Related
Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you
piring said:
Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you
Click to expand...
Click to collapse
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!
antoniovazquezblanco said:
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!
Click to expand...
Click to collapse
Thanks for the reply friend. I really appreciate it.
Regarding the unlock bootloader, following the tutorial that you have greatly linked to, it says in one of the step it to select a device. But, I did not see any mention of Ascend P7, or for that matter, I'm not aware of another given name for Ascend P7, so, which one should I choose or any selected device would be fine?
Thank you again for taking time to help me. Much appreciated.
antoniovazquezblanco said:
Please wait confirmation from more experienced users than me but what I would have done if I were you:
1 - Try to unlock the bootloader. For that there are tutorials here in XDA: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
2 - With unlocked bootloader you should be able to flash a new rom!
Hope it helps!
Click to expand...
Click to collapse
Also, because my phone is stuck in bootloader and can't even reboot to get past the Huawei Ascend screen, how do I get the product ID for my phone? Thank you
try with a usb jig i will try with that
Joseluisska said:
try with a usb jig i will try with that
Click to expand...
Click to collapse
Thanks for the suggestion. But apparently, I believe this is a level beyond my scarce knowledge of electronics.
But I truly appreciate the time you took to reply and suggest ways to help me. Thanks friend.
piring said:
Thanks for the reply friend. I really appreciate it.
Regarding the unlock bootloader, following the tutorial that you have greatly linked to, it says in one of the step it to select a device. But, I did not see any mention of Ascend P7, or for that matter, I'm not aware of another given name for Ascend P7, so, which one should I choose or any selected device would be fine?
Thank you again for taking time to help me. Much appreciated.
Click to expand...
Click to collapse
As it is said in the tutorial you should modify the values of the list in order to include our phone model (step 3 and following...).
Also, because my phone is stuck in bootloader and can't even reboot to get past the Huawei Ascend screen, how do I get the product ID for my phone? Thank you
Click to expand...
Click to collapse
I didn't think of that... I'm sure part of that info is available in the phone case but can't ensure that everything is there...
By the way I've never tried a JIG so any feedback on it would be nice!
i have the some problem... how i had resolved?
have u found a flashabe zip stock rom? or other way?
piring said:
Hi there,
recently, I tried updating my phone to B609, following a certain website's guide.
and upon finishing it, it showed the following attachment.
I have tried following almost all I can to revert it, but sadly, it does not work. and, it was a very stupid decision of me to try and update it, full-knowingly that I have a rather obsolete knowledge regarding this.
Can someone please help me, I am really sorry to have bothered the visitors of this forum, and if my thread is not in it's place, please guide me to find a proper place to help me with my phone.
Thank you
Click to expand...
Click to collapse
did you manage to solved your problem in your phone?if yes please help me,i got same tia
What is your exact problem? Unlocking the bootloader or flashing a new rom?
Hey bro while flashing lollipop ROM emui 3.1 in my huawei p7 it got stuck in boot loader , so I thought to revert it back to the stock ROM and I backed up my stock ROM through twrp but when I restored it It again locked my boot loader plus its stuck in boot screen... What do I do.... How am I supposed to unlock my boot loader without knowing my phone product I'd ,imei etc.... Previously I unlocked my boot loader through the dload process local update.... Plz help me I'm stuck....
saquib996 said:
Hey bro while flashing lollipop ROM emui 3.1 in my huawei p7 it got stuck in boot loader , so I thought to revert it back to the stock ROM and I backed up my stock ROM through twrp but when I restored it It again locked my boot loader plus its stuck in boot screen... What do I do.... How am I supposed to unlock my boot loader without knowing my phone product I'd ,imei etc.... Previously I unlocked my boot loader through the dload process local update.... Plz help me I'm stuck....
Click to expand...
Click to collapse
Hi,
i guess you have to unlock your bootloader per dload again. You can force an local update by pressing power and volume plus/minus at the same time.
Is the bootloader unlocking local update based on emui2.3? If so, you'd had to downgrade to emui 2.3 (B1xx).
