Database Develop

[DISCUSSION] Possible Hard Brick Fix

Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.

gays said z3x easy jtag can repair it!

T-95 said:
gays said z3x easy jtag can repair it!
Click to expand...
Click to collapse
Have you found any working method for g4?

benzersizadam said:
Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.
Click to expand...
Click to collapse
I know both g 2 and g3 had hardbrick fixes by grounding a pin out now i do know thT when u go through eemc write board diag u need the tot or kdz of the firmware ure phone was bricked on so if u bricked zv6 u have to get ure boot table from a zv6 tot

for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag

T-95 said:
for repair need dump from same phone, no i try to find lg g4 h810 dump, only after that can repair it via jtag
Click to expand...
Click to collapse
I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this
With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files
1st file was shared by someone in xda forum this file is from another phone but same emmc
Br
Shahzaib Jahangir

I think only unbrick z3 easy ztag for now

Shabby The Dev said:
I think to find those files to repair via emmc pinouts you need octoplus jtag pro this box give new update for lg g4s dead boot repair
but we want this repair via usb cable as i heard that someone repair it via usb cable in my country but don't really know how
So this was our hope that it was repair by usb cable
I think we want to make some hard work for finding those files to repair this
With my opinion
We need following files to repair this phone
1st msm8992 emmc ddr.mbn
2nd msm8992loader.hex
3rd our phone's rawprogram.xml and some sbl1 files
1st file was shared by someone in xda forum this file is from another phone but same emmc
Br
Shahzaib Jahangir
Click to expand...
Click to collapse
Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3

benzersizadam said:
Cant agree more. If we dump a G4 we can make same way. But we need to be sure that if it works as the same logic with g2 or g3
Click to expand...
Click to collapse
What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload
Sorry for bad english
Br
Shahzaib Jahangir

Shabby The Dev said:
What you exactly mean dump as I see i have dump for ls996 zv6 and zv7 emmc img file which was taken by working phone but my phone is ls991 if you want so i will upload
Sorry for bad english
Br
Shahzaib Jahangir
Click to expand...
Click to collapse
we need a dump from EXACTLY same model.

benzersizadam said:
we need a dump from EXACTLY same model.
Click to expand...
Click to collapse
Ok when i get this phone so i make the dump from it and upload it
Can you please guide me what is the dd commands for backup whole emmc
And one more thing i have octoplus box in this software there is dump nand option but when i start dump nand on this software it was backup the phone on download mode but by backing up it take so long time and the backup file was .bin format if you want this dump backup .bin file or dump.img file
Br
Shahzaib Jahangir

Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?

technoid1964 said:
Anyone have luck resurrecting an LG H810 from the Qualcomm 9008 mode yet? Or get the files for OCTOPLUS?
Click to expand...
Click to collapse
I think the only solution is jtag
some device supported it

Hi My phone got bricked LG G4 LS991.
I am about to buy octopus box LG with no-JTAG support will this help me to sort my issue or I need a JTAG one?

Here is the ZV6 LS991 Dump file.
http://www.gsm-file.com/index.php?route=download/confirm&dl_file_id=4035

I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.

Noksucow1 said:
I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.
Click to expand...
Click to collapse
how can i write booting files on sd card ?

Noksucow1 said:
I have a US991. I am able to create the file system on SD card and the phone while turn on and say Secure Boot Error 1006 and OFFICIAL underneath. I messed around for a while and made it change to LGE AndroidNET USB which does not show boot looping screen, but I can't replicate that again yet on my SD card.. I can do this with the LS991 dump and the files from a KDZ as well. I'm not sure what else to do? The trick here is to create the phones boot loader/file system on an SD card then insert it into the phone so you can get into download mode and flash.
Click to expand...
Click to collapse
HI, they are working on this I think......in this thread......with some success.
http://forum.xda-developers.com/tmobile-g4/help/unbrick-lg-g4-h811-9008-qualcomm-t3456421
It seems like you have an idea of what is going on.. I guess the idea is to have the proper DUMPS from all the variants.
What do you think about their progress? I think about their progress? Is it related to your suggestions and problems with your LS991? I think they are suggesting to make available all variant dumps.

