Database Develop

fix fastboot rescue mode

Please Help me
My Huawei Honor 4x
was locked and stay in fastboot and rescue mode
please, how to fix it ?:crying:

I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help

well depends, are you on che2-xx or che1? because i know only about che2, and anyways, what error says in the rescue mode?

Fastboot & Rescue Mode
Thadab said:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
Click to expand...
Click to collapse
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...

solution
download official rom and put update.APP to dload folder on SD card.
than turn off phone and press all three buttons together Volume + and - and power.
It will install fresh os on your phone

Amin Benzema said:
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
Click to expand...
Click to collapse
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.

hackslash said:
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
Click to expand...
Click to collapse
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!

Amin Benzema said:
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Click to expand...
Click to collapse
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do

hackslash said:
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
Click to expand...
Click to collapse
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㄰㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!

Amin Benzema said:
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㄰㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Click to expand...
Click to collapse
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.

just blinking red light once and green light twice! still alive
hackslash said:
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
Click to expand...
Click to collapse
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?

farzadmaverick said:
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
Click to expand...
Click to collapse
No my bro.it's Dead.you should change your mobile mother board with another honor 4x(it's expensive) or you should find a programed EMMC that exactly is for che-tl00h(almost hard to find for this model) or sell your hard bricked phone(best way like my way). Of course you can find your dump files and give them to a technician for flashing on a unprogramed EMMC,but I know you can not find dump files for this model easily.
This is a real experience for focusing on model of the phone that we purchase for next shopping.
We should just buy a Global released model,not a china model.
Persian:dadash manam az alaedin raft tu pacham,vali azin be baad faqat ye bakhshe tahghigham check kardane behtarin o bi dardesar tarin modele un dasgahie k madde nazarame.ke dg eshtebahi nakharam.
Che2-L11 ham modele khubie az honor 4x.

thank you. I already gave up and buy another phone

That's sad

U could have much before giving up , u still own it ?

gopinaidu77 said:
U could have much before giving up , u still own it ?
Click to expand...
Click to collapse
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Amin Benzema said:
Whats the solution??!
Click to expand...
Click to collapse
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!

Amin Benzema said:
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Click to expand...
Click to collapse
No u can still fix it buddy. I can help u

gopinaidu77 said:
No u can still fix it buddy. I can help u
Click to expand...
Click to collapse
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.

That will be helpful

Amin Benzema said:
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
Click to expand...
Click to collapse
So before that , i need some info to make final solution

p10 lite bricked

Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.

eskeyo said:
Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.
Click to expand...
Click to collapse
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone

Armin.K said:
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone
Click to expand...
Click to collapse
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.

eskeyo said:
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.
Click to expand...
Click to collapse
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.

Armin.K said:
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.
Click to expand...
Click to collapse
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?

eskeyo said:
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?
Click to expand...
Click to collapse
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?

Armin.K said:
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?
Click to expand...
Click to collapse
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .

eskeyo said:
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .
Click to expand...
Click to collapse
No problem

Bricked device, please help!

I was installing EliteRom v4 but data partition was damaged and i could not change its filesystem to f2fs and I rebooted then and got the eRecovery telling data partition is damaged so i pressed "fix". it rebooted and now i cant access twrp or , just huawei software update and eRecovery, eRecovery pops up when booting without any key combinations, just power button. Any help? EDIT: FASTBOOT IS ACCESIBLE

Deleted post

EeliX7 said:
Okay, found another post and used its info to solve this.
Click to expand...
Click to collapse
Link to the post please which helped you to solve your problem?
It may be helpful for others

I was way too fast in editing that post didnt solve my problem as i cant turn usb debuggin on (was off at the moment i was installing) and the command line gives an error "remote:command not allowed" when attempting to unbrick by flashing system, boot, cust and recovery img (sorry for his terrible writing im on my tablet that is antique lags like hell even tho i have cm13)

EeliX7 said:
I was way too fast in editing that post didnt solve my problem as i cant turn usb debuggin on (was off at the moment i was installing) and the command line gives an error "remote:command not allowed" when attempting to unbrick by flashing system, boot, cust and recovery img (sorry for his terrible writing im on my tablet that is antique lags like hell even tho i have cm13)
Click to expand...
Click to collapse
So you are still stuck? Need help?

Well I sent the phone to repair due to TRUE laziness... So I don't need help with that anymore, thanks anyway

EeliX7 said:
Well I sent the phone to repair due to TRUE laziness... So I don't need help with that anymore, thanks anyway
Click to expand...
Click to collapse
I hope the tech repair guys fixes it. :angel:

sniperlife:D said:
I hope the tech repair guys fixes it. :angel:
Click to expand...
Click to collapse
Well they are equipped to fix this

shashank1320 said:
Well they are equipped to fix this
Click to expand...
Click to collapse
Yes. But I experienced tech guys before who were new to a certain problem. They were not able to fix it then.

