Related
Hello,
can anyone help me. My HTC phone m7 just had a count down and then shutdown for it self. It then began to reboot over and over and it never gets pass the HTC logo.
I tried:
1. going into the splash screen, but i reboots even when i do that. It happens so quickly i can't select fastboot, factory reset or anything.
2. Holding it close to a bring light and hard reset.
3. Waiting for 48 hours.
4. leaving the battery to drained and then hard reset.
I can't remove the battery. and when ever i put the phone to charge it keeps rebooting over and over.
keronmat said:
Hello,
can anyone help me. My HTC phone m7 just had a count down and then shutdown for it self. It then began to reboot over and over and it never gets pass the HTC logo.
I tried:
1. going into the splash screen, but i reboots even when i do that. It happens so quickly i can't select fastboot, factory reset or anything.
2. Holding it close to a bring light and hard reset.
3. Waiting for 48 hours.
4. leaving the battery to drained and then hard reset.
I can't remove the battery. and when ever i put the phone to charge it keeps rebooting over and over.
Click to expand...
Click to collapse
First, try holding the power button for few seconds till kapacitive buttons start flashing. If that doesn't help, press power + vol down to get into bootloader, and then post everything written there
donkeykong1 said:
First, try holding the power button for few seconds till kapacitive buttons start flashing. If that doesn't help, press power + vol down to get into bootloader, and then post everything written there
Click to expand...
Click to collapse
I tired pressing the volume+ down button but it goes into the splash screen, where I can choose fastboot or factory reset. But when I get there, the phone reboots before I can select anything.
When I hold the power button. I did this for at lease 2 mins. Nothing happens.
keronmat said:
I tired pressing the volume+ down button but it goes into the splash screen, where I can choose fastboot or factory reset. But when I get there, the phone reboots before I can select anything.
When I hold the power button. I did this for at lease 2 mins. Nothing happens.
Click to expand...
Click to collapse
OK, what does it say on that screen? Under "locked"?
There should be h-boot version and OS version above fastboot and factory reset options. We need that info to try to help you
donkeykong1 said:
OK, what does it say on that screen? Under "locked"?
There should be h-boot version and OS version above fastboot and factory reset options. We need that info to try to help you
Click to expand...
Click to collapse
Hey can you look at the image below. I took a picture of the screen so you can see what it says.
keronmat said:
Hey can you look at the image below. I took a picture of the screen so you can see what it says.
Click to expand...
Click to collapse
https://www.dropbox.com/s/vyd5vudl9...E60_MR_BrightstarUS_WWE_7.17.1540.51.exe?dl=0
Download this .exe to your computer, reboot your phone to bootloader mode, connect it to your computer, and run the .exe. That should fix any software issues
donkeykong1 said:
https://www.dropbox.com/s/vyd5vudl9...E60_MR_BrightstarUS_WWE_7.17.1540.51.exe?dl=0
Download this .exe to your computer, reboot your phone to bootloader mode, connect it to your computer, and run the .exe. That should fix any software issues
Click to expand...
Click to collapse
OK thanks, I will try this later as I am at work now. But would this work even if the phone keeps rebooting? How would the pc drivers connect to the phone?
keronmat said:
OK thanks, I will try this later as I am at work now. But would this work even if the phone keeps rebooting? How would the pc drivers connect to the phone?
Click to expand...
Click to collapse
If it's in bootloader mode it should be fine. In order to run the .exe file your phone must be in bootloader mode. You managed togo into bootloader, so there should be no problem. If that .exe doesn't solve your issue, than it's safe to say it's a hardware issue
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
donkeykong1 said:
If it's in bootloader mode it should be fine. In order to run the .exe file your phone must be in bootloader mode. You managed togo into bootloader, so there should be no problem. If that .exe doesn't solve your issue, than it's safe to say it's a hardware issue
Click to expand...
Click to collapse
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
keronmat said:
Hey thanks a lot this work for me.. at first I it didn't work but then I tried again and again and it did work thanks
Click to expand...
Click to collapse
Glad to hear that
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...
Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck
GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok
persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa
GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img
GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found
GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !
Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/
You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.
Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?
Hey Guys,
I unlocked my bootloader and installed TWRP in order to try to upgrade to Oreo.
After a while i decided to just stop with it and leave it stock.
I relocked the bootloader, but now it is hangs at 99% factory reset. Rebooting the phone just brings it back to factory reset.
How do i get in to Fastboot mode to unlock the bootloader again and see if it will just boot up?
Tried different key combo's but it only boots in to the factory reset procedure.....
1. Connect the usb cable already with the pc
2. Press and hold vol- and the power button
3. Connect the phone with the pc when the screen turns black
4. Still hold the buttons until you can see the fastboot screen
Striike said:
1. Connect the usb cable already with the pc
2. Press and hold vol- and the power button
3. Connect the phone with the pc when the screen turns black
4. Still hold the buttons until you can see the fastboot screen
Click to expand...
Click to collapse
Thanks! But i already tried that. Does not work. Always goes to Factory Reset.
Will let the battery drain for now and see what it does then.
i think you flashed the oreo compatible twrp on your phone this makes your nougat phone stuck in boot loop. Try to flash the nougat compatible twrp or try the stock recovery.
I had a problem just like this.
All I did was wait for the battery to drain while it was on the reset screen, and on next bootup it didn't didn't go to that screen.
z1rqdym said:
i think you flashed the oreo compatible twrp on your phone this makes your nougat phone stuck in boot loop. Try to flash the nougat compatible twrp or try the stock recovery.
Click to expand...