To do so: Flash the downgrade packages(B8xx) first, after that the full rom(B6xx) , then the next downgrade package(B6xx) and the next rom(B1xx).
Probably your phone will boot after the first full rom flash. If it does, you could get the numbers you need, and unlock per fastboot.
l3Nni said:
Hi,
i guess you have to unlock your bootloader per dload again. You can force an local update by pressing power and volume plus/minus at the same time.
Is the bootloader unlocking local update based on emui2.3? If so, you'd had to downgrade to emui 2.3 (B1xx).
To do so: Flash the downgrade packages(B8xx) first, after that the full rom(B6xx) , then the next downgrade package(B6xx) and the next rom(B1xx).
Probably your phone will boot after the first full rom flash. If it does, you could get the numbers you need, and unlock per fastboot.
Click to expand...
Click to collapse
but bro the fact is i dont have acess to phone's internal memory how am i supposed to do... will the local update works through memory card...... i looked every thread n every posts but didnt find any solutions...... plus if i try to unlock boot from huawei official site it is demanding product id but since my phone is stuck i cant know my product id...
and thnxxx bro for ur reply....
saquib996 said:
but bro the fact is i dont have acess to phone's internal memory how am i supposed to do... will the local update works through memory card...... i looked every thread n every posts but didnt find any solutions...... plus if i try to unlock boot from huawei official site it is demanding product id but since my phone is stuck i cant know my product id...
and thnxxx bro for ur reply....
Click to expand...
Click to collapse
Yes, you could just put the update file into a folder named 'dload' in the root directory of your sd card.
l3Nni said:
Yes, you could just put the update file into a folder named 'dload' in the root directory of your sd card.
Click to expand...
Click to collapse
thankxxx bro... ur method worked.... but guess im not lucky enough because now in the update mode its showing battery less than 15% cant update.... and in bootloader i cant charge my phone, the moment i plug in the charger it automatically switch on the device and shows boot failed press volume down button to open bootloader mode.... and my phone's battery start draining instead of charging.... any help with that.... i tried to open the back cover to charge the battery externally, some how youtube taught me to open it but its conneted circuit based and cant recharge externally ..... any help:crying::crying::crying: plz.... and thanxx for ur precious time and reply ,, i deeply thank u bro for ur support..... waiting for ur further instruction.....
saquib996 said:
thankxxx bro... ur method worked.... but guess im not lucky enough because now in the update mode its showing battery less than 15% cant update.... and in bootloader i cant charge my phone, the moment i plug in the charger it automatically switch on the device and shows boot failed press volume down button to open bootloader mode.... and my phone's battery start draining instead of charging.... any help with that.... i tried to open the back cover to charge the battery externally, some how youtube taught me to open it but its conneted circuit based and cant recharge externally ..... any help:crying::crying::crying: plz....
Click to expand...
Click to collapse
You could try to boot to recovery pressing power and volume-. Does the battery charge then? I'd try myself, but my mum got my P7.. If it doesn't work you may try this script: http://forum.xda-developers.com/showthread.php?t=1658084. And if that all fails you could purchase a new battery as your final option.
Please don't try to charge your phone externally. Handling with LiOn-batterys without knowing exactly what you do could be quite dangerous.
saquib996 said:
and thanxx for ur precious time and reply ,, i deeply thank u bro for ur support..... waiting for ur further instruction.....
Click to expand...
Click to collapse
You're very welcome, I'm glad when I could help.
l3Nni said:
You're very welcome, I'm glad when I could help.
Click to expand...
Click to collapse
Bro some how my phone got charged I plugged it for the whole night and it got charged..... finally flashed with lollipop emui 3.1....
And bro sorry to bother u since u use p7 I wanted to ask that is cynogen mod available for p7 if yes then how should I flash it... I got B832 emui 3.1 and android version 5.1.1..... any idea about cynogen mod or any other rom... which one should be better....
saquib996 said:
Bro some how my phone got charged I plugged it for the whole night and it got charged..... finally flashed with lollipop emui 3.1....