Back in 2011 when I was a kid, it took 2 weeks to "repair" my bricked tab. The tab travelled over 400 kilometres!

THIS REPLY IS THE 3000th post in Honor 5C QnA

EeliX7 said:
THIS REPLY IS THE 3000th post in Honor 5C QnA
Click to expand...
Click to collapse
Good achievement:good:

Goes to show how active honor forums are.

sniperlife:D said:
Goes to show how active honor forums are.
Click to expand...
Click to collapse
More than active...lol.
This is since honor 5X development started to get boost. People came to honor forum

lol the people on the goddamn service centre actually thought there was warranty left... FREE REPAIR!

EeliX7 said:
lol the people on the goddamn service centre actually thought there was warranty left... FREE REPAIR!
Click to expand...
Click to collapse
Thats cool. I got mine extended for 6 months when i relocked bootloader and no one could identify lol.

MDM error, tablet T713 stuck on bootloop.

Hello everyone,
I have my tablet SM-T713 which finds itself completely blocked following a dumpling on my part:
I had activated a software which prevented the installation of software etc on the tab and wanting to simply reset, I had the ingenious idea of ​​making a Wipe data and attempted an installation of a full firmware via Odin above .
Fatal error ! Unable to write on it (MDM) and I find myself in bootloop without the possibility of writing on it or anything.
I tried the TWRP flash without success, I cannot try in ADB or SD : refused.
Is there a tiny hope or can I use it freezbie?
Thank you really much by advance.
Jonathan

Hey,
i have a question: can i use a full nand erase on Odin ? Maybe it's the good solution to repair my tablet?
Thank you !

kurtspirit said:
Hey,
i have a question: can i use a full nand erase on Odin ? Maybe it's the good solution to repair my tablet?
Thank you !
Click to expand...
Click to collapse
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).

bmwdroid said:
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).
Click to expand...
Click to collapse
Hello,
really interesting ! I think that could be the way to recover my device but it still one big problem : find the QPST firmware :/
I check it on the web and i don't find it for T713 Samsung.
Maybe someone here know if it's possible to find it or have a way to "build" it ?
All help will be really aprreciated !
Best regards

kurtspirit said:
Hello,
really interesting ! I think that could be the way to recover my device but it still one big problem : find the QPST firmware :/
I check it on the web and i don't find it for T713 Samsung.
Maybe someone here know if it's possible to find it or have a way to "build" it ?
All help will be really aprreciated !
Best regards
Click to expand...
Click to collapse
Well I don't know how to build it (yet?) but as I'm interested to know as well, I've asked for how-to on that specific page.
Downloaded a stock T713 ROM and unpacked it.
It contains .mbn files but no .edf I can't identify all what the .mbn are for, if these would be sufficient or more/others are needed.
And of course don't know if the found ones could usefully be flashed with the QPST.
Hope the guy from that page will give positive answers.

bmwdroid said:
Just read something about EDL I didn't know anything about before.
Perhaps this helps.
https://www.the***********.com/qualcomm-edl-mode-guide/
This adress seems censored so you have to replace the star by (custom) followed directly by (droid).
Click to expand...
Click to collapse
bmwdroid said:
Well I don't know how to build it (yet?) but as I'm interested to know as well, I've asked for how-to on that specific page.
Downloaded a stock T713 ROM and unpacked it.
It contains .mbn files but no .edf I can't identify all what the .mbn are for, if these would be sufficient or more/others are needed.
And of course don't know if the found ones could usefully be flashed with the QPST.
Hope the guy from that page will give positive answers.
Click to expand...
Click to collapse
Ok thank you. I hope too. I'm stuck with this tablet . I have a riff box , i try to contact support and i have a good return but i need to find the jtag points on motherboard...
Thank you again for your help.
Have a good day.
Jonathan

kurtspirit said:
Ok thank you. I hope too. I'm stuck with this tablet . I have a riff box , i try to contact support and i have a good return but i need to find the jtag points on motherboard...
Thank you again for your help.
Have a good day.
Jonathan
Click to expand...
Click to collapse
The guy wrote an answer but not helpful at all:
<Hi. In case of Samsung devices, the only thing that will work is the Odin program. It’s hard to see a Samsung device getting hard bricked, just because Samsung has all those critical partitions blocked from being flashed. If you ever come across a soft-brick, you can just use Frija to download the latest Odin-flashable firmware and push it through Odin.>
So sorry.