Click to collapse
I can't flash anything that is the problem. Cannot get it into bootloader or fastboot mode or anything.
Deevun39 said:
I had a problem just like this.
All I did was wait for the battery to drain while it was on the reset screen, and on next bootup it didn't didn't go to that screen.
Click to expand...
Click to collapse
I let it die, and then i plug in the charger and it boots. I see the initial setup screen but it then reboots again and goes to the Factory Reset loop again.
Guess i will keep trying
Ok i got a bit further.
When i let it die, and then plug it in it boots to android. But as soon as i reboot it, it will go back in to the Factory Rset procedure.
Also adb reboot bootloader does not send it to bootloader so i can unlock the bootloader.
I also tried putting firmware (UPDATE.APP) on an external SD card, but it will not do anything with that either.
Anyone any other suggestion?? Need to either unlock the bootloader, or somehow flash original firmware/recovery.
Audioffensive said:
Ok i got a bit further.
When i let it die, and then plug it in it boots to android. But as soon as i reboot it, it will go back in to the Factory Rset procedure.
Also adb reboot bootloader does not send it to bootloader so i can unlock the bootloader.
I also tried putting firmware (UPDATE.APP) on an external SD card, but it will not do anything with that either.
Anyone any other suggestion?? Need to either unlock the bootloader, or somehow flash original firmware/recovery.
Click to expand...
Click to collapse
can u boot to fastboot?is frp lock?
player98343 said:
can u boot to fastboot?is frp lock?
Click to expand...
Click to collapse
No unfortunately not. When it is booted after draining it, i can do adb reboot bootloader but it just does not go to bootloader. Just reboots back in to factory reset loop.
Audioffensive said:
No unfortunately not. When it is booted after draining it, i can do adb reboot bootloader but it just does not go to bootloader. Just reboots back in to factory reset loop.
Click to expand...
Click to collapse
how about plug your phone to pc/laptop then power button+volme down?
player98343 said:
how about plug your phone to pc/laptop then power button+volme down?
Click to expand...
Click to collapse
Had no succes with that either.....
Unlocking bootloader can only be done from bootloader itseld right??
Audioffensive said:
Had no succes with that either.....
Unlocking bootloader can only be done from bootloader itseld right??
Click to expand...
Click to collapse
i think you already need to send it to huawei service center since you cant boot to fastboot.
I really hoped there was something i could do since it does bootup after draining the battery.
Somehow the factory reset procedure should be stopped so that it boots up after a reboot. There must be some virtual switch to set or something. Problem is i only have adb to do something.
I managed to fix the issue with a tip from another thread.
After draining it again i let it boot again. Then i did a factory reset from the settings menu.
The phone then rebooted and did a lowlevel factory reset. That also was stuck on 99%.
I then rebooted the phone by long pressing the on/off button. The phone then restarted the lowlevel factory reset and that succeeded.
Now its working normally again
Audioffensive said:
I managed to fix the issue with a tip from another thread.
After draining it again i let it boot again. Then i did a factory reset from the settings menu.
The phone then rebooted and did a lowlevel factory reset. That also was stuck on 99%.
I then rebooted the phone by long pressing the on/off button. The phone then restarted the lowlevel factory reset and that succeeded.
Now its working normally again
Click to expand...
Click to collapse
Hello, I don't understand how you arrived to the menu to select factory reset. For me even if draining battery, it continues to loop in factory reset and stuck 99%. . can you explain the procedure step by step. thank you !
mar72kuss said:
Hello, I don't understand how you arrived to the menu to select factory reset. For me even if draining battery, it continues to loop in factory reset and stuck 99%. . can you explain the procedure step by step. thank you !
Click to expand...
Click to collapse
If after draining it still does not boot normally then this does not work for you unfortunately.
Audioffensive said:
Hey Guys,
I unlocked my bootloader and installed TWRP in order to try to upgrade to Oreo.
After a while i decided to just stop with it and leave it stock.
I relocked the bootloader, but now it is hangs at 99% factory reset. Rebooting the phone just brings it back to factory reset.
How do i get in to Fastboot mode to unlock the bootloader again and see if it will just boot up?
Tried different key combo's but it only boots in to the factory reset procedure.....
Click to expand...
Click to collapse
try to use this service firmware it will update your phone into B364
- put the dload folder into the root of a fat32 formatted SD_Card
- shutdown the phone
- While pressing vol_up + vol_down press power_on button the upgrade will be lunched automatically
if the file does not work please provide us with the exact phone model to get the correct file
RAR1991 said:
try to use this service firmware it will update your phone into B364
- put the dload folder into the root of a fat32 formatted SD_Card
- shutdown the phone
- While pressing vol_up + vol_down press power_on button the upgrade will be lunched automatically
if the file does not work please provide us with the exact phone model to get the correct file
Click to expand...
Click to collapse
Ehhhhmmmm...... I solved this already
I wrote that in a post too......
where is the solution to this problem
I have the same problem, what did you do to solve it?
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
aptop6 said:
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
Click to expand...
Click to collapse
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
keikari said:
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
Click to expand...
Click to collapse
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
lost_gamer9 said:
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
Click to expand...
Click to collapse
There's a change that you installed wrong TWRP and it keeps trying to boot recovery until it does it successfully. Though can't be sure since Honor 4x doesn't give any additional info. I can't remember how to fix it, but you could try to do force update, without update file.
Make sure you don't have 'dload' folder in root of your SDcard and that your device has high battery. Then hold vol + and vol - while powering device and keep holding them until it gets to update screen or until it boot loops again. If it gets to update screen your device should boot next time normally.