand...
Click to collapse
ok.. in that case we have to do some other stuff..
Download the TWRP recovery, it's know to work better than CWM at it's current state, you can download the file for your HTC One here:
http://techerrata.com/browse/twrp2/m7 (credits to: http://teamw.in/ thanks for your awesome work!)
Then when you are in the fastboot mode, use this command:
Code:
fastboot flash recovery "C:\pathToYourRecovery\recoveryname.img"
Then boot into recovery... and if this doesn't work too, try this command:
Code:
fastboot boot "C:\pathToYourRecovery\recoveryname.img"
If you were able to get into the recovery, or if you were not able, pls answer

!! :good: It worked and I got successfully booted the recovery, I think I was flashing a wrong version of twrp before

[Q] Broken Fastboot Menu

I rooted my phone yesterday, it will load the fastboot menu but if i select any option(like recovery or normal boot) the phone will simply power off, does anyone have any idea whats going on? other than that the phone is fine. Because of this I can't boot into recovery.
PS. i rebooted once and found the CFQtest app in the app drawer after a failed attempt to reboot into recovery via the fastboot menu, however in panic I didn't let it complete the test and switched off the phone.

meetXD said:
I rooted my phone yesterday, it will load the fastboot menu but if i select any option(like recovery or normal boot) the phone will simply power off, does anyone have any idea whats going on? other than that the phone is fine. Because of this I can't boot into recovery.
PS. i rebooted once and found the CFQtest app in the app drawer after a failed attempt to reboot into recovery via the fastboot menu, however in panic I didn't let it complete the test and switched off the phone.
Click to expand...
Click to collapse
How you select recovery?
(Vol - for scrolling and for selecting vol +)

Thank you, Solved.
dani.galla said:
How you select recovery?
(Vol - for scrolling and for selecting vol +)
Click to expand...
Click to collapse
yes, vol- for scroll and vol+ for selecting, that's what I did but turns out that the problem was with the improperly unlocked bootloader. I had unlocked the bootloader via the autoroot for windows and I remember an error screen appearing once. So i relocked and manually unlocked the bootloader. its all working fine now.

P8 lite stuck at huawei logo

Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated

Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.

persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck

GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok

persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa

GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img

GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.

persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?

GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before

Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img

GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me

ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found

GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !

Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu

GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html

Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping

GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.

GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/

You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.

Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?

Stuck In Bootloop (Not able to get in fastboot or recovery mode)

My device went int bootloop suddenly while I was using it. I not able to get in fastboot (when I press Power + Down it shows fastboot window for a sec and reboots again ) or recovery mode(When I press Power + Up, Screen shows up saying no command).
I was using official build(July patch). I have not enabled ADB. My bootloader is also locked.
Is it possible to get this device working?
Any help will be appreciated.

dha72 said:
My device went int bootloop suddenly while I was using it. I not able to get in fastboot (when I press Power + Down it shows fastboot window for a sec and reboots again ) or recovery mode(When I press Power + Up, Screen shows up saying no command).
I was using official build(July patch). I have not enabled ADB. My bootloader is also locked.
Is it possible to get this device working?
Any help will be appreciated.
Click to expand...
Click to collapse
search for a video tut on youtube on testpoint

dha72 said:
...or recovery mode(When I press Power + Up, Screen shows up saying no command)....
Click to expand...
Click to collapse
This is normal behavior of stock recovery: seeing "no command" hold "power" and click "Vol+", - to get to the stock recovery menu (btw, search would 100% give you this tip even in these forums).
As you are locked, and thus you have surely lost user data, you can try to make factory reset from recovery menu.
Yet I'd try to connect phone to power and make numerous attempts to reboot, occasionally rebooting into fastboot and into recovery, - with the hope that phone will switch into the other A/B slot.
If nothing helps, TestPoint/EDL is the only option except service.
But again, the problem may be hardware issue, and as you are supposed to disassemble phone preforming TestPoint, I'd check connectors inside and tried to reboot again before reflashing in MiFlash. And do not forget to reflash in fastboot after MiFlash reflash (and unlock phone - which I did immediately after purchase).