bmwdroid said:
The guy wrote an answer but not helpful at all:
<Hi. In case of Samsung devices, the only thing that will work is the Odin program. It’s hard to see a Samsung device getting hard bricked, just because Samsung has all those critical partitions blocked from being flashed. If you ever come across a soft-brick, you can just use Frija to download the latest Odin-flashable firmware and push it through Odin.>
So sorry.
Click to expand...
Click to collapse
Hello,
bad news Anyway, thank you for your help , i really appreciate that you tried to find a solution for me.
I'll try to find a way to resolve this problem.
Thank you again and have a really good day
Jonathan

@kurtspirit hope that you'll manage to revive it.
Keep us updated.
Good luck.

kurtspirit said:
Hello everyone,
I have my tablet SM-T713 which finds itself completely blocked following a dumpling
.........
Is there a tiny hope or can I use it freezbie?
Thank you really much by advance.
Jonathan
Click to expand...
Click to collapse
lots of good info on "edl mode" and howto use it. If someone could give you a "dump"
you could write to your device. .
[GUIDE] How to dump and write back the storage on most of Qualcomm devices
This is a generic guide that could be suitable for many Qualcomm based devices, once the phone can be triggered to EDL mode. To make sure this guide will work as expect, following requirements are needed: - Know how to trigger the phone to EDL...
forum.xda-developers.com

Redmi Note 9 - How do I restore my IMEI? I don't have a backup of my nvram/nvdata but I have the numbers.

How do I write IMEI along with baseband version back to my phone? I really don't want to risk bricking it again, that's enough stress for me in the past two days
I heard that I can only flash IMEI 2 back to it, and if I want flashing IMEI 1 as well I'd need to install a custom rom on the phone. So if that's a solution I'd love if someone could help me with it. MIUI 13 is slow and laggy af (which is the reason I bricked the phone in the first place, to install a better ROM).
But here's something, when I flash the phone's firmware through fastboot, issues start to rise (as per my experience with it so far), but through SP Flash Tool, it's alright. So I'd love to know if installing custom ROMs using the tool would be alright, if not then if recovery is required or if fastboot is fit for the job. If that's an issue I'd love if someone could give me advice when it comes to it.
Old post 1: (not my current situation)
"Long story short, I bricked the phone and after months, I've finally been able to repair it (downgraded from MIUI 13 to MIUI 11), but I lost my IMEI. I have the phone's two IMEI numbers, but I could not find any tool to help me write it to the phone. Either that, or I don't know whether the phone should be turned on or off, or if there's any special mode that's required for that matter.
Help would really be appreciated."
Old post 2:
"It happened after manually installing engineering ROM on it, now I can only doubt it's BROM mode that's working and nothing else, but I'm not sure. SP Flash Tool doesn't want to work with the phone since I want to flash the stock rom back. I really need help please."

YLTN said:
Long story short, I bricked the phone and after months, I've finally been able to repair it (downgraded from MIUI 13 to MIUI 11), but I lost my IMEI. I have the phone's two IMEI numbers, but I could not find any tool to help me write it to the phone. Either that, or I don't know whether the phone should be turned on or off, or if there's any special mode that's required for that matter.
Help would really be appreciated.
Click to expand...
Click to collapse
Install Engineering ROM and then write imei using available tools.

mvikrant97 said:
Install Engineering ROM and then write imei using available tools.
Click to expand...
Click to collapse
I fear that if I install the ROM, the phone might brick again

YLTN said:
I fear that if I install the ROM, the phone might brick again
Click to expand...
Click to collapse
Why?

mvikrant97 said:
Why?
Click to expand...
Click to collapse
The reason why my phone broke in the first place was due to flashing a misc.bin file after following a YouTube tutorial. It was part of a process to download twrp on the phone unofficially. Since then I started looking for ways to fix it until I finally found a post that had to do with fixing nvdata corruption (which was the error I had prior to fixing the phone) which helped.
So yeah, I don't think I can trust flashing ROMs on my phone as much as before, but I'll still try the engineering ROM thing.

mvikrant97 said:
Why?
Click to expand...
Click to collapse
So um...it bricked. This time worse than before. It doesn't turn on at all no matter how long I press the power button. It was after I manually flashed eng rom.

YLTN said:
So um...it bricked. This time worse than before. It doesn't turn on at all no matter how long I press the power button. It was after I manually flashed eng rom.
Click to expand...
Click to collapse
Does it shows up in device manager?

mvikrant97 said:
Does it shows up in device manager?
Click to expand...
Click to collapse
Yep, it doesn't show up as it's name or "Android", it shows up as MediaTek USB Port (COM3), that's why I doubted it to be in BROM mode.