And bro sorry to bother u since u use p7 I wanted to ask that is cynogen mod available for p7 if yes then how should I flash it... I got B832 emui 3.1 and android version 5.1.1..... any idea about cynogen mod or any other rom... which one should be better....
Click to expand...
Click to collapse
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.
l3Nni said:
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.
Click to expand...
Click to collapse
Ok bro thanx for the information....... gud bye take care....
saquib996 said:
There are no custom roms for lollipop, unfortunately. So you have to stick with the stock one.
Click to expand...
Click to collapse
Bro are u indian...?
Coz is there any option to change network frequency band coz in india I cannot use 4g because of network band.... plz help if u are indian u must be aware of jio network I cant use it in my phone... waiting for your reply.....
Please Help me
My Huawei Honor 4x
was locked and stay in fastboot and rescue mode
please, how to fix it ?:crying:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
well depends, are you on che2-xx or che1? because i know only about che2, and anyways, what error says in the rescue mode?
Fastboot & Rescue Mode
Thadab said:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
Click to expand...
Click to collapse
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
solution
download official rom and put update.APP to dload folder on SD card.
than turn off phone and press all three buttons together Volume + and - and power.
It will install fresh os on your phone
Amin Benzema said:
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
Click to expand...
Click to collapse
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
hackslash said:
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
Click to expand...
Click to collapse
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Amin Benzema said:
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Click to expand...
Click to collapse
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
hackslash said:
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
Click to expand...
Click to collapse
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Amin Benzema said:
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Click to expand...
Click to collapse
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
just blinking red light once and green light twice! still alive
hackslash said:
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
Click to expand...
Click to collapse
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
farzadmaverick said:
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
Click to expand...
Click to collapse
No my bro.it's Dead.you should change your mobile mother board with another honor 4x(it's expensive) or you should find a programed EMMC that exactly is for che-tl00h(almost hard to find for this model) or sell your hard bricked phone(best way like my way). Of course you can find your dump files and give them to a technician for flashing on a unprogramed EMMC,but I know you can not find dump files for this model easily.
This is a real experience for focusing on model of the phone that we purchase for next shopping.
We should just buy a Global released model,not a china model.
Persian:dadash manam az alaedin raft tu pacham,vali azin be baad faqat ye bakhshe tahghigham check kardane behtarin o bi dardesar tarin modele un dasgahie k madde nazarame.ke dg eshtebahi nakharam.
Che2-L11 ham modele khubie az honor 4x.
thank you. I already gave up and buy another phone
That's sad
U could have much before giving up , u still own it ?
gopinaidu77 said:
U could have much before giving up , u still own it ?
Click to expand...
Click to collapse
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Amin Benzema said:
Whats the solution??!
Click to expand...
Click to collapse
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Amin Benzema said:
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Click to expand...
Click to collapse
No u can still fix it buddy. I can help u
gopinaidu77 said:
No u can still fix it buddy. I can help u
Click to expand...
Click to collapse
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
That will be helpful
Amin Benzema said:
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
Click to expand...
Click to collapse
So before that , i need some info to make final solution
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
iantechie1979 said:
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
iantechie1979 said:
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Flash these files and it should, most probably, be fine.
use dload method as given here- https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
as there are many different opinions on this method of using only update.app file but thats not true and it should be all the files.
Main file - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...1812/f1/full/hw/eu/update_data_full_hw_eu.zip
Flash both the files in order. 1st file will restore your system but then you need to have 2nd file so that apps are installed and all working fine.
After 1st file, it may reboot on its own and stuck on honor logo, reboot to recovery and then do factory reset, it will be fine.
Then let it boot to set up. Dont set your phone. Shutdown and flash the 2nd file.
boot and set up.
Good luck. Please provide feedback once done. In case of further issue, let me know and will dig more into this.
Oh this is hard.
chrisleLP said:
Oh this is hard.