Reply
benzersizadam said:
Ok guys i have heard lots of Qualcomm 9008 device bricks. I have an idea to fix it. Dont know if it is possible.
First of all refer to this thread : http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
There is a possiblity to write all parts but board diag doesnt work with G4.
I also have Nubia Emmc Write tool. But when i tried to flash rom from exrracted it needs xml file. I think this XML files refers to rom parts on chipset addresses.
So if someone can post or send me kind a file like this or a board diag which is supported with G4 there will be huge possiblity to test.
Please let us know what you think.
Click to expand...
Click to collapse
got a single image file for the lg g4 h811 with the xml files can you send me a copy of the nubia eemc dump tools?????????????? [email protected]

hello dear is these file are unbrick g4 .....can buy it or its fake
---------- Post added at 10:05 PM ---------- Previous post was at 10:04 PM ----------
http://www.easy-firmware.com/index.php?a=browse&b=category&id=17384

lg l90 d405n imei 0

someone help me fix this http://www.part.lt/perziura/7544e5576976a1b6092ca16490aa2087660.png

Check here: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 I had the same problem and I got it fixed using the tutorial that guy posted to me on that link. And since you're already on the KitKat version of android, I think it will be easier for you to fix it. I had to downgrade from Lollipop first in order to use this tutorial.

Lazgeor said:
Check here: http://forum.xda-developers.com/lg-l90/help/lost-imei-device-t3285130 I had the same problem and I got it fixed using the tutorial that guy posted to me on that link. And since you're already on the KitKat version of android, I think it will be easier for you to fix it. I had to downgrade from Lollipop first in order to use this tutorial.
Click to expand...
Click to collapse
but why qpst configuration don't detect my phone i installed all drivers in device manager i don't see ports imei lost after hard unbricked i flash lg l90 d405.img loader but my phone is lg l90 d405n model
http://www.part.lt/perziura/87b4cad117168fb06a60fb40da98405b41.jpg

kietuolis said:
but why qpst configuration don't detect my phone i installed all drivers in device manager i don't see ports imei lost after hard unbricked i flash lg l90 d405.img loader but my phone is lg l90 d405n model
http://www.part.lt/perziura/87b4cad117168fb06a60fb40da98405b41.jpg
Click to expand...
Click to collapse
Well I don't know My phone wasn't getting detected too but since I was on lollipop, when I installed kitkat again it got detected and I was able to finish the tutorial. If I find any more information I'll tell you.

Lazgeor said:
Well I don't know My phone wasn't getting detected too but since I was on lollipop, when I installed kitkat again it got detected and I was able to finish the tutorial. If I find any more information I'll tell you.
Click to expand...
Click to collapse
thanks i'll try to update to lollipop and back to kitkat again maybe it's work

Lg l90 d415 hardunbrick project

Hello guys if you have a hard bricked lg l90 d415 this could be your last fix... If you dont have hardbricked lg l90 d415 i would like you to send me txt partition file (of lg l90d415)if possible cmon we can fo this together

I wish I could help but I don't have a D415. How does one get the partition txt file to send to you? Did you try to extract if from kdz?

This was my idea all along. My friend and I might work on a program to extract the partition file and work it into a .txt format to use. Will give more info later.

mattandhimself said:
This was my idea all along. My friend and I might work on a program to extract the partition file and work it into a .txt format to use. Will give more info later.
Click to expand...
Click to collapse
yeah i know but i made this thread so people can help us and provide us some stuff if we cant get them (what i mean is that this thread is something like cm13 discussion is you know what i mean)the problem is that we will have to make a tool to unbrick our lg l90 d415 because the already made one will not work with our phone its not compatible. i contacted the developer that made the tool for lg g3 because the boarddiag was not compatible with the device....

{PLS HELP} LGflashtool stuck at 9% - Connection failed -

Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "

An3ru said:
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
Click to expand...
Click to collapse
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.

raptorddd said:
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
Click to expand...
Click to collapse
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.

An3ru said:
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
Click to expand...
Click to collapse
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811

raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-

An3ru said:
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
Click to expand...
Click to collapse
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards

raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!

raptorddd said:
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
Click to expand...
Click to collapse
Ok, but i might not be able to return it since its past the year. And with LGup I open the software and states that MODEL "unknown" and gets the COM port and the software im runing in a small window. Is there any fix for it, that you know of?.