YLTN said:
Yep, it doesn't show up as it's name or "Android", it shows up as MediaTek USB Port (COM3), that's why I doubted it to be in BROM mode.
Click to expand...
Click to collapse
By the way, after trying to connect to it using mtkclient, I got this error:
DeviceClass - [LIB]: ←[31mCouldn't get device configuration.←[0m

YLTN said:
By the way, after trying to connect to it using mtkclient, I got this error:
DeviceClass - [LIB]: ←[31mCouldn't get device configuration.←[0m
Click to expand...
Click to collapse
Hold on, it worked now for some reason when I disconnected the battery, but it keeps connecting and disconnecting so that's an issue.
I'll try to reconnect the battery and see.

YLTN said:
Hold on, it worked now for some reason when I disconnected the battery, but it keeps connecting and disconnecting so that's an issue.
I'll try to reconnect the battery and see.
Click to expand...
Click to collapse
Please install LIB USB drivers.
Visit this tutorial here on xda

mvikrant97 said:
Please install LIB USB drivers.
Visit this tutorial here on xda
Click to expand...
Click to collapse
Bro, thank you so much, the phone's unbricked now. I couldn't believe my eyes
But for now, is there any solution for the IMEI problem?

YLTN said:
Bro, thank you so much, the phone's unbricked now. I couldn't believe my eyes
But for now, is there any solution for the IMEI problem?
Click to expand...
Click to collapse
I always recommend a NV Backup before messing up with your own device, that's all I know.
Download the file attached here but remember you can fix only second IMEI using this method. Please don't try to fix both IMEI or NV Data will be corrupted again.
Video Tutorial to Follow Video Tutorial

mvikrant97 said:
I always recommend a NV Backup before messing up with your own device, that's all I know.
Download the file attached here but remember you can fix only second IMEI using this method. Please don't try to fix both IMEI or NV Data will be corrupted again.
Video Tutorial to Follow Video Tutorial
Click to expand...
Click to collapse
The guy in the video is using MIUI 12, I have MIUI 13. I don't know if that's an issue but someone in the comments said something about MIUI or so. I'm not a professional but many times when I see tutorials they're very specific with the MIUI version.
Also, I'm not sure how to back up nv data, do I use mtkclient or is it somewhere in the attachment you sent me?
And one more thing, my phone's baseband version is unknown, could that affect the process?

YLTN said:
The guy in the video is using MIUI 12, I have MIUI 13. I don't know if that's an issue but someone in the comments said something about MIUI or so. I'm not a professional but many times when I see tutorials they're very specific with the MIUI version.
Also, I'm not sure how to back up nv data, do I use mtkclient or is it somewhere in the attachment you sent me?
And one more thing, my phone's baseband version is unknown, could that affect the process?
Click to expand...
Click to collapse
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.

mvikrant97 said:
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.
Click to expand...
Click to collapse
Alright then, I'll follow the steps and tell you the results once I'm done.

mvikrant97 said:
You don't need the backup anymore and you can follow the tutorial in the video irrespective of the MIUI version you have.
I have also attached the files that are used in the video.
Click to expand...
Click to collapse
The phone keeps rebooting when connecting it to Maui META. Like it shows META MODE at the bottom of the screen but then it turns off. Now it's bootlooping. I guess I'll have to flash MIUI on it again. At least I still have access to fastboot and recovery.
Update: NV Data corrupted after flashing MIUI, but I got a solution that hopefully works.
Update 2: After flashing MIUI 11 (along with some other nvdata and nvram files, i think they're just empty), it works now and the error is gone. But as I said IMEI issue's still there. Maybe I would need engineering ROM for this one? Although it bricked my phone before.
Also, the phone started bootlooping before attempting the Maui META thing, so maybe it's either the manual formatting of partitions or the files I flashed on it.

YLTN said:
The phone keeps rebooting when connecting it to Maui META. Like it shows META MODE at the bottom of the screen but then it turns off. Now it's bootlooping. I guess I'll have to flash MIUI on it again. At least I still have access to fastboot and recovery.
Update: NV Data corrupted after flashing MIUI, but I got a solution that hopefully works.
Update 2: After flashing MIUI 11 (along with some other nvdata and nvram files, i think they're just empty), it works now and the error is gone. But as I said IMEI issue's still there. Maybe I would need engineering ROM for this one? Although it bricked my phone before.
Also, the phone started bootlooping before attempting the Maui META thing, so maybe it's either the manual formatting of partitions or the files I flashed on it.
Click to expand...
Click to collapse
Try flashing the ENG rom and try fixing your IMEI

mvikrant97 said:
Try flashing the ENG rom and try fixing your IMEI
Click to expand...
Click to collapse
So I ran into another issue. it tells me I need "exaid-verified.img" and that verified boot is enabled, which is not present in the ENG ROM folder.

mvikrant97 said:
Try flashing the ENG rom and try fixing your IMEI
Click to expand...
Click to collapse
Btw one more thing, I can update my phone right? Like, it won't break my phone? I'm good with MIUI 11 but I wonder if updating it would fix baseband version.