Click to expand...
Click to collapse
What is hard?
shashank1320 said:
What is hard?
Click to expand...
Click to collapse
This problem.
chrisleLP said:
This problem.
Click to expand...
Click to collapse
you cant follow simple instructions? you shouldnt be on this forum if youre not ready to lose data or brick your device.
Thanks for your input so far people. Much appreciated. @shashank1320 I am downloading the files you suggested and will flash them exactly according to your instructions. I will get back to you in a couple of days with the result. Fingers crossed.
gopinaidu77 said:
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
Click to expand...
Click to collapse
Unfortunately my warranty has expired. The annoying thing is that if i had sent my device off six months ago when this first happened it would still be under warranty but in the UK there is only 1 service center, yes 1, and its hundreds of miles away! So i figured i could solve it myself. You live and learn.
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
iantechie1979 said:
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
Click to expand...
Click to collapse
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
shashank1320 said:
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
Click to expand...
Click to collapse
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
iantechie1979 said:
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
Click to expand...
Click to collapse
Did you flash those files i given? If not can try. Else i will have to look for other alternative
yeah i downloaded those files you had mentioned in your post and followed the instructions to the letter.
I've got a suggestion if you have tried all these above.
Can you try the following on ADB and then try to unlock OEM again.
fastboot oem relock YourUnlockCode
I've done the same and it helped, even when bootloader displayed UNLOCKED. Please try it. :good::good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
NameNotFound74 said:
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
Click to expand...
Click to collapse
Try unlocking the bootloader again even if it is unlocked. It will factory reset the device and it should boot fine. Have stuck on this many a time and this was the method i followed.
HI, I bricked my N950u after rooting with the SamV2 method for snapdragon. I rooted it fine, then tried flashing stock firmware and supersu zip. I know snapdragon is bl locked but I thought I could possibly do something besides hard brick lol. Anyway, does a rooted n950u that they could share a partial or full sys dump with me so I can make a debrick img. Also if anyone knows how to un/debrick please let me know and share. Thanks in advance!!!!
P.s. I know it was stupid to do lol
p.p.s. if your not going to contribute to the solution and or insult my foolish decision please keep your comments to yourself, thanks
You cannot debrick. What does your phone do?
EDIT: you probably are not bricked anyway. Actually you might be bricked if you flashed stock rev1 firmware instead. That would brick you...
me2151 said:
You cannot debrick. What does your phone do?
EDIT: you probably are not bricked anyway. Actually you might be bricked if you flashed stock rev1 firmware instead. That would brick you...
Click to expand...
Click to collapse
I definitely am bricked because my pc picks the phone up as "HS-USB QDLOADER 9008" i.g. hard brick. Doesnt boot into odin, no display on the phone but vibration feedback when trying odin button combo
Vell123 said:
I definitely am bricked because my pc picks the phone up as "HS-USB QDLOADER 9008" i.g. hard brick. Doesnt boot into odin, no display on the phone but vibration feedback when trying odin button combo
Click to expand...
Click to collapse
Yup. Thats 100% a hardbrick. Unfortunatly the debrick img method doesnt work on this phone. Only way to fix at this moment is a carrier swap. Thats how I got mine fixed.
me2151 said:
Yup. Thats 100% a hardbrick. Unfortunatly the debrick img method doesnt work on this phone. Only way to fix at this moment is a carrier swap. Thats how I got mine fixed.
Click to expand...
Click to collapse
Carrier swap? can you explain a bit more? But I believe if I had a system dump for the note 8 I can make a un/debrick image just like previous Samsung devices. I'm willing to try but i dont have the software needed
Vell123 said:
Carrier swap? can you explain a bit more? But I believe if I had a system dump for the note 8 I can make a un/debrick image just like previous Samsung devices. I'm willing to try but i dont have the software needed
Click to expand...
Click to collapse
Mine died in the middle of an update and when i got it back on a computer it was in 9008. Was unable to fix it. took it to my carrier as I have insurance and they replaced it.
me2151 said:
Mine died in the middle of an update and when i got it back on a computer it was in 9008. Was unable to fix it. took it to my carrier as I have insurance and they replaced it.