An3ru said:
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
Click to expand...
Click to collapse
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931

raptorddd said:
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
Click to expand...
Click to collapse
I have it, but I attempt to flash it with lgflashtools and still stuck at 9%. Also tried LGup, and still im unable to do anything with that program

N950U hardbrick...help

HI, I bricked my N950u after rooting with the SamV2 method for snapdragon. I rooted it fine, then tried flashing stock firmware and supersu zip. I know snapdragon is bl locked but I thought I could possibly do something besides hard brick lol. Anyway, does a rooted n950u that they could share a partial or full sys dump with me so I can make a debrick img. Also if anyone knows how to un/debrick please let me know and share. Thanks in advance!!!!
P.s. I know it was stupid to do lol
p.p.s. if your not going to contribute to the solution and or insult my foolish decision please keep your comments to yourself, thanks

You cannot debrick. What does your phone do?
EDIT: you probably are not bricked anyway. Actually you might be bricked if you flashed stock rev1 firmware instead. That would brick you...

me2151 said:
You cannot debrick. What does your phone do?
EDIT: you probably are not bricked anyway. Actually you might be bricked if you flashed stock rev1 firmware instead. That would brick you...
Click to expand...
Click to collapse
I definitely am bricked because my pc picks the phone up as "HS-USB QDLOADER 9008" i.g. hard brick. Doesnt boot into odin, no display on the phone but vibration feedback when trying odin button combo

Vell123 said:
I definitely am bricked because my pc picks the phone up as "HS-USB QDLOADER 9008" i.g. hard brick. Doesnt boot into odin, no display on the phone but vibration feedback when trying odin button combo
Click to expand...
Click to collapse
Yup. Thats 100% a hardbrick. Unfortunatly the debrick img method doesnt work on this phone. Only way to fix at this moment is a carrier swap. Thats how I got mine fixed.

me2151 said:
Yup. Thats 100% a hardbrick. Unfortunatly the debrick img method doesnt work on this phone. Only way to fix at this moment is a carrier swap. Thats how I got mine fixed.
Click to expand...
Click to collapse
Carrier swap? can you explain a bit more? But I believe if I had a system dump for the note 8 I can make a un/debrick image just like previous Samsung devices. I'm willing to try but i dont have the software needed

Vell123 said:
Carrier swap? can you explain a bit more? But I believe if I had a system dump for the note 8 I can make a un/debrick image just like previous Samsung devices. I'm willing to try but i dont have the software needed
Click to expand...
Click to collapse
Mine died in the middle of an update and when i got it back on a computer it was in 9008. Was unable to fix it. took it to my carrier as I have insurance and they replaced it.

me2151 said:
Mine died in the middle of an update and when i got it back on a computer it was in 9008. Was unable to fix it. took it to my carrier as I have insurance and they replaced it.
Click to expand...
Click to collapse
Ahhh... definately dont have insurance. But thanks is your device rooted

Long shot but... qfil / firehose msm8998 is the way to go with this. Can be done, the hard part is getting the firehose programmer (and maybe rawprogram0 / patch0 xmls too)
Isnt it supported by Z3x / Sigma / Infinity / Octoplus?
Doesnt that "aryk" site have a load of programmer files that could work with your device?
Failing that, JTAG / EMMC flash (pinouts should be around somewhere)
Sorry can`t be more help. I`m working on a similar issue with a Moto Z2 play atm
EDIT: I`m sure the 835 (what you have) supports booting from the SD card.
You need to ask someone with a rooted Snapdragon N8 to make a copy of the first 167(ish) MB of mmcblk0
Like this... (Brief idea... whoever does this needs to do it obviously from shell, on the device itself wether thats from TWRP shell or ADB in *nix / Win thats up to you)
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
Once some kind soul has done this for you and you have downloaded it, write the resulting image to decent SD card using Win32diskimager, place in device and try booting. See if the bootloader runs enough to get you into ODIN.
YMMV but it is a recovery method for Snapdragons. Weather you overwrite EFS / Lose IMEI I don`t know. Only just getting back into Sammy scene.
It is kind of like a failsafe incase of EMMC corruption I think.
I can`t help with this sadly as I`m Exy

