Database Develop

Trying to install TWRP on Mate S

Model: HUAWEI CRR-L09
Product ID: 30460392
Build number: CRR-L09C368B146
Hoping for some help here! I'm not a complete noob and I have unlocked and flashed customs ROMs on a few devices before but I'm going round in circles with the Mate S I bought yesterday.
I think that I have successfully unlocked the bootloader (see attached pic) after I got the code online and it is also FRP unlocked. I don't seem to be able to flash TWRP though. I'm using twrp-2.8.7.0-carrera.img from here. After trying to flash TWRP with ADB I don't seem to have any recovery at all.
Vol Up + Power = Stuck on Huawei logo. Have to power off.
Vol Down + Power = Phone just starts up normally.
Vol Up + Vol Down + Power = Stuck on Huawei logo. Have to power off.
Below are some results from ADB commands if they help...
C:\Andsdk\platform-tools>adb devices
List of devices attached
UBE0216218000792 device
-----------------------------------
C:\Andsdk\platform-tools>adb reboot recovery
C:\Andsdk\platform-tools>
Phone restarts and stays on Huawei logo. Have to power off/on/off/on a few times to get it to start normally.
-----------------------------------
C:\Andsdk\platform-tools>adb reboot bootloader
C:\Andsdk\platform-tools>
Phone restarts as shown in photo attached. Nothing is clickable and the volume buttons do not select anything. Have to hold in the power button and then it reboots normally.
-----------------------------------
C:\Andsdk\platform-tools>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (24454 KB)...
OKAY [ 0.523s]
writing 'recovery'...
OKAY [ 0.208s]
finished. total time: 0.733s
C:\Andsdk\platform-tools>
But I can't get into recovery. On the TWRP website it mentions that you may have to manually enter recovery the first time you boot after installing TWRP to stop the custom recovery being overwritten. I have tried using Vol Up + Power on the first boot but nothing happens.
Any ideas? Can't start to use the phone until it's rooted ans I can restore some apps.
Thanks in advance.

i've got exactly the same problem since i converted my L09 to UL00, recovery is not booting up anymore and supersu is not working either.

Flash The TWRP again Using fastboot flash recovery twrp.img
then hold the volume up and volume down button and enter the command Fastboot reboot ..... dont let go of the buttons .... you should boot into twrp . hope this helps

andromodgod said:
Flash The TWRP again Using fastboot flash recovery twrp.img
then hold the volume up and volume down button and enter the command Fastboot reboot ..... dont let go of the buttons .... you should boot into twrp . hope this helps
Click to expand...
Click to collapse
Tried this numerous times, downloaded the TWRP.img again just to be sure.
As per my first post, the TWRP.img gives me an OKAY message but holding down either Vol Up + Vol Down + Power or just Vol Up + Vol Down and issuing the fastboot reboot command just leaves the phone showing the Huawei logo.
What has changed is that the Huawei eRecovery has reappeared. Vol Up + Power makes Huawei eRecovery start.
Vol Down + Power starts the 'FASTBOOT&RESCUE MODE' screen as per the pic I attached in the first post.
Any more ideas???
Thanks.

bluferbl said:
Tried this numerous times, downloaded the TWRP.img again just to be sure.
As per my first post, the TWRP.img gives me an OKAY message but holding down either Vol Up + Vol Down + Power or just Vol Up + Vol Down and issuing the fastboot reboot command just leaves the phone showing the Huawei logo.
What has changed is that the Huawei eRecovery has reappeared. Vol Up + Power makes Huawei eRecovery start.
Vol Down + Power starts the 'FASTBOOT&RESCUE MODE' screen as per the pic I attached in the first post.
Any more ideas???
Thanks.
Click to expand...
Click to collapse
I am having the exact same problem. Initially when I flashed twrp with fastboot I was getting a
failed (remote: command not allowed)
Click to expand...
Click to collapse
error however this seems to have righted itself and it looks to have flashed succesfully however when I try to boot into recovery I only get as far as the Huawei screen. I can reboot the phone and still use it so am not in a boot loop.

dublin.com said:
I am having the exact same problem. Initially when I flashed twrp with fastboot I was getting a error however this seems to have righted itself and it looks to have flashed succesfully however when I try to boot into recovery I only get as far as the Huawei screen. I can reboot the phone and still use it so am not in a boot loop.
Click to expand...
Click to collapse
Are you actually in Dublin? I am, with a Three locked Mate S. Perhaps Three did some extra security stuff???

bluferbl said:
Are you actually in Dublin? I am, with a Three locked Mate S. Perhaps Three did some extra security stuff???
Click to expand...
Click to collapse
Yes I am and Yes it sounds like they probably did.

dublin.com said:
Yes I am and Yes it sounds like they probably did.
Click to expand...
Click to collapse
Rhymes with anchors, starts with W!

OMG it works for me !
I downloaded the entire firmware with erecovery this night (by pressing power and volume up while the phone is plugged on the computer), since i modified the phone to ul00, it took me the whole night (chinese server i guess). so this morning I rebooted my phone and type the usual command :
Code:
adb reboot bootloader
Code:
fastboot flash recovery TWRP.img (or whatever is the name of your file)
Code:
fastboot reboot (my phone was still connected in usb, and i was pressing both volume up and volume done before press enter)
And voila !

bluferbl said:
Rhymes with anchors, starts with W!
Click to expand...
Click to collapse
My thoughts exactly.

bluferbl said:
Tried this numerous times, downloaded the TWRP.img again just to be sure.
As per my first post, the TWRP.img gives me an OKAY message but holding down either Vol Up + Vol Down + Power or just Vol Up + Vol Down and issuing the fastboot reboot command just leaves the phone showing the Huawei logo.
What has changed is that the Huawei eRecovery has reappeared. Vol Up + Power makes Huawei eRecovery start.
Vol Down + Power starts the 'FASTBOOT&RESCUE MODE' screen as per the pic I attached in the first post.
Any more ideas???
Thanks.
Click to expand...
Click to collapse
well after flashing twrp ... just switch off the device and boot normally and then use adb command .... adb reboot recovery ..... to reboot into twrp

andromodgod said:
well after flashing twrp ... just switch off the device and boot normally and then use adb command .... adb reboot recovery ..... to reboot into twrp
Click to expand...
Click to collapse
Just freezes on the Huawei screen.

dublin.com said:
Just freezes on the Huawei screen.
Click to expand...
Click to collapse
Did you tried the method i've explained earlier ?

Lightofdarkness666 said:
Did you tried the method i've explained earlier ?
Click to expand...
Click to collapse
Same with me, tried your methods but it never goes into recovery just freezes at the Huawei logo.
I'm not a developer so I've no idea but is it possible that Three Ireland could have added more security to the Mate S? Seems like a lot of trouble to go to.

bluferbl said:
Same with me, tried your methods but it never goes into recovery just freezes at the Huawei logo.
I'm not a developer so I've no idea but is it possible that Three Ireland could have added more security to the Mate S? Seems like a lot of trouble to go to.
Click to expand...
Click to collapse
After you installed and tried to reboot, it usually says something like " Root is not installed. Do you want to install?"
What option did you chose there?

bluferbl said:
Same with me, tried your methods but it never goes into recovery just freezes at the Huawei logo.
I'm not a developer so I've no idea but is it possible that Three Ireland could have added more security to the Mate S? Seems like a lot of trouble to go to.
Click to expand...
Click to collapse
Did you leave the USB cable plugged in while you were rebooting the phone and keep pushing both volume up and down ?

brumgav said:
After you installed and tried to reboot, it usually says something like " Root is not installed. Do you want to install?"
What option did you chose there?
Click to expand...
Click to collapse
Nope, no options at all.

Lightofdarkness666 said:
Did you leave the USB cable plugged in while you were rebooting the phone and keep pushing both volume up and down ?
Click to expand...
Click to collapse
Tried it both ways.

I'm having the same problem, but if you search for even a copy of the software online to try and extract the recovery.img to re-flash the same one, you can't find the same build.
It's infuriating.
Edit: I don't know if any of you have tried to Factory reset from the settings menu, but it won't let you do it now either, so if we were to return the phone to three then you will be sending it off with all of your data on it.

braenard said:
I'm having the same problem, but if you search for even a copy of the software online to try and extract the recovery.img to re-flash the same one, you can't find the same build.
It's infuriating.
Edit: I don't know if any of you have tried to Factory reset from the settings menu, but it won't let you do it now either, so if we were to return the phone to three then you will be sending it off with all of your data on it.
Click to expand...
Click to collapse
I wouldn't have bought the phone if I knew this was going to be such a pain!
Yeah, I tried a reset and the phone just hangs on the Huawei logo.
However I'm sure there's a genius out there that's gonna work this out!!!

Can't enter recovery mode after installing TWRP

Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !

ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.

I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !

ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.

Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help

I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?

ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration

gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?

ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds

gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?

ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood

gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?

ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination

gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?

ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.

gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?

ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick

gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:

ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro

gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...

Factory Reset

Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards

Klotz900 said:
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Click to expand...
Click to collapse
try to flash Stock ROM
.

i cant
persona78 said:
try to flash Stock ROM
.
Click to expand...
Click to collapse
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.

Klotz900 said:
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Click to expand...
Click to collapse
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.

keikari said:
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
Click to expand...
Click to collapse
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%

Klotz900 said:
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Click to expand...
Click to collapse
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.

keikari said:
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
Click to expand...
Click to collapse
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...

Klotz900 said:
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Click to expand...
Click to collapse
Bootloader i think is press vol -, don't release and plug USB
to flash rom you need default recovery in phone.
To flash copy update.zip to sd card, whit phone off press vol -, vol+ and power.
Or create a dload folder in sd card and copy to inside the update.app, can extract from update.zip, then whit phone off press vol -, vol+ and power.
.

Doogee s68pro not booting up after magisk update, black screen. What can i do to fix this?

So, I recently updated magisk on my phone and as usual to update my phone restarts, but this time it didn't boot up.
I think its in bootloop because when i connect it to my pc with a usb cable it goes on and off also, i cannot access to TWRP.

Can you get to bootloader (fastboot)?
If so you can restore a stock boot image and start over, or try to boot to TWRP with fastboot boot twrp.img and restore the boot image from there and then flash the installer (rename the .apk to .zip as per the new v22+ installation instructions).

I am unable to go into the bootloader or maybe im just doing it the wrong way do you mind guiding me? :/

or maybe i don't have the drivers..

my phone just connects and disconnects, so im not so sure i can go into the bootloader and launch a comand.

Can you shutdown your phone?

i don't think, because it's always turning on and off because the usb sound is going off and on in my pc so i dont really know

You need to use a button combo to get to bootloader or recovery (since you can't boot to Android). A quick web search gives this:
https://droidrecovery.com/doogee-s68-pro-recovery-mode/

thameme said:
i don't think, because it's always turning on and off because the usb sound is going off and on in my pc so i dont really know
Click to expand...
Click to collapse
Exactly like what happen to my device as well

Nope, it does not let me go into the bootloader. Not even with the button combo.

Do you have twrp installed on your phone by any chance? Also a stock boot.img?

First you need to calm down I know how frustrating seeing your device on bootloop and can't even shutdown it ...

i do not have twrp, but i can download a stock boot.img

would you like me to guide you how to fix it i don't have anything to do?

Yes, thank you.

Your device is going on bootloop right now and keep vibrating right?

it's not vibrating. but it probably is in bootloop

lol mine is vibrating while on bootloop okay enough chitchat let's start
vibration is actually good indication for the next process
prepare ADB and USB cable
Now press Power Button and VOL UP at the same time wait for vibration let go Power Button keep holding VOL up for at least 3secs then let go

it's still not vibrating

now press VOL DOWN there's 3 out of 1 chance that you actually made it to fastboot mode ...

help me

i was flashing a rom and when i rebooted the phone into system i was stuck on twrp splash ( twrp logo ) and i cant put the phone into any modes so please help me

same thing here. let me know if you can fix it. it happened to me cuz i installed twrp after installing lineageos android 12.

Update: Sent to store said he can't repair it with box. and that in order to fix it he needs to replace the board. i'll keep you updated

Keeps pressing power button it will power off or restart your phone and when it does insert data cable in phone it will boot phone in recovery mode.

If you didn't fix it. you got no other choice than replacing the board like i did. cost me 60 bucks

ghalyyy said:
i was flashing a rom and when i rebooted the phone into system i was stuck on twrp splash ( twrp logo ) and i cant put the phone into any modes so please help me
Click to expand...
Click to collapse
Plug your phone to pc
Hold power button +volume down for a few seconds
Then right before the phone logo shows, bixby + volume down
Now download mode shows. Flash twrp 3.6 and done
OR
Plug your phone to pc.
Turn off your phone / restart it.
Hold bixby button + power + volume down.
Now that you're in Download mode, you can flash twrp 3.6 via TWRP.

scalerize said:
If you didn't fix it. you got no other choice than replacing the board like i did. cost me 60 bucks
Click to expand...
Click to collapse
you wasted money on a simple fix. no need to replace motherboard