Click to expand...
Click to collapse
Ahhh... definately dont have insurance. But thanks is your device rooted
Long shot but... qfil / firehose msm8998 is the way to go with this. Can be done, the hard part is getting the firehose programmer (and maybe rawprogram0 / patch0 xmls too)
Isnt it supported by Z3x / Sigma / Infinity / Octoplus?
Doesnt that "aryk" site have a load of programmer files that could work with your device?
Failing that, JTAG / EMMC flash (pinouts should be around somewhere)
Sorry can`t be more help. I`m working on a similar issue with a Moto Z2 play atm
EDIT: I`m sure the 835 (what you have) supports booting from the SD card.
You need to ask someone with a rooted Snapdragon N8 to make a copy of the first 167(ish) MB of mmcblk0
Like this... (Brief idea... whoever does this needs to do it obviously from shell, on the device itself wether thats from TWRP shell or ADB in *nix / Win thats up to you)
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
Once some kind soul has done this for you and you have downloaded it, write the resulting image to decent SD card using Win32diskimager, place in device and try booting. See if the bootloader runs enough to get you into ODIN.
YMMV but it is a recovery method for Snapdragons. Weather you overwrite EFS / Lose IMEI I don`t know. Only just getting back into Sammy scene.
It is kind of like a failsafe incase of EMMC corruption I think.
I can`t help with this sadly as I`m Exy
N10AP said:
Long shot but... qfil / firehose msm8998 is the way to go with this. Can be done, the hard part is getting the firehose programmer (and maybe rawprogram0 / patch0 xmls too)
Click to expand...
Click to collapse
Please explain a bit more
Isnt it supported by Z3x / Sigma / Infinity / Octoplus?
Click to expand...
Click to collapse
I have a z3x box
Doesnt that "aryk" site have a load of programmer files that could work with your device?
Click to expand...
Click to collapse
Please explain more if possible or provide web links
Failing that, JTAG / EMMC flash (pinouts should be around somewhere)
Sorry can`t be more help. I`m working on a similar issue with a Moto Z2 play atm
EDIT: I`m sure the 835 (what you have) supports booting from the SD card.
Click to expand...
Click to collapse
Thats what I hope to do
You need to ask someone with a rooted Snapdragon N8 to make a copy of the first 167(ish) MB of mmcblk0
Like this... (Brief idea... whoever does this needs to do it obviously from shell, on the device itself wether thats from TWRP shell or ADB in *nix / Win thats up to you)
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
Once some kind soul has done this for you and you have downloaded it, write the resulting image to decent SD card using Win32diskimager, place in device and try booting. See if the bootloader runs enough to get you into ODIN.
YMMV but it is a recovery method for Snapdragons. Weather you overwrite EFS / Lose IMEI I don`t know. Only just getting back into Sammy scene.
It is kind of like a failsafe incase of EMMC corruption I think.
I can`t help with this sadly as I`m Exy
Click to expand...
Click to collapse
Thanks for your input its help!
Vell123 said:
Thanks for your input its help!
Click to expand...
Click to collapse
I AM Rooted however all of my stuff is experimental. So my files wont work for you. Good luck though.
me2151 said:
I AM Rooted however all of my stuff is experimental. So my files wont work for you. Good luck though.
Click to expand...
Click to collapse
you cant do a backup and share files please:fingers-crossed:
Vell123 said:
you cant do a backup and share files please:fingers-crossed:
Click to expand...
Click to collapse
Sorry maybe u already tried it but here in UK there is a **** ton of mobile repair shop and in some of them are some heavy dutie geeks.
Maybe look around your area and see if you can find someone with big passion for problem solving.
Just got my Note 8. But I remember hard bricked phones in the past brought back to life with jtag devices. Anyone try Jtag device or gotten Jtag service done to hard bricked Note 8?
Last tax season was supposed to buy 1, but car issues. I know they're expensive. But if they can fix phones with ease. Then well worth it.
Vell123 said:
HI, I bricked my N950u after rooting with the SamV2 method for snapdragon. I rooted it fine, then tried flashing stock firmware and supersu zip. I know snapdragon is bl locked but I thought I could possibly do something besides hard brick lol. Anyway, does a rooted n950u that they could share a partial or full sys dump with me so I can make a debrick img. Also if anyone knows how to un/debrick please let me know and share. Thanks in advance!!!!
P.s. I know it was stupid to do lol
p.p.s. if your not going to contribute to the solution and or insult my foolish decision please keep your comments to yourself, thanks
Click to expand...
Click to collapse
did you manage to fix this? i have some unbricking files i want to test, let me know please
ProUnlocker said:
did you manage to fix this? i have some unbricking files i want to test, let me know please
Click to expand...
Click to collapse
i sent it to samsung but i going to re root and copy img partitions
I have unbrick files for flashing qdl9008 mode for bootloader rev 2.
If you are on samfail v2 or v2.5 maybe ot the normal rev 2 bootloader they should work.
Let me know if you need them.
BigCountry907 said:
I have unbrick files for flashing qdl9008 mode for bootloader rev 2.
If you are on samfail v2 or v2.5 maybe ot the normal rev 2 bootloader they should work.
Let me know if you need them.
Click to expand...
Click to collapse
I definately could use them. I am in the same boat.
Unbrick Files
guysmiley82 said:
I definately could use them. I am in the same boat.
Click to expand...
Click to collapse
Go to this thread.
I will post the files and instructions there in the thread i started for unbricking.
https://forum.xda-developers.com/galaxy-note-8/how-to/note-8-n950u-qdl9008-edl-mode-unbrick-t3851345
did you get this resolved, I am stuck only being able to go into upload mode. I can shut it off with power and vol. down but the only thing it does is go back into upload when I try button combos. bootloader 6 btw
SOLVED!!!
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
Hello everybody.
I actually have bought a NUBIA RED MAGIC 3 Europe model and after test I decided change the firmware to Cn because how you konw is more complete and better.
The problem has been that i´m traying to flash the GAPPS and I forget to do a Secure Copy whit TWRP Recovery and now, i have a importan problem.
After do differtent things with "ADB command" y delete my system, I think, becasue now i can enter to recovery mode, only acept "Fastboot mode" and never continue.
When I turn on, always go to "fastboot mode".
Can you send me a copy doing with TWRP Recovery that I could flash with ADB command???
I downloaded oficial CN and EU firmware ZIP, but, inside, it haven´t "system.img" for example and when I flash "Boot.img" and "recovery.img" I don´t get nothing.
Thank a lot and sorry but my regular english.
Please, help me.
I flash without problem "Recovery.img", or "boot.img" and other, but never continue, it came to "fastboot mode" .
I can´t enter to recovery mode, only "edload mode" and "fastboot mode"
What can I do?
sakilxda said:
Hello everybody.
I actually have bought a NUBIA RED MAGIC 3 Europe model and after test I decided change the firmware to Cn because how you konw is more complete and better.
The problem has been that i´m traying to flash the GAPPS and I forget to do a Secure Copy whit TWRP Recovery and now, i have a importan problem.
After do differtent things with "ADB command" y delete my system, I think, becasue now i can enter to recovery mode, only acept "Fastboot mode" and never continue.
When I turn on, always go to "fastboot mode".
Can you send me a copy doing with TWRP Recovery that I could flash with ADB command???
I downloaded oficial CN and EU firmware ZIP, but, inside, it haven´t "system.img" for example and when I flash "Boot.img" and "recovery.img" I don´t get nothing.
Thank a lot and sorry but my regular english.
Please, help me.
Click to expand...
Click to collapse
having the same problem, i hope someone share the system image
I´m trying to do it:
https://forum.xda-developers.com/red-magic/how-to/update-android-p-9-0-t3911002/page2
Sakilxda. I have exactly the same problem. I just left my Chinese Red Magic 3 with a cellphone service centre to try an fix it. Another xda member besides myself had exactly the same issue.
I think these cellphones are very sensitive an have not yet developed a software support base.
The other xda member with a his unit stuck in fastboot mode tried to install TWRP like I did.
These cellphones are not for tinkerers like you an me who want apk gapps or TWRP.
The software support base for them needs time to mature.
Sorry buddy.
I have switched to an Mi9 that isn't sensitive an behave in a predictable way.
Bryceicle1971 said:
Sakilxda. I have exactly the same problem. I just left my Chinese Red Magic 3 with a cellphone service centre to try an fix it. Another xda member besides myself had exactly the same issue.
I think these cellphones are very sensitive an have not yet developed a software support base.
The other xda member with a his unit stuck in fastboot mode tried to install TWRP like I did.
These cellphones are not for tinkerers like you an me who want apk gapps or TWRP.
The software support base for them needs time to mature.
Sorry buddy.
I have switched to an Mi9 that isn't sensitive an behave in a predictable way.
Click to expand...
Click to collapse
I CAN SOLVED THE PROBLEM!!!
LINK IN THE FIRST COMENT :bueno:
sakilxda said:
I CAN SOLVED THE PROBLEM!!!
LINK IN THE FIRST COMENT :bueno:
Click to expand...
Click to collapse
Awesome. I haven't heard back from the cellphone service center yet. I might give them a call later in the week
Since 8 of June I waiting...at last I get solved by myself
Bryceicle1971 said:
Sakilxda. I have exactly the same problem. I just left my Chinese Red Magic 3 with a cellphone service centre to try an fix it. Another xda member besides myself had exactly the same issue.
I think these cellphones are very sensitive an have not yet developed a software support base.
The other xda member with a his unit stuck in fastboot mode tried to install TWRP like I did.
These cellphones are not for tinkerers like you an me who want apk gapps or TWRP.
The software support base for them needs time to mature.
Sorry buddy.
I have switched to an Mi9 that isn't sensitive an behave in a predictable way.
Click to expand...
Click to collapse
You so right..i am was switched to OP7 pro..done with it..R.I.P RM3 sleeping in the shelf..
danielad200 said:
You so right..i am was switched to OP7 pro..done with it..R.I.P RM3 sleeping in the shelf..
Click to expand...
Click to collapse
There is a fix i want to try in this forum. Getting my cell back from service center tomorrow or Monday. The problem appears to be the Chinese rom reacts to flashing an needs to be tricked into being fixed. I will share if I can do it
Bryceicle1971 said:
There is a fix i want to try in this forum. Getting my cell back from service center tomorrow or Monday. The problem appears to be the Chinese rom reacts to flashing an needs to be tricked into being fixed. I will share if I can do it
Click to expand...
Click to collapse
Please update us bro
danielad200 said:
Please update us bro
Click to expand...
Click to collapse
Read the forums mate. I cannot remember where it is but it's there. It's the Chinese version cells that have this issue. More an more owners are effected by it. Flash anything at all with a Chinese ROM an your stuck in an instant fastboot loop.
The member who fixed it is listed as a junior member on XDA.
That is total nonsense as he is way cleverer than me an I'm listed as a senior member
Bryceicle1971 said:
Read the forums mate. I cannot remember where it is but it's there. It's the Chinese version cells that have this issue. More an more owners are effected by it. Flash anything at all with a Chinese ROM an your stuck in an instant fastboot loop.
The member who fixed it is listed as a junior member on XDA.
That is total nonsense as he is way cleverer than me an I'm listed as a senior member
Click to expand...
Click to collapse
https://forum.xda-developers.com/red-magic-3/how-to/soft-rocked-red-magic-3-t3935744
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ----------
It's a link to the fix that was shared with me man. My Red Magic 3 is still at the cellphone service center. I have not tested this fix.
Good luck buddy