N10AP said:
Long shot but... qfil / firehose msm8998 is the way to go with this. Can be done, the hard part is getting the firehose programmer (and maybe rawprogram0 / patch0 xmls too)
Click to expand...
Click to collapse
Please explain a bit more
Isnt it supported by Z3x / Sigma / Infinity / Octoplus?
Click to expand...
Click to collapse
I have a z3x box
Doesnt that "aryk" site have a load of programmer files that could work with your device?
Click to expand...
Click to collapse
Please explain more if possible or provide web links
Failing that, JTAG / EMMC flash (pinouts should be around somewhere)
Sorry can`t be more help. I`m working on a similar issue with a Moto Z2 play atm
EDIT: I`m sure the 835 (what you have) supports booting from the SD card.
Click to expand...
Click to collapse
Thats what I hope to do
You need to ask someone with a rooted Snapdragon N8 to make a copy of the first 167(ish) MB of mmcblk0
Like this... (Brief idea... whoever does this needs to do it obviously from shell, on the device itself wether thats from TWRP shell or ADB in *nix / Win thats up to you)
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
Once some kind soul has done this for you and you have downloaded it, write the resulting image to decent SD card using Win32diskimager, place in device and try booting. See if the bootloader runs enough to get you into ODIN.
YMMV but it is a recovery method for Snapdragons. Weather you overwrite EFS / Lose IMEI I don`t know. Only just getting back into Sammy scene.
It is kind of like a failsafe incase of EMMC corruption I think.
I can`t help with this sadly as I`m Exy
Click to expand...
Click to collapse
Thanks for your input its help!

Vell123 said:
Thanks for your input its help!
Click to expand...
Click to collapse
I AM Rooted however all of my stuff is experimental. So my files wont work for you. Good luck though.

me2151 said:
I AM Rooted however all of my stuff is experimental. So my files wont work for you. Good luck though.
Click to expand...
Click to collapse
you cant do a backup and share files please:fingers-crossed:

Vell123 said:
you cant do a backup and share files please:fingers-crossed:
Click to expand...
Click to collapse
Sorry maybe u already tried it but here in UK there is a **** ton of mobile repair shop and in some of them are some heavy dutie geeks.
Maybe look around your area and see if you can find someone with big passion for problem solving.

Just got my Note 8. But I remember hard bricked phones in the past brought back to life with jtag devices. Anyone try Jtag device or gotten Jtag service done to hard bricked Note 8?
Last tax season was supposed to buy 1, but car issues. I know they're expensive. But if they can fix phones with ease. Then well worth it.

Vell123 said:
HI, I bricked my N950u after rooting with the SamV2 method for snapdragon. I rooted it fine, then tried flashing stock firmware and supersu zip. I know snapdragon is bl locked but I thought I could possibly do something besides hard brick lol. Anyway, does a rooted n950u that they could share a partial or full sys dump with me so I can make a debrick img. Also if anyone knows how to un/debrick please let me know and share. Thanks in advance!!!!
P.s. I know it was stupid to do lol
p.p.s. if your not going to contribute to the solution and or insult my foolish decision please keep your comments to yourself, thanks
Click to expand...
Click to collapse
did you manage to fix this? i have some unbricking files i want to test, let me know please

ProUnlocker said:
did you manage to fix this? i have some unbricking files i want to test, let me know please
Click to expand...
Click to collapse
i sent it to samsung but i going to re root and copy img partitions

I have unbrick files for flashing qdl9008 mode for bootloader rev 2.
If you are on samfail v2 or v2.5 maybe ot the normal rev 2 bootloader they should work.
Let me know if you need them.

BigCountry907 said:
I have unbrick files for flashing qdl9008 mode for bootloader rev 2.
If you are on samfail v2 or v2.5 maybe ot the normal rev 2 bootloader they should work.
Let me know if you need them.
Click to expand...
Click to collapse
I definately could use them. I am in the same boat.

Unbrick Files
guysmiley82 said:
I definately could use them. I am in the same boat.
Click to expand...
Click to collapse
Go to this thread.
I will post the files and instructions there in the thread i started for unbricking.
https://forum.xda-developers.com/galaxy-note-8/how-to/note-8-n950u-qdl9008-edl-mode-unbrick-t3851345

did you get this resolved, I am stuck only being able to go into upload mode. I can shut it off with power and vol. down but the only thing it does is go back into upload when I try button combos. bootloader 